Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 864 insertions, 0 deletions

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
new file mode 100644
index 000000000..fc8ca0f30
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017, 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#include "phy-qcom-qmp.h"
+
+/* EDP_PHY registers */
+#define DP_PHY_CFG                              0x0010
+#define DP_PHY_CFG_1                            0x0014
+#define DP_PHY_PD_CTL                           0x001c
+#define DP_PHY_MODE                             0x0020
+
+#define DP_PHY_AUX_CFG0				0x0024
+#define DP_PHY_AUX_CFG1				0x0028
+#define DP_PHY_AUX_CFG2				0x002C
+#define DP_PHY_AUX_CFG3				0x0030
+#define DP_PHY_AUX_CFG4				0x0034
+#define DP_PHY_AUX_CFG5				0x0038
+#define DP_PHY_AUX_CFG6				0x003C
+#define DP_PHY_AUX_CFG7				0x0040
+#define DP_PHY_AUX_CFG8				0x0044
+#define DP_PHY_AUX_CFG9				0x0048
+
+#define DP_PHY_AUX_INTERRUPT_MASK		0x0058
+
+#define DP_PHY_VCO_DIV                          0x0074
+#define DP_PHY_TX0_TX1_LANE_CTL                 0x007c
+#define DP_PHY_TX2_TX3_LANE_CTL                 0x00a0
+
+#define DP_PHY_STATUS                           0x00e0
+
+/* LANE_TXn registers */
+#define TXn_CLKBUF_ENABLE                       0x0000
+#define TXn_TX_EMP_POST1_LVL                    0x0004
+
+#define TXn_TX_DRV_LVL                          0x0014
+#define TXn_TX_DRV_LVL_OFFSET                   0x0018
+#define TXn_RESET_TSYNC_EN                      0x001c
+#define TXn_LDO_CONFIG                          0x0084
+#define TXn_TX_BAND                             0x0028
+
+#define TXn_RES_CODE_LANE_OFFSET_TX0            0x0044
+#define TXn_RES_CODE_LANE_OFFSET_TX1            0x0048
+
+#define TXn_TRANSCEIVER_BIAS_EN                 0x0054
+#define TXn_HIGHZ_DRVR_EN                       0x0058
+#define TXn_TX_POL_INV                          0x005c
+#define TXn_LANE_MODE_1                         0x0064
+
+#define TXn_TRAN_DRVR_EMP_EN                    0x0078
+
+struct qcom_edp_cfg {
+	bool is_dp;
+
+	/* DP PHY swing and pre_emphasis tables */
+	const u8 (*swing_hbr_rbr)[4][4];
+	const u8 (*swing_hbr3_hbr2)[4][4];
+	const u8 (*pre_emphasis_hbr_rbr)[4][4];
+	const u8 (*pre_emphasis_hbr3_hbr2)[4][4];
+};
+
+struct qcom_edp {
+	struct device *dev;
+	const struct qcom_edp_cfg *cfg;
+
+	struct phy *phy;
+
+	void __iomem *edp;
+	void __iomem *tx0;
+	void __iomem *tx1;
+	void __iomem *pll;
+
+	struct clk_hw dp_link_hw;
+	struct clk_hw dp_pixel_hw;
+
+	struct phy_configure_opts_dp dp_opts;
+
+	struct clk_bulk_data clks[2];
+	struct regulator_bulk_data supplies[2];
+};
+
+static const u8 dp_swing_hbr_rbr[4][4] = {
+	{ 0x08, 0x0f, 0x16, 0x1f },
+	{ 0x11, 0x1e, 0x1f, 0xff },
+	{ 0x16, 0x1f, 0xff, 0xff },
+	{ 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 dp_pre_emp_hbr_rbr[4][4] = {
+	{ 0x00, 0x0d, 0x14, 0x1a },
+	{ 0x00, 0x0e, 0x15, 0xff },
+	{ 0x00, 0x0e, 0xff, 0xff },
+	{ 0x03, 0xff, 0xff, 0xff }
+};
+
+static const u8 dp_swing_hbr2_hbr3[4][4] = {
+	{ 0x02, 0x12, 0x16, 0x1a },
+	{ 0x09, 0x19, 0x1f, 0xff },
+	{ 0x10, 0x1f, 0xff, 0xff },
+	{ 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 dp_pre_emp_hbr2_hbr3[4][4] = {
+	{ 0x00, 0x0c, 0x15, 0x1b },
+	{ 0x02, 0x0e, 0x16, 0xff },
+	{ 0x02, 0x11, 0xff, 0xff },
+	{ 0x04, 0xff, 0xff, 0xff }
+};
+
+static const struct qcom_edp_cfg dp_phy_cfg = {
+	.is_dp = true,
+	.swing_hbr_rbr = &dp_swing_hbr_rbr,
+	.swing_hbr3_hbr2 = &dp_swing_hbr2_hbr3,
+	.pre_emphasis_hbr_rbr = &dp_pre_emp_hbr_rbr,
+	.pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3,
+};
+
+static const u8 edp_swing_hbr_rbr[4][4] = {
+	{ 0x07, 0x0f, 0x16, 0x1f },
+	{ 0x0d, 0x16, 0x1e, 0xff },
+	{ 0x11, 0x1b, 0xff, 0xff },
+	{ 0x16, 0xff, 0xff, 0xff }
+};
+
+static const u8 edp_pre_emp_hbr_rbr[4][4] = {
+	{ 0x05, 0x12, 0x17, 0x1d },
+	{ 0x05, 0x11, 0x18, 0xff },
+	{ 0x06, 0x11, 0xff, 0xff },
+	{ 0x00, 0xff, 0xff, 0xff }
+};
+
+static const u8 edp_swing_hbr2_hbr3[4][4] = {
+	{ 0x0b, 0x11, 0x17, 0x1c },
+	{ 0x10, 0x19, 0x1f, 0xff },
+	{ 0x19, 0x1f, 0xff, 0xff },
+	{ 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 edp_pre_emp_hbr2_hbr3[4][4] = {
+	{ 0x08, 0x11, 0x17, 0x1b },
+	{ 0x00, 0x0c, 0x13, 0xff },
+	{ 0x05, 0x10, 0xff, 0xff },
+	{ 0x00, 0xff, 0xff, 0xff }
+};
+
+static const struct qcom_edp_cfg edp_phy_cfg = {
+	.is_dp = false,
+	.swing_hbr_rbr = &edp_swing_hbr_rbr,
+	.swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3,
+	.pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr,
+	.pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3,
+};
+
+static int qcom_edp_phy_init(struct phy *phy)
+{
+	struct qcom_edp *edp = phy_get_drvdata(phy);
+	const struct qcom_edp_cfg *cfg = edp->cfg;
+	int ret;
+	u8 cfg8;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
+	if (ret)
+		return ret;
+
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(edp->clks), edp->clks);
+	if (ret)
+		goto out_disable_supplies;
+
+	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+	       edp->edp + DP_PHY_PD_CTL);
+
+	/* Turn on BIAS current for PHY/PLL */
+	writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+
+	writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL);
+	msleep(20);
+
+	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+	       DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+	       edp->edp + DP_PHY_PD_CTL);
+
+	if (cfg && cfg->is_dp)
+		cfg8 = 0xb7;
+	else
+		cfg8 = 0x37;
+
+	writel(0xfc, edp->edp + DP_PHY_MODE);
+
+	writel(0x00, edp->edp + DP_PHY_AUX_CFG0);
+	writel(0x13, edp->edp + DP_PHY_AUX_CFG1);
+	writel(0x24, edp->edp + DP_PHY_AUX_CFG2);
+	writel(0x00, edp->edp + DP_PHY_AUX_CFG3);
+	writel(0x0a, edp->edp + DP_PHY_AUX_CFG4);
+	writel(0x26, edp->edp + DP_PHY_AUX_CFG5);
+	writel(0x0a, edp->edp + DP_PHY_AUX_CFG6);
+	writel(0x03, edp->edp + DP_PHY_AUX_CFG7);
+	writel(cfg8, edp->edp + DP_PHY_AUX_CFG8);
+	writel(0x03, edp->edp + DP_PHY_AUX_CFG9);
+
+	writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
+	       PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
+	       PHY_AUX_REQ_ERR_MASK, edp->edp + DP_PHY_AUX_INTERRUPT_MASK);
+
+	msleep(20);
+
+	return 0;
+
+out_disable_supplies:
+	regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies);
+
+	return ret;
+}
+
+static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configure_opts_dp *dp_opts)
+{
+	const struct qcom_edp_cfg *cfg = edp->cfg;
+	unsigned int v_level = 0;
+	unsigned int p_level = 0;
+	u8 ldo_config;
+	u8 swing;
+	u8 emph;
+	int i;
+
+	if (!cfg)
+		return 0;
+
+	for (i = 0; i < dp_opts->lanes; i++) {
+		v_level = max(v_level, dp_opts->voltage[i]);
+		p_level = max(p_level, dp_opts->pre[i]);
+	}
+
+	if (dp_opts->link_rate <= 2700) {
+		swing = (*cfg->swing_hbr_rbr)[v_level][p_level];
+		emph = (*cfg->pre_emphasis_hbr_rbr)[v_level][p_level];
+	} else {
+		swing = (*cfg->swing_hbr3_hbr2)[v_level][p_level];
+		emph = (*cfg->pre_emphasis_hbr3_hbr2)[v_level][p_level];
+	}
+
+	if (swing == 0xff || emph == 0xff)
+		return -EINVAL;
+
+	ldo_config = (cfg && cfg->is_dp) ? 0x1 : 0x0;
+
+	writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
+	writel(swing, edp->tx0 + TXn_TX_DRV_LVL);
+	writel(emph, edp->tx0 + TXn_TX_EMP_POST1_LVL);
+
+	writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
+	writel(swing, edp->tx1 + TXn_TX_DRV_LVL);
+	writel(emph, edp->tx1 + TXn_TX_EMP_POST1_LVL);
+
+	return 0;
+}
+
+static int qcom_edp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+	const struct phy_configure_opts_dp *dp_opts = &opts->dp;
+	struct qcom_edp *edp = phy_get_drvdata(phy);
+	int ret = 0;
+
+	memcpy(&edp->dp_opts, dp_opts, sizeof(*dp_opts));
+
+	if (dp_opts->set_voltages)
+		ret = qcom_edp_set_voltages(edp, dp_opts);
+
+	return ret;
+}
+
+static int qcom_edp_configure_ssc(const struct qcom_edp *edp)
+{
+	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+	u32 step1;
+	u32 step2;
+
+	switch (dp_opts->link_rate) {
+	case 1620:
+	case 2700:
+	case 8100:
+		step1 = 0x45;
+		step2 = 0x06;
+		break;
+
+	case 5400:
+		step1 = 0x5c;
+		step2 = 0x08;
+		break;
+
+	default:
+		/* Other link rates aren't supported */
+		return -EINVAL;
+	}
+
+	writel(0x01, edp->pll + QSERDES_V4_COM_SSC_EN_CENTER);
+	writel(0x00, edp->pll + QSERDES_V4_COM_SSC_ADJ_PER1);
+	writel(0x36, edp->pll + QSERDES_V4_COM_SSC_PER1);
+	writel(0x01, edp->pll + QSERDES_V4_COM_SSC_PER2);
+	writel(step1, edp->pll + QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0);
+	writel(step2, edp->pll + QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0);
+
+	return 0;
+}
+
+static int qcom_edp_configure_pll(const struct qcom_edp *edp)
+{
+	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+	u32 div_frac_start2_mode0;
+	u32 div_frac_start3_mode0;
+	u32 dec_start_mode0;
+	u32 lock_cmp1_mode0;
+	u32 lock_cmp2_mode0;
+	u32 hsclk_sel;
+
+	switch (dp_opts->link_rate) {
+	case 1620:
+		hsclk_sel = 0x5;
+		dec_start_mode0 = 0x69;
+		div_frac_start2_mode0 = 0x80;
+		div_frac_start3_mode0 = 0x07;
+		lock_cmp1_mode0 = 0x6f;
+		lock_cmp2_mode0 = 0x08;
+		break;
+
+	case 2700:
+		hsclk_sel = 0x3;
+		dec_start_mode0 = 0x69;
+		div_frac_start2_mode0 = 0x80;
+		div_frac_start3_mode0 = 0x07;
+		lock_cmp1_mode0 = 0x0f;
+		lock_cmp2_mode0 = 0x0e;
+		break;
+
+	case 5400:
+		hsclk_sel = 0x1;
+		dec_start_mode0 = 0x8c;
+		div_frac_start2_mode0 = 0x00;
+		div_frac_start3_mode0 = 0x0a;
+		lock_cmp1_mode0 = 0x1f;
+		lock_cmp2_mode0 = 0x1c;
+		break;
+
+	case 8100:
+		hsclk_sel = 0x0;
+		dec_start_mode0 = 0x69;
+		div_frac_start2_mode0 = 0x80;
+		div_frac_start3_mode0 = 0x07;
+		lock_cmp1_mode0 = 0x2f;
+		lock_cmp2_mode0 = 0x2a;
+		break;
+
+	default:
+		/* Other link rates aren't supported */
+		return -EINVAL;
+	}
+
+	writel(0x01, edp->pll + QSERDES_V4_COM_SVS_MODE_CLK_SEL);
+	writel(0x0b, edp->pll + QSERDES_V4_COM_SYSCLK_EN_SEL);
+	writel(0x02, edp->pll + QSERDES_V4_COM_SYS_CLK_CTRL);
+	writel(0x0c, edp->pll + QSERDES_V4_COM_CLK_ENABLE1);
+	writel(0x06, edp->pll + QSERDES_V4_COM_SYSCLK_BUF_ENABLE);
+	writel(0x30, edp->pll + QSERDES_V4_COM_CLK_SELECT);
+	writel(hsclk_sel, edp->pll + QSERDES_V4_COM_HSCLK_SEL);
+	writel(0x0f, edp->pll + QSERDES_V4_COM_PLL_IVCO);
+	writel(0x08, edp->pll + QSERDES_V4_COM_LOCK_CMP_EN);
+	writel(0x36, edp->pll + QSERDES_V4_COM_PLL_CCTRL_MODE0);
+	writel(0x16, edp->pll + QSERDES_V4_COM_PLL_RCTRL_MODE0);
+	writel(0x06, edp->pll + QSERDES_V4_COM_CP_CTRL_MODE0);
+	writel(dec_start_mode0, edp->pll + QSERDES_V4_COM_DEC_START_MODE0);
+	writel(0x00, edp->pll + QSERDES_V4_COM_DIV_FRAC_START1_MODE0);
+	writel(div_frac_start2_mode0, edp->pll + QSERDES_V4_COM_DIV_FRAC_START2_MODE0);
+	writel(div_frac_start3_mode0, edp->pll + QSERDES_V4_COM_DIV_FRAC_START3_MODE0);
+	writel(0x02, edp->pll + QSERDES_V4_COM_CMN_CONFIG);
+	writel(0x3f, edp->pll + QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0);
+	writel(0x00, edp->pll + QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0);
+	writel(0x00, edp->pll + QSERDES_V4_COM_VCO_TUNE_MAP);
+	writel(lock_cmp1_mode0, edp->pll + QSERDES_V4_COM_LOCK_CMP1_MODE0);
+	writel(lock_cmp2_mode0, edp->pll + QSERDES_V4_COM_LOCK_CMP2_MODE0);
+
+	writel(0x0a, edp->pll + QSERDES_V4_COM_BG_TIMER);
+	writel(0x14, edp->pll + QSERDES_V4_COM_CORECLK_DIV_MODE0);
+	writel(0x00, edp->pll + QSERDES_V4_COM_VCO_TUNE_CTRL);
+	writel(0x17, edp->pll + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
+	writel(0x0f, edp->pll + QSERDES_V4_COM_CORE_CLK_EN);
+	writel(0xa0, edp->pll + QSERDES_V4_COM_VCO_TUNE1_MODE0);
+	writel(0x03, edp->pll + QSERDES_V4_COM_VCO_TUNE2_MODE0);
+
+	return 0;
+}
+
+static int qcom_edp_set_vco_div(const struct qcom_edp *edp, unsigned long *pixel_freq)
+{
+	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+	u32 vco_div;
+
+	switch (dp_opts->link_rate) {
+	case 1620:
+		vco_div = 0x1;
+		*pixel_freq = 1620000000UL / 2;
+		break;
+
+	case 2700:
+		vco_div = 0x1;
+		*pixel_freq = 2700000000UL / 2;
+		break;
+
+	case 5400:
+		vco_div = 0x2;
+		*pixel_freq = 5400000000UL / 4;
+		break;
+
+	case 8100:
+		vco_div = 0x0;
+		*pixel_freq = 8100000000UL / 6;
+		break;
+
+	default:
+		/* Other link rates aren't supported */
+		return -EINVAL;
+	}
+
+	writel(vco_div, edp->edp + DP_PHY_VCO_DIV);
+
+	return 0;
+}
+
+static int qcom_edp_phy_power_on(struct phy *phy)
+{
+	const struct qcom_edp *edp = phy_get_drvdata(phy);
+	const struct qcom_edp_cfg *cfg = edp->cfg;
+	u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
+	unsigned long pixel_freq;
+	u8 ldo_config;
+	int timeout;
+	int ret;
+	u32 val;
+	u8 cfg1;
+
+	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
+	       DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
+	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
+	       edp->edp + DP_PHY_PD_CTL);
+	writel(0xfc, edp->edp + DP_PHY_MODE);
+
+	timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_CMN_STATUS,
+				     val, val & BIT(7), 5, 200);
+	if (timeout)
+		return timeout;
+
+
+	ldo_config = (cfg && cfg->is_dp) ? 0x1 : 0x0;
+
+	writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
+	writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
+	writel(0x00, edp->tx0 + TXn_LANE_MODE_1);
+	writel(0x00, edp->tx1 + TXn_LANE_MODE_1);
+
+	if (edp->dp_opts.ssc) {
+		ret = qcom_edp_configure_ssc(edp);
+		if (ret)
+			return ret;
+	}
+
+	ret = qcom_edp_configure_pll(edp);
+	if (ret)
+		return ret;
+
+	/* TX Lane configuration */
+	writel(0x05, edp->edp + DP_PHY_TX0_TX1_LANE_CTL);
+	writel(0x05, edp->edp + DP_PHY_TX2_TX3_LANE_CTL);
+
+	/* TX-0 register configuration */
+	writel(0x03, edp->tx0 + TXn_TRANSCEIVER_BIAS_EN);
+	writel(0x0f, edp->tx0 + TXn_CLKBUF_ENABLE);
+	writel(0x03, edp->tx0 + TXn_RESET_TSYNC_EN);
+	writel(0x01, edp->tx0 + TXn_TRAN_DRVR_EMP_EN);
+	writel(0x04, edp->tx0 + TXn_TX_BAND);
+
+	/* TX-1 register configuration */
+	writel(0x03, edp->tx1 + TXn_TRANSCEIVER_BIAS_EN);
+	writel(0x0f, edp->tx1 + TXn_CLKBUF_ENABLE);
+	writel(0x03, edp->tx1 + TXn_RESET_TSYNC_EN);
+	writel(0x01, edp->tx1 + TXn_TRAN_DRVR_EMP_EN);
+	writel(0x04, edp->tx1 + TXn_TX_BAND);
+
+	ret = qcom_edp_set_vco_div(edp, &pixel_freq);
+	if (ret)
+		return ret;
+
+	writel(0x01, edp->edp + DP_PHY_CFG);
+	writel(0x05, edp->edp + DP_PHY_CFG);
+	writel(0x01, edp->edp + DP_PHY_CFG);
+	writel(0x09, edp->edp + DP_PHY_CFG);
+
+	writel(0x20, edp->pll + QSERDES_V4_COM_RESETSM_CNTRL);
+
+	timeout = readl_poll_timeout(edp->pll + QSERDES_V4_COM_C_READY_STATUS,
+				     val, val & BIT(0), 500, 10000);
+	if (timeout)
+		return timeout;
+
+	writel(0x19, edp->edp + DP_PHY_CFG);
+	writel(0x1f, edp->tx0 + TXn_HIGHZ_DRVR_EN);
+	writel(0x04, edp->tx0 + TXn_HIGHZ_DRVR_EN);
+	writel(0x00, edp->tx0 + TXn_TX_POL_INV);
+	writel(0x1f, edp->tx1 + TXn_HIGHZ_DRVR_EN);
+	writel(0x04, edp->tx1 + TXn_HIGHZ_DRVR_EN);
+	writel(0x00, edp->tx1 + TXn_TX_POL_INV);
+	writel(0x10, edp->tx0 + TXn_TX_DRV_LVL_OFFSET);
+	writel(0x10, edp->tx1 + TXn_TX_DRV_LVL_OFFSET);
+	writel(0x11, edp->tx0 + TXn_RES_CODE_LANE_OFFSET_TX0);
+	writel(0x11, edp->tx0 + TXn_RES_CODE_LANE_OFFSET_TX1);
+	writel(0x11, edp->tx1 + TXn_RES_CODE_LANE_OFFSET_TX0);
+	writel(0x11, edp->tx1 + TXn_RES_CODE_LANE_OFFSET_TX1);
+
+	writel(0x10, edp->tx0 + TXn_TX_EMP_POST1_LVL);
+	writel(0x10, edp->tx1 + TXn_TX_EMP_POST1_LVL);
+	writel(0x1f, edp->tx0 + TXn_TX_DRV_LVL);
+	writel(0x1f, edp->tx1 + TXn_TX_DRV_LVL);
+
+	if (edp->dp_opts.lanes == 1) {
+		bias0_en = 0x01;
+		bias1_en = 0x00;
+		drvr0_en = 0x06;
+		drvr1_en = 0x07;
+		cfg1 = 0x1;
+	} else if (edp->dp_opts.lanes == 2) {
+		bias0_en = 0x03;
+		bias1_en = 0x00;
+		drvr0_en = 0x04;
+		drvr1_en = 0x07;
+		cfg1 = 0x3;
+	} else {
+		bias0_en = 0x03;
+		bias1_en = 0x03;
+		drvr0_en = 0x04;
+		drvr1_en = 0x04;
+		cfg1 = 0xf;
+	}
+
+	writel(drvr0_en, edp->tx0 + TXn_HIGHZ_DRVR_EN);
+	writel(bias0_en, edp->tx0 + TXn_TRANSCEIVER_BIAS_EN);
+	writel(drvr1_en, edp->tx1 + TXn_HIGHZ_DRVR_EN);
+	writel(bias1_en, edp->tx1 + TXn_TRANSCEIVER_BIAS_EN);
+	writel(cfg1, edp->edp + DP_PHY_CFG_1);
+
+	writel(0x18, edp->edp + DP_PHY_CFG);
+	usleep_range(100, 1000);
+
+	writel(0x19, edp->edp + DP_PHY_CFG);
+
+	ret = readl_poll_timeout(edp->edp + DP_PHY_STATUS,
+				 val, val & BIT(1), 500, 10000);
+	if (ret)
+		return ret;
+
+	clk_set_rate(edp->dp_link_hw.clk, edp->dp_opts.link_rate * 100000);
+	clk_set_rate(edp->dp_pixel_hw.clk, pixel_freq);
+
+	return 0;
+}
+
+static int qcom_edp_phy_power_off(struct phy *phy)
+{
+	const struct qcom_edp *edp = phy_get_drvdata(phy);
+
+	writel(DP_PHY_PD_CTL_PSR_PWRDN, edp->edp + DP_PHY_PD_CTL);
+
+	return 0;
+}
+
+static int qcom_edp_phy_exit(struct phy *phy)
+{
+	struct qcom_edp *edp = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(ARRAY_SIZE(edp->clks), edp->clks);
+	regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies);
+
+	return 0;
+}
+
+static const struct phy_ops qcom_edp_ops = {
+	.init		= qcom_edp_phy_init,
+	.configure	= qcom_edp_phy_configure,
+	.power_on	= qcom_edp_phy_power_on,
+	.power_off	= qcom_edp_phy_power_off,
+	.exit		= qcom_edp_phy_exit,
+	.owner		= THIS_MODULE,
+};
+
+/*
+ * Embedded Display Port PLL driver block diagram for branch clocks
+ *
+ *              +------------------------------+
+ *              |        EDP_VCO_CLK           |
+ *              |                              |
+ *              |    +-------------------+     |
+ *              |    |  (EDP PLL/VCO)    |     |
+ *              |    +---------+---------+     |
+ *              |              v               |
+ *              |   +----------+-----------+   |
+ *              |   | hsclk_divsel_clk_src |   |
+ *              |   +----------+-----------+   |
+ *              +------------------------------+
+ *                              |
+ *          +---------<---------v------------>----------+
+ *          |                                           |
+ * +--------v----------------+                          |
+ * |   edp_phy_pll_link_clk  |                          |
+ * |     link_clk            |                          |
+ * +--------+----------------+                          |
+ *          |                                           |
+ *          |                                           |
+ *          v                                           v
+ * Input to DISPCC block                                |
+ * for link clk, crypto clk                             |
+ * and interface clock                                  |
+ *                                                      |
+ *                                                      |
+ *      +--------<------------+-----------------+---<---+
+ *      |                     |                 |
+ * +----v---------+  +--------v-----+  +--------v------+
+ * | vco_divided  |  | vco_divided  |  | vco_divided   |
+ * |    _clk_src  |  |    _clk_src  |  |    _clk_src   |
+ * |              |  |              |  |               |
+ * |divsel_six    |  |  divsel_two  |  |  divsel_four  |
+ * +-------+------+  +-----+--------+  +--------+------+
+ *         |                 |                  |
+ *         v---->----------v-------------<------v
+ *                         |
+ *              +----------+-----------------+
+ *              |   edp_phy_pll_vco_div_clk  |
+ *              +---------+------------------+
+ *                        |
+ *                        v
+ *              Input to DISPCC block
+ *              for EDP pixel clock
+ *
+ */
+static int qcom_edp_dp_pixel_clk_determine_rate(struct clk_hw *hw,
+						struct clk_rate_request *req)
+{
+	switch (req->rate) {
+	case 1620000000UL / 2:
+	case 2700000000UL / 2:
+	/* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static unsigned long
+qcom_edp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	const struct qcom_edp *edp = container_of(hw, struct qcom_edp, dp_pixel_hw);
+	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+
+	switch (dp_opts->link_rate) {
+	case 1620:
+		return 1620000000UL / 2;
+	case 2700:
+		return 2700000000UL / 2;
+	case 5400:
+		return 5400000000UL / 4;
+	case 8100:
+		return 8100000000UL / 6;
+	default:
+		return 0;
+	}
+}
+
+static const struct clk_ops qcom_edp_dp_pixel_clk_ops = {
+	.determine_rate = qcom_edp_dp_pixel_clk_determine_rate,
+	.recalc_rate = qcom_edp_dp_pixel_clk_recalc_rate,
+};
+
+static int qcom_edp_dp_link_clk_determine_rate(struct clk_hw *hw,
+					       struct clk_rate_request *req)
+{
+	switch (req->rate) {
+	case 162000000:
+	case 270000000:
+	case 540000000:
+	case 810000000:
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static unsigned long
+qcom_edp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	const struct qcom_edp *edp = container_of(hw, struct qcom_edp, dp_link_hw);
+	const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+
+	switch (dp_opts->link_rate) {
+	case 1620:
+	case 2700:
+	case 5400:
+	case 8100:
+		return dp_opts->link_rate * 100000;
+
+	default:
+		return 0;
+	}
+}
+
+static const struct clk_ops qcom_edp_dp_link_clk_ops = {
+	.determine_rate = qcom_edp_dp_link_clk_determine_rate,
+	.recalc_rate = qcom_edp_dp_link_clk_recalc_rate,
+};
+
+static int qcom_edp_clks_register(struct qcom_edp *edp, struct device_node *np)
+{
+	struct clk_hw_onecell_data *data;
+	struct clk_init_data init = { };
+	char name[64];
+	int ret;
+
+	data = devm_kzalloc(edp->dev, struct_size(data, hws, 2), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	snprintf(name, sizeof(name), "%s::link_clk", dev_name(edp->dev));
+	init.ops = &qcom_edp_dp_link_clk_ops;
+	init.name = name;
+	edp->dp_link_hw.init = &init;
+	ret = devm_clk_hw_register(edp->dev, &edp->dp_link_hw);
+	if (ret)
+		return ret;
+
+	snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(edp->dev));
+	init.ops = &qcom_edp_dp_pixel_clk_ops;
+	init.name = name;
+	edp->dp_pixel_hw.init = &init;
+	ret = devm_clk_hw_register(edp->dev, &edp->dp_pixel_hw);
+	if (ret)
+		return ret;
+
+	data->hws[0] = &edp->dp_link_hw;
+	data->hws[1] = &edp->dp_pixel_hw;
+	data->num = 2;
+
+	return devm_of_clk_add_hw_provider(edp->dev, of_clk_hw_onecell_get, data);
+}
+
+static int qcom_edp_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct qcom_edp *edp;
+	int ret;
+
+	edp = devm_kzalloc(dev, sizeof(*edp), GFP_KERNEL);
+	if (!edp)
+		return -ENOMEM;
+
+	edp->dev = dev;
+	edp->cfg = of_device_get_match_data(&pdev->dev);
+
+	edp->edp = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(edp->edp))
+		return PTR_ERR(edp->edp);
+
+	edp->tx0 = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(edp->tx0))
+		return PTR_ERR(edp->tx0);
+
+	edp->tx1 = devm_platform_ioremap_resource(pdev, 2);
+	if (IS_ERR(edp->tx1))
+		return PTR_ERR(edp->tx1);
+
+	edp->pll = devm_platform_ioremap_resource(pdev, 3);
+	if (IS_ERR(edp->pll))
+		return PTR_ERR(edp->pll);
+
+	edp->clks[0].id = "aux";
+	edp->clks[1].id = "cfg_ahb";
+	ret = devm_clk_bulk_get(dev, ARRAY_SIZE(edp->clks), edp->clks);
+	if (ret)
+		return ret;
+
+	edp->supplies[0].supply = "vdda-phy";
+	edp->supplies[1].supply = "vdda-pll";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
+	if (ret)
+		return ret;
+
+	ret = regulator_set_load(edp->supplies[0].consumer, 21800); /* 1.2 V vdda-phy */
+	if (ret) {
+		dev_err(dev, "failed to set load at %s\n", edp->supplies[0].supply);
+		return ret;
+	}
+
+	ret = regulator_set_load(edp->supplies[1].consumer, 36000); /* 0.9 V vdda-pll */
+	if (ret) {
+		dev_err(dev, "failed to set load at %s\n", edp->supplies[1].supply);
+		return ret;
+	}
+
+	ret = qcom_edp_clks_register(edp, pdev->dev.of_node);
+	if (ret)
+		return ret;
+
+	edp->phy = devm_phy_create(dev, pdev->dev.of_node, &qcom_edp_ops);
+	if (IS_ERR(edp->phy)) {
+		dev_err(dev, "failed to register phy\n");
+		return PTR_ERR(edp->phy);
+	}
+
+	phy_set_drvdata(edp->phy, edp);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id qcom_edp_phy_match_table[] = {
+	{ .compatible = "qcom,sc7280-edp-phy" },
+	{ .compatible = "qcom,sc8180x-edp-phy" },
+	{ .compatible = "qcom,sc8280xp-dp-phy", .data = &dp_phy_cfg },
+	{ .compatible = "qcom,sc8280xp-edp-phy", .data = &edp_phy_cfg },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_edp_phy_match_table);
+
+static struct platform_driver qcom_edp_phy_driver = {
+	.probe		= qcom_edp_phy_probe,
+	.driver = {
+		.name	= "qcom-edp-phy",
+		.of_match_table = qcom_edp_phy_match_table,
+	},
+};
+
+module_platform_driver(qcom_edp_phy_driver);
+
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm eDP QMP PHY driver");
+MODULE_LICENSE("GPL v2");