Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 581 insertions, 0 deletions

diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
new file mode 100644
index 000000000..7b213825f
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PIPE USB3.0 PCIE SATA Combo Phy driver
+ *
+ * Copyright (C) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/units.h>
+
+#define BIT_WRITEABLE_SHIFT		16
+#define REF_CLOCK_24MHz			(24 * HZ_PER_MHZ)
+#define REF_CLOCK_25MHz			(25 * HZ_PER_MHZ)
+#define REF_CLOCK_100MHz		(100 * HZ_PER_MHZ)
+
+/* COMBO PHY REG */
+#define PHYREG6				0x14
+#define PHYREG6_PLL_DIV_MASK		GENMASK(7, 6)
+#define PHYREG6_PLL_DIV_SHIFT		6
+#define PHYREG6_PLL_DIV_2		1
+
+#define PHYREG7				0x18
+#define PHYREG7_TX_RTERM_MASK		GENMASK(7, 4)
+#define PHYREG7_TX_RTERM_SHIFT		4
+#define PHYREG7_TX_RTERM_50OHM		8
+#define PHYREG7_RX_RTERM_MASK		GENMASK(3, 0)
+#define PHYREG7_RX_RTERM_SHIFT		0
+#define PHYREG7_RX_RTERM_44OHM		15
+
+#define PHYREG8				0x1C
+#define PHYREG8_SSC_EN			BIT(4)
+
+#define PHYREG11			0x28
+#define PHYREG11_SU_TRIM_0_7		0xF0
+
+#define PHYREG12			0x2C
+#define PHYREG12_PLL_LPF_ADJ_VALUE	4
+
+#define PHYREG13			0x30
+#define PHYREG13_RESISTER_MASK		GENMASK(5, 4)
+#define PHYREG13_RESISTER_SHIFT		0x4
+#define PHYREG13_RESISTER_HIGH_Z	3
+#define PHYREG13_CKRCV_AMP0		BIT(7)
+
+#define PHYREG14			0x34
+#define PHYREG14_CKRCV_AMP1		BIT(0)
+
+#define PHYREG15			0x38
+#define PHYREG15_CTLE_EN		BIT(0)
+#define PHYREG15_SSC_CNT_MASK		GENMASK(7, 6)
+#define PHYREG15_SSC_CNT_SHIFT		6
+#define PHYREG15_SSC_CNT_VALUE		1
+
+#define PHYREG16			0x3C
+#define PHYREG16_SSC_CNT_VALUE		0x5f
+
+#define PHYREG18			0x44
+#define PHYREG18_PLL_LOOP		0x32
+
+#define PHYREG32			0x7C
+#define PHYREG32_SSC_MASK		GENMASK(7, 4)
+#define PHYREG32_SSC_DIR_SHIFT		4
+#define PHYREG32_SSC_UPWARD		0
+#define PHYREG32_SSC_DOWNWARD		1
+#define PHYREG32_SSC_OFFSET_SHIFT	6
+#define PHYREG32_SSC_OFFSET_500PPM	1
+
+#define PHYREG33			0x80
+#define PHYREG33_PLL_KVCO_MASK		GENMASK(4, 2)
+#define PHYREG33_PLL_KVCO_SHIFT		2
+#define PHYREG33_PLL_KVCO_VALUE		2
+
+struct rockchip_combphy_priv;
+
+struct combphy_reg {
+	u16 offset;
+	u16 bitend;
+	u16 bitstart;
+	u16 disable;
+	u16 enable;
+};
+
+struct rockchip_combphy_grfcfg {
+	struct combphy_reg pcie_mode_set;
+	struct combphy_reg usb_mode_set;
+	struct combphy_reg sgmii_mode_set;
+	struct combphy_reg qsgmii_mode_set;
+	struct combphy_reg pipe_rxterm_set;
+	struct combphy_reg pipe_txelec_set;
+	struct combphy_reg pipe_txcomp_set;
+	struct combphy_reg pipe_clk_25m;
+	struct combphy_reg pipe_clk_100m;
+	struct combphy_reg pipe_phymode_sel;
+	struct combphy_reg pipe_rate_sel;
+	struct combphy_reg pipe_rxterm_sel;
+	struct combphy_reg pipe_txelec_sel;
+	struct combphy_reg pipe_txcomp_sel;
+	struct combphy_reg pipe_clk_ext;
+	struct combphy_reg pipe_sel_usb;
+	struct combphy_reg pipe_sel_qsgmii;
+	struct combphy_reg pipe_phy_status;
+	struct combphy_reg con0_for_pcie;
+	struct combphy_reg con1_for_pcie;
+	struct combphy_reg con2_for_pcie;
+	struct combphy_reg con3_for_pcie;
+	struct combphy_reg con0_for_sata;
+	struct combphy_reg con1_for_sata;
+	struct combphy_reg con2_for_sata;
+	struct combphy_reg con3_for_sata;
+	struct combphy_reg pipe_con0_for_sata;
+	struct combphy_reg pipe_xpcs_phy_ready;
+};
+
+struct rockchip_combphy_cfg {
+	const struct rockchip_combphy_grfcfg *grfcfg;
+	int (*combphy_cfg)(struct rockchip_combphy_priv *priv);
+};
+
+struct rockchip_combphy_priv {
+	u8 type;
+	void __iomem *mmio;
+	int num_clks;
+	struct clk_bulk_data *clks;
+	struct device *dev;
+	struct regmap *pipe_grf;
+	struct regmap *phy_grf;
+	struct phy *phy;
+	struct reset_control *phy_rst;
+	const struct rockchip_combphy_cfg *cfg;
+	bool enable_ssc;
+	bool ext_refclk;
+	struct clk *refclk;
+};
+
+static void rockchip_combphy_updatel(struct rockchip_combphy_priv *priv,
+				     int mask, int val, int reg)
+{
+	unsigned int temp;
+
+	temp = readl(priv->mmio + reg);
+	temp = (temp & ~(mask)) | val;
+	writel(temp, priv->mmio + reg);
+}
+
+static int rockchip_combphy_param_write(struct regmap *base,
+					const struct combphy_reg *reg, bool en)
+{
+	u32 val, mask, tmp;
+
+	tmp = en ? reg->enable : reg->disable;
+	mask = GENMASK(reg->bitend, reg->bitstart);
+	val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+	return regmap_write(base, reg->offset, val);
+}
+
+static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv)
+{
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	u32 mask, val;
+
+	mask = GENMASK(cfg->pipe_phy_status.bitend,
+		       cfg->pipe_phy_status.bitstart);
+
+	regmap_read(priv->phy_grf, cfg->pipe_phy_status.offset, &val);
+	val = (val & mask) >> cfg->pipe_phy_status.bitstart;
+
+	return val;
+}
+
+static int rockchip_combphy_init(struct phy *phy)
+{
+	struct rockchip_combphy_priv *priv = phy_get_drvdata(phy);
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	u32 val;
+	int ret;
+
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		dev_err(priv->dev, "failed to enable clks\n");
+		return ret;
+	}
+
+	switch (priv->type) {
+	case PHY_TYPE_PCIE:
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_SATA:
+	case PHY_TYPE_SGMII:
+	case PHY_TYPE_QSGMII:
+		if (priv->cfg->combphy_cfg)
+			ret = priv->cfg->combphy_cfg(priv);
+		break;
+	default:
+		dev_err(priv->dev, "incompatible PHY type\n");
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ret) {
+		dev_err(priv->dev, "failed to init phy for phy type %x\n", priv->type);
+		goto err_clk;
+	}
+
+	ret = reset_control_deassert(priv->phy_rst);
+	if (ret)
+		goto err_clk;
+
+	if (priv->type == PHY_TYPE_USB3) {
+		ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready,
+						priv, val,
+						val == cfg->pipe_phy_status.enable,
+						10, 1000);
+		if (ret)
+			dev_warn(priv->dev, "wait phy status ready timeout\n");
+	}
+
+	return 0;
+
+err_clk:
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+
+	return ret;
+}
+
+static int rockchip_combphy_exit(struct phy *phy)
+{
+	struct rockchip_combphy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	reset_control_assert(priv->phy_rst);
+
+	return 0;
+}
+
+static const struct phy_ops rochchip_combphy_ops = {
+	.init = rockchip_combphy_init,
+	.exit = rockchip_combphy_exit,
+	.owner = THIS_MODULE,
+};
+
+static struct phy *rockchip_combphy_xlate(struct device *dev, struct of_phandle_args *args)
+{
+	struct rockchip_combphy_priv *priv = dev_get_drvdata(dev);
+
+	if (args->args_count != 1) {
+		dev_err(dev, "invalid number of arguments\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (priv->type != PHY_NONE && priv->type != args->args[0])
+		dev_warn(dev, "phy type select %d overwriting type %d\n",
+			 args->args[0], priv->type);
+
+	priv->type = args->args[0];
+
+	return priv->phy;
+}
+
+static int rockchip_combphy_parse_dt(struct device *dev, struct rockchip_combphy_priv *priv)
+{
+	int i;
+
+	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
+	if (priv->num_clks < 1)
+		return -EINVAL;
+
+	priv->refclk = NULL;
+	for (i = 0; i < priv->num_clks; i++) {
+		if (!strncmp(priv->clks[i].id, "ref", 3)) {
+			priv->refclk = priv->clks[i].clk;
+			break;
+		}
+	}
+
+	if (!priv->refclk) {
+		dev_err(dev, "no refclk found\n");
+		return -EINVAL;
+	}
+
+	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-grf");
+	if (IS_ERR(priv->pipe_grf)) {
+		dev_err(dev, "failed to find peri_ctrl pipe-grf regmap\n");
+		return PTR_ERR(priv->pipe_grf);
+	}
+
+	priv->phy_grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,pipe-phy-grf");
+	if (IS_ERR(priv->phy_grf)) {
+		dev_err(dev, "failed to find peri_ctrl pipe-phy-grf regmap\n");
+		return PTR_ERR(priv->phy_grf);
+	}
+
+	priv->enable_ssc = device_property_present(dev, "rockchip,enable-ssc");
+
+	priv->ext_refclk = device_property_present(dev, "rockchip,ext-refclk");
+
+	priv->phy_rst = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(priv->phy_rst))
+		return dev_err_probe(dev, PTR_ERR(priv->phy_rst), "failed to get phy reset\n");
+
+	return 0;
+}
+
+static int rockchip_combphy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct rockchip_combphy_priv *priv;
+	const struct rockchip_combphy_cfg *phy_cfg;
+	struct resource *res;
+	int ret;
+
+	phy_cfg = of_device_get_match_data(dev);
+	if (!phy_cfg) {
+		dev_err(dev, "no OF match data provided\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->mmio = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->mmio)) {
+		ret = PTR_ERR(priv->mmio);
+		return ret;
+	}
+
+	priv->dev = dev;
+	priv->type = PHY_NONE;
+	priv->cfg = phy_cfg;
+
+	ret = rockchip_combphy_parse_dt(dev, priv);
+	if (ret)
+		return ret;
+
+	ret = reset_control_assert(priv->phy_rst);
+	if (ret) {
+		dev_err(dev, "failed to reset phy\n");
+		return ret;
+	}
+
+	priv->phy = devm_phy_create(dev, NULL, &rochchip_combphy_ops);
+	if (IS_ERR(priv->phy)) {
+		dev_err(dev, "failed to create combphy\n");
+		return PTR_ERR(priv->phy);
+	}
+
+	dev_set_drvdata(dev, priv);
+	phy_set_drvdata(priv->phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, rockchip_combphy_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int rk3568_combphy_cfg(struct rockchip_combphy_priv *priv)
+{
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	unsigned long rate;
+	u32 val;
+
+	switch (priv->type) {
+	case PHY_TYPE_PCIE:
+		/* Set SSC downward spread spectrum. */
+		rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
+					 PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
+					 PHYREG32);
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
+		break;
+
+	case PHY_TYPE_USB3:
+		/* Set SSC downward spread spectrum. */
+		rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK,
+					 PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT,
+					 PHYREG32);
+
+		/* Enable adaptive CTLE for USB3.0 Rx. */
+		val = readl(priv->mmio + PHYREG15);
+		val |= PHYREG15_CTLE_EN;
+		writel(val, priv->mmio + PHYREG15);
+
+		/* Set PLL KVCO fine tuning signals. */
+		rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
+					 PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT,
+					 PHYREG33);
+
+		/* Enable controlling random jitter. */
+		writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
+
+		/* Set PLL input clock divider 1/2. */
+		rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
+					 PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT,
+					 PHYREG6);
+
+		writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
+		writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_usb, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true);
+		break;
+
+	case PHY_TYPE_SATA:
+		/* Enable adaptive CTLE for SATA Rx. */
+		val = readl(priv->mmio + PHYREG15);
+		val |= PHYREG15_CTLE_EN;
+		writel(val, priv->mmio + PHYREG15);
+		/*
+		 * Set tx_rterm=50ohm and rx_rterm=44ohm for SATA.
+		 * 0: 60ohm, 8: 50ohm 15: 44ohm (by step abort 1ohm)
+		 */
+		val = PHYREG7_TX_RTERM_50OHM << PHYREG7_TX_RTERM_SHIFT;
+		val |= PHYREG7_RX_RTERM_44OHM << PHYREG7_RX_RTERM_SHIFT;
+		writel(val, priv->mmio + PHYREG7);
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true);
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
+		break;
+
+	case PHY_TYPE_SGMII:
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->sgmii_mode_set, true);
+		break;
+
+	case PHY_TYPE_QSGMII:
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_xpcs_phy_ready, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_phymode_sel, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_rate_sel, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_sel_qsgmii, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->qsgmii_mode_set, true);
+		break;
+
+	default:
+		dev_err(priv->dev, "incompatible PHY type\n");
+		return -EINVAL;
+	}
+
+	rate = clk_get_rate(priv->refclk);
+
+	switch (rate) {
+	case REF_CLOCK_24MHz:
+		if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) {
+			/* Set ssc_cnt[9:0]=0101111101 & 31.5KHz. */
+			val = PHYREG15_SSC_CNT_VALUE << PHYREG15_SSC_CNT_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG15_SSC_CNT_MASK,
+						 val, PHYREG15);
+
+			writel(PHYREG16_SSC_CNT_VALUE, priv->mmio + PHYREG16);
+		}
+		break;
+
+	case REF_CLOCK_25MHz:
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true);
+		break;
+
+	case REF_CLOCK_100MHz:
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
+		if (priv->type == PHY_TYPE_PCIE) {
+			/* PLL KVCO  fine tuning. */
+			val = PHYREG33_PLL_KVCO_VALUE << PHYREG33_PLL_KVCO_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG33_PLL_KVCO_MASK,
+						 val, PHYREG33);
+
+			/* Enable controlling random jitter. */
+			writel(PHYREG12_PLL_LPF_ADJ_VALUE, priv->mmio + PHYREG12);
+
+			val = PHYREG6_PLL_DIV_2 << PHYREG6_PLL_DIV_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG6_PLL_DIV_MASK,
+						 val, PHYREG6);
+
+			writel(PHYREG18_PLL_LOOP, priv->mmio + PHYREG18);
+			writel(PHYREG11_SU_TRIM_0_7, priv->mmio + PHYREG11);
+		} else if (priv->type == PHY_TYPE_SATA) {
+			/* downward spread spectrum +500ppm */
+			val = PHYREG32_SSC_DOWNWARD << PHYREG32_SSC_DIR_SHIFT;
+			val |= PHYREG32_SSC_OFFSET_500PPM << PHYREG32_SSC_OFFSET_SHIFT;
+			rockchip_combphy_updatel(priv, PHYREG32_SSC_MASK, val, PHYREG32);
+		}
+		break;
+
+	default:
+		dev_err(priv->dev, "unsupported rate: %lu\n", rate);
+		return -EINVAL;
+	}
+
+	if (priv->ext_refclk) {
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true);
+		if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) {
+			val = PHYREG13_RESISTER_HIGH_Z << PHYREG13_RESISTER_SHIFT;
+			val |= PHYREG13_CKRCV_AMP0;
+			rockchip_combphy_updatel(priv, PHYREG13_RESISTER_MASK, val, PHYREG13);
+
+			val = readl(priv->mmio + PHYREG14);
+			val |= PHYREG14_CKRCV_AMP1;
+			writel(val, priv->mmio + PHYREG14);
+		}
+	}
+
+	if (priv->enable_ssc) {
+		val = readl(priv->mmio + PHYREG8);
+		val |= PHYREG8_SSC_EN;
+		writel(val, priv->mmio + PHYREG8);
+	}
+
+	return 0;
+}
+
+static const struct rockchip_combphy_grfcfg rk3568_combphy_grfcfgs = {
+	/* pipe-phy-grf */
+	.pcie_mode_set		= { 0x0000, 5, 0, 0x00, 0x11 },
+	.usb_mode_set		= { 0x0000, 5, 0, 0x00, 0x04 },
+	.sgmii_mode_set		= { 0x0000, 5, 0, 0x00, 0x01 },
+	.qsgmii_mode_set	= { 0x0000, 5, 0, 0x00, 0x21 },
+	.pipe_rxterm_set	= { 0x0000, 12, 12, 0x00, 0x01 },
+	.pipe_txelec_set	= { 0x0004, 1, 1, 0x00, 0x01 },
+	.pipe_txcomp_set	= { 0x0004, 4, 4, 0x00, 0x01 },
+	.pipe_clk_25m		= { 0x0004, 14, 13, 0x00, 0x01 },
+	.pipe_clk_100m		= { 0x0004, 14, 13, 0x00, 0x02 },
+	.pipe_phymode_sel	= { 0x0008, 1, 1, 0x00, 0x01 },
+	.pipe_rate_sel		= { 0x0008, 2, 2, 0x00, 0x01 },
+	.pipe_rxterm_sel	= { 0x0008, 8, 8, 0x00, 0x01 },
+	.pipe_txelec_sel	= { 0x0008, 12, 12, 0x00, 0x01 },
+	.pipe_txcomp_sel	= { 0x0008, 15, 15, 0x00, 0x01 },
+	.pipe_clk_ext		= { 0x000c, 9, 8, 0x02, 0x01 },
+	.pipe_sel_usb		= { 0x000c, 14, 13, 0x00, 0x01 },
+	.pipe_sel_qsgmii	= { 0x000c, 15, 13, 0x00, 0x07 },
+	.pipe_phy_status	= { 0x0034, 6, 6, 0x01, 0x00 },
+	.con0_for_pcie		= { 0x0000, 15, 0, 0x00, 0x1000 },
+	.con1_for_pcie		= { 0x0004, 15, 0, 0x00, 0x0000 },
+	.con2_for_pcie		= { 0x0008, 15, 0, 0x00, 0x0101 },
+	.con3_for_pcie		= { 0x000c, 15, 0, 0x00, 0x0200 },
+	.con0_for_sata		= { 0x0000, 15, 0, 0x00, 0x0119 },
+	.con1_for_sata		= { 0x0004, 15, 0, 0x00, 0x0040 },
+	.con2_for_sata		= { 0x0008, 15, 0, 0x00, 0x80c3 },
+	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x4407 },
+	/* pipe-grf */
+	.pipe_con0_for_sata	= { 0x0000, 15, 0, 0x00, 0x2220 },
+	.pipe_xpcs_phy_ready	= { 0x0040, 2, 2, 0x00, 0x01 },
+};
+
+static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = {
+	.grfcfg		= &rk3568_combphy_grfcfgs,
+	.combphy_cfg	= rk3568_combphy_cfg,
+};
+
+static const struct of_device_id rockchip_combphy_of_match[] = {
+	{
+		.compatible = "rockchip,rk3568-naneng-combphy",
+		.data = &rk3568_combphy_cfgs,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match);
+
+static struct platform_driver rockchip_combphy_driver = {
+	.probe	= rockchip_combphy_probe,
+	.driver = {
+		.name = "rockchip-naneng-combphy",
+		.of_match_table = rockchip_combphy_of_match,
+	},
+};
+module_platform_driver(rockchip_combphy_driver);
+
+MODULE_DESCRIPTION("Rockchip NANENG COMBPHY driver");
+MODULE_LICENSE("GPL v2");