Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 485 insertions, 0 deletions

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6318.c b/drivers/pinctrl/bcm/pinctrl-bcm6318.c
new file mode 100644
index 000000000..640735463
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm6318.c
@@ -0,0 +1,485 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM6318 GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "../pinctrl-utils.h"
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM6318_NUM_GPIOS	50
+#define BCM6318_NUM_MUX		48
+
+#define BCM6318_MODE_REG	0x18
+#define BCM6318_MUX_REG		0x1c
+#define  BCM6328_MUX_MASK	GENMASK(1, 0)
+#define BCM6318_PAD_REG		0x54
+#define  BCM6328_PAD_MASK	GENMASK(3, 0)
+
+struct bcm6318_function {
+	const char *name;
+	const char * const *groups;
+	const unsigned num_groups;
+
+	unsigned mode_val:1;
+	unsigned mux_val:2;
+};
+
+static const struct pinctrl_pin_desc bcm6318_pins[] = {
+	PINCTRL_PIN(0, "gpio0"),
+	PINCTRL_PIN(1, "gpio1"),
+	PINCTRL_PIN(2, "gpio2"),
+	PINCTRL_PIN(3, "gpio3"),
+	PINCTRL_PIN(4, "gpio4"),
+	PINCTRL_PIN(5, "gpio5"),
+	PINCTRL_PIN(6, "gpio6"),
+	PINCTRL_PIN(7, "gpio7"),
+	PINCTRL_PIN(8, "gpio8"),
+	PINCTRL_PIN(9, "gpio9"),
+	PINCTRL_PIN(10, "gpio10"),
+	PINCTRL_PIN(11, "gpio11"),
+	PINCTRL_PIN(12, "gpio12"),
+	PINCTRL_PIN(13, "gpio13"),
+	PINCTRL_PIN(14, "gpio14"),
+	PINCTRL_PIN(15, "gpio15"),
+	PINCTRL_PIN(16, "gpio16"),
+	PINCTRL_PIN(17, "gpio17"),
+	PINCTRL_PIN(18, "gpio18"),
+	PINCTRL_PIN(19, "gpio19"),
+	PINCTRL_PIN(20, "gpio20"),
+	PINCTRL_PIN(21, "gpio21"),
+	PINCTRL_PIN(22, "gpio22"),
+	PINCTRL_PIN(23, "gpio23"),
+	PINCTRL_PIN(24, "gpio24"),
+	PINCTRL_PIN(25, "gpio25"),
+	PINCTRL_PIN(26, "gpio26"),
+	PINCTRL_PIN(27, "gpio27"),
+	PINCTRL_PIN(28, "gpio28"),
+	PINCTRL_PIN(29, "gpio29"),
+	PINCTRL_PIN(30, "gpio30"),
+	PINCTRL_PIN(31, "gpio31"),
+	PINCTRL_PIN(32, "gpio32"),
+	PINCTRL_PIN(33, "gpio33"),
+	PINCTRL_PIN(34, "gpio34"),
+	PINCTRL_PIN(35, "gpio35"),
+	PINCTRL_PIN(36, "gpio36"),
+	PINCTRL_PIN(37, "gpio37"),
+	PINCTRL_PIN(38, "gpio38"),
+	PINCTRL_PIN(39, "gpio39"),
+	PINCTRL_PIN(40, "gpio40"),
+	PINCTRL_PIN(41, "gpio41"),
+	PINCTRL_PIN(42, "gpio42"),
+	PINCTRL_PIN(43, "gpio43"),
+	PINCTRL_PIN(44, "gpio44"),
+	PINCTRL_PIN(45, "gpio45"),
+	PINCTRL_PIN(46, "gpio46"),
+	PINCTRL_PIN(47, "gpio47"),
+	PINCTRL_PIN(48, "gpio48"),
+	PINCTRL_PIN(49, "gpio49"),
+};
+
+static unsigned gpio0_pins[] = { 0 };
+static unsigned gpio1_pins[] = { 1 };
+static unsigned gpio2_pins[] = { 2 };
+static unsigned gpio3_pins[] = { 3 };
+static unsigned gpio4_pins[] = { 4 };
+static unsigned gpio5_pins[] = { 5 };
+static unsigned gpio6_pins[] = { 6 };
+static unsigned gpio7_pins[] = { 7 };
+static unsigned gpio8_pins[] = { 8 };
+static unsigned gpio9_pins[] = { 9 };
+static unsigned gpio10_pins[] = { 10 };
+static unsigned gpio11_pins[] = { 11 };
+static unsigned gpio12_pins[] = { 12 };
+static unsigned gpio13_pins[] = { 13 };
+static unsigned gpio14_pins[] = { 14 };
+static unsigned gpio15_pins[] = { 15 };
+static unsigned gpio16_pins[] = { 16 };
+static unsigned gpio17_pins[] = { 17 };
+static unsigned gpio18_pins[] = { 18 };
+static unsigned gpio19_pins[] = { 19 };
+static unsigned gpio20_pins[] = { 20 };
+static unsigned gpio21_pins[] = { 21 };
+static unsigned gpio22_pins[] = { 22 };
+static unsigned gpio23_pins[] = { 23 };
+static unsigned gpio24_pins[] = { 24 };
+static unsigned gpio25_pins[] = { 25 };
+static unsigned gpio26_pins[] = { 26 };
+static unsigned gpio27_pins[] = { 27 };
+static unsigned gpio28_pins[] = { 28 };
+static unsigned gpio29_pins[] = { 29 };
+static unsigned gpio30_pins[] = { 30 };
+static unsigned gpio31_pins[] = { 31 };
+static unsigned gpio32_pins[] = { 32 };
+static unsigned gpio33_pins[] = { 33 };
+static unsigned gpio34_pins[] = { 34 };
+static unsigned gpio35_pins[] = { 35 };
+static unsigned gpio36_pins[] = { 36 };
+static unsigned gpio37_pins[] = { 37 };
+static unsigned gpio38_pins[] = { 38 };
+static unsigned gpio39_pins[] = { 39 };
+static unsigned gpio40_pins[] = { 40 };
+static unsigned gpio41_pins[] = { 41 };
+static unsigned gpio42_pins[] = { 42 };
+static unsigned gpio43_pins[] = { 43 };
+static unsigned gpio44_pins[] = { 44 };
+static unsigned gpio45_pins[] = { 45 };
+static unsigned gpio46_pins[] = { 46 };
+static unsigned gpio47_pins[] = { 47 };
+static unsigned gpio48_pins[] = { 48 };
+static unsigned gpio49_pins[] = { 49 };
+
+static struct pingroup bcm6318_groups[] = {
+	BCM_PIN_GROUP(gpio0),
+	BCM_PIN_GROUP(gpio1),
+	BCM_PIN_GROUP(gpio2),
+	BCM_PIN_GROUP(gpio3),
+	BCM_PIN_GROUP(gpio4),
+	BCM_PIN_GROUP(gpio5),
+	BCM_PIN_GROUP(gpio6),
+	BCM_PIN_GROUP(gpio7),
+	BCM_PIN_GROUP(gpio8),
+	BCM_PIN_GROUP(gpio9),
+	BCM_PIN_GROUP(gpio10),
+	BCM_PIN_GROUP(gpio11),
+	BCM_PIN_GROUP(gpio12),
+	BCM_PIN_GROUP(gpio13),
+	BCM_PIN_GROUP(gpio14),
+	BCM_PIN_GROUP(gpio15),
+	BCM_PIN_GROUP(gpio16),
+	BCM_PIN_GROUP(gpio17),
+	BCM_PIN_GROUP(gpio18),
+	BCM_PIN_GROUP(gpio19),
+	BCM_PIN_GROUP(gpio20),
+	BCM_PIN_GROUP(gpio21),
+	BCM_PIN_GROUP(gpio22),
+	BCM_PIN_GROUP(gpio23),
+	BCM_PIN_GROUP(gpio24),
+	BCM_PIN_GROUP(gpio25),
+	BCM_PIN_GROUP(gpio26),
+	BCM_PIN_GROUP(gpio27),
+	BCM_PIN_GROUP(gpio28),
+	BCM_PIN_GROUP(gpio29),
+	BCM_PIN_GROUP(gpio30),
+	BCM_PIN_GROUP(gpio31),
+	BCM_PIN_GROUP(gpio32),
+	BCM_PIN_GROUP(gpio33),
+	BCM_PIN_GROUP(gpio34),
+	BCM_PIN_GROUP(gpio35),
+	BCM_PIN_GROUP(gpio36),
+	BCM_PIN_GROUP(gpio37),
+	BCM_PIN_GROUP(gpio38),
+	BCM_PIN_GROUP(gpio39),
+	BCM_PIN_GROUP(gpio40),
+	BCM_PIN_GROUP(gpio41),
+	BCM_PIN_GROUP(gpio42),
+	BCM_PIN_GROUP(gpio43),
+	BCM_PIN_GROUP(gpio44),
+	BCM_PIN_GROUP(gpio45),
+	BCM_PIN_GROUP(gpio46),
+	BCM_PIN_GROUP(gpio47),
+	BCM_PIN_GROUP(gpio48),
+	BCM_PIN_GROUP(gpio49),
+};
+
+/* GPIO_MODE */
+static const char * const led_groups[] = {
+	"gpio0",
+	"gpio1",
+	"gpio2",
+	"gpio3",
+	"gpio4",
+	"gpio5",
+	"gpio6",
+	"gpio7",
+	"gpio8",
+	"gpio9",
+	"gpio10",
+	"gpio11",
+	"gpio12",
+	"gpio13",
+	"gpio14",
+	"gpio15",
+	"gpio16",
+	"gpio17",
+	"gpio18",
+	"gpio19",
+	"gpio20",
+	"gpio21",
+	"gpio22",
+	"gpio23",
+};
+
+/* PINMUX_SEL */
+static const char * const ephy0_spd_led_groups[] = {
+	"gpio0",
+};
+
+static const char * const ephy1_spd_led_groups[] = {
+	"gpio1",
+};
+
+static const char * const ephy2_spd_led_groups[] = {
+	"gpio2",
+};
+
+static const char * const ephy3_spd_led_groups[] = {
+	"gpio3",
+};
+
+static const char * const ephy0_act_led_groups[] = {
+	"gpio4",
+};
+
+static const char * const ephy1_act_led_groups[] = {
+	"gpio5",
+};
+
+static const char * const ephy2_act_led_groups[] = {
+	"gpio6",
+};
+
+static const char * const ephy3_act_led_groups[] = {
+	"gpio7",
+};
+
+static const char * const serial_led_data_groups[] = {
+	"gpio6",
+};
+
+static const char * const serial_led_clk_groups[] = {
+	"gpio7",
+};
+
+static const char * const inet_act_led_groups[] = {
+	"gpio8",
+};
+
+static const char * const inet_fail_led_groups[] = {
+	"gpio9",
+};
+
+static const char * const dsl_led_groups[] = {
+	"gpio10",
+};
+
+static const char * const post_fail_led_groups[] = {
+	"gpio11",
+};
+
+static const char * const wlan_wps_led_groups[] = {
+	"gpio12",
+};
+
+static const char * const usb_pwron_groups[] = {
+	"gpio13",
+};
+
+static const char * const usb_device_led_groups[] = {
+	"gpio13",
+};
+
+static const char * const usb_active_groups[] = {
+	"gpio40",
+};
+
+#define BCM6318_MODE_FUN(n)				\
+	{						\
+		.name = #n,				\
+		.groups = n##_groups,			\
+		.num_groups = ARRAY_SIZE(n##_groups),	\
+		.mode_val = 1,				\
+	}
+
+#define BCM6318_MUX_FUN(n, mux)				\
+	{						\
+		.name = #n,				\
+		.groups = n##_groups,			\
+		.num_groups = ARRAY_SIZE(n##_groups),	\
+		.mux_val = mux,				\
+	}
+
+static const struct bcm6318_function bcm6318_funcs[] = {
+	BCM6318_MODE_FUN(led),
+	BCM6318_MUX_FUN(ephy0_spd_led, 1),
+	BCM6318_MUX_FUN(ephy1_spd_led, 1),
+	BCM6318_MUX_FUN(ephy2_spd_led, 1),
+	BCM6318_MUX_FUN(ephy3_spd_led, 1),
+	BCM6318_MUX_FUN(ephy0_act_led, 1),
+	BCM6318_MUX_FUN(ephy1_act_led, 1),
+	BCM6318_MUX_FUN(ephy2_act_led, 1),
+	BCM6318_MUX_FUN(ephy3_act_led, 1),
+	BCM6318_MUX_FUN(serial_led_data, 3),
+	BCM6318_MUX_FUN(serial_led_clk, 3),
+	BCM6318_MUX_FUN(inet_act_led, 1),
+	BCM6318_MUX_FUN(inet_fail_led, 1),
+	BCM6318_MUX_FUN(dsl_led, 1),
+	BCM6318_MUX_FUN(post_fail_led, 1),
+	BCM6318_MUX_FUN(wlan_wps_led, 1),
+	BCM6318_MUX_FUN(usb_pwron, 1),
+	BCM6318_MUX_FUN(usb_device_led, 2),
+	BCM6318_MUX_FUN(usb_active, 2),
+};
+
+static inline unsigned int bcm6318_mux_off(unsigned int pin)
+{
+	return BCM6318_MUX_REG + (pin / 16) * 4;
+}
+
+static inline unsigned int bcm6318_pad_off(unsigned int pin)
+{
+	return BCM6318_PAD_REG + (pin / 8) * 4;
+}
+
+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(bcm6318_groups);
+}
+
+static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+						  unsigned group)
+{
+	return bcm6318_groups[group].name;
+}
+
+static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+					  unsigned group, const unsigned **pins,
+					  unsigned *npins)
+{
+	*pins = bcm6318_groups[group].pins;
+	*npins = bcm6318_groups[group].npins;
+
+	return 0;
+}
+
+static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
+{
+	return ARRAY_SIZE(bcm6318_funcs);
+}
+
+static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
+						 unsigned selector)
+{
+	return bcm6318_funcs[selector].name;
+}
+
+static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev,
+				      unsigned selector,
+				      const char * const **groups,
+				      unsigned * const num_groups)
+{
+	*groups = bcm6318_funcs[selector].groups;
+	*num_groups = bcm6318_funcs[selector].num_groups;
+
+	return 0;
+}
+
+static inline void bcm6318_rmw_mux(struct bcm63xx_pinctrl *pc, unsigned pin,
+				   unsigned int mode, unsigned int mux)
+{
+	if (pin < BCM63XX_BANK_GPIOS)
+		regmap_update_bits(pc->regs, BCM6318_MODE_REG, BIT(pin),
+				   mode ? BIT(pin) : 0);
+
+	if (pin < BCM6318_NUM_MUX)
+		regmap_update_bits(pc->regs,
+				   bcm6318_mux_off(pin),
+				   BCM6328_MUX_MASK << ((pin % 16) * 2),
+				   mux << ((pin % 16) * 2));
+}
+
+static inline void bcm6318_set_pad(struct bcm63xx_pinctrl *pc, unsigned pin,
+				   uint8_t val)
+{
+	regmap_update_bits(pc->regs, bcm6318_pad_off(pin),
+			   BCM6328_PAD_MASK << ((pin % 8) * 4),
+			   val << ((pin % 8) * 4));
+}
+
+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev,
+				   unsigned selector, unsigned group)
+{
+	struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+	const struct pingroup *pg = &bcm6318_groups[group];
+	const struct bcm6318_function *f = &bcm6318_funcs[selector];
+
+	bcm6318_rmw_mux(pc, pg->pins[0], f->mode_val, f->mux_val);
+
+	return 0;
+}
+
+static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev,
+				       struct pinctrl_gpio_range *range,
+				       unsigned offset)
+{
+	struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
+
+	/* disable all functions using this pin */
+	if (offset < 13) {
+		/* GPIOs 0-12 use mux 0 as GPIO function */
+		bcm6318_rmw_mux(pc, offset, 0, 0);
+	} else if (offset < 42) {
+		/* GPIOs 13-41 use mux 3 as GPIO function */
+		bcm6318_rmw_mux(pc, offset, 0, 3);
+
+		bcm6318_set_pad(pc, offset, 0);
+	}
+
+	return 0;
+}
+
+static const struct pinctrl_ops bcm6318_pctl_ops = {
+	.dt_free_map = pinctrl_utils_free_map,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.get_group_name = bcm6318_pinctrl_get_group_name,
+	.get_group_pins = bcm6318_pinctrl_get_group_pins,
+	.get_groups_count = bcm6318_pinctrl_get_group_count,
+};
+
+static const struct pinmux_ops bcm6318_pmx_ops = {
+	.get_function_groups = bcm6318_pinctrl_get_groups,
+	.get_function_name = bcm6318_pinctrl_get_func_name,
+	.get_functions_count = bcm6318_pinctrl_get_func_count,
+	.gpio_request_enable = bcm6318_gpio_request_enable,
+	.set_mux = bcm6318_pinctrl_set_mux,
+	.strict = true,
+};
+
+static const struct bcm63xx_pinctrl_soc bcm6318_soc = {
+	.ngpios = BCM6318_NUM_GPIOS,
+	.npins = ARRAY_SIZE(bcm6318_pins),
+	.pctl_ops = &bcm6318_pctl_ops,
+	.pins = bcm6318_pins,
+	.pmx_ops = &bcm6318_pmx_ops,
+};
+
+static int bcm6318_pinctrl_probe(struct platform_device *pdev)
+{
+	return bcm63xx_pinctrl_probe(pdev, &bcm6318_soc, NULL);
+}
+
+static const struct of_device_id bcm6318_pinctrl_match[] = {
+	{ .compatible = "brcm,bcm6318-pinctrl", },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver bcm6318_pinctrl_driver = {
+	.probe = bcm6318_pinctrl_probe,
+	.driver = {
+		.name = "bcm6318-pinctrl",
+		.of_match_table = bcm6318_pinctrl_match,
+	},
+};
+
+builtin_platform_driver(bcm6318_pinctrl_driver);