Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 712 insertions, 0 deletions

diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
new file mode 100644
index 000000000..3c792bf03
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c
@@ -0,0 +1,712 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014-2017 Broadcom
+
+/*
+ * This file contains the Broadcom Northstar Plus (NSP) GPIO driver that
+ * supports the chipCommonA GPIO controller. Basic PINCONF such as bias,
+ * pull up/down, slew and drive strength are also supported in this driver.
+ *
+ * Pins from the chipCommonA  GPIO can be individually muxed to GPIO function,
+ * through the interaction with the NSP IOMUX controller.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/slab.h>
+
+#include "../pinctrl-utils.h"
+
+#define NSP_CHIP_A_INT_STATUS		0x00
+#define NSP_CHIP_A_INT_MASK		0x04
+#define NSP_GPIO_DATA_IN		0x40
+#define NSP_GPIO_DATA_OUT		0x44
+#define NSP_GPIO_OUT_EN			0x48
+#define NSP_GPIO_INT_POLARITY		0x50
+#define NSP_GPIO_INT_MASK		0x54
+#define NSP_GPIO_EVENT			0x58
+#define NSP_GPIO_EVENT_INT_MASK		0x5c
+#define NSP_GPIO_EVENT_INT_POLARITY	0x64
+#define NSP_CHIP_A_GPIO_INT_BIT		0x01
+
+/* I/O parameters offset for chipcommon A GPIO */
+#define NSP_GPIO_DRV_CTRL		0x00
+#define NSP_GPIO_HYSTERESIS_EN		0x10
+#define NSP_GPIO_SLEW_RATE_EN		0x14
+#define NSP_PULL_UP_EN			0x18
+#define NSP_PULL_DOWN_EN		0x1c
+#define GPIO_DRV_STRENGTH_BITS		0x03
+
+/*
+ * nsp GPIO core
+ *
+ * @dev: pointer to device
+ * @base: I/O register base for nsp GPIO controller
+ * @io_ctrl: I/O register base for PINCONF support outside the GPIO block
+ * @gc: GPIO chip
+ * @pctl: pointer to pinctrl_dev
+ * @pctldesc: pinctrl descriptor
+ * @lock: lock to protect access to I/O registers
+ */
+struct nsp_gpio {
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *io_ctrl;
+	struct irq_chip irqchip;
+	struct gpio_chip gc;
+	struct pinctrl_dev *pctl;
+	struct pinctrl_desc pctldesc;
+	raw_spinlock_t lock;
+};
+
+enum base_type {
+	REG,
+	IO_CTRL
+};
+
+/*
+ * Mapping from PINCONF pins to GPIO pins is 1-to-1
+ */
+static inline unsigned nsp_pin_to_gpio(unsigned pin)
+{
+	return pin;
+}
+
+/*
+ *  nsp_set_bit - set or clear one bit (corresponding to the GPIO pin) in a
+ *  nsp GPIO register
+ *
+ *  @nsp_gpio: nsp GPIO device
+ *  @base_type: reg base to modify
+ *  @reg: register offset
+ *  @gpio: GPIO pin
+ *  @set: set or clear
+ */
+static inline void nsp_set_bit(struct nsp_gpio *chip, enum base_type address,
+			       unsigned int reg, unsigned gpio, bool set)
+{
+	u32 val;
+	void __iomem *base_address;
+
+	if (address == IO_CTRL)
+		base_address = chip->io_ctrl;
+	else
+		base_address = chip->base;
+
+	val = readl(base_address + reg);
+	if (set)
+		val |= BIT(gpio);
+	else
+		val &= ~BIT(gpio);
+
+	writel(val, base_address + reg);
+}
+
+/*
+ *  nsp_get_bit - get one bit (corresponding to the GPIO pin) in a
+ *  nsp GPIO register
+ */
+static inline bool nsp_get_bit(struct nsp_gpio *chip, enum base_type address,
+			       unsigned int reg, unsigned gpio)
+{
+	if (address == IO_CTRL)
+		return !!(readl(chip->io_ctrl + reg) & BIT(gpio));
+	else
+		return !!(readl(chip->base + reg) & BIT(gpio));
+}
+
+static irqreturn_t nsp_gpio_irq_handler(int irq, void *data)
+{
+	struct gpio_chip *gc = (struct gpio_chip *)data;
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	int bit;
+	unsigned long int_bits = 0;
+	u32 int_status;
+
+	/* go through the entire GPIOs and handle all interrupts */
+	int_status = readl(chip->base + NSP_CHIP_A_INT_STATUS);
+	if (int_status & NSP_CHIP_A_GPIO_INT_BIT) {
+		unsigned int event, level;
+
+		/* Get level and edge interrupts */
+		event = readl(chip->base + NSP_GPIO_EVENT_INT_MASK) &
+			      readl(chip->base + NSP_GPIO_EVENT);
+		level = readl(chip->base + NSP_GPIO_DATA_IN) ^
+			      readl(chip->base + NSP_GPIO_INT_POLARITY);
+		level &= readl(chip->base + NSP_GPIO_INT_MASK);
+		int_bits = level | event;
+
+		for_each_set_bit(bit, &int_bits, gc->ngpio)
+			generic_handle_domain_irq(gc->irq.domain, bit);
+	}
+
+	return  int_bits ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static void nsp_gpio_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = d->hwirq;
+	u32 val = BIT(gpio);
+	u32 trigger_type;
+
+	trigger_type = irq_get_trigger_type(d->irq);
+	if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		writel(val, chip->base + NSP_GPIO_EVENT);
+}
+
+/*
+ *  nsp_gpio_irq_set_mask - mask/unmask a GPIO interrupt
+ *
+ *  @d: IRQ chip data
+ *  @unmask: mask/unmask GPIO interrupt
+ */
+static void nsp_gpio_irq_set_mask(struct irq_data *d, bool unmask)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = d->hwirq;
+	u32 trigger_type;
+
+	trigger_type = irq_get_trigger_type(d->irq);
+	if (trigger_type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_MASK, gpio, unmask);
+	else
+		nsp_set_bit(chip, REG, NSP_GPIO_INT_MASK, gpio, unmask);
+}
+
+static void nsp_gpio_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_gpio_irq_set_mask(d, false);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static void nsp_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_gpio_irq_set_mask(d, true);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int nsp_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned gpio = d->hwirq;
+	bool level_low;
+	bool falling;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	falling = nsp_get_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio);
+	level_low = nsp_get_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio);
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		falling = false;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		falling = true;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		level_low = false;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		level_low = true;
+		break;
+
+	default:
+		dev_err(chip->dev, "invalid GPIO IRQ type 0x%x\n",
+			type);
+		raw_spin_unlock_irqrestore(&chip->lock, flags);
+		return -EINVAL;
+	}
+
+	nsp_set_bit(chip, REG, NSP_GPIO_EVENT_INT_POLARITY, gpio, falling);
+	nsp_set_bit(chip, REG, NSP_GPIO_INT_POLARITY, gpio, level_low);
+
+	if (type & IRQ_TYPE_EDGE_BOTH)
+		irq_set_handler_locked(d, handle_edge_irq);
+	else
+		irq_set_handler_locked(d, handle_level_irq);
+
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u level_low:%s falling:%s\n", gpio,
+		level_low ? "true" : "false", falling ? "true" : "false");
+	return 0;
+}
+
+static int nsp_gpio_direction_input(struct gpio_chip *gc, unsigned gpio)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, REG, NSP_GPIO_OUT_EN, gpio, false);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set input\n", gpio);
+	return 0;
+}
+
+static int nsp_gpio_direction_output(struct gpio_chip *gc, unsigned gpio,
+				     int val)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, REG, NSP_GPIO_OUT_EN, gpio, true);
+	nsp_set_bit(chip, REG, NSP_GPIO_DATA_OUT, gpio, !!(val));
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set output, value:%d\n", gpio, val);
+	return 0;
+}
+
+static int nsp_gpio_get_direction(struct gpio_chip *gc, unsigned gpio)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+	int val;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	val = nsp_get_bit(chip, REG, NSP_GPIO_OUT_EN, gpio);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return !val;
+}
+
+static void nsp_gpio_set(struct gpio_chip *gc, unsigned gpio, int val)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, REG, NSP_GPIO_DATA_OUT, gpio, !!(val));
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set, value:%d\n", gpio, val);
+}
+
+static int nsp_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+	struct nsp_gpio *chip = gpiochip_get_data(gc);
+
+	return !!(readl(chip->base + NSP_GPIO_DATA_IN) & BIT(gpio));
+}
+
+static int nsp_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return 1;
+}
+
+/*
+ * Only one group: "gpio_grp", since this local pinctrl device only performs
+ * GPIO specific PINCONF configurations
+ */
+static const char *nsp_get_group_name(struct pinctrl_dev *pctldev,
+				      unsigned selector)
+{
+	return "gpio_grp";
+}
+
+static const struct pinctrl_ops nsp_pctrl_ops = {
+	.get_groups_count = nsp_get_groups_count,
+	.get_group_name = nsp_get_group_name,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+static int nsp_gpio_set_slew(struct nsp_gpio *chip, unsigned gpio, u32 slew)
+{
+	if (slew)
+		nsp_set_bit(chip, IO_CTRL, NSP_GPIO_SLEW_RATE_EN, gpio, true);
+	else
+		nsp_set_bit(chip, IO_CTRL, NSP_GPIO_SLEW_RATE_EN, gpio, false);
+
+	return 0;
+}
+
+static int nsp_gpio_set_pull(struct nsp_gpio *chip, unsigned gpio,
+			     bool pull_up, bool pull_down)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	nsp_set_bit(chip, IO_CTRL, NSP_PULL_DOWN_EN, gpio, pull_down);
+	nsp_set_bit(chip, IO_CTRL, NSP_PULL_UP_EN, gpio, pull_up);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	dev_dbg(chip->dev, "gpio:%u set pullup:%d pulldown: %d\n",
+		gpio, pull_up, pull_down);
+	return 0;
+}
+
+static void nsp_gpio_get_pull(struct nsp_gpio *chip, unsigned gpio,
+			      bool *pull_up, bool *pull_down)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	*pull_up = nsp_get_bit(chip, IO_CTRL, NSP_PULL_UP_EN, gpio);
+	*pull_down = nsp_get_bit(chip, IO_CTRL, NSP_PULL_DOWN_EN, gpio);
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int nsp_gpio_set_strength(struct nsp_gpio *chip, unsigned gpio,
+				 u32 strength)
+{
+	u32 offset, shift, i;
+	u32 val;
+	unsigned long flags;
+
+	/* make sure drive strength is supported */
+	if (strength < 2 || strength > 16 || (strength % 2))
+		return -ENOTSUPP;
+
+	shift = gpio;
+	offset = NSP_GPIO_DRV_CTRL;
+	dev_dbg(chip->dev, "gpio:%u set drive strength:%d mA\n", gpio,
+		strength);
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	strength = (strength / 2) - 1;
+	for (i = GPIO_DRV_STRENGTH_BITS; i > 0; i--) {
+		val = readl(chip->io_ctrl + offset);
+		val &= ~BIT(shift);
+		val |= ((strength >> (i-1)) & 0x1) << shift;
+		writel(val, chip->io_ctrl + offset);
+		offset += 4;
+	}
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int nsp_gpio_get_strength(struct nsp_gpio *chip, unsigned gpio,
+				 u16 *strength)
+{
+	unsigned int offset, shift;
+	u32 val;
+	unsigned long flags;
+	int i;
+
+	offset = NSP_GPIO_DRV_CTRL;
+	shift = gpio;
+
+	raw_spin_lock_irqsave(&chip->lock, flags);
+	*strength = 0;
+	for (i = (GPIO_DRV_STRENGTH_BITS - 1); i >= 0; i--) {
+		val = readl(chip->io_ctrl + offset) & BIT(shift);
+		val >>= shift;
+		*strength += (val << i);
+		offset += 4;
+	}
+
+	/* convert to mA */
+	*strength = (*strength + 1) * 2;
+	raw_spin_unlock_irqrestore(&chip->lock, flags);
+
+	return 0;
+}
+
+static int nsp_pin_config_group_get(struct pinctrl_dev *pctldev,
+				    unsigned selector,
+			     unsigned long *config)
+{
+	return 0;
+}
+
+static int nsp_pin_config_group_set(struct pinctrl_dev *pctldev,
+				    unsigned selector,
+			     unsigned long *configs, unsigned num_configs)
+{
+	return 0;
+}
+
+static int nsp_pin_config_get(struct pinctrl_dev *pctldev, unsigned pin,
+			      unsigned long *config)
+{
+	struct nsp_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param = pinconf_to_config_param(*config);
+	unsigned int gpio;
+	u16 arg = 0;
+	bool pull_up, pull_down;
+	int ret;
+
+	gpio = nsp_pin_to_gpio(pin);
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
+		if ((pull_up == false) && (pull_down == false))
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_UP:
+		nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
+		if (pull_up)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		nsp_gpio_get_pull(chip, gpio, &pull_up, &pull_down);
+		if (pull_down)
+			return 0;
+		else
+			return -EINVAL;
+
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		ret = nsp_gpio_get_strength(chip, gpio, &arg);
+		if (ret)
+			return ret;
+		*config = pinconf_to_config_packed(param, arg);
+		return 0;
+
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int nsp_pin_config_set(struct pinctrl_dev *pctldev, unsigned pin,
+			      unsigned long *configs, unsigned num_configs)
+{
+	struct nsp_gpio *chip = pinctrl_dev_get_drvdata(pctldev);
+	enum pin_config_param param;
+	u32 arg;
+	unsigned int i, gpio;
+	int ret = -ENOTSUPP;
+
+	gpio = nsp_pin_to_gpio(pin);
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_DISABLE:
+			ret = nsp_gpio_set_pull(chip, gpio, false, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			ret = nsp_gpio_set_pull(chip, gpio, true, false);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			ret = nsp_gpio_set_pull(chip, gpio, false, true);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			ret = nsp_gpio_set_strength(chip, gpio, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			ret = nsp_gpio_set_slew(chip, gpio, arg);
+			if (ret < 0)
+				goto out;
+			break;
+
+		default:
+			dev_err(chip->dev, "invalid configuration\n");
+			return -ENOTSUPP;
+		}
+	}
+
+out:
+	return ret;
+}
+
+static const struct pinconf_ops nsp_pconf_ops = {
+	.is_generic = true,
+	.pin_config_get = nsp_pin_config_get,
+	.pin_config_set = nsp_pin_config_set,
+	.pin_config_group_get = nsp_pin_config_group_get,
+	.pin_config_group_set = nsp_pin_config_group_set,
+};
+
+/*
+ * NSP GPIO controller supports some PINCONF related configurations such as
+ * pull up, pull down, slew and drive strength, when the pin is configured
+ * to GPIO.
+ *
+ * Here a local pinctrl device is created with simple 1-to-1 pin mapping to the
+ * local GPIO pins
+ */
+static int nsp_gpio_register_pinconf(struct nsp_gpio *chip)
+{
+	struct pinctrl_desc *pctldesc = &chip->pctldesc;
+	struct pinctrl_pin_desc *pins;
+	struct gpio_chip *gc = &chip->gc;
+	int i;
+
+	pins = devm_kcalloc(chip->dev, gc->ngpio, sizeof(*pins), GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+	for (i = 0; i < gc->ngpio; i++) {
+		pins[i].number = i;
+		pins[i].name = devm_kasprintf(chip->dev, GFP_KERNEL,
+					      "gpio-%d", i);
+		if (!pins[i].name)
+			return -ENOMEM;
+	}
+	pctldesc->name = dev_name(chip->dev);
+	pctldesc->pctlops = &nsp_pctrl_ops;
+	pctldesc->pins = pins;
+	pctldesc->npins = gc->ngpio;
+	pctldesc->confops = &nsp_pconf_ops;
+
+	chip->pctl = devm_pinctrl_register(chip->dev, pctldesc, chip);
+	if (IS_ERR(chip->pctl)) {
+		dev_err(chip->dev, "unable to register pinctrl device\n");
+		return PTR_ERR(chip->pctl);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id nsp_gpio_of_match[] = {
+	{.compatible = "brcm,nsp-gpio-a",},
+	{}
+};
+
+static int nsp_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct nsp_gpio *chip;
+	struct gpio_chip *gc;
+	u32 val;
+	int irq, ret;
+
+	if (of_property_read_u32(pdev->dev.of_node, "ngpios", &val)) {
+		dev_err(&pdev->dev, "Missing ngpios OF property\n");
+		return -ENODEV;
+	}
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = dev;
+	platform_set_drvdata(pdev, chip);
+
+	chip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(chip->base)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(chip->base);
+	}
+
+	chip->io_ctrl = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(chip->io_ctrl)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(chip->io_ctrl);
+	}
+
+	raw_spin_lock_init(&chip->lock);
+	gc = &chip->gc;
+	gc->base = -1;
+	gc->can_sleep = false;
+	gc->ngpio = val;
+	gc->label = dev_name(dev);
+	gc->parent = dev;
+	gc->request = gpiochip_generic_request;
+	gc->free = gpiochip_generic_free;
+	gc->direction_input = nsp_gpio_direction_input;
+	gc->direction_output = nsp_gpio_direction_output;
+	gc->get_direction = nsp_gpio_get_direction;
+	gc->set = nsp_gpio_set;
+	gc->get = nsp_gpio_get;
+
+	/* optional GPIO interrupt support */
+	irq = platform_get_irq(pdev, 0);
+	if (irq > 0) {
+		struct gpio_irq_chip *girq;
+		struct irq_chip *irqc;
+
+		irqc = &chip->irqchip;
+		irqc->name = "gpio-a";
+		irqc->irq_ack = nsp_gpio_irq_ack;
+		irqc->irq_mask = nsp_gpio_irq_mask;
+		irqc->irq_unmask = nsp_gpio_irq_unmask;
+		irqc->irq_set_type = nsp_gpio_irq_set_type;
+
+		val = readl(chip->base + NSP_CHIP_A_INT_MASK);
+		val = val | NSP_CHIP_A_GPIO_INT_BIT;
+		writel(val, (chip->base + NSP_CHIP_A_INT_MASK));
+
+		/* Install ISR for this GPIO controller. */
+		ret = devm_request_irq(dev, irq, nsp_gpio_irq_handler,
+				       IRQF_SHARED, "gpio-a", &chip->gc);
+		if (ret) {
+			dev_err(&pdev->dev, "Unable to request IRQ%d: %d\n",
+				irq, ret);
+			return ret;
+		}
+
+		girq = &chip->gc.irq;
+		girq->chip = irqc;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_bad_irq;
+	}
+
+	ret = devm_gpiochip_add_data(dev, gc, chip);
+	if (ret < 0) {
+		dev_err(dev, "unable to add GPIO chip\n");
+		return ret;
+	}
+
+	ret = nsp_gpio_register_pinconf(chip);
+	if (ret) {
+		dev_err(dev, "unable to register pinconf\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver nsp_gpio_driver = {
+	.driver = {
+		.name = "nsp-gpio-a",
+		.of_match_table = nsp_gpio_of_match,
+	},
+	.probe = nsp_gpio_probe,
+};
+
+static int __init nsp_gpio_init(void)
+{
+	return platform_driver_register(&nsp_gpio_driver);
+}
+arch_initcall_sync(nsp_gpio_init);