Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 384 insertions, 0 deletions

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-mt6397.h b/drivers/pinctrl/mediatek/pinctrl-mtk-mt6397.h
new file mode 100644
index 000000000..0622293ab
--- /dev/null
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-mt6397.h
@@ -0,0 +1,384 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PINCTRL_MTK_MT6397_H
+#define __PINCTRL_MTK_MT6397_H
+
+#include <linux/pinctrl/pinctrl.h>
+#include "pinctrl-mtk-common.h"
+
+static const struct mtk_desc_pin mtk_pins_mt6397[] = {
+	MTK_PIN(PINCTRL_PIN(0, "INT"),
+		"N2", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO0"),
+		MTK_FUNCTION(1, "INT")
+	),
+	MTK_PIN(PINCTRL_PIN(1, "SRCVOLTEN"),
+		"M4", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO1"),
+		MTK_FUNCTION(1, "SRCVOLTEN"),
+		MTK_FUNCTION(6, "TEST_CK1")
+	),
+	MTK_PIN(PINCTRL_PIN(2, "SRCLKEN_PERI"),
+		"M2", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO2"),
+		MTK_FUNCTION(1, "SRCLKEN_PERI"),
+		MTK_FUNCTION(6, "TEST_CK2")
+	),
+	MTK_PIN(PINCTRL_PIN(3, "RTC_32K1V8"),
+		"K3", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO3"),
+		MTK_FUNCTION(1, "RTC_32K1V8"),
+		MTK_FUNCTION(6, "TEST_CK3")
+	),
+	MTK_PIN(PINCTRL_PIN(4, "WRAP_EVENT"),
+		"J2", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO4"),
+		MTK_FUNCTION(1, "WRAP_EVENT")
+	),
+	MTK_PIN(PINCTRL_PIN(5, "SPI_CLK"),
+		"L4", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO5"),
+		MTK_FUNCTION(1, "SPI_CLK")
+	),
+	MTK_PIN(PINCTRL_PIN(6, "SPI_CSN"),
+		"J3", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO6"),
+		MTK_FUNCTION(1, "SPI_CSN")
+	),
+	MTK_PIN(PINCTRL_PIN(7, "SPI_MOSI"),
+		"J1", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO7"),
+		MTK_FUNCTION(1, "SPI_MOSI")
+	),
+	MTK_PIN(PINCTRL_PIN(8, "SPI_MISO"),
+		"L3", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO8"),
+		MTK_FUNCTION(1, "SPI_MISO")
+	),
+	MTK_PIN(PINCTRL_PIN(9, "AUD_CLK_MOSI"),
+		"H2", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO9"),
+		MTK_FUNCTION(1, "AUD_CLK"),
+		MTK_FUNCTION(6, "TEST_IN0"),
+		MTK_FUNCTION(7, "TEST_OUT0")
+	),
+	MTK_PIN(PINCTRL_PIN(10, "AUD_DAT_MISO"),
+		"H3", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO10"),
+		MTK_FUNCTION(1, "AUD_MISO"),
+		MTK_FUNCTION(6, "TEST_IN1"),
+		MTK_FUNCTION(7, "TEST_OUT1")
+	),
+	MTK_PIN(PINCTRL_PIN(11, "AUD_DAT_MOSI"),
+		"H1", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO11"),
+		MTK_FUNCTION(1, "AUD_MOSI"),
+		MTK_FUNCTION(6, "TEST_IN2"),
+		MTK_FUNCTION(7, "TEST_OUT2")
+	),
+	MTK_PIN(PINCTRL_PIN(12, "COL0"),
+		"F3", "mt6397",
+		MTK_EINT_FUNCTION(2, 10),
+		MTK_FUNCTION(0, "GPIO12"),
+		MTK_FUNCTION(1, "COL0_USBDL"),
+		MTK_FUNCTION(2, "EINT10_1X"),
+		MTK_FUNCTION(3, "PWM1_3X"),
+		MTK_FUNCTION(6, "TEST_IN3"),
+		MTK_FUNCTION(7, "TEST_OUT3")
+	),
+	MTK_PIN(PINCTRL_PIN(13, "COL1"),
+		"G8", "mt6397",
+		MTK_EINT_FUNCTION(2, 11),
+		MTK_FUNCTION(0, "GPIO13"),
+		MTK_FUNCTION(1, "COL1"),
+		MTK_FUNCTION(2, "EINT11_1X"),
+		MTK_FUNCTION(3, "SCL0_2X"),
+		MTK_FUNCTION(6, "TEST_IN4"),
+		MTK_FUNCTION(7, "TEST_OUT4")
+	),
+	MTK_PIN(PINCTRL_PIN(14, "COL2"),
+		"H4", "mt6397",
+		MTK_EINT_FUNCTION(2, 12),
+		MTK_FUNCTION(0, "GPIO14"),
+		MTK_FUNCTION(1, "COL2"),
+		MTK_FUNCTION(2, "EINT12_1X"),
+		MTK_FUNCTION(3, "SDA0_2X"),
+		MTK_FUNCTION(6, "TEST_IN5"),
+		MTK_FUNCTION(7, "TEST_OUT5")
+	),
+	MTK_PIN(PINCTRL_PIN(15, "COL3"),
+		"G2", "mt6397",
+		MTK_EINT_FUNCTION(2, 13),
+		MTK_FUNCTION(0, "GPIO15"),
+		MTK_FUNCTION(1, "COL3"),
+		MTK_FUNCTION(2, "EINT13_1X"),
+		MTK_FUNCTION(3, "SCL1_2X"),
+		MTK_FUNCTION(6, "TEST_IN6"),
+		MTK_FUNCTION(7, "TEST_OUT6")
+	),
+	MTK_PIN(PINCTRL_PIN(16, "COL4"),
+		"F2", "mt6397",
+		MTK_EINT_FUNCTION(2, 14),
+		MTK_FUNCTION(0, "GPIO16"),
+		MTK_FUNCTION(1, "COL4"),
+		MTK_FUNCTION(2, "EINT14_1X"),
+		MTK_FUNCTION(3, "SDA1_2X"),
+		MTK_FUNCTION(6, "TEST_IN7"),
+		MTK_FUNCTION(7, "TEST_OUT7")
+	),
+	MTK_PIN(PINCTRL_PIN(17, "COL5"),
+		"G7", "mt6397",
+		MTK_EINT_FUNCTION(2, 15),
+		MTK_FUNCTION(0, "GPIO17"),
+		MTK_FUNCTION(1, "COL5"),
+		MTK_FUNCTION(2, "EINT15_1X"),
+		MTK_FUNCTION(3, "SCL2_2X"),
+		MTK_FUNCTION(6, "TEST_IN8"),
+		MTK_FUNCTION(7, "TEST_OUT8")
+	),
+	MTK_PIN(PINCTRL_PIN(18, "COL6"),
+		"J6", "mt6397",
+		MTK_EINT_FUNCTION(2, 16),
+		MTK_FUNCTION(0, "GPIO18"),
+		MTK_FUNCTION(1, "COL6"),
+		MTK_FUNCTION(2, "EINT16_1X"),
+		MTK_FUNCTION(3, "SDA2_2X"),
+		MTK_FUNCTION(4, "GPIO32K_0"),
+		MTK_FUNCTION(5, "GPIO26M_0"),
+		MTK_FUNCTION(6, "TEST_IN9"),
+		MTK_FUNCTION(7, "TEST_OUT9")
+	),
+	MTK_PIN(PINCTRL_PIN(19, "COL7"),
+		"J5", "mt6397",
+		MTK_EINT_FUNCTION(2, 17),
+		MTK_FUNCTION(0, "GPIO19"),
+		MTK_FUNCTION(1, "COL7"),
+		MTK_FUNCTION(2, "EINT17_1X"),
+		MTK_FUNCTION(3, "PWM2_3X"),
+		MTK_FUNCTION(4, "GPIO32K_1"),
+		MTK_FUNCTION(5, "GPIO26M_1"),
+		MTK_FUNCTION(6, "TEST_IN10"),
+		MTK_FUNCTION(7, "TEST_OUT10")
+	),
+	MTK_PIN(PINCTRL_PIN(20, "ROW0"),
+		"L7", "mt6397",
+		MTK_EINT_FUNCTION(2, 18),
+		MTK_FUNCTION(0, "GPIO20"),
+		MTK_FUNCTION(1, "ROW0"),
+		MTK_FUNCTION(2, "EINT18_1X"),
+		MTK_FUNCTION(3, "SCL0_3X"),
+		MTK_FUNCTION(6, "TEST_IN11"),
+		MTK_FUNCTION(7, "TEST_OUT11")
+	),
+	MTK_PIN(PINCTRL_PIN(21, "ROW1"),
+		"P1", "mt6397",
+		MTK_EINT_FUNCTION(2, 19),
+		MTK_FUNCTION(0, "GPIO21"),
+		MTK_FUNCTION(1, "ROW1"),
+		MTK_FUNCTION(2, "EINT19_1X"),
+		MTK_FUNCTION(3, "SDA0_3X"),
+		MTK_FUNCTION(4, "AUD_TSTCK"),
+		MTK_FUNCTION(6, "TEST_IN12"),
+		MTK_FUNCTION(7, "TEST_OUT12")
+	),
+	MTK_PIN(PINCTRL_PIN(22, "ROW2"),
+		"J8", "mt6397",
+		MTK_EINT_FUNCTION(2, 20),
+		MTK_FUNCTION(0, "GPIO22"),
+		MTK_FUNCTION(1, "ROW2"),
+		MTK_FUNCTION(2, "EINT20_1X"),
+		MTK_FUNCTION(3, "SCL1_3X"),
+		MTK_FUNCTION(6, "TEST_IN13"),
+		MTK_FUNCTION(7, "TEST_OUT13")
+	),
+	MTK_PIN(PINCTRL_PIN(23, "ROW3"),
+		"J7", "mt6397",
+		MTK_EINT_FUNCTION(2, 21),
+		MTK_FUNCTION(0, "GPIO23"),
+		MTK_FUNCTION(1, "ROW3"),
+		MTK_FUNCTION(2, "EINT21_1X"),
+		MTK_FUNCTION(3, "SDA1_3X"),
+		MTK_FUNCTION(6, "TEST_IN14"),
+		MTK_FUNCTION(7, "TEST_OUT14")
+	),
+	MTK_PIN(PINCTRL_PIN(24, "ROW4"),
+		"L5", "mt6397",
+		MTK_EINT_FUNCTION(2, 22),
+		MTK_FUNCTION(0, "GPIO24"),
+		MTK_FUNCTION(1, "ROW4"),
+		MTK_FUNCTION(2, "EINT22_1X"),
+		MTK_FUNCTION(3, "SCL2_3X"),
+		MTK_FUNCTION(6, "TEST_IN15"),
+		MTK_FUNCTION(7, "TEST_OUT15")
+	),
+	MTK_PIN(PINCTRL_PIN(25, "ROW5"),
+		"N6", "mt6397",
+		MTK_EINT_FUNCTION(2, 23),
+		MTK_FUNCTION(0, "GPIO25"),
+		MTK_FUNCTION(1, "ROW5"),
+		MTK_FUNCTION(2, "EINT23_1X"),
+		MTK_FUNCTION(3, "SDA2_3X"),
+		MTK_FUNCTION(6, "TEST_IN16"),
+		MTK_FUNCTION(7, "TEST_OUT16")
+	),
+	MTK_PIN(PINCTRL_PIN(26, "ROW6"),
+		"L6", "mt6397",
+		MTK_EINT_FUNCTION(2, 24),
+		MTK_FUNCTION(0, "GPIO26"),
+		MTK_FUNCTION(1, "ROW6"),
+		MTK_FUNCTION(2, "EINT24_1X"),
+		MTK_FUNCTION(3, "PWM3_3X"),
+		MTK_FUNCTION(4, "GPIO32K_2"),
+		MTK_FUNCTION(5, "GPIO26M_2"),
+		MTK_FUNCTION(6, "TEST_IN17"),
+		MTK_FUNCTION(7, "TEST_OUT17")
+	),
+	MTK_PIN(PINCTRL_PIN(27, "ROW7"),
+		"P2", "mt6397",
+		MTK_EINT_FUNCTION(2, 3),
+		MTK_FUNCTION(0, "GPIO27"),
+		MTK_FUNCTION(1, "ROW7"),
+		MTK_FUNCTION(2, "EINT3_1X"),
+		MTK_FUNCTION(3, "CBUS"),
+		MTK_FUNCTION(4, "GPIO32K_3"),
+		MTK_FUNCTION(5, "GPIO26M_3"),
+		MTK_FUNCTION(6, "TEST_IN18"),
+		MTK_FUNCTION(7, "TEST_OUT18")
+	),
+	MTK_PIN(PINCTRL_PIN(28, "PWM1(VMSEL1)"),
+		"J4", "mt6397",
+		MTK_EINT_FUNCTION(2, 4),
+		MTK_FUNCTION(0, "GPIO28"),
+		MTK_FUNCTION(1, "PWM1"),
+		MTK_FUNCTION(2, "EINT4_1X"),
+		MTK_FUNCTION(4, "GPIO32K_4"),
+		MTK_FUNCTION(5, "GPIO26M_4"),
+		MTK_FUNCTION(6, "TEST_IN19"),
+		MTK_FUNCTION(7, "TEST_OUT19")
+	),
+	MTK_PIN(PINCTRL_PIN(29, "PWM2(VMSEL2)"),
+		"N5", "mt6397",
+		MTK_EINT_FUNCTION(2, 5),
+		MTK_FUNCTION(0, "GPIO29"),
+		MTK_FUNCTION(1, "PWM2"),
+		MTK_FUNCTION(2, "EINT5_1X"),
+		MTK_FUNCTION(4, "GPIO32K_5"),
+		MTK_FUNCTION(5, "GPIO26M_5"),
+		MTK_FUNCTION(6, "TEST_IN20"),
+		MTK_FUNCTION(7, "TEST_OUT20")
+	),
+	MTK_PIN(PINCTRL_PIN(30, "PWM3(PWM)"),
+		"R3", "mt6397",
+		MTK_EINT_FUNCTION(2, 6),
+		MTK_FUNCTION(0, "GPIO30"),
+		MTK_FUNCTION(1, "PWM3"),
+		MTK_FUNCTION(2, "EINT6_1X"),
+		MTK_FUNCTION(3, "COL0"),
+		MTK_FUNCTION(4, "GPIO32K_6"),
+		MTK_FUNCTION(5, "GPIO26M_6"),
+		MTK_FUNCTION(6, "TEST_IN21"),
+		MTK_FUNCTION(7, "TEST_OUT21")
+	),
+	MTK_PIN(PINCTRL_PIN(31, "SCL0"),
+		"N1", "mt6397",
+		MTK_EINT_FUNCTION(2, 7),
+		MTK_FUNCTION(0, "GPIO31"),
+		MTK_FUNCTION(1, "SCL0"),
+		MTK_FUNCTION(2, "EINT7_1X"),
+		MTK_FUNCTION(3, "PWM1_2X"),
+		MTK_FUNCTION(6, "TEST_IN22"),
+		MTK_FUNCTION(7, "TEST_OUT22")
+	),
+	MTK_PIN(PINCTRL_PIN(32, "SDA0"),
+		"N3", "mt6397",
+		MTK_EINT_FUNCTION(2, 8),
+		MTK_FUNCTION(0, "GPIO32"),
+		MTK_FUNCTION(1, "SDA0"),
+		MTK_FUNCTION(2, "EINT8_1X"),
+		MTK_FUNCTION(6, "TEST_IN23"),
+		MTK_FUNCTION(7, "TEST_OUT23")
+	),
+	MTK_PIN(PINCTRL_PIN(33, "SCL1"),
+		"T1", "mt6397",
+		MTK_EINT_FUNCTION(2, 9),
+		MTK_FUNCTION(0, "GPIO33"),
+		MTK_FUNCTION(1, "SCL1"),
+		MTK_FUNCTION(2, "EINT9_1X"),
+		MTK_FUNCTION(3, "PWM2_2X"),
+		MTK_FUNCTION(6, "TEST_IN24"),
+		MTK_FUNCTION(7, "TEST_OUT24")
+	),
+	MTK_PIN(PINCTRL_PIN(34, "SDA1"),
+		"T2", "mt6397",
+		MTK_EINT_FUNCTION(2, 0),
+		MTK_FUNCTION(0, "GPIO34"),
+		MTK_FUNCTION(1, "SDA1"),
+		MTK_FUNCTION(2, "EINT0_1X"),
+		MTK_FUNCTION(6, "TEST_IN25"),
+		MTK_FUNCTION(7, "TEST_OUT25")
+	),
+	MTK_PIN(PINCTRL_PIN(35, "SCL2"),
+		"T3", "mt6397",
+		MTK_EINT_FUNCTION(2, 1),
+		MTK_FUNCTION(0, "GPIO35"),
+		MTK_FUNCTION(1, "SCL2"),
+		MTK_FUNCTION(2, "EINT1_1X"),
+		MTK_FUNCTION(3, "PWM3_2X"),
+		MTK_FUNCTION(6, "TEST_IN26"),
+		MTK_FUNCTION(7, "TEST_OUT26")
+	),
+	MTK_PIN(PINCTRL_PIN(36, "SDA2"),
+		"U2", "mt6397",
+		MTK_EINT_FUNCTION(2, 2),
+		MTK_FUNCTION(0, "GPIO36"),
+		MTK_FUNCTION(1, "SDA2"),
+		MTK_FUNCTION(2, "EINT2_1X"),
+		MTK_FUNCTION(6, "TEST_IN27"),
+		MTK_FUNCTION(7, "TEST_OUT27")
+	),
+	MTK_PIN(PINCTRL_PIN(37, "HDMISD"),
+		"H6", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO37"),
+		MTK_FUNCTION(1, "HDMISD"),
+		MTK_FUNCTION(6, "TEST_IN28"),
+		MTK_FUNCTION(7, "TEST_OUT28")
+	),
+	MTK_PIN(PINCTRL_PIN(38, "HDMISCK"),
+		"H5", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO38"),
+		MTK_FUNCTION(1, "HDMISCK"),
+		MTK_FUNCTION(6, "TEST_IN29"),
+		MTK_FUNCTION(7, "TEST_OUT29")
+	),
+	MTK_PIN(PINCTRL_PIN(39, "HTPLG"),
+		"H7", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO39"),
+		MTK_FUNCTION(1, "HTPLG"),
+		MTK_FUNCTION(6, "TEST_IN30"),
+		MTK_FUNCTION(7, "TEST_OUT30")
+	),
+	MTK_PIN(PINCTRL_PIN(40, "CEC"),
+		"J9", "mt6397",
+		MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
+		MTK_FUNCTION(0, "GPIO40"),
+		MTK_FUNCTION(1, "CEC"),
+		MTK_FUNCTION(6, "TEST_IN31"),
+		MTK_FUNCTION(7, "TEST_OUT31")
+	),
+};
+
+#endif /* __PINCTRL_MTK_MT6397_H */