Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 798 insertions, 0 deletions

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
new file mode 100644
index 000000000..cb965cf93
--- /dev/null
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Exynos ARMv8 specific support for Samsung pinctrl/gpiolib driver
+// with eint support.
+//
+// Copyright (c) 2012 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+// Copyright (c) 2012 Linaro Ltd
+//		http://www.linaro.org
+// Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org>
+//
+// This file contains the Samsung Exynos specific information required by the
+// the Samsung pinctrl/gpiolib driver. It also includes the implementation of
+// external gpio and wakeup interrupt support.
+
+#include <linux/slab.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+
+#include "pinctrl-samsung.h"
+#include "pinctrl-exynos.h"
+
+static const struct samsung_pin_bank_type bank_type_off = {
+	.fld_width = { 4, 1, 2, 2, 2, 2, },
+	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
+};
+
+static const struct samsung_pin_bank_type bank_type_alive = {
+	.fld_width = { 4, 1, 2, 2, },
+	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
+};
+
+/* Exynos5433 has the 4bit widths for PINCFG_TYPE_DRV bitfields. */
+static const struct samsung_pin_bank_type exynos5433_bank_type_off = {
+	.fld_width = { 4, 1, 2, 4, 2, 2, },
+	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
+};
+
+static const struct samsung_pin_bank_type exynos5433_bank_type_alive = {
+	.fld_width = { 4, 1, 2, 4, },
+	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
+};
+
+/*
+ * Bank type for non-alive type. Bit fields:
+ * CON: 4, DAT: 1, PUD: 4, DRV: 4, CONPDN: 2, PUDPDN: 4
+ */
+static const struct samsung_pin_bank_type exynos850_bank_type_off  = {
+	.fld_width = { 4, 1, 4, 4, 2, 4, },
+	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
+};
+
+/*
+ * Bank type for alive type. Bit fields:
+ * CON: 4, DAT: 1, PUD: 4, DRV: 4
+ */
+static const struct samsung_pin_bank_type exynos850_bank_type_alive = {
+	.fld_width = { 4, 1, 4, 4, },
+	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
+};
+
+/* Pad retention control code for accessing PMU regmap */
+static atomic_t exynos_shared_retention_refcnt;
+
+/* pin banks of exynos5433 pin-controller - ALIVE */
+static const struct samsung_pin_bank_data exynos5433_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS5433_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
+	EXYNOS5433_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
+	EXYNOS5433_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
+	EXYNOS5433_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
+	EXYNOS5433_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
+	EXYNOS5433_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
+	EXYNOS5433_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
+	EXYNOS5433_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
+	EXYNOS5433_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
+};
+
+/* pin banks of exynos5433 pin-controller - AUD */
+static const struct samsung_pin_bank_data exynos5433_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS5433_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
+	EXYNOS5433_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
+};
+
+/* pin banks of exynos5433 pin-controller - CPIF */
+static const struct samsung_pin_bank_data exynos5433_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS5433_PIN_BANK_EINTG(2, 0x000, "gpv6", 0x00),
+};
+
+/* pin banks of exynos5433 pin-controller - eSE */
+static const struct samsung_pin_bank_data exynos5433_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj2", 0x00),
+};
+
+/* pin banks of exynos5433 pin-controller - FINGER */
+static const struct samsung_pin_bank_data exynos5433_pin_banks4[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS5433_PIN_BANK_EINTG(4, 0x000, "gpd5", 0x00),
+};
+
+/* pin banks of exynos5433 pin-controller - FSYS */
+static const struct samsung_pin_bank_data exynos5433_pin_banks5[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gph1", 0x00),
+	EXYNOS5433_PIN_BANK_EINTG(7, 0x020, "gpr4", 0x04),
+	EXYNOS5433_PIN_BANK_EINTG(5, 0x040, "gpr0", 0x08),
+	EXYNOS5433_PIN_BANK_EINTG(8, 0x060, "gpr1", 0x0c),
+	EXYNOS5433_PIN_BANK_EINTG(2, 0x080, "gpr2", 0x10),
+	EXYNOS5433_PIN_BANK_EINTG(8, 0x0a0, "gpr3", 0x14),
+};
+
+/* pin banks of exynos5433 pin-controller - IMEM */
+static const struct samsung_pin_bank_data exynos5433_pin_banks6[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS5433_PIN_BANK_EINTG(8, 0x000, "gpf0", 0x00),
+};
+
+/* pin banks of exynos5433 pin-controller - NFC */
+static const struct samsung_pin_bank_data exynos5433_pin_banks7[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
+};
+
+/* pin banks of exynos5433 pin-controller - PERIC */
+static const struct samsung_pin_bank_data exynos5433_pin_banks8[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS5433_PIN_BANK_EINTG(6, 0x000, "gpv7", 0x00),
+	EXYNOS5433_PIN_BANK_EINTG(5, 0x020, "gpb0", 0x04),
+	EXYNOS5433_PIN_BANK_EINTG(8, 0x040, "gpc0", 0x08),
+	EXYNOS5433_PIN_BANK_EINTG(2, 0x060, "gpc1", 0x0c),
+	EXYNOS5433_PIN_BANK_EINTG(6, 0x080, "gpc2", 0x10),
+	EXYNOS5433_PIN_BANK_EINTG(8, 0x0a0, "gpc3", 0x14),
+	EXYNOS5433_PIN_BANK_EINTG(2, 0x0c0, "gpg0", 0x18),
+	EXYNOS5433_PIN_BANK_EINTG(4, 0x0e0, "gpd0", 0x1c),
+	EXYNOS5433_PIN_BANK_EINTG(6, 0x100, "gpd1", 0x20),
+	EXYNOS5433_PIN_BANK_EINTG(8, 0x120, "gpd2", 0x24),
+	EXYNOS5433_PIN_BANK_EINTG(5, 0x140, "gpd4", 0x28),
+	EXYNOS5433_PIN_BANK_EINTG(2, 0x160, "gpd8", 0x2c),
+	EXYNOS5433_PIN_BANK_EINTG(7, 0x180, "gpd6", 0x30),
+	EXYNOS5433_PIN_BANK_EINTG(3, 0x1a0, "gpd7", 0x34),
+	EXYNOS5433_PIN_BANK_EINTG(5, 0x1c0, "gpg1", 0x38),
+	EXYNOS5433_PIN_BANK_EINTG(2, 0x1e0, "gpg2", 0x3c),
+	EXYNOS5433_PIN_BANK_EINTG(8, 0x200, "gpg3", 0x40),
+};
+
+/* pin banks of exynos5433 pin-controller - TOUCH */
+static const struct samsung_pin_bank_data exynos5433_pin_banks9[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS5433_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
+};
+
+/* PMU pin retention groups registers for Exynos5433 (without audio & fsys) */
+static const u32 exynos5433_retention_regs[] = {
+	EXYNOS5433_PAD_RETENTION_TOP_OPTION,
+	EXYNOS5433_PAD_RETENTION_UART_OPTION,
+	EXYNOS5433_PAD_RETENTION_EBIA_OPTION,
+	EXYNOS5433_PAD_RETENTION_EBIB_OPTION,
+	EXYNOS5433_PAD_RETENTION_SPI_OPTION,
+	EXYNOS5433_PAD_RETENTION_MIF_OPTION,
+	EXYNOS5433_PAD_RETENTION_USBXTI_OPTION,
+	EXYNOS5433_PAD_RETENTION_BOOTLDO_OPTION,
+	EXYNOS5433_PAD_RETENTION_UFS_OPTION,
+	EXYNOS5433_PAD_RETENTION_FSYSGENIO_OPTION,
+};
+
+static const struct samsung_retention_data exynos5433_retention_data __initconst = {
+	.regs	 = exynos5433_retention_regs,
+	.nr_regs = ARRAY_SIZE(exynos5433_retention_regs),
+	.value	 = EXYNOS_WAKEUP_FROM_LOWPWR,
+	.refcnt	 = &exynos_shared_retention_refcnt,
+	.init	 = exynos_retention_init,
+};
+
+/* PMU retention control for audio pins can be tied to audio pin bank */
+static const u32 exynos5433_audio_retention_regs[] = {
+	EXYNOS5433_PAD_RETENTION_AUD_OPTION,
+};
+
+static const struct samsung_retention_data exynos5433_audio_retention_data __initconst = {
+	.regs	 = exynos5433_audio_retention_regs,
+	.nr_regs = ARRAY_SIZE(exynos5433_audio_retention_regs),
+	.value	 = EXYNOS_WAKEUP_FROM_LOWPWR,
+	.init	 = exynos_retention_init,
+};
+
+/* PMU retention control for mmc pins can be tied to fsys pin bank */
+static const u32 exynos5433_fsys_retention_regs[] = {
+	EXYNOS5433_PAD_RETENTION_MMC0_OPTION,
+	EXYNOS5433_PAD_RETENTION_MMC1_OPTION,
+	EXYNOS5433_PAD_RETENTION_MMC2_OPTION,
+};
+
+static const struct samsung_retention_data exynos5433_fsys_retention_data __initconst = {
+	.regs	 = exynos5433_fsys_retention_regs,
+	.nr_regs = ARRAY_SIZE(exynos5433_fsys_retention_regs),
+	.value	 = EXYNOS_WAKEUP_FROM_LOWPWR,
+	.init	 = exynos_retention_init,
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos5433 SoC. Exynos5433 SoC includes
+ * ten gpio/pin-mux/pinconfig controllers.
+ */
+static const struct samsung_pin_ctrl exynos5433_pin_ctrl[] __initconst = {
+	{
+		/* pin-controller instance 0 data */
+		.pin_banks	= exynos5433_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos5433_pin_banks0),
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.nr_ext_resources = 1,
+		.retention_data	= &exynos5433_retention_data,
+	}, {
+		/* pin-controller instance 1 data */
+		.pin_banks	= exynos5433_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos5433_pin_banks1),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.retention_data	= &exynos5433_audio_retention_data,
+	}, {
+		/* pin-controller instance 2 data */
+		.pin_banks	= exynos5433_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos5433_pin_banks2),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.retention_data	= &exynos5433_retention_data,
+	}, {
+		/* pin-controller instance 3 data */
+		.pin_banks	= exynos5433_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos5433_pin_banks3),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.retention_data	= &exynos5433_retention_data,
+	}, {
+		/* pin-controller instance 4 data */
+		.pin_banks	= exynos5433_pin_banks4,
+		.nr_banks	= ARRAY_SIZE(exynos5433_pin_banks4),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.retention_data	= &exynos5433_retention_data,
+	}, {
+		/* pin-controller instance 5 data */
+		.pin_banks	= exynos5433_pin_banks5,
+		.nr_banks	= ARRAY_SIZE(exynos5433_pin_banks5),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.retention_data	= &exynos5433_fsys_retention_data,
+	}, {
+		/* pin-controller instance 6 data */
+		.pin_banks	= exynos5433_pin_banks6,
+		.nr_banks	= ARRAY_SIZE(exynos5433_pin_banks6),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.retention_data	= &exynos5433_retention_data,
+	}, {
+		/* pin-controller instance 7 data */
+		.pin_banks	= exynos5433_pin_banks7,
+		.nr_banks	= ARRAY_SIZE(exynos5433_pin_banks7),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.retention_data	= &exynos5433_retention_data,
+	}, {
+		/* pin-controller instance 8 data */
+		.pin_banks	= exynos5433_pin_banks8,
+		.nr_banks	= ARRAY_SIZE(exynos5433_pin_banks8),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.retention_data	= &exynos5433_retention_data,
+	}, {
+		/* pin-controller instance 9 data */
+		.pin_banks	= exynos5433_pin_banks9,
+		.nr_banks	= ARRAY_SIZE(exynos5433_pin_banks9),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.retention_data	= &exynos5433_retention_data,
+	},
+};
+
+const struct samsung_pinctrl_of_match_data exynos5433_of_data __initconst = {
+	.ctrl		= exynos5433_pin_ctrl,
+	.num_ctrl	= ARRAY_SIZE(exynos5433_pin_ctrl),
+};
+
+/* pin banks of exynos7 pin-controller - ALIVE */
+static const struct samsung_pin_bank_data exynos7_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
+	EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
+};
+
+/* pin banks of exynos7 pin-controller - BUS0 */
+static const struct samsung_pin_bank_data exynos7_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc0", 0x04),
+	EXYNOS_PIN_BANK_EINTG(2, 0x040, "gpc1", 0x08),
+	EXYNOS_PIN_BANK_EINTG(6, 0x060, "gpc2", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpc3", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0a0, "gpd0", 0x14),
+	EXYNOS_PIN_BANK_EINTG(6, 0x0c0, "gpd1", 0x18),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0e0, "gpd2", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(5, 0x100, "gpd4", 0x20),
+	EXYNOS_PIN_BANK_EINTG(4, 0x120, "gpd5", 0x24),
+	EXYNOS_PIN_BANK_EINTG(6, 0x140, "gpd6", 0x28),
+	EXYNOS_PIN_BANK_EINTG(3, 0x160, "gpd7", 0x2c),
+	EXYNOS_PIN_BANK_EINTG(2, 0x180, "gpd8", 0x30),
+	EXYNOS_PIN_BANK_EINTG(2, 0x1a0, "gpg0", 0x34),
+	EXYNOS_PIN_BANK_EINTG(4, 0x1c0, "gpg3", 0x38),
+};
+
+/* pin banks of exynos7 pin-controller - NFC */
+static const struct samsung_pin_bank_data exynos7_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj0", 0x00),
+};
+
+/* pin banks of exynos7 pin-controller - TOUCH */
+static const struct samsung_pin_bank_data exynos7_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS_PIN_BANK_EINTG(3, 0x000, "gpj1", 0x00),
+};
+
+/* pin banks of exynos7 pin-controller - FF */
+static const struct samsung_pin_bank_data exynos7_pin_banks4[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpg4", 0x00),
+};
+
+/* pin banks of exynos7 pin-controller - ESE */
+static const struct samsung_pin_bank_data exynos7_pin_banks5[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpv7", 0x00),
+};
+
+/* pin banks of exynos7 pin-controller - FSYS0 */
+static const struct samsung_pin_bank_data exynos7_pin_banks6[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpr4", 0x00),
+};
+
+/* pin banks of exynos7 pin-controller - FSYS1 */
+static const struct samsung_pin_bank_data exynos7_pin_banks7[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS_PIN_BANK_EINTG(4, 0x000, "gpr0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpr1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(5, 0x040, "gpr2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpr3", 0x0c),
+};
+
+/* pin banks of exynos7 pin-controller - BUS1 */
+static const struct samsung_pin_bank_data exynos7_pin_banks8[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpf0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpf1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpf3", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0a0, "gpf4", 0x10),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0c0, "gpf5", 0x14),
+	EXYNOS_PIN_BANK_EINTG(5, 0x0e0, "gpg1", 0x18),
+	EXYNOS_PIN_BANK_EINTG(5, 0x100, "gpg2", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(6, 0x120, "gph1", 0x20),
+	EXYNOS_PIN_BANK_EINTG(3, 0x140, "gpv6", 0x24),
+};
+
+static const struct samsung_pin_bank_data exynos7_pin_banks9[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(4, 0x020, "gpz1", 0x04),
+};
+
+static const struct samsung_pin_ctrl exynos7_pin_ctrl[] __initconst = {
+	{
+		/* pin-controller instance 0 Alive data */
+		.pin_banks	= exynos7_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks0),
+		.eint_wkup_init = exynos_eint_wkup_init,
+	}, {
+		/* pin-controller instance 1 BUS0 data */
+		.pin_banks	= exynos7_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks1),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 2 NFC data */
+		.pin_banks	= exynos7_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks2),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 3 TOUCH data */
+		.pin_banks	= exynos7_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks3),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 4 FF data */
+		.pin_banks	= exynos7_pin_banks4,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks4),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 5 ESE data */
+		.pin_banks	= exynos7_pin_banks5,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks5),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 6 FSYS0 data */
+		.pin_banks	= exynos7_pin_banks6,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks6),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 7 FSYS1 data */
+		.pin_banks	= exynos7_pin_banks7,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks7),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 8 BUS1 data */
+		.pin_banks	= exynos7_pin_banks8,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks8),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 9 AUD data */
+		.pin_banks	= exynos7_pin_banks9,
+		.nr_banks	= ARRAY_SIZE(exynos7_pin_banks9),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	},
+};
+
+const struct samsung_pinctrl_of_match_data exynos7_of_data __initconst = {
+	.ctrl		= exynos7_pin_ctrl,
+	.num_ctrl	= ARRAY_SIZE(exynos7_pin_ctrl),
+};
+
+/* pin banks of exynos7885 pin-controller 0 (ALIVE) */
+static const struct samsung_pin_bank_data exynos7885_pin_banks0[] __initconst = {
+	EXYNOS_PIN_BANK_EINTN(3, 0x000, "etc0"),
+	EXYNOS_PIN_BANK_EINTN(3, 0x020, "etc1"),
+	EXYNOS850_PIN_BANK_EINTW(8, 0x040, "gpa0", 0x00),
+	EXYNOS850_PIN_BANK_EINTW(8, 0x060, "gpa1", 0x04),
+	EXYNOS850_PIN_BANK_EINTW(8, 0x080, "gpa2", 0x08),
+	EXYNOS850_PIN_BANK_EINTW(5, 0x0a0, "gpq0", 0x0c),
+};
+
+/* pin banks of exynos7885 pin-controller 1 (DISPAUD) */
+static const struct samsung_pin_bank_data exynos7885_pin_banks1[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(4, 0x020, "gpb1", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(5, 0x040, "gpb2", 0x08),
+};
+
+/* pin banks of exynos7885 pin-controller 2 (FSYS) */
+static const struct samsung_pin_bank_data exynos7885_pin_banks2[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(4, 0x000, "gpf0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpf2", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(6, 0x040, "gpf3", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(6, 0x060, "gpf4", 0x0c),
+};
+
+/* pin banks of exynos7885 pin-controller 3 (TOP) */
+static const struct samsung_pin_bank_data exynos7885_pin_banks3[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(4, 0x000, "gpp0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(3, 0x020, "gpg0", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(4, 0x040, "gpp1", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(4, 0x060, "gpp2", 0x0c),
+	EXYNOS850_PIN_BANK_EINTG(3, 0x080, "gpp3", 0x10),
+	EXYNOS850_PIN_BANK_EINTG(6, 0x0a0, "gpp4", 0x14),
+	EXYNOS850_PIN_BANK_EINTG(4, 0x0c0, "gpp5", 0x18),
+	EXYNOS850_PIN_BANK_EINTG(5, 0x0e0, "gpp6", 0x1c),
+	EXYNOS850_PIN_BANK_EINTG(2, 0x100, "gpp7", 0x20),
+	EXYNOS850_PIN_BANK_EINTG(2, 0x120, "gpp8", 0x24),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x140, "gpg1", 0x28),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x160, "gpg2", 0x2c),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x180, "gpg3", 0x30),
+	EXYNOS850_PIN_BANK_EINTG(2, 0x1a0, "gpg4", 0x34),
+	EXYNOS850_PIN_BANK_EINTG(4, 0x1c0, "gpc0", 0x38),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x1e0, "gpc1", 0x3c),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x200, "gpc2", 0x40),
+};
+
+static const struct samsung_pin_ctrl exynos7885_pin_ctrl[] __initconst = {
+	{
+		/* pin-controller instance 0 Alive data */
+		.pin_banks	= exynos7885_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos7885_pin_banks0),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 1 DISPAUD data */
+		.pin_banks	= exynos7885_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos7885_pin_banks1),
+	}, {
+		/* pin-controller instance 2 FSYS data */
+		.pin_banks	= exynos7885_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos7885_pin_banks2),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 3 TOP data */
+		.pin_banks	= exynos7885_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos7885_pin_banks3),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	},
+};
+
+const struct samsung_pinctrl_of_match_data exynos7885_of_data __initconst = {
+	.ctrl		= exynos7885_pin_ctrl,
+	.num_ctrl	= ARRAY_SIZE(exynos7885_pin_ctrl),
+};
+
+/* pin banks of exynos850 pin-controller 0 (ALIVE) */
+static const struct samsung_pin_bank_data exynos850_pin_banks0[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS850_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
+	EXYNOS850_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
+	EXYNOS850_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
+	EXYNOS850_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
+	EXYNOS850_PIN_BANK_EINTW(4, 0x080, "gpa4", 0x10),
+	EXYNOS850_PIN_BANK_EINTN(3, 0x0a0, "gpq0"),
+};
+
+/* pin banks of exynos850 pin-controller 1 (CMGP) */
+static const struct samsung_pin_bank_data exynos850_pin_banks1[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS850_PIN_BANK_EINTW(1, 0x000, "gpm0", 0x00),
+	EXYNOS850_PIN_BANK_EINTW(1, 0x020, "gpm1", 0x04),
+	EXYNOS850_PIN_BANK_EINTW(1, 0x040, "gpm2", 0x08),
+	EXYNOS850_PIN_BANK_EINTW(1, 0x060, "gpm3", 0x0c),
+	EXYNOS850_PIN_BANK_EINTW(1, 0x080, "gpm4", 0x10),
+	EXYNOS850_PIN_BANK_EINTW(1, 0x0a0, "gpm5", 0x14),
+	EXYNOS850_PIN_BANK_EINTW(1, 0x0c0, "gpm6", 0x18),
+	EXYNOS850_PIN_BANK_EINTW(1, 0x0e0, "gpm7", 0x1c),
+};
+
+/* pin banks of exynos850 pin-controller 2 (AUD) */
+static const struct samsung_pin_bank_data exynos850_pin_banks2[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS850_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(5, 0x020, "gpb1", 0x04),
+};
+
+/* pin banks of exynos850 pin-controller 3 (HSI) */
+static const struct samsung_pin_bank_data exynos850_pin_banks3[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS850_PIN_BANK_EINTG(6, 0x000, "gpf2", 0x00),
+};
+
+/* pin banks of exynos850 pin-controller 4 (CORE) */
+static const struct samsung_pin_bank_data exynos850_pin_banks4[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS850_PIN_BANK_EINTG(4, 0x000, "gpf0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpf1", 0x04),
+};
+
+/* pin banks of exynos850 pin-controller 5 (PERI) */
+static const struct samsung_pin_bank_data exynos850_pin_banks5[] __initconst = {
+	/* Must start with EINTG banks, ordered by EINT group number. */
+	EXYNOS850_PIN_BANK_EINTG(2, 0x000, "gpg0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(6, 0x020, "gpp0", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(4, 0x040, "gpp1", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(4, 0x060, "gpp2", 0x0c),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x080, "gpg1", 0x10),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x0a0, "gpg2", 0x14),
+	EXYNOS850_PIN_BANK_EINTG(1, 0x0c0, "gpg3", 0x18),
+	EXYNOS850_PIN_BANK_EINTG(3, 0x0e0, "gpc0", 0x1c),
+	EXYNOS850_PIN_BANK_EINTG(6, 0x100, "gpc1", 0x20),
+};
+
+static const struct samsung_pin_ctrl exynos850_pin_ctrl[] __initconst = {
+	{
+		/* pin-controller instance 0 ALIVE data */
+		.pin_banks	= exynos850_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks0),
+		.eint_wkup_init = exynos_eint_wkup_init,
+	}, {
+		/* pin-controller instance 1 CMGP data */
+		.pin_banks	= exynos850_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks1),
+		.eint_wkup_init = exynos_eint_wkup_init,
+	}, {
+		/* pin-controller instance 2 AUD data */
+		.pin_banks	= exynos850_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks2),
+	}, {
+		/* pin-controller instance 3 HSI data */
+		.pin_banks	= exynos850_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks3),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 4 CORE data */
+		.pin_banks	= exynos850_pin_banks4,
+		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks4),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	}, {
+		/* pin-controller instance 5 PERI data */
+		.pin_banks	= exynos850_pin_banks5,
+		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks5),
+		.eint_gpio_init = exynos_eint_gpio_init,
+	},
+};
+
+const struct samsung_pinctrl_of_match_data exynos850_of_data __initconst = {
+	.ctrl		= exynos850_pin_ctrl,
+	.num_ctrl	= ARRAY_SIZE(exynos850_pin_ctrl),
+};
+
+/* pin banks of exynosautov9 pin-controller 0 (ALIVE) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks0[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
+	EXYNOS850_PIN_BANK_EINTW(2, 0x020, "gpa1", 0x04),
+	EXYNOS850_PIN_BANK_EINTN(2, 0x040, "gpq0"),
+};
+
+/* pin banks of exynosautov9 pin-controller 1 (AUD) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks1[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpb1", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x040, "gpb2", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x060, "gpb3", 0x0C),
+};
+
+/* pin banks of exynosautov9 pin-controller 2 (FSYS0) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks2[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(6, 0x000, "gpf0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(6, 0x020, "gpf1", 0x04),
+};
+
+/* pin banks of exynosautov9 pin-controller 3 (FSYS1) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks3[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(6, 0x000, "gpf8", 0x00),
+};
+
+/* pin banks of exynosautov9 pin-controller 4 (FSYS2) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks4[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(4, 0x000, "gpf2", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpf3", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(7, 0x040, "gpf4", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x060, "gpf5", 0x0C),
+	EXYNOS850_PIN_BANK_EINTG(7, 0x080, "gpf6", 0x10),
+};
+
+/* pin banks of exynosautov9 pin-controller 5 (PERIC0) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks5[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(8, 0x000, "gpp0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpp1", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x040, "gpp2", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(5, 0x060, "gpg0", 0x0C),
+};
+
+/* pin banks of exynosautov9 pin-controller 6 (PERIC1) */
+static const struct samsung_pin_bank_data exynosautov9_pin_banks6[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(8, 0x000, "gpp3", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpp4", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x040, "gpp5", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x060, "gpg1", 0x0C),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x080, "gpg2", 0x10),
+	EXYNOS850_PIN_BANK_EINTG(4, 0x0A0, "gpg3", 0x14),
+};
+
+static const struct samsung_pin_ctrl exynosautov9_pin_ctrl[] __initconst = {
+	{
+		/* pin-controller instance 0 ALIVE data */
+		.pin_banks      = exynosautov9_pin_banks0,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks0),
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 1 AUD data */
+		.pin_banks      = exynosautov9_pin_banks1,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks1),
+	}, {
+		/* pin-controller instance 2 FSYS0 data */
+		.pin_banks      = exynosautov9_pin_banks2,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks2),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 3 FSYS1 data */
+		.pin_banks      = exynosautov9_pin_banks3,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks3),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 4 FSYS2 data */
+		.pin_banks      = exynosautov9_pin_banks4,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks4),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 5 PERIC0 data */
+		.pin_banks      = exynosautov9_pin_banks5,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks5),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 6 PERIC1 data */
+		.pin_banks      = exynosautov9_pin_banks6,
+		.nr_banks       = ARRAY_SIZE(exynosautov9_pin_banks6),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend        = exynos_pinctrl_suspend,
+		.resume         = exynos_pinctrl_resume,
+	},
+};
+
+const struct samsung_pinctrl_of_match_data exynosautov9_of_data __initconst = {
+	.ctrl		= exynosautov9_pin_ctrl,
+	.num_ctrl	= ARRAY_SIZE(exynosautov9_pin_ctrl),
+};
+
+/*
+ * Pinctrl driver data for Tesla FSD SoC. FSD SoC includes three
+ * gpio/pin-mux/pinconfig controllers.
+ */
+
+/* pin banks of FSD pin-controller 0 (FSYS) */
+static const struct samsung_pin_bank_data fsd_pin_banks0[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(7, 0x00, "gpf0", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x20, "gpf1", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(3, 0x40, "gpf6", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(2, 0x60, "gpf4", 0x0c),
+	EXYNOS850_PIN_BANK_EINTG(6, 0x80, "gpf5", 0x10),
+};
+
+/* pin banks of FSD pin-controller 1 (PERIC) */
+static const struct samsung_pin_bank_data fsd_pin_banks1[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTG(4, 0x000, "gpc8", 0x00),
+	EXYNOS850_PIN_BANK_EINTG(7, 0x020, "gpf2", 0x04),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x040, "gpf3", 0x08),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x060, "gpd0", 0x0c),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x080, "gpb0", 0x10),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x0a0, "gpb1", 0x14),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x0c0, "gpb4", 0x18),
+	EXYNOS850_PIN_BANK_EINTG(4, 0x0e0, "gpb5", 0x1c),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x100, "gpb6", 0x20),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x120, "gpb7", 0x24),
+	EXYNOS850_PIN_BANK_EINTG(5, 0x140, "gpd1", 0x28),
+	EXYNOS850_PIN_BANK_EINTG(5, 0x160, "gpd2", 0x2c),
+	EXYNOS850_PIN_BANK_EINTG(7, 0x180, "gpd3", 0x30),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x1a0, "gpg0", 0x34),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x1c0, "gpg1", 0x38),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x1e0, "gpg2", 0x3c),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x200, "gpg3", 0x40),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x220, "gpg4", 0x44),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x240, "gpg5", 0x48),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x260, "gpg6", 0x4c),
+	EXYNOS850_PIN_BANK_EINTG(8, 0x280, "gpg7", 0x50),
+};
+
+/* pin banks of FSD pin-controller 2 (PMU) */
+static const struct samsung_pin_bank_data fsd_pin_banks2[] __initconst = {
+	EXYNOS850_PIN_BANK_EINTN(3, 0x00, "gpq0"),
+};
+
+static const struct samsung_pin_ctrl fsd_pin_ctrl[] __initconst = {
+	{
+		/* pin-controller instance 0 FSYS0 data */
+		.pin_banks	= fsd_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(fsd_pin_banks0),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 1 PERIC data */
+		.pin_banks	= fsd_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(fsd_pin_banks1),
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+	}, {
+		/* pin-controller instance 2 PMU data */
+		.pin_banks	= fsd_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(fsd_pin_banks2),
+	},
+};
+
+const struct samsung_pinctrl_of_match_data fsd_of_data __initconst = {
+	.ctrl		= fsd_pin_ctrl,
+	.num_ctrl	= ARRAY_SIZE(fsd_pin_ctrl),
+};