Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 685 insertions, 0 deletions

diff --git a/drivers/pinctrl/spear/pinctrl-spear300.c b/drivers/pinctrl/spear/pinctrl-spear300.c
new file mode 100644
index 000000000..d53a04597
--- /dev/null
+++ b/drivers/pinctrl/spear/pinctrl-spear300.c
@@ -0,0 +1,685 @@
+/*
+ * Driver for the ST Microelectronics SPEAr300 pinmux
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "pinctrl-spear3xx.h"
+
+#define DRIVER_NAME "spear300-pinmux"
+
+/* addresses */
+#define PMX_CONFIG_REG			0x00
+#define MODE_CONFIG_REG			0x04
+
+/* modes */
+#define NAND_MODE			(1 << 0)
+#define NOR_MODE			(1 << 1)
+#define PHOTO_FRAME_MODE		(1 << 2)
+#define LEND_IP_PHONE_MODE		(1 << 3)
+#define HEND_IP_PHONE_MODE		(1 << 4)
+#define LEND_WIFI_PHONE_MODE		(1 << 5)
+#define HEND_WIFI_PHONE_MODE		(1 << 6)
+#define ATA_PABX_WI2S_MODE		(1 << 7)
+#define ATA_PABX_I2S_MODE		(1 << 8)
+#define CAML_LCDW_MODE			(1 << 9)
+#define CAMU_LCD_MODE			(1 << 10)
+#define CAMU_WLCD_MODE			(1 << 11)
+#define CAML_LCD_MODE			(1 << 12)
+
+static struct spear_pmx_mode pmx_mode_nand = {
+	.name = "nand",
+	.mode = NAND_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x00,
+};
+
+static struct spear_pmx_mode pmx_mode_nor = {
+	.name = "nor",
+	.mode = NOR_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x01,
+};
+
+static struct spear_pmx_mode pmx_mode_photo_frame = {
+	.name = "photo frame mode",
+	.mode = PHOTO_FRAME_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x02,
+};
+
+static struct spear_pmx_mode pmx_mode_lend_ip_phone = {
+	.name = "lend ip phone mode",
+	.mode = LEND_IP_PHONE_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x03,
+};
+
+static struct spear_pmx_mode pmx_mode_hend_ip_phone = {
+	.name = "hend ip phone mode",
+	.mode = HEND_IP_PHONE_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x04,
+};
+
+static struct spear_pmx_mode pmx_mode_lend_wifi_phone = {
+	.name = "lend wifi phone mode",
+	.mode = LEND_WIFI_PHONE_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x05,
+};
+
+static struct spear_pmx_mode pmx_mode_hend_wifi_phone = {
+	.name = "hend wifi phone mode",
+	.mode = HEND_WIFI_PHONE_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x06,
+};
+
+static struct spear_pmx_mode pmx_mode_ata_pabx_wi2s = {
+	.name = "ata pabx wi2s mode",
+	.mode = ATA_PABX_WI2S_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x07,
+};
+
+static struct spear_pmx_mode pmx_mode_ata_pabx_i2s = {
+	.name = "ata pabx i2s mode",
+	.mode = ATA_PABX_I2S_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x08,
+};
+
+static struct spear_pmx_mode pmx_mode_caml_lcdw = {
+	.name = "caml lcdw mode",
+	.mode = CAML_LCDW_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x0C,
+};
+
+static struct spear_pmx_mode pmx_mode_camu_lcd = {
+	.name = "camu lcd mode",
+	.mode = CAMU_LCD_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x0D,
+};
+
+static struct spear_pmx_mode pmx_mode_camu_wlcd = {
+	.name = "camu wlcd mode",
+	.mode = CAMU_WLCD_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0xE,
+};
+
+static struct spear_pmx_mode pmx_mode_caml_lcd = {
+	.name = "caml lcd mode",
+	.mode = CAML_LCD_MODE,
+	.reg = MODE_CONFIG_REG,
+	.mask = 0x0000000F,
+	.val = 0x0F,
+};
+
+static struct spear_pmx_mode *spear300_pmx_modes[] = {
+	&pmx_mode_nand,
+	&pmx_mode_nor,
+	&pmx_mode_photo_frame,
+	&pmx_mode_lend_ip_phone,
+	&pmx_mode_hend_ip_phone,
+	&pmx_mode_lend_wifi_phone,
+	&pmx_mode_hend_wifi_phone,
+	&pmx_mode_ata_pabx_wi2s,
+	&pmx_mode_ata_pabx_i2s,
+	&pmx_mode_caml_lcdw,
+	&pmx_mode_camu_lcd,
+	&pmx_mode_camu_wlcd,
+	&pmx_mode_caml_lcd,
+};
+
+/* fsmc_2chips_pins */
+static const unsigned fsmc_2chips_pins[] = { 1, 97 };
+static struct spear_muxreg fsmc_2chips_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_FIRDA_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux fsmc_2chips_modemux[] = {
+	{
+		.modes = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
+			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
+		.muxregs = fsmc_2chips_muxreg,
+		.nmuxregs = ARRAY_SIZE(fsmc_2chips_muxreg),
+	},
+};
+
+static struct spear_pingroup fsmc_2chips_pingroup = {
+	.name = "fsmc_2chips_grp",
+	.pins = fsmc_2chips_pins,
+	.npins = ARRAY_SIZE(fsmc_2chips_pins),
+	.modemuxs = fsmc_2chips_modemux,
+	.nmodemuxs = ARRAY_SIZE(fsmc_2chips_modemux),
+};
+
+/* fsmc_4chips_pins */
+static const unsigned fsmc_4chips_pins[] = { 1, 2, 3, 97 };
+static struct spear_muxreg fsmc_4chips_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux fsmc_4chips_modemux[] = {
+	{
+		.modes = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
+			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
+		.muxregs = fsmc_4chips_muxreg,
+		.nmuxregs = ARRAY_SIZE(fsmc_4chips_muxreg),
+	},
+};
+
+static struct spear_pingroup fsmc_4chips_pingroup = {
+	.name = "fsmc_4chips_grp",
+	.pins = fsmc_4chips_pins,
+	.npins = ARRAY_SIZE(fsmc_4chips_pins),
+	.modemuxs = fsmc_4chips_modemux,
+	.nmodemuxs = ARRAY_SIZE(fsmc_4chips_modemux),
+};
+
+static const char *const fsmc_grps[] = { "fsmc_2chips_grp", "fsmc_4chips_grp"
+};
+static struct spear_function fsmc_function = {
+	.name = "fsmc",
+	.groups = fsmc_grps,
+	.ngroups = ARRAY_SIZE(fsmc_grps),
+};
+
+/* clcd_lcdmode_pins */
+static const unsigned clcd_lcdmode_pins[] = { 49, 50 };
+static struct spear_muxreg clcd_lcdmode_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux clcd_lcdmode_modemux[] = {
+	{
+		.modes = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+			CAMU_LCD_MODE | CAML_LCD_MODE,
+		.muxregs = clcd_lcdmode_muxreg,
+		.nmuxregs = ARRAY_SIZE(clcd_lcdmode_muxreg),
+	},
+};
+
+static struct spear_pingroup clcd_lcdmode_pingroup = {
+	.name = "clcd_lcdmode_grp",
+	.pins = clcd_lcdmode_pins,
+	.npins = ARRAY_SIZE(clcd_lcdmode_pins),
+	.modemuxs = clcd_lcdmode_modemux,
+	.nmodemuxs = ARRAY_SIZE(clcd_lcdmode_modemux),
+};
+
+/* clcd_pfmode_pins */
+static const unsigned clcd_pfmode_pins[] = { 47, 48, 49, 50 };
+static struct spear_muxreg clcd_pfmode_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_TIMER_2_3_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux clcd_pfmode_modemux[] = {
+	{
+		.modes = PHOTO_FRAME_MODE,
+		.muxregs = clcd_pfmode_muxreg,
+		.nmuxregs = ARRAY_SIZE(clcd_pfmode_muxreg),
+	},
+};
+
+static struct spear_pingroup clcd_pfmode_pingroup = {
+	.name = "clcd_pfmode_grp",
+	.pins = clcd_pfmode_pins,
+	.npins = ARRAY_SIZE(clcd_pfmode_pins),
+	.modemuxs = clcd_pfmode_modemux,
+	.nmodemuxs = ARRAY_SIZE(clcd_pfmode_modemux),
+};
+
+static const char *const clcd_grps[] = { "clcd_lcdmode_grp", "clcd_pfmode_grp"
+};
+static struct spear_function clcd_function = {
+	.name = "clcd",
+	.groups = clcd_grps,
+	.ngroups = ARRAY_SIZE(clcd_grps),
+};
+
+/* tdm_pins */
+static const unsigned tdm_pins[] = { 34, 35, 36, 37, 38 };
+static struct spear_muxreg tdm_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux tdm_modemux[] = {
+	{
+		.modes = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
+			| HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
+			| ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+			| CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.muxregs = tdm_muxreg,
+		.nmuxregs = ARRAY_SIZE(tdm_muxreg),
+	},
+};
+
+static struct spear_pingroup tdm_pingroup = {
+	.name = "tdm_grp",
+	.pins = tdm_pins,
+	.npins = ARRAY_SIZE(tdm_pins),
+	.modemuxs = tdm_modemux,
+	.nmodemuxs = ARRAY_SIZE(tdm_modemux),
+};
+
+static const char *const tdm_grps[] = { "tdm_grp" };
+static struct spear_function tdm_function = {
+	.name = "tdm",
+	.groups = tdm_grps,
+	.ngroups = ARRAY_SIZE(tdm_grps),
+};
+
+/* i2c_clk_pins */
+static const unsigned i2c_clk_pins[] = { 45, 46, 47, 48 };
+static struct spear_muxreg i2c_clk_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2c_clk_modemux[] = {
+	{
+		.modes = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
+			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE | CAML_LCDW_MODE
+			| CAML_LCD_MODE,
+		.muxregs = i2c_clk_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2c_clk_muxreg),
+	},
+};
+
+static struct spear_pingroup i2c_clk_pingroup = {
+	.name = "i2c_clk_grp_grp",
+	.pins = i2c_clk_pins,
+	.npins = ARRAY_SIZE(i2c_clk_pins),
+	.modemuxs = i2c_clk_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2c_clk_modemux),
+};
+
+static const char *const i2c_grps[] = { "i2c_clk_grp" };
+static struct spear_function i2c_function = {
+	.name = "i2c1",
+	.groups = i2c_grps,
+	.ngroups = ARRAY_SIZE(i2c_grps),
+};
+
+/* caml_pins */
+static const unsigned caml_pins[] = { 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 };
+static struct spear_muxreg caml_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_MII_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux caml_modemux[] = {
+	{
+		.modes = CAML_LCDW_MODE | CAML_LCD_MODE,
+		.muxregs = caml_muxreg,
+		.nmuxregs = ARRAY_SIZE(caml_muxreg),
+	},
+};
+
+static struct spear_pingroup caml_pingroup = {
+	.name = "caml_grp",
+	.pins = caml_pins,
+	.npins = ARRAY_SIZE(caml_pins),
+	.modemuxs = caml_modemux,
+	.nmodemuxs = ARRAY_SIZE(caml_modemux),
+};
+
+/* camu_pins */
+static const unsigned camu_pins[] = { 16, 17, 18, 19, 20, 21, 45, 46, 47, 48 };
+static struct spear_muxreg camu_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK | PMX_MII_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux camu_modemux[] = {
+	{
+		.modes = CAMU_LCD_MODE | CAMU_WLCD_MODE,
+		.muxregs = camu_muxreg,
+		.nmuxregs = ARRAY_SIZE(camu_muxreg),
+	},
+};
+
+static struct spear_pingroup camu_pingroup = {
+	.name = "camu_grp",
+	.pins = camu_pins,
+	.npins = ARRAY_SIZE(camu_pins),
+	.modemuxs = camu_modemux,
+	.nmodemuxs = ARRAY_SIZE(camu_modemux),
+};
+
+static const char *const cam_grps[] = { "caml_grp", "camu_grp" };
+static struct spear_function cam_function = {
+	.name = "cam",
+	.groups = cam_grps,
+	.ngroups = ARRAY_SIZE(cam_grps),
+};
+
+/* dac_pins */
+static const unsigned dac_pins[] = { 43, 44 };
+static struct spear_muxreg dac_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_TIMER_0_1_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux dac_modemux[] = {
+	{
+		.modes = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+			| CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.muxregs = dac_muxreg,
+		.nmuxregs = ARRAY_SIZE(dac_muxreg),
+	},
+};
+
+static struct spear_pingroup dac_pingroup = {
+	.name = "dac_grp",
+	.pins = dac_pins,
+	.npins = ARRAY_SIZE(dac_pins),
+	.modemuxs = dac_modemux,
+	.nmodemuxs = ARRAY_SIZE(dac_modemux),
+};
+
+static const char *const dac_grps[] = { "dac_grp" };
+static struct spear_function dac_function = {
+	.name = "dac",
+	.groups = dac_grps,
+	.ngroups = ARRAY_SIZE(dac_grps),
+};
+
+/* i2s_pins */
+static const unsigned i2s_pins[] = { 39, 40, 41, 42 };
+static struct spear_muxreg i2s_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_UART0_MODEM_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux i2s_modemux[] = {
+	{
+		.modes = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
+			| LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+			ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+			| CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.muxregs = i2s_muxreg,
+		.nmuxregs = ARRAY_SIZE(i2s_muxreg),
+	},
+};
+
+static struct spear_pingroup i2s_pingroup = {
+	.name = "i2s_grp",
+	.pins = i2s_pins,
+	.npins = ARRAY_SIZE(i2s_pins),
+	.modemuxs = i2s_modemux,
+	.nmodemuxs = ARRAY_SIZE(i2s_modemux),
+};
+
+static const char *const i2s_grps[] = { "i2s_grp" };
+static struct spear_function i2s_function = {
+	.name = "i2s",
+	.groups = i2s_grps,
+	.ngroups = ARRAY_SIZE(i2s_grps),
+};
+
+/* sdhci_4bit_pins */
+static const unsigned sdhci_4bit_pins[] = { 28, 29, 30, 31, 32, 33 };
+static struct spear_muxreg sdhci_4bit_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
+			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux sdhci_4bit_modemux[] = {
+	{
+		.modes = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
+			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
+			CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE,
+		.muxregs = sdhci_4bit_muxreg,
+		.nmuxregs = ARRAY_SIZE(sdhci_4bit_muxreg),
+	},
+};
+
+static struct spear_pingroup sdhci_4bit_pingroup = {
+	.name = "sdhci_4bit_grp",
+	.pins = sdhci_4bit_pins,
+	.npins = ARRAY_SIZE(sdhci_4bit_pins),
+	.modemuxs = sdhci_4bit_modemux,
+	.nmodemuxs = ARRAY_SIZE(sdhci_4bit_modemux),
+};
+
+/* sdhci_8bit_pins */
+static const unsigned sdhci_8bit_pins[] = { 24, 25, 26, 27, 28, 29, 30, 31, 32,
+	33 };
+static struct spear_muxreg sdhci_8bit_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
+			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux sdhci_8bit_modemux[] = {
+	{
+		.modes = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
+			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
+			CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.muxregs = sdhci_8bit_muxreg,
+		.nmuxregs = ARRAY_SIZE(sdhci_8bit_muxreg),
+	},
+};
+
+static struct spear_pingroup sdhci_8bit_pingroup = {
+	.name = "sdhci_8bit_grp",
+	.pins = sdhci_8bit_pins,
+	.npins = ARRAY_SIZE(sdhci_8bit_pins),
+	.modemuxs = sdhci_8bit_modemux,
+	.nmodemuxs = ARRAY_SIZE(sdhci_8bit_modemux),
+};
+
+static const char *const sdhci_grps[] = { "sdhci_4bit_grp", "sdhci_8bit_grp" };
+static struct spear_function sdhci_function = {
+	.name = "sdhci",
+	.groups = sdhci_grps,
+	.ngroups = ARRAY_SIZE(sdhci_grps),
+};
+
+/* gpio1_0_to_3_pins */
+static const unsigned gpio1_0_to_3_pins[] = { 39, 40, 41, 42 };
+static struct spear_muxreg gpio1_0_to_3_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_UART0_MODEM_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux gpio1_0_to_3_modemux[] = {
+	{
+		.modes = PHOTO_FRAME_MODE,
+		.muxregs = gpio1_0_to_3_muxreg,
+		.nmuxregs = ARRAY_SIZE(gpio1_0_to_3_muxreg),
+	},
+};
+
+static struct spear_pingroup gpio1_0_to_3_pingroup = {
+	.name = "gpio1_0_to_3_grp",
+	.pins = gpio1_0_to_3_pins,
+	.npins = ARRAY_SIZE(gpio1_0_to_3_pins),
+	.modemuxs = gpio1_0_to_3_modemux,
+	.nmodemuxs = ARRAY_SIZE(gpio1_0_to_3_modemux),
+};
+
+/* gpio1_4_to_7_pins */
+static const unsigned gpio1_4_to_7_pins[] = { 43, 44, 45, 46 };
+
+static struct spear_muxreg gpio1_4_to_7_muxreg[] = {
+	{
+		.reg = PMX_CONFIG_REG,
+		.mask = PMX_TIMER_0_1_MASK | PMX_TIMER_2_3_MASK,
+		.val = 0,
+	},
+};
+
+static struct spear_modemux gpio1_4_to_7_modemux[] = {
+	{
+		.modes = PHOTO_FRAME_MODE,
+		.muxregs = gpio1_4_to_7_muxreg,
+		.nmuxregs = ARRAY_SIZE(gpio1_4_to_7_muxreg),
+	},
+};
+
+static struct spear_pingroup gpio1_4_to_7_pingroup = {
+	.name = "gpio1_4_to_7_grp",
+	.pins = gpio1_4_to_7_pins,
+	.npins = ARRAY_SIZE(gpio1_4_to_7_pins),
+	.modemuxs = gpio1_4_to_7_modemux,
+	.nmodemuxs = ARRAY_SIZE(gpio1_4_to_7_modemux),
+};
+
+static const char *const gpio1_grps[] = { "gpio1_0_to_3_grp", "gpio1_4_to_7_grp"
+};
+static struct spear_function gpio1_function = {
+	.name = "gpio1",
+	.groups = gpio1_grps,
+	.ngroups = ARRAY_SIZE(gpio1_grps),
+};
+
+/* pingroups */
+static struct spear_pingroup *spear300_pingroups[] = {
+	SPEAR3XX_COMMON_PINGROUPS,
+	&fsmc_2chips_pingroup,
+	&fsmc_4chips_pingroup,
+	&clcd_lcdmode_pingroup,
+	&clcd_pfmode_pingroup,
+	&tdm_pingroup,
+	&i2c_clk_pingroup,
+	&caml_pingroup,
+	&camu_pingroup,
+	&dac_pingroup,
+	&i2s_pingroup,
+	&sdhci_4bit_pingroup,
+	&sdhci_8bit_pingroup,
+	&gpio1_0_to_3_pingroup,
+	&gpio1_4_to_7_pingroup,
+};
+
+/* functions */
+static struct spear_function *spear300_functions[] = {
+	SPEAR3XX_COMMON_FUNCTIONS,
+	&fsmc_function,
+	&clcd_function,
+	&tdm_function,
+	&i2c_function,
+	&cam_function,
+	&dac_function,
+	&i2s_function,
+	&sdhci_function,
+	&gpio1_function,
+};
+
+static const struct of_device_id spear300_pinctrl_of_match[] = {
+	{
+		.compatible = "st,spear300-pinmux",
+	},
+	{},
+};
+
+static int spear300_pinctrl_probe(struct platform_device *pdev)
+{
+	spear3xx_machdata.groups = spear300_pingroups;
+	spear3xx_machdata.ngroups = ARRAY_SIZE(spear300_pingroups);
+	spear3xx_machdata.functions = spear300_functions;
+	spear3xx_machdata.nfunctions = ARRAY_SIZE(spear300_functions);
+	spear3xx_machdata.gpio_pingroups = NULL;
+	spear3xx_machdata.ngpio_pingroups = 0;
+
+	spear3xx_machdata.modes_supported = true;
+	spear3xx_machdata.pmx_modes = spear300_pmx_modes;
+	spear3xx_machdata.npmx_modes = ARRAY_SIZE(spear300_pmx_modes);
+
+	pmx_init_addr(&spear3xx_machdata, PMX_CONFIG_REG);
+
+	return spear_pinctrl_probe(pdev, &spear3xx_machdata);
+}
+
+static struct platform_driver spear300_pinctrl_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = spear300_pinctrl_of_match,
+	},
+	.probe = spear300_pinctrl_probe,
+};
+
+static int __init spear300_pinctrl_init(void)
+{
+	return platform_driver_register(&spear300_pinctrl_driver);
+}
+arch_initcall(spear300_pinctrl_init);