Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 169 insertions, 0 deletions

diff --git a/drivers/platform/mips/rs780e-acpi.c b/drivers/platform/mips/rs780e-acpi.c
new file mode 100644
index 000000000..bb0e8ae0e
--- /dev/null
+++ b/drivers/platform/mips/rs780e-acpi.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static unsigned long acpi_iobase;
+
+#define ACPI_PM_EVT_BLK         (acpi_iobase + 0x00) /* 4 bytes */
+#define ACPI_PM_CNT_BLK         (acpi_iobase + 0x04) /* 2 bytes */
+#define ACPI_PMA_CNT_BLK        (acpi_iobase + 0x0F) /* 1 byte */
+#define ACPI_PM_TMR_BLK         (acpi_iobase + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK           (acpi_iobase + 0x10) /* 8 bytes */
+#define ACPI_END                (acpi_iobase + 0x80)
+
+#define PM_INDEX        0xCD6
+#define PM_DATA         0xCD7
+#define PM2_INDEX       0xCD0
+#define PM2_DATA        0xCD1
+
+static void pmio_write_index(u16 index, u8 reg, u8 value)
+{
+	outb(reg, index);
+	outb(value, index + 1);
+}
+
+static u8 pmio_read_index(u16 index, u8 reg)
+{
+	outb(reg, index);
+	return inb(index + 1);
+}
+
+void pm_iowrite(u8 reg, u8 value)
+{
+	pmio_write_index(PM_INDEX, reg, value);
+}
+EXPORT_SYMBOL(pm_iowrite);
+
+u8 pm_ioread(u8 reg)
+{
+	return pmio_read_index(PM_INDEX, reg);
+}
+EXPORT_SYMBOL(pm_ioread);
+
+void pm2_iowrite(u8 reg, u8 value)
+{
+	pmio_write_index(PM2_INDEX, reg, value);
+}
+EXPORT_SYMBOL(pm2_iowrite);
+
+u8 pm2_ioread(u8 reg)
+{
+	return pmio_read_index(PM2_INDEX, reg);
+}
+EXPORT_SYMBOL(pm2_ioread);
+
+static void acpi_hw_clear_status(void)
+{
+	u16 value;
+
+	/* PMStatus: Clear WakeStatus/PwrBtnStatus */
+	value = inw(ACPI_PM_EVT_BLK);
+	value |= (1 << 8 | 1 << 15);
+	outw(value, ACPI_PM_EVT_BLK);
+
+	/* GPEStatus: Clear all generated events */
+	outl(inl(ACPI_GPE0_BLK), ACPI_GPE0_BLK);
+}
+
+static void acpi_registers_setup(void)
+{
+	u32 value;
+
+	/* PM Status Base */
+	pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xff);
+	pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8);
+
+	/* PM Control Base */
+	pm_iowrite(0x22, ACPI_PM_CNT_BLK & 0xff);
+	pm_iowrite(0x23, ACPI_PM_CNT_BLK >> 8);
+
+	/* GPM Base */
+	pm_iowrite(0x28, ACPI_GPE0_BLK & 0xff);
+	pm_iowrite(0x29, ACPI_GPE0_BLK >> 8);
+
+	/* ACPI End */
+	pm_iowrite(0x2e, ACPI_END & 0xff);
+	pm_iowrite(0x2f, ACPI_END >> 8);
+
+	/* IO Decode: When AcpiDecodeEnable set, South-Bridge uses the contents
+	 * of the PM registers at index 0x20~0x2B to decode ACPI I/O address. */
+	pm_iowrite(0x0e, 1 << 3);
+
+	/* SCI_EN set */
+	outw(1, ACPI_PM_CNT_BLK);
+
+	/* Enable to generate SCI */
+	pm_iowrite(0x10, pm_ioread(0x10) | 1);
+
+	/* GPM3/GPM9 enable */
+	value = inl(ACPI_GPE0_BLK + 4);
+	outl(value | (1 << 14) | (1 << 22), ACPI_GPE0_BLK + 4);
+
+	/* Set GPM9 as input */
+	pm_iowrite(0x8d, pm_ioread(0x8d) & (~(1 << 1)));
+
+	/* Set GPM9 as non-output */
+	pm_iowrite(0x94, pm_ioread(0x94) | (1 << 3));
+
+	/* GPM3 config ACPI trigger SCIOUT */
+	pm_iowrite(0x33, pm_ioread(0x33) & (~(3 << 4)));
+
+	/* GPM9 config ACPI trigger SCIOUT */
+	pm_iowrite(0x3d, pm_ioread(0x3d) & (~(3 << 2)));
+
+	/* GPM3 config falling edge trigger */
+	pm_iowrite(0x37, pm_ioread(0x37) & (~(1 << 6)));
+
+	/* No wait for STPGNT# in ACPI Sx state */
+	pm_iowrite(0x7c, pm_ioread(0x7c) | (1 << 6));
+
+	/* Set GPM3 pull-down enable */
+	value = pm2_ioread(0xf6);
+	value |= ((1 << 7) | (1 << 3));
+	pm2_iowrite(0xf6, value);
+
+	/* Set GPM9 pull-down enable */
+	value = pm2_ioread(0xf8);
+	value |= ((1 << 5) | (1 << 1));
+	pm2_iowrite(0xf8, value);
+}
+
+static int rs780e_acpi_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res)
+		return -ENODEV;
+
+	/* SCI interrupt need acpi space, allocate here */
+	if (!request_region(res->start, resource_size(res), "acpi")) {
+		pr_err("RS780E-ACPI: Failed to request IO Region\n");
+		return -EBUSY;
+	}
+
+	acpi_iobase = res->start;
+
+	acpi_registers_setup();
+	acpi_hw_clear_status();
+
+	return 0;
+}
+
+static const struct of_device_id rs780e_acpi_match[] = {
+	{ .compatible = "loongson,rs780e-acpi" },
+	{},
+};
+
+static struct platform_driver rs780e_acpi_driver = {
+	.probe = rs780e_acpi_probe,
+	.driver = {
+		.name = "RS780E-ACPI",
+		.of_match_table = rs780e_acpi_match,
+	},
+};
+builtin_platform_driver(rs780e_acpi_driver);