Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 411 insertions, 0 deletions

diff --git a/drivers/platform/x86/intel/vbtn.c b/drivers/platform/x86/intel/vbtn.c
new file mode 100644
index 000000000..c5e4e35c8
--- /dev/null
+++ b/drivers/platform/x86/intel/vbtn.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Intel Virtual Button driver for Windows 8.1+
+ *
+ *  Copyright (C) 2016 AceLan Kao <acelan.kao@canonical.com>
+ *  Copyright (C) 2016 Alex Hung <alex.hung@canonical.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include "../dual_accel_detect.h"
+
+/* Returned when NOT in tablet mode on some HP Stream x360 11 models */
+#define VGBS_TABLET_MODE_FLAG_ALT	0x10
+/* When NOT in tablet mode, VGBS returns with the flag 0x40 */
+#define VGBS_TABLET_MODE_FLAG		0x40
+#define VGBS_DOCK_MODE_FLAG		0x80
+
+#define VGBS_TABLET_MODE_FLAGS (VGBS_TABLET_MODE_FLAG | VGBS_TABLET_MODE_FLAG_ALT)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("AceLan Kao");
+
+static const struct acpi_device_id intel_vbtn_ids[] = {
+	{"INT33D6", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, intel_vbtn_ids);
+
+/* In theory, these are HID usages. */
+static const struct key_entry intel_vbtn_keymap[] = {
+	{ KE_KEY, 0xC0, { KEY_POWER } },	/* power key press */
+	{ KE_IGNORE, 0xC1, { KEY_POWER } },	/* power key release */
+	{ KE_KEY, 0xC2, { KEY_LEFTMETA } },		/* 'Windows' key press */
+	{ KE_KEY, 0xC3, { KEY_LEFTMETA } },		/* 'Windows' key release */
+	{ KE_KEY, 0xC4, { KEY_VOLUMEUP } },		/* volume-up key press */
+	{ KE_IGNORE, 0xC5, { KEY_VOLUMEUP } },		/* volume-up key release */
+	{ KE_KEY, 0xC6, { KEY_VOLUMEDOWN } },		/* volume-down key press */
+	{ KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } },	/* volume-down key release */
+	{ KE_KEY,    0xC8, { KEY_ROTATE_LOCK_TOGGLE } },	/* rotate-lock key press */
+	{ KE_KEY,    0xC9, { KEY_ROTATE_LOCK_TOGGLE } },	/* rotate-lock key release */
+	{ KE_END }
+};
+
+static const struct key_entry intel_vbtn_switchmap[] = {
+	/*
+	 * SW_DOCK should only be reported for docking stations, but DSDTs using the
+	 * intel-vbtn code, always seem to use this for 2-in-1s / convertibles and set
+	 * SW_DOCK=1 when in laptop-mode (in tandem with setting SW_TABLET_MODE=0).
+	 * This causes userspace to think the laptop is docked to a port-replicator
+	 * and to disable suspend-on-lid-close, which is undesirable.
+	 * Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting.
+	 */
+	{ KE_IGNORE, 0xCA, { .sw = { SW_DOCK, 1 } } },		/* Docked */
+	{ KE_IGNORE, 0xCB, { .sw = { SW_DOCK, 0 } } },		/* Undocked */
+	{ KE_SW,     0xCC, { .sw = { SW_TABLET_MODE, 1 } } },	/* Tablet */
+	{ KE_SW,     0xCD, { .sw = { SW_TABLET_MODE, 0 } } },	/* Laptop */
+	{ KE_END }
+};
+
+struct intel_vbtn_priv {
+	struct input_dev *buttons_dev;
+	struct input_dev *switches_dev;
+	bool dual_accel;
+	bool has_buttons;
+	bool has_switches;
+	bool wakeup_mode;
+};
+
+static void detect_tablet_mode(struct platform_device *device)
+{
+	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
+	acpi_handle handle = ACPI_HANDLE(&device->dev);
+	unsigned long long vgbs;
+	acpi_status status;
+	int m;
+
+	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
+	if (ACPI_FAILURE(status))
+		return;
+
+	m = !(vgbs & VGBS_TABLET_MODE_FLAGS);
+	input_report_switch(priv->switches_dev, SW_TABLET_MODE, m);
+	m = (vgbs & VGBS_DOCK_MODE_FLAG) ? 1 : 0;
+	input_report_switch(priv->switches_dev, SW_DOCK, m);
+}
+
+/*
+ * Note this unconditionally creates the 2 input_dev-s and sets up
+ * the sparse-keymaps. Only the registration is conditional on
+ * have_buttons / have_switches. This is done so that the notify
+ * handler can always call sparse_keymap_entry_from_scancode()
+ * on the input_dev-s do determine the event type.
+ */
+static int intel_vbtn_input_setup(struct platform_device *device)
+{
+	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
+	int ret;
+
+	priv->buttons_dev = devm_input_allocate_device(&device->dev);
+	if (!priv->buttons_dev)
+		return -ENOMEM;
+
+	ret = sparse_keymap_setup(priv->buttons_dev, intel_vbtn_keymap, NULL);
+	if (ret)
+		return ret;
+
+	priv->buttons_dev->dev.parent = &device->dev;
+	priv->buttons_dev->name = "Intel Virtual Buttons";
+	priv->buttons_dev->id.bustype = BUS_HOST;
+
+	if (priv->has_buttons) {
+		ret = input_register_device(priv->buttons_dev);
+		if (ret)
+			return ret;
+	}
+
+	priv->switches_dev = devm_input_allocate_device(&device->dev);
+	if (!priv->switches_dev)
+		return -ENOMEM;
+
+	ret = sparse_keymap_setup(priv->switches_dev, intel_vbtn_switchmap, NULL);
+	if (ret)
+		return ret;
+
+	priv->switches_dev->dev.parent = &device->dev;
+	priv->switches_dev->name = "Intel Virtual Switches";
+	priv->switches_dev->id.bustype = BUS_HOST;
+
+	if (priv->has_switches) {
+		detect_tablet_mode(device);
+
+		ret = input_register_device(priv->switches_dev);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void notify_handler(acpi_handle handle, u32 event, void *context)
+{
+	struct platform_device *device = context;
+	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
+	unsigned int val = !(event & 1); /* Even=press, Odd=release */
+	const struct key_entry *ke, *ke_rel;
+	struct input_dev *input_dev;
+	bool autorelease;
+	int ret;
+
+	if ((ke = sparse_keymap_entry_from_scancode(priv->buttons_dev, event))) {
+		if (!priv->has_buttons) {
+			dev_warn(&device->dev, "Warning: received a button event on a device without buttons, please report this.\n");
+			return;
+		}
+		input_dev = priv->buttons_dev;
+	} else if ((ke = sparse_keymap_entry_from_scancode(priv->switches_dev, event))) {
+		if (!priv->has_switches) {
+			/* See dual_accel_detect.h for more info */
+			if (priv->dual_accel)
+				return;
+
+			dev_info(&device->dev, "Registering Intel Virtual Switches input-dev after receiving a switch event\n");
+			ret = input_register_device(priv->switches_dev);
+			if (ret)
+				return;
+
+			priv->has_switches = true;
+		}
+		input_dev = priv->switches_dev;
+	} else {
+		dev_dbg(&device->dev, "unknown event index 0x%x\n", event);
+		return;
+	}
+
+	if (priv->wakeup_mode) {
+		pm_wakeup_hard_event(&device->dev);
+
+		/*
+		 * Skip reporting an evdev event for button wake events,
+		 * mirroring how the drivers/acpi/button.c code skips this too.
+		 */
+		if (ke->type == KE_KEY)
+			return;
+	}
+
+	/*
+	 * Even press events are autorelease if there is no corresponding odd
+	 * release event, or if the odd event is KE_IGNORE.
+	 */
+	ke_rel = sparse_keymap_entry_from_scancode(input_dev, event | 1);
+	autorelease = val && (!ke_rel || ke_rel->type == KE_IGNORE);
+
+	sparse_keymap_report_event(input_dev, event, val, autorelease);
+}
+
+/*
+ * There are several laptops (non 2-in-1) models out there which support VGBS,
+ * but simply always return 0, which we translate to SW_TABLET_MODE=1. This in
+ * turn causes userspace (libinput) to suppress events from the builtin
+ * keyboard and touchpad, making the laptop essentially unusable.
+ *
+ * Since the problem of wrongly reporting SW_TABLET_MODE=1 in combination
+ * with libinput, leads to a non-usable system. Where as OTOH many people will
+ * not even notice when SW_TABLET_MODE is not being reported, a DMI based allow
+ * list is used here. This list mainly matches on the chassis-type of 2-in-1s.
+ *
+ * There are also some 2-in-1s which use the intel-vbtn ACPI interface to report
+ * SW_TABLET_MODE with a chassis-type of 8 ("Portable") or 10 ("Notebook"),
+ * these are matched on a per model basis, since many normal laptops with a
+ * possible broken VGBS ACPI-method also use these chassis-types.
+ */
+static const struct dmi_system_id dmi_switches_allow_list[] = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "31" /* Convertible */),
+		},
+	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_CHASSIS_TYPE, "32" /* Detachable */),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Venue 11 Pro 7130"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion 13 x360 PC"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7352"),
+		},
+	},
+	{} /* Array terminator */
+};
+
+static bool intel_vbtn_has_switches(acpi_handle handle, bool dual_accel)
+{
+	unsigned long long vgbs;
+	acpi_status status;
+
+	/* See dual_accel_detect.h for more info */
+	if (dual_accel)
+		return false;
+
+	if (!dmi_check_system(dmi_switches_allow_list))
+		return false;
+
+	status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs);
+	return ACPI_SUCCESS(status);
+}
+
+static int intel_vbtn_probe(struct platform_device *device)
+{
+	acpi_handle handle = ACPI_HANDLE(&device->dev);
+	bool dual_accel, has_buttons, has_switches;
+	struct intel_vbtn_priv *priv;
+	acpi_status status;
+	int err;
+
+	dual_accel = dual_accel_detect();
+	has_buttons = acpi_has_method(handle, "VBDL");
+	has_switches = intel_vbtn_has_switches(handle, dual_accel);
+
+	if (!has_buttons && !has_switches) {
+		dev_warn(&device->dev, "failed to read Intel Virtual Button driver\n");
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	dev_set_drvdata(&device->dev, priv);
+
+	priv->dual_accel = dual_accel;
+	priv->has_buttons = has_buttons;
+	priv->has_switches = has_switches;
+
+	err = intel_vbtn_input_setup(device);
+	if (err) {
+		pr_err("Failed to setup Intel Virtual Button\n");
+		return err;
+	}
+
+	status = acpi_install_notify_handler(handle,
+					     ACPI_DEVICE_NOTIFY,
+					     notify_handler,
+					     device);
+	if (ACPI_FAILURE(status))
+		return -EBUSY;
+
+	if (has_buttons) {
+		status = acpi_evaluate_object(handle, "VBDL", NULL, NULL);
+		if (ACPI_FAILURE(status))
+			dev_err(&device->dev, "Error VBDL failed with ACPI status %d\n", status);
+	}
+
+	device_init_wakeup(&device->dev, true);
+	/*
+	 * In order for system wakeup to work, the EC GPE has to be marked as
+	 * a wakeup one, so do that here (this setting will persist, but it has
+	 * no effect until the wakeup mask is set for the EC GPE).
+	 */
+	acpi_ec_mark_gpe_for_wake();
+	return 0;
+}
+
+static int intel_vbtn_remove(struct platform_device *device)
+{
+	acpi_handle handle = ACPI_HANDLE(&device->dev);
+
+	device_init_wakeup(&device->dev, false);
+	acpi_remove_notify_handler(handle, ACPI_DEVICE_NOTIFY, notify_handler);
+
+	/*
+	 * Even if we failed to shut off the event stream, we can still
+	 * safely detach from the device.
+	 */
+	return 0;
+}
+
+static int intel_vbtn_pm_prepare(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		struct intel_vbtn_priv *priv = dev_get_drvdata(dev);
+
+		priv->wakeup_mode = true;
+	}
+	return 0;
+}
+
+static void intel_vbtn_pm_complete(struct device *dev)
+{
+	struct intel_vbtn_priv *priv = dev_get_drvdata(dev);
+
+	priv->wakeup_mode = false;
+}
+
+static int intel_vbtn_pm_resume(struct device *dev)
+{
+	intel_vbtn_pm_complete(dev);
+	return 0;
+}
+
+static const struct dev_pm_ops intel_vbtn_pm_ops = {
+	.prepare = intel_vbtn_pm_prepare,
+	.complete = intel_vbtn_pm_complete,
+	.resume = intel_vbtn_pm_resume,
+	.restore = intel_vbtn_pm_resume,
+	.thaw = intel_vbtn_pm_resume,
+};
+
+static struct platform_driver intel_vbtn_pl_driver = {
+	.driver = {
+		.name = "intel-vbtn",
+		.acpi_match_table = intel_vbtn_ids,
+		.pm = &intel_vbtn_pm_ops,
+	},
+	.probe = intel_vbtn_probe,
+	.remove = intel_vbtn_remove,
+};
+
+static acpi_status __init
+check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	const struct acpi_device_id *ids = context;
+	struct acpi_device *dev = acpi_fetch_acpi_dev(handle);
+
+	if (dev && acpi_match_device_ids(dev, ids) == 0)
+		if (!IS_ERR_OR_NULL(acpi_create_platform_device(dev, NULL)))
+			dev_info(&dev->dev,
+				 "intel-vbtn: created platform device\n");
+
+	return AE_OK;
+}
+
+static int __init intel_vbtn_init(void)
+{
+	acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+			    ACPI_UINT32_MAX, check_acpi_dev, NULL,
+			    (void *)intel_vbtn_ids, NULL);
+
+	return platform_driver_register(&intel_vbtn_pl_driver);
+}
+module_init(intel_vbtn_init);
+
+static void __exit intel_vbtn_exit(void)
+{
+	platform_driver_unregister(&intel_vbtn_pl_driver);
+}
+module_exit(intel_vbtn_exit);