Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1738 insertions, 0 deletions

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
new file mode 100644
index 000000000..13802a3c3
--- /dev/null
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -0,0 +1,1738 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Touchscreen driver DMI based configuration code
+ *
+ * Copyright (c) 2017 Red Hat Inc.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/efi_embedded_fw.h>
+#include <linux/i2c.h>
+#include <linux/notifier.h>
+#include <linux/property.h>
+#include <linux/string.h>
+
+struct ts_dmi_data {
+	/* The EFI embedded-fw code expects this to be the first member! */
+	struct efi_embedded_fw_desc embedded_fw;
+	const char *acpi_name;
+	const struct property_entry *properties;
+};
+
+/* NOTE: Please keep all entries sorted alphabetically */
+
+static const struct property_entry chuwi_hi8_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1665),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi8.fw"),
+	{ }
+};
+
+static const struct ts_dmi_data chuwi_hi8_data = {
+	.acpi_name      = "MSSL0001:00",
+	.properties     = chuwi_hi8_props,
+};
+
+static const struct property_entry chuwi_hi8_air_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1728),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1148),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-chuwi-hi8-air.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data chuwi_hi8_air_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= chuwi_hi8_air_props,
+};
+
+static const struct property_entry chuwi_hi8_pro_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 6),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 3),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1728),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1148),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-chuwi-hi8-pro.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data chuwi_hi8_pro_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl3680-chuwi-hi8-pro.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 39864,
+		.sha256	= { 0xc0, 0x88, 0xc5, 0xef, 0xd1, 0x70, 0x77, 0x59,
+			    0x4e, 0xe9, 0xc4, 0xd8, 0x2e, 0xcd, 0xbf, 0x95,
+			    0x32, 0xd9, 0x03, 0x28, 0x0d, 0x48, 0x9f, 0x92,
+			    0x35, 0x37, 0xf6, 0x8b, 0x2a, 0xe4, 0x73, 0xff },
+	},
+	.acpi_name	= "MSSL1680:00",
+	.properties	= chuwi_hi8_pro_props,
+};
+
+static const struct property_entry chuwi_hi10_air_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1981),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1271),
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 99),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 9),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_U32("touchscreen-fuzz-x", 5),
+	PROPERTY_ENTRY_U32("touchscreen-fuzz-y", 4),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10-air.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data chuwi_hi10_air_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= chuwi_hi10_air_props,
+};
+
+static const struct property_entry chuwi_hi10_plus_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 12),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 10),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1908),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1270),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10plus.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	PROPERTY_ENTRY_BOOL("silead,pen-supported"),
+	PROPERTY_ENTRY_U32("silead,pen-resolution-x", 8),
+	PROPERTY_ENTRY_U32("silead,pen-resolution-y", 8),
+	{ }
+};
+
+static const struct ts_dmi_data chuwi_hi10_plus_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl1680-chuwi-hi10plus.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 34056,
+		.sha256	= { 0xfd, 0x0a, 0x08, 0x08, 0x3c, 0xa6, 0x34, 0x4e,
+			    0x2c, 0x49, 0x9c, 0xcd, 0x7d, 0x44, 0x9d, 0x38,
+			    0x10, 0x68, 0xb5, 0xbd, 0xb7, 0x2a, 0x63, 0xb5,
+			    0x67, 0x0b, 0x96, 0xbd, 0x89, 0x67, 0x85, 0x09 },
+	},
+	.acpi_name      = "MSSL0017:00",
+	.properties     = chuwi_hi10_plus_props,
+};
+
+static const u32 chuwi_hi10_pro_efi_min_max[] = { 8, 1911, 8, 1271 };
+
+static const struct property_entry chuwi_hi10_pro_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 80),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 26),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1962),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1254),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hi10-pro.fw"),
+	PROPERTY_ENTRY_U32_ARRAY("silead,efi-fw-min-max", chuwi_hi10_pro_efi_min_max),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	PROPERTY_ENTRY_BOOL("silead,pen-supported"),
+	PROPERTY_ENTRY_U32("silead,pen-resolution-x", 8),
+	PROPERTY_ENTRY_U32("silead,pen-resolution-y", 8),
+	{ }
+};
+
+static const struct ts_dmi_data chuwi_hi10_pro_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl1680-chuwi-hi10-pro.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 42504,
+		.sha256	= { 0xdb, 0x92, 0x68, 0xa8, 0xdb, 0x81, 0x31, 0x00,
+			    0x1f, 0x58, 0x89, 0xdb, 0x19, 0x1b, 0x15, 0x8c,
+			    0x05, 0x14, 0xf4, 0x95, 0xba, 0x15, 0x45, 0x98,
+			    0x42, 0xa3, 0xbb, 0x65, 0xe3, 0x30, 0xa5, 0x93 },
+	},
+	.acpi_name      = "MSSL1680:00",
+	.properties     = chuwi_hi10_pro_props,
+};
+
+static const struct property_entry chuwi_hibook_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 30),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 4),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1892),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1276),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-hibook.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data chuwi_hibook_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl1680-chuwi-hibook.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 40392,
+		.sha256	= { 0xf7, 0xc0, 0xe8, 0x5a, 0x6c, 0xf2, 0xeb, 0x8d,
+			    0x12, 0xc4, 0x45, 0xbf, 0x55, 0x13, 0x4c, 0x1a,
+			    0x13, 0x04, 0x31, 0x08, 0x65, 0x73, 0xf7, 0xa8,
+			    0x1b, 0x7d, 0x59, 0xc9, 0xe6, 0x97, 0xf7, 0x38 },
+	},
+	.acpi_name      = "MSSL0017:00",
+	.properties     = chuwi_hibook_props,
+};
+
+static const struct property_entry chuwi_vi8_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 4),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 6),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1724),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-chuwi-vi8.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data chuwi_vi8_data = {
+	.acpi_name      = "MSSL1680:00",
+	.properties     = chuwi_vi8_props,
+};
+
+static const struct ts_dmi_data chuwi_vi8_plus_data = {
+	.embedded_fw = {
+		.name	= "chipone/icn8505-HAMP0002.fw",
+		.prefix = { 0xb0, 0x07, 0x00, 0x00, 0xe4, 0x07, 0x00, 0x00 },
+		.length	= 35012,
+		.sha256	= { 0x93, 0xe5, 0x49, 0xe0, 0xb6, 0xa2, 0xb4, 0xb3,
+			    0x88, 0x96, 0x34, 0x97, 0x5e, 0xa8, 0x13, 0x78,
+			    0x72, 0x98, 0xb8, 0x29, 0xeb, 0x5c, 0xa7, 0xf1,
+			    0x25, 0x13, 0x43, 0xf4, 0x30, 0x7c, 0xfc, 0x7c },
+	},
+};
+
+static const struct property_entry chuwi_vi10_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 0),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 4),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1858),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1280),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-chuwi-vi10.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data chuwi_vi10_data = {
+	.acpi_name      = "MSSL0002:00",
+	.properties     = chuwi_vi10_props,
+};
+
+static const struct property_entry chuwi_surbook_mini_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 88),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 13),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 2040),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1524),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-chuwi-surbook-mini.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	{ }
+};
+
+static const struct ts_dmi_data chuwi_surbook_mini_data = {
+	.acpi_name      = "MSSL1680:00",
+	.properties     = chuwi_surbook_mini_props,
+};
+
+static const struct property_entry connect_tablet9_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 9),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 10),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1664),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 880),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-connect-tablet9.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data connect_tablet9_data = {
+	.acpi_name      = "MSSL1680:00",
+	.properties     = connect_tablet9_props,
+};
+
+static const struct property_entry csl_panther_tab_hd_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 20),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1526),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-csl-panther-tab-hd.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data csl_panther_tab_hd_data = {
+	.acpi_name      = "MSSL1680:00",
+	.properties     = csl_panther_tab_hd_props,
+};
+
+static const struct property_entry cube_iwork8_air_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 3),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1664),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 896),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-cube-iwork8-air.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data cube_iwork8_air_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl3670-cube-iwork8-air.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 38808,
+		.sha256	= { 0xff, 0x62, 0x2d, 0xd1, 0x8a, 0x78, 0x04, 0x7b,
+			    0x33, 0x06, 0xb0, 0x4f, 0x7f, 0x02, 0x08, 0x9c,
+			    0x96, 0xd4, 0x9f, 0x04, 0xe1, 0x47, 0x25, 0x25,
+			    0x60, 0x77, 0x41, 0x33, 0xeb, 0x12, 0x82, 0xfc },
+	},
+	.acpi_name	= "MSSL1680:00",
+	.properties	= cube_iwork8_air_props,
+};
+
+static const struct property_entry cube_knote_i1101_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 20),
+	PROPERTY_ENTRY_U32("touchscreen-min-y",  22),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1961),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1513),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-cube-knote-i1101.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data cube_knote_i1101_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= cube_knote_i1101_props,
+};
+
+static const struct property_entry dexp_ursus_7w_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 890),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 630),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-dexp-ursus-7w.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data dexp_ursus_7w_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= dexp_ursus_7w_props,
+};
+
+static const struct property_entry digma_citi_e200_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1500),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-digma_citi_e200.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data digma_citi_e200_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= digma_citi_e200_props,
+};
+
+static const struct property_entry estar_beauty_hd_props[] = {
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	{ }
+};
+
+static const struct ts_dmi_data estar_beauty_hd_data = {
+	.acpi_name	= "GDIX1001:00",
+	.properties	= estar_beauty_hd_props,
+};
+
+/* Generic props + data for upside-down mounted GDIX1001 touchscreens */
+static const struct property_entry gdix1001_upside_down_props[] = {
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	{ }
+};
+
+static const struct ts_dmi_data gdix1001_00_upside_down_data = {
+	.acpi_name	= "GDIX1001:00",
+	.properties	= gdix1001_upside_down_props,
+};
+
+static const struct ts_dmi_data gdix1001_01_upside_down_data = {
+	.acpi_name	= "GDIX1001:01",
+	.properties	= gdix1001_upside_down_props,
+};
+
+static const struct property_entry gp_electronic_t701_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 960),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 640),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-gp-electronic-t701.fw"),
+	{ }
+};
+
+static const struct ts_dmi_data gp_electronic_t701_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= gp_electronic_t701_props,
+};
+
+static const struct property_entry irbis_tw90_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1720),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1138),
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 8),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 14),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-irbis_tw90.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data irbis_tw90_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= irbis_tw90_props,
+};
+
+static const struct property_entry irbis_tw118_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 20),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 30),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1960),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1510),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-irbis-tw118.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data irbis_tw118_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= irbis_tw118_props,
+};
+
+static const struct property_entry itworks_tw891_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 5),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1600),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 896),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-itworks-tw891.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data itworks_tw891_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= itworks_tw891_props,
+};
+
+static const struct property_entry jumper_ezpad_6_pro_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1500),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-pro.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data jumper_ezpad_6_pro_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= jumper_ezpad_6_pro_props,
+};
+
+static const struct property_entry jumper_ezpad_6_pro_b_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1500),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-pro-b.fw"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data jumper_ezpad_6_pro_b_data = {
+	.acpi_name      = "MSSL1680:00",
+	.properties     = jumper_ezpad_6_pro_b_props,
+};
+
+static const struct property_entry jumper_ezpad_6_m4_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 35),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 15),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1950),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1525),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-m4.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data jumper_ezpad_6_m4_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= jumper_ezpad_6_m4_props,
+};
+
+static const struct property_entry jumper_ezpad_7_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 4),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 10),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 2044),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1526),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-jumper-ezpad-7.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,stuck-controller-bug"),
+	{ }
+};
+
+static const struct ts_dmi_data jumper_ezpad_7_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= jumper_ezpad_7_props,
+};
+
+static const struct property_entry jumper_ezpad_mini3_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 23),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 16),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1700),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1138),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-jumper-ezpad-mini3.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data jumper_ezpad_mini3_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= jumper_ezpad_mini3_props,
+};
+
+static const struct property_entry mpman_converter9_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 8),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 8),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1664),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 880),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-mpman-converter9.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data mpman_converter9_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= mpman_converter9_props,
+};
+
+static const struct property_entry mpman_mpwin895cl_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 3),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 9),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1728),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1150),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-mpman-mpwin895cl.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data mpman_mpwin895cl_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= mpman_mpwin895cl_props,
+};
+
+static const struct property_entry myria_my8307_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1720),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-myria-my8307.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data myria_my8307_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= myria_my8307_props,
+};
+
+static const struct property_entry onda_obook_20_plus_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1728),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1148),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-obook-20-plus.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data onda_obook_20_plus_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= onda_obook_20_plus_props,
+};
+
+static const struct property_entry onda_v80_plus_v3_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 22),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 15),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1698),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-v80-plus-v3.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data onda_v80_plus_v3_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl3676-onda-v80-plus-v3.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 37224,
+		.sha256	= { 0x8f, 0xbd, 0x8f, 0x0c, 0x6b, 0xba, 0x5b, 0xf5,
+			    0xa3, 0xc7, 0xa3, 0xc0, 0x4f, 0xcd, 0xdf, 0x32,
+			    0xcc, 0xe4, 0x70, 0xd6, 0x46, 0x9c, 0xd7, 0xa7,
+			    0x4b, 0x82, 0x3f, 0xab, 0xc7, 0x90, 0xea, 0x23 },
+	},
+	.acpi_name	= "MSSL1680:00",
+	.properties	= onda_v80_plus_v3_props,
+};
+
+static const struct property_entry onda_v820w_32g_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1665),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-onda-v820w-32g.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data onda_v820w_32g_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= onda_v820w_32g_props,
+};
+
+static const struct property_entry onda_v891_v5_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1715),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name",
+			      "gsl3676-onda-v891-v5.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data onda_v891_v5_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= onda_v891_v5_props,
+};
+
+static const struct property_entry onda_v891w_v1_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 46),
+	PROPERTY_ENTRY_U32("touchscreen-min-y",  8),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1676),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1130),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-onda-v891w-v1.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data onda_v891w_v1_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= onda_v891w_v1_props,
+};
+
+static const struct property_entry onda_v891w_v3_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 35),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 15),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1625),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1135),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3676-onda-v891w-v3.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data onda_v891w_v3_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= onda_v891w_v3_props,
+};
+
+static const struct property_entry pipo_w2s_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1660),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 880),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-pipo-w2s.fw"),
+	{ }
+};
+
+static const struct ts_dmi_data pipo_w2s_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl1680-pipo-w2s.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 39072,
+		.sha256	= { 0xd0, 0x58, 0xc4, 0x7d, 0x55, 0x2d, 0x62, 0x18,
+			    0xd1, 0x6a, 0x71, 0x73, 0x0b, 0x3f, 0xbe, 0x60,
+			    0xbb, 0x45, 0x8c, 0x52, 0x27, 0xb7, 0x18, 0xf4,
+			    0x31, 0x00, 0x6a, 0x49, 0x76, 0xd8, 0x7c, 0xd3 },
+	},
+	.acpi_name	= "MSSL1680:00",
+	.properties	= pipo_w2s_props,
+};
+
+static const struct property_entry pipo_w11_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 15),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1984),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1532),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-pipo-w11.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data pipo_w11_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= pipo_w11_props,
+};
+
+static const struct property_entry pov_mobii_wintab_p800w_v20_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 32),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 16),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1692),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1146),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-pov-mobii-wintab-p800w-v20.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data pov_mobii_wintab_p800w_v20_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= pov_mobii_wintab_p800w_v20_props,
+};
+
+static const struct property_entry pov_mobii_wintab_p800w_v21_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 8),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1794),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1148),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-pov-mobii-wintab-p800w.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data pov_mobii_wintab_p800w_v21_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= pov_mobii_wintab_p800w_v21_props,
+};
+
+static const struct property_entry pov_mobii_wintab_p1006w_v10_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 1),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 3),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1984),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1520),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-pov-mobii-wintab-p1006w-v10.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data pov_mobii_wintab_p1006w_v10_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= pov_mobii_wintab_p1006w_v10_props,
+};
+
+static const struct property_entry predia_basic_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 3),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 10),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1728),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1144),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-predia-basic.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data predia_basic_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= predia_basic_props,
+};
+
+static const struct property_entry rca_cambio_w101_v2_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 4),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 20),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1644),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 874),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-rca-cambio-w101-v2.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data rca_cambio_w101_v2_data = {
+	.acpi_name = "MSSL1680:00",
+	.properties = rca_cambio_w101_v2_props,
+};
+
+static const struct property_entry rwc_nanote_p8_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 46),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1728),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-rwc-nanote-p8.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data rwc_nanote_p8_data = {
+	.acpi_name = "MSSL1680:00",
+	.properties = rwc_nanote_p8_props,
+};
+
+static const struct property_entry schneider_sct101ctm_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1715),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-schneider-sct101ctm.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data schneider_sct101ctm_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= schneider_sct101ctm_props,
+};
+
+static const struct property_entry techbite_arc_11_6_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 5),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 7),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1981),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1270),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-techbite-arc-11-6.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data techbite_arc_11_6_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= techbite_arc_11_6_props,
+};
+
+static const struct property_entry teclast_tbook11_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 8),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 14),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1916),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1264),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-teclast-tbook11.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data teclast_tbook11_data = {
+	.embedded_fw = {
+		.name	= "silead/gsl3692-teclast-tbook11.fw",
+		.prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 },
+		.length	= 43560,
+		.sha256	= { 0x9d, 0xb0, 0x3d, 0xf1, 0x00, 0x3c, 0xb5, 0x25,
+			    0x62, 0x8a, 0xa0, 0x93, 0x4b, 0xe0, 0x4e, 0x75,
+			    0xd1, 0x27, 0xb1, 0x65, 0x3c, 0xba, 0xa5, 0x0f,
+			    0xcd, 0xb4, 0xbe, 0x00, 0xbb, 0xf6, 0x43, 0x29 },
+	},
+	.acpi_name	= "MSSL1680:00",
+	.properties	= teclast_tbook11_props,
+};
+
+static const struct property_entry teclast_x3_plus_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1500),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-teclast-x3-plus.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data teclast_x3_plus_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= teclast_x3_plus_props,
+};
+
+static const struct property_entry teclast_x98plus2_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 2048),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1280),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-teclast_x98plus2.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	{ }
+};
+
+static const struct ts_dmi_data teclast_x98plus2_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= teclast_x98plus2_props,
+};
+
+static const struct property_entry trekstor_primebook_c11_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1970),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1530),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primebook-c11.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data trekstor_primebook_c11_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= trekstor_primebook_c11_props,
+};
+
+static const struct property_entry trekstor_primebook_c13_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 2624),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1920),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primebook-c13.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data trekstor_primebook_c13_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= trekstor_primebook_c13_props,
+};
+
+static const struct property_entry trekstor_primetab_t13b_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 2500),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1900),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-trekstor-primetab-t13b.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	{ }
+};
+
+static const struct ts_dmi_data trekstor_primetab_t13b_data = {
+	.acpi_name  = "MSSL1680:00",
+	.properties = trekstor_primetab_t13b_props,
+};
+
+static const struct property_entry trekstor_surftab_duo_w1_props[] = {
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	{ }
+};
+
+static const struct ts_dmi_data trekstor_surftab_duo_w1_data = {
+	.acpi_name	= "GDIX1001:00",
+	.properties	= trekstor_surftab_duo_w1_props,
+};
+
+static const struct property_entry trekstor_surftab_twin_10_1_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 20),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 0),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1890),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1280),
+	PROPERTY_ENTRY_U32("touchscreen-inverted-y", 1),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3670-surftab-twin-10-1-st10432-8.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data trekstor_surftab_twin_10_1_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= trekstor_surftab_twin_10_1_props,
+};
+
+static const struct property_entry trekstor_surftab_wintron70_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 12),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 8),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 884),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 632),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1686-surftab-wintron70-st70416-6.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data trekstor_surftab_wintron70_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= trekstor_surftab_wintron70_props,
+};
+
+static const struct property_entry viglen_connect_10_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1890),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1280),
+	PROPERTY_ENTRY_U32("touchscreen-fuzz-x", 6),
+	PROPERTY_ENTRY_U32("touchscreen-fuzz-y", 6),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-viglen-connect-10.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data viglen_connect_10_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= viglen_connect_10_props,
+};
+
+static const struct property_entry vinga_twizzle_j116_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1920),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1280),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-vinga-twizzle_j116.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data vinga_twizzle_j116_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= vinga_twizzle_j116_props,
+};
+
+/* NOTE: Please keep this table sorted alphabetically */
+const struct dmi_system_id touchscreen_dmi_table[] = {
+	{
+		/* Chuwi Hi8 */
+		.driver_data = (void *)&chuwi_hi8_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ilife"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "S806"),
+		},
+	},
+	{
+		/* Chuwi Hi8 (H1D_S806_206) */
+		.driver_data = (void *)&chuwi_hi8_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "BayTrail"),
+			DMI_MATCH(DMI_BIOS_VERSION, "H1D_S806_206"),
+		},
+	},
+	{
+		/* Chuwi Hi8 Air (CWI543) */
+		.driver_data = (void *)&chuwi_hi8_air_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Default string"),
+			DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Hi8 Air"),
+		},
+	},
+	{
+		/* Chuwi Hi8 Pro (CWI513) */
+		.driver_data = (void *)&chuwi_hi8_pro_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X1D3_C806N"),
+		},
+	},
+	{
+		/* Chuwi Hi10 Air */
+		.driver_data = (void *)&chuwi_hi10_air_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "CHUWI INNOVATION AND TECHNOLOGY(SHENZHEN)CO.LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+			DMI_MATCH(DMI_PRODUCT_SKU, "P1W6_C109D_B"),
+		},
+	},
+	{
+		/* Chuwi Hi10 Plus (CWI527) */
+		.driver_data = (void *)&chuwi_hi10_plus_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Hi10 plus tablet"),
+			DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+		},
+	},
+	{
+		/* Chuwi Hi10 Pro (CWI529) */
+		.driver_data = (void *)&chuwi_hi10_pro_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Hi10 pro tablet"),
+			DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+		},
+	},
+	{
+		/* Chuwi HiBook (CWI514) */
+		.driver_data = (void *)&chuwi_hibook_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
+			DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+			/* Above matches are too generic, add bios-date match */
+			DMI_MATCH(DMI_BIOS_DATE, "05/07/2016"),
+		},
+	},
+	{
+		/* Chuwi Vi8 (CWI501) */
+		.driver_data = (void *)&chuwi_vi8_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "i86"),
+			DMI_MATCH(DMI_BIOS_VERSION, "CHUWI.W86JLBNR01"),
+		},
+	},
+	{
+		/* Chuwi Vi8 (CWI506) */
+		.driver_data = (void *)&chuwi_vi8_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "i86"),
+			DMI_MATCH(DMI_BIOS_VERSION, "CHUWI.D86JLBNR"),
+		},
+	},
+	{
+		/* Chuwi Vi8 Plus (CWI519) */
+		.driver_data = (void *)&chuwi_vi8_plus_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"),
+			DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+		},
+	},
+	{
+		/* Chuwi Vi10 (CWI505) */
+		.driver_data = (void *)&chuwi_vi10_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
+			DMI_MATCH(DMI_BOARD_NAME, "BYT-PF02"),
+			DMI_MATCH(DMI_SYS_VENDOR, "ilife"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "S165"),
+		},
+	},
+	{
+		/* Chuwi Surbook Mini (CWI540) */
+		.driver_data = (void *)&chuwi_surbook_mini_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "C3W6_AP108_4G"),
+		},
+	},
+	{
+		/* Connect Tablet 9 */
+		.driver_data = (void *)&connect_tablet9_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Connect"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Tablet 9"),
+		},
+	},
+	{
+		/* CSL Panther Tab HD */
+		.driver_data = (void *)&csl_panther_tab_hd_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "CSL Computer GmbH & Co. KG"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CSL Panther Tab HD"),
+		},
+	},
+	{
+		/* CUBE iwork8 Air */
+		.driver_data = (void *)&cube_iwork8_air_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "cube"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "i1-TF"),
+			DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+		},
+	},
+	{
+		/* Cube KNote i1101 */
+		.driver_data = (void *)&cube_knote_i1101_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"),
+			DMI_MATCH(DMI_BOARD_NAME, "L1W6_I1101"),
+			DMI_MATCH(DMI_SYS_VENDOR, "ALLDOCUBE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "i1101"),
+		},
+	},
+	{
+		/* DEXP Ursus 7W */
+		.driver_data = (void *)&dexp_ursus_7w_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "7W"),
+		},
+	},
+	{
+		/* Digma Citi E200 */
+		.driver_data = (void *)&digma_citi_e200_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Digma"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CITI E200"),
+			DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+		},
+	},
+	{
+		/* Estar Beauty HD (MID 7316R) */
+		.driver_data = (void *)&estar_beauty_hd_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Estar"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "eSTAR BEAUTY HD Intel Quad core"),
+		},
+	},
+	{
+		/* GP-electronic T701 */
+		.driver_data = (void *)&gp_electronic_t701_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T701"),
+			DMI_MATCH(DMI_BIOS_VERSION, "BYT70A.YNCHENG.WIN.007"),
+		},
+	},
+	{
+		/* I.T.Works TW701 (same hardware as the Trekstor ST70416-6) */
+		.driver_data = (void *)&trekstor_surftab_wintron70_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "i71c"),
+			DMI_MATCH(DMI_BIOS_VERSION, "itWORKS.G.WI71C.JGBMRB"),
+		},
+	},
+	{
+		/* Irbis TW90 */
+		.driver_data = (void *)&irbis_tw90_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IRBIS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TW90"),
+		},
+	},
+	{
+		/* Irbis TW118 */
+		.driver_data = (void *)&irbis_tw118_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IRBIS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TW118"),
+		},
+	},
+	{
+		/* I.T.Works TW891 */
+		.driver_data = (void *)&itworks_tw891_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "To be filled by O.E.M."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TW891"),
+		},
+	},
+	{
+		/* Jumper EZpad 6 Pro */
+		.driver_data = (void *)&jumper_ezpad_6_pro_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			DMI_MATCH(DMI_BIOS_VERSION, "5.12"),
+			/* Above matches are too generic, add bios-date match */
+			DMI_MATCH(DMI_BIOS_DATE, "08/18/2017"),
+		},
+	},
+	{
+		/* Jumper EZpad 6 Pro B */
+		.driver_data = (void *)&jumper_ezpad_6_pro_b_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			DMI_MATCH(DMI_BIOS_VERSION, "5.12"),
+			/* Above matches are too generic, add bios-date match */
+			DMI_MATCH(DMI_BIOS_DATE, "04/24/2018"),
+		},
+	},
+	{
+		/* Jumper EZpad 6 m4 */
+		.driver_data = (void *)&jumper_ezpad_6_m4_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			/* Jumper8.S106x.A00C.1066 with the version dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Jumper8.S106x"),
+		},
+	},
+	{
+		/* Jumper EZpad 7 */
+		.driver_data = (void *)&jumper_ezpad_7_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			/* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"),
+		},
+	},
+	{
+		/* Jumper EZpad mini3 */
+		.driver_data = (void *)&jumper_ezpad_mini3_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			/* jumperx.T87.KFBNEEA02 with the version-nr dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "jumperx.T87.KFBNEEA"),
+		},
+	},
+	{
+		/* Mediacom WinPad 7.0 W700 (same hw as Wintron surftab 7") */
+		.driver_data = (void *)&trekstor_surftab_wintron70_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDIACOM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "WinPad 7 W10 - WPW700"),
+		},
+	},
+	{
+		/* Mediacom Flexbook Edge 11 (same hw as TS Primebook C11) */
+		.driver_data = (void *)&trekstor_primebook_c11_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MEDIACOM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "FlexBook edge11 - M-FBE11"),
+		},
+	},
+	{
+		/* MP Man Converter 9 */
+		.driver_data = (void *)&mpman_converter9_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MPMAN"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Converter9"),
+		},
+	},
+	{
+		/* MP Man MPWIN895CL */
+		.driver_data = (void *)&mpman_mpwin895cl_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MPMAN"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MPWIN8900CL"),
+		},
+	},
+	{
+		/* Myria MY8307 */
+		.driver_data = (void *)&myria_my8307_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Complet Electro Serv"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MY8307"),
+		},
+	},
+	{
+		/* Onda oBook 20 Plus */
+		.driver_data = (void *)&onda_obook_20_plus_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ONDA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OBOOK 20 PLUS"),
+		},
+	},
+	{
+		/* ONDA V80 plus v3 (P80PSBG9V3A01501) */
+		.driver_data = (void *)&onda_v80_plus_v3_data,
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ONDA"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "V80 PLUS")
+		},
+	},
+	{
+		/* ONDA V820w DualOS */
+		.driver_data = (void *)&onda_v820w_32g_data,
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "ONDA"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "V820w DualOS")
+		},
+	},
+	{
+		/* ONDA V891 v5 */
+		.driver_data = (void *)&onda_v891_v5_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ONDA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ONDA Tablet"),
+			DMI_MATCH(DMI_BIOS_VERSION, "ONDA.D869CJABNRBA06"),
+		},
+	},
+	{
+		/* ONDA V891w revision P891WBEBV1B00 aka v1 */
+		.driver_data = (void *)&onda_v891w_v1_data,
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "ONDA"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "ONDA Tablet"),
+			DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V001"),
+			/* Exact match, different versions need different fw */
+			DMI_EXACT_MATCH(DMI_BIOS_VERSION, "ONDA.W89EBBN08"),
+		},
+	},
+	{
+		/* ONDA V891w Dual OS P891DCF2V1A01274 64GB */
+		.driver_data = (void *)&onda_v891w_v3_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ONDA Tablet"),
+			DMI_MATCH(DMI_BIOS_VERSION, "ONDA.D890HBBNR0A"),
+		},
+	},
+	{
+		/* Pipo W2S */
+		.driver_data = (void *)&pipo_w2s_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "PIPO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "W2S"),
+		},
+	},
+	{
+		/* Pipo W11 */
+		.driver_data = (void *)&pipo_w11_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "PIPO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "To be filled by O.E.M."),
+			/* Above matches are too generic, add bios-ver match */
+			DMI_MATCH(DMI_BIOS_VERSION, "JS-BI-10.6-SF133GR300-GA55B-024-F"),
+		},
+	},
+	{
+		/* Ployer Momo7w (same hardware as the Trekstor ST70416-6) */
+		.driver_data = (void *)&trekstor_surftab_wintron70_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Shenzhen PLOYER"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MOMO7W"),
+			/* Exact match, different versions need different fw */
+			DMI_MATCH(DMI_BIOS_VERSION, "MOMO.G.WI71C.MABMRBA02"),
+		},
+	},
+	{
+		/* Point of View mobii wintab p800w (v2.0) */
+		.driver_data = (void *)&pov_mobii_wintab_p800w_v20_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			DMI_MATCH(DMI_BIOS_VERSION, "3BAIR1014"),
+			/* Above matches are too generic, add bios-date match */
+			DMI_MATCH(DMI_BIOS_DATE, "10/24/2014"),
+		},
+	},
+	{
+		/* Predia Basic tablet) */
+		.driver_data = (void *)&predia_basic_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"),
+			/* Above matches are too generic, add bios-version match */
+			DMI_MATCH(DMI_BIOS_VERSION, "Mx.WT107.KUBNGEA"),
+		},
+	},
+	{
+		/* Point of View mobii wintab p800w (v2.1) */
+		.driver_data = (void *)&pov_mobii_wintab_p800w_v21_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+			DMI_MATCH(DMI_BIOS_VERSION, "3BAIR1013"),
+			/* Above matches are too generic, add bios-date match */
+			DMI_MATCH(DMI_BIOS_DATE, "08/22/2014"),
+		},
+	},
+	{
+		/* Point of View mobii wintab p1006w (v1.0) */
+		.driver_data = (void *)&pov_mobii_wintab_p1006w_v10_data,
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "BayTrail"),
+			/* Note 105b is Foxcon's USB/PCI vendor id */
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "105B"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "0E57"),
+		},
+	},
+	{
+		/* RCA Cambio W101 v2 */
+		/* https://github.com/onitake/gsl-firmware/discussions/193 */
+		.driver_data = (void *)&rca_cambio_w101_v2_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "RCA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "W101SA23T1"),
+		},
+	},
+	{
+		/* RWC NANOTE P8 */
+		.driver_data = (void *)&rwc_nanote_p8_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Default string"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AY07J"),
+			DMI_MATCH(DMI_PRODUCT_SKU, "0001")
+		},
+	},
+	{
+		/* Schneider SCT101CTM */
+		.driver_data = (void *)&schneider_sct101ctm_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Default string"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SCT101CTM"),
+		},
+	},
+	{
+		/* Techbite Arc 11.6 */
+		.driver_data = (void *)&techbite_arc_11_6_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "mPTech"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "techBite Arc 11.6"),
+			DMI_MATCH(DMI_BOARD_NAME, "G8316_272B"),
+		},
+	},
+	{
+		/* Teclast Tbook 11 */
+		.driver_data = (void *)&teclast_tbook11_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TECLAST"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TbooK 11"),
+			DMI_MATCH(DMI_PRODUCT_SKU, "E5A6_A1"),
+		},
+	},
+	{
+		/* Teclast X3 Plus */
+		.driver_data = (void *)&teclast_x3_plus_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TECLAST"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X3 Plus"),
+			DMI_MATCH(DMI_BOARD_NAME, "X3 Plus"),
+		},
+	},
+	{
+		/* Teclast X89 (Android version / BIOS) */
+		.driver_data = (void *)&gdix1001_00_upside_down_data,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "WISKY"),
+			DMI_MATCH(DMI_BOARD_NAME, "3G062i"),
+		},
+	},
+	{
+		/* Teclast X89 (Windows version / BIOS) */
+		.driver_data = (void *)&gdix1001_01_upside_down_data,
+		.matches = {
+			/* tPAD is too generic, also match on bios date */
+			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
+			DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
+			DMI_MATCH(DMI_BIOS_DATE, "12/19/2014"),
+		},
+	},
+	{
+		/* Teclast X98 Plus II */
+		.driver_data = (void *)&teclast_x98plus2_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TECLAST"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X98 Plus II"),
+		},
+	},
+	{
+		/* Teclast X98 Pro */
+		.driver_data = (void *)&gdix1001_00_upside_down_data,
+		.matches = {
+			/*
+			 * Only match BIOS date, because the manufacturers
+			 * BIOS does not report the board name at all
+			 * (sometimes)...
+			 */
+			DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
+			DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"),
+		},
+	},
+	{
+		/* Trekstor Primebook C11 */
+		.driver_data = (void *)&trekstor_primebook_c11_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Primebook C11"),
+		},
+	},
+	{
+		/* Trekstor Primebook C11B (same touchscreen as the C11) */
+		.driver_data = (void *)&trekstor_primebook_c11_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PRIMEBOOK C11B"),
+		},
+	},
+	{
+		/* Trekstor Primebook C13 */
+		.driver_data = (void *)&trekstor_primebook_c13_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Primebook C13"),
+		},
+	},
+	{
+		/* Trekstor Primetab T13B */
+		.driver_data = (void *)&trekstor_primetab_t13b_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Primetab T13B"),
+		},
+	},
+	{
+		/* TrekStor SurfTab duo W1 10.1 ST10432-10b */
+		.driver_data = (void *)&trekstor_surftab_duo_w1_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TrekStor"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SurfTab duo W1 10.1 (VT4)"),
+		},
+	},
+	{
+		/* TrekStor SurfTab twin 10.1 ST10432-8 */
+		.driver_data = (void *)&trekstor_surftab_twin_10_1_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TrekStor"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SurfTab twin 10.1"),
+		},
+	},
+	{
+		/* Trekstor Surftab Wintron 7.0 ST70416-6 */
+		.driver_data = (void *)&trekstor_surftab_wintron70_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ST70416-6"),
+			/* Exact match, different versions need different fw */
+			DMI_MATCH(DMI_BIOS_VERSION, "TREK.G.WI71C.JGBMRBA04"),
+		},
+	},
+	{
+		/* Trekstor Surftab Wintron 7.0 ST70416-6, newer BIOS */
+		.driver_data = (void *)&trekstor_surftab_wintron70_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TrekStor"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SurfTab wintron 7.0 ST70416-6"),
+			/* Exact match, different versions need different fw */
+			DMI_MATCH(DMI_BIOS_VERSION, "TREK.G.WI71C.JGBMRBA05"),
+		},
+	},
+	{
+		/* Trekstor Yourbook C11B (same touchscreen as the Primebook C11) */
+		.driver_data = (void *)&trekstor_primebook_c11_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TREKSTOR"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "YOURBOOK C11B"),
+		},
+	},
+	{
+		/* Viglen Connect 10 */
+		.driver_data = (void *)&viglen_connect_10_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Viglen Ltd."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Connect 10'' Tablet PC"),
+		},
+	},
+	{
+		/* Vinga Twizzle J116 */
+		.driver_data = (void *)&vinga_twizzle_j116_data,
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "VINGA Twizzle J116"),
+		},
+	},
+	{
+		/* "WinBook TW100" */
+		.driver_data = (void *)&gdix1001_00_upside_down_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TW100")
+		}
+	},
+	{
+		/* WinBook TW700 */
+		.driver_data = (void *)&gdix1001_00_upside_down_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TW700")
+		},
+	},
+	{
+		/* Yours Y8W81, same case and touchscreen as Chuwi Vi8 */
+		.driver_data = (void *)&chuwi_vi8_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "YOURS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Y8W81"),
+		},
+	},
+	{ }
+};
+
+static const struct ts_dmi_data *ts_data;
+
+static void ts_dmi_add_props(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	int error;
+
+	if (has_acpi_companion(dev) &&
+	    !strncmp(ts_data->acpi_name, client->name, I2C_NAME_SIZE)) {
+		error = device_create_managed_software_node(dev, ts_data->properties, NULL);
+		if (error)
+			dev_err(dev, "failed to add properties: %d\n", error);
+	}
+}
+
+static int ts_dmi_notifier_call(struct notifier_block *nb,
+				unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct i2c_client *client;
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		client = i2c_verify_client(dev);
+		if (client)
+			ts_dmi_add_props(client);
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static struct notifier_block ts_dmi_notifier = {
+	.notifier_call = ts_dmi_notifier_call,
+};
+
+static int __init ts_dmi_init(void)
+{
+	const struct dmi_system_id *dmi_id;
+	int error;
+
+	dmi_id = dmi_first_match(touchscreen_dmi_table);
+	if (!dmi_id)
+		return 0; /* Not an error */
+
+	ts_data = dmi_id->driver_data;
+	/* Some dmi table entries only provide an efi_embedded_fw_desc */
+	if (!ts_data->properties)
+		return 0;
+
+	error = bus_register_notifier(&i2c_bus_type, &ts_dmi_notifier);
+	if (error)
+		pr_err("%s: failed to register i2c bus notifier: %d\n",
+			__func__, error);
+
+	return error;
+}
+
+/*
+ * We are registering out notifier after i2c core is initialized and i2c bus
+ * itself is ready (which happens at postcore initcall level), but before
+ * ACPI starts enumerating devices (at subsys initcall level).
+ */
+arch_initcall(ts_dmi_init);