Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 843 insertions, 0 deletions

diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
new file mode 100644
index 000000000..307ee6f71
--- /dev/null
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -0,0 +1,843 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Battery temperature driver for AB8500
+ *
+ * Author:
+ *	Johan Palsson <johan.palsson@stericsson.com>
+ *	Karl Komierowski <karl.komierowski@stericsson.com>
+ *	Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/component.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/thermal.h>
+#include <linux/iio/consumer.h>
+#include <linux/fixp-arith.h>
+
+#include "ab8500-bm.h"
+
+#define BTEMP_THERMAL_LOW_LIMIT		-10
+#define BTEMP_THERMAL_MED_LIMIT		0
+#define BTEMP_THERMAL_HIGH_LIMIT_52	52
+#define BTEMP_THERMAL_HIGH_LIMIT_57	57
+#define BTEMP_THERMAL_HIGH_LIMIT_62	62
+
+#define BTEMP_BATCTRL_CURR_SRC_7UA	7
+#define BTEMP_BATCTRL_CURR_SRC_20UA	20
+
+#define BTEMP_BATCTRL_CURR_SRC_16UA	16
+#define BTEMP_BATCTRL_CURR_SRC_18UA	18
+
+#define BTEMP_BATCTRL_CURR_SRC_60UA	60
+#define BTEMP_BATCTRL_CURR_SRC_120UA	120
+
+/**
+ * struct ab8500_btemp_interrupts - ab8500 interrupts
+ * @name:	name of the interrupt
+ * @isr		function pointer to the isr
+ */
+struct ab8500_btemp_interrupts {
+	char *name;
+	irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct ab8500_btemp_events {
+	bool batt_rem;
+	bool btemp_high;
+	bool btemp_medhigh;
+	bool btemp_lowmed;
+	bool btemp_low;
+	bool ac_conn;
+	bool usb_conn;
+};
+
+struct ab8500_btemp_ranges {
+	int btemp_high_limit;
+	int btemp_med_limit;
+	int btemp_low_limit;
+};
+
+/**
+ * struct ab8500_btemp - ab8500 BTEMP device information
+ * @dev:		Pointer to the structure device
+ * @node:		List of AB8500 BTEMPs, hence prepared for reentrance
+ * @curr_source:	What current source we use, in uA
+ * @bat_temp:		Dispatched battery temperature in degree Celsius
+ * @prev_bat_temp	Last measured battery temperature in degree Celsius
+ * @parent:		Pointer to the struct ab8500
+ * @tz:			Thermal zone for the battery
+ * @adc_bat_ctrl:	ADC channel for the battery control
+ * @fg:			Pointer to the struct fg
+ * @bm:           	Platform specific battery management information
+ * @btemp_psy:		Structure for BTEMP specific battery properties
+ * @events:		Structure for information about events triggered
+ * @btemp_ranges:	Battery temperature range structure
+ * @btemp_wq:		Work queue for measuring the temperature periodically
+ * @btemp_periodic_work:	Work for measuring the temperature periodically
+ * @initialized:	True if battery id read.
+ */
+struct ab8500_btemp {
+	struct device *dev;
+	struct list_head node;
+	int curr_source;
+	int bat_temp;
+	int prev_bat_temp;
+	struct ab8500 *parent;
+	struct thermal_zone_device *tz;
+	struct iio_channel *bat_ctrl;
+	struct ab8500_fg *fg;
+	struct ab8500_bm_data *bm;
+	struct power_supply *btemp_psy;
+	struct ab8500_btemp_events events;
+	struct ab8500_btemp_ranges btemp_ranges;
+	struct workqueue_struct *btemp_wq;
+	struct delayed_work btemp_periodic_work;
+	bool initialized;
+};
+
+/* BTEMP power supply properties */
+static enum power_supply_property ab8500_btemp_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static LIST_HEAD(ab8500_btemp_list);
+
+/**
+ * ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance
+ * @di:		pointer to the ab8500_btemp structure
+ * @v_batctrl:	measured batctrl voltage
+ * @inst_curr:	measured instant current
+ *
+ * This function returns the battery resistance that is
+ * derived from the BATCTRL voltage.
+ * Returns value in Ohms.
+ */
+static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
+	int v_batctrl, int inst_curr)
+{
+	if (is_ab8500_1p1_or_earlier(di->parent)) {
+		/*
+		 * For ABB cut1.0 and 1.1 BAT_CTRL is internally
+		 * connected to 1.8V through a 450k resistor
+		 */
+		return (450000 * (v_batctrl)) / (1800 - v_batctrl);
+	}
+
+	/*
+	 * BAT_CTRL is internally
+	 * connected to 1.8V through a 80k resistor
+	 */
+	return (80000 * (v_batctrl)) / (1800 - v_batctrl);
+}
+
+/**
+ * ab8500_btemp_read_batctrl_voltage() - measure batctrl voltage
+ * @di:		pointer to the ab8500_btemp structure
+ *
+ * This function returns the voltage on BATCTRL. Returns value in mV.
+ */
+static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di)
+{
+	int vbtemp, ret;
+	static int prev;
+
+	ret = iio_read_channel_processed(di->bat_ctrl, &vbtemp);
+	if (ret < 0) {
+		dev_err(di->dev,
+			"%s ADC conversion failed, using previous value",
+			__func__);
+		return prev;
+	}
+	prev = vbtemp;
+	return vbtemp;
+}
+
+/**
+ * ab8500_btemp_get_batctrl_res() - get battery resistance
+ * @di:		pointer to the ab8500_btemp structure
+ *
+ * This function returns the battery pack identification resistance.
+ * Returns value in Ohms.
+ */
+static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di)
+{
+	int ret;
+	int batctrl = 0;
+	int res;
+	int inst_curr;
+	int i;
+
+	if (!di->fg)
+		di->fg = ab8500_fg_get();
+	if (!di->fg) {
+		dev_err(di->dev, "No fg found\n");
+		return -EINVAL;
+	}
+
+	ret = ab8500_fg_inst_curr_start(di->fg);
+
+	if (ret) {
+		dev_err(di->dev, "Failed to start current measurement\n");
+		return ret;
+	}
+
+	do {
+		msleep(20);
+	} while (!ab8500_fg_inst_curr_started(di->fg));
+
+	i = 0;
+
+	do {
+		batctrl += ab8500_btemp_read_batctrl_voltage(di);
+		i++;
+		msleep(20);
+	} while (!ab8500_fg_inst_curr_done(di->fg));
+	batctrl /= i;
+
+	ret = ab8500_fg_inst_curr_finalize(di->fg, &inst_curr);
+	if (ret) {
+		dev_err(di->dev, "Failed to finalize current measurement\n");
+		return ret;
+	}
+
+	res = ab8500_btemp_batctrl_volt_to_res(di, batctrl, inst_curr);
+
+	dev_dbg(di->dev, "%s batctrl: %d res: %d inst_curr: %d samples: %d\n",
+		__func__, batctrl, res, inst_curr, i);
+
+	return res;
+}
+
+/**
+ * ab8500_btemp_id() - Identify the connected battery
+ * @di:		pointer to the ab8500_btemp structure
+ *
+ * This function will try to identify the battery by reading the ID
+ * resistor. Some brands use a combined ID resistor with a NTC resistor to
+ * both be able to identify and to read the temperature of it.
+ */
+static int ab8500_btemp_id(struct ab8500_btemp *di)
+{
+	struct power_supply_battery_info *bi = di->bm->bi;
+	int res;
+
+	di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
+
+	res =  ab8500_btemp_get_batctrl_res(di);
+	if (res < 0) {
+		dev_err(di->dev, "%s get batctrl res failed\n", __func__);
+		return -ENXIO;
+	}
+
+	if (power_supply_battery_bti_in_range(bi, res)) {
+		dev_info(di->dev, "Battery detected on BATCTRL (pin C3)"
+			 " resistance %d Ohm = %d Ohm +/- %d%%\n",
+			 res, bi->bti_resistance_ohm,
+			 bi->bti_resistance_tolerance);
+	} else {
+		dev_warn(di->dev, "Battery identified as unknown"
+			 ", resistance %d Ohm\n", res);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+/**
+ * ab8500_btemp_periodic_work() - Measuring the temperature periodically
+ * @work:	pointer to the work_struct structure
+ *
+ * Work function for measuring the temperature periodically
+ */
+static void ab8500_btemp_periodic_work(struct work_struct *work)
+{
+	int interval;
+	int bat_temp;
+	struct ab8500_btemp *di = container_of(work,
+		struct ab8500_btemp, btemp_periodic_work.work);
+	/* Assume 25 degrees celsius as start temperature */
+	static int prev = 25;
+	int ret;
+
+	if (!di->initialized) {
+		/* Identify the battery */
+		if (ab8500_btemp_id(di) < 0)
+			dev_warn(di->dev, "failed to identify the battery\n");
+	}
+
+	/* Failover if a reading is erroneous, use last meausurement */
+	ret = thermal_zone_get_temp(di->tz, &bat_temp);
+	if (ret) {
+		dev_err(di->dev, "error reading temperature\n");
+		bat_temp = prev;
+	} else {
+		/* Convert from millicentigrades to centigrades */
+		bat_temp /= 1000;
+		prev = bat_temp;
+	}
+
+	/*
+	 * Filter battery temperature.
+	 * Allow direct updates on temperature only if two samples result in
+	 * same temperature. Else only allow 1 degree change from previous
+	 * reported value in the direction of the new measurement.
+	 */
+	if ((bat_temp == di->prev_bat_temp) || !di->initialized) {
+		if ((di->bat_temp != di->prev_bat_temp) || !di->initialized) {
+			di->initialized = true;
+			di->bat_temp = bat_temp;
+			power_supply_changed(di->btemp_psy);
+		}
+	} else if (bat_temp < di->prev_bat_temp) {
+		di->bat_temp--;
+		power_supply_changed(di->btemp_psy);
+	} else if (bat_temp > di->prev_bat_temp) {
+		di->bat_temp++;
+		power_supply_changed(di->btemp_psy);
+	}
+	di->prev_bat_temp = bat_temp;
+
+	if (di->events.ac_conn || di->events.usb_conn)
+		interval = di->bm->temp_interval_chg;
+	else
+		interval = di->bm->temp_interval_nochg;
+
+	/* Schedule a new measurement */
+	queue_delayed_work(di->btemp_wq,
+		&di->btemp_periodic_work,
+		round_jiffies(interval * HZ));
+}
+
+/**
+ * ab8500_btemp_batctrlindb_handler() - battery removal detected
+ * @irq:       interrupt number
+ * @_di:       void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_batctrlindb_handler(int irq, void *_di)
+{
+	struct ab8500_btemp *di = _di;
+	dev_err(di->dev, "Battery removal detected!\n");
+
+	di->events.batt_rem = true;
+	power_supply_changed(di->btemp_psy);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_templow_handler() - battery temp lower than 10 degrees
+ * @irq:       interrupt number
+ * @_di:       void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di)
+{
+	struct ab8500_btemp *di = _di;
+
+	if (is_ab8500_3p3_or_earlier(di->parent)) {
+		dev_dbg(di->dev, "Ignore false btemp low irq"
+			" for ABB cut 1.0, 1.1, 2.0 and 3.3\n");
+	} else {
+		dev_crit(di->dev, "Battery temperature lower than -10deg c\n");
+
+		di->events.btemp_low = true;
+		di->events.btemp_high = false;
+		di->events.btemp_medhigh = false;
+		di->events.btemp_lowmed = false;
+		power_supply_changed(di->btemp_psy);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_temphigh_handler() - battery temp higher than max temp
+ * @irq:       interrupt number
+ * @_di:       void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_temphigh_handler(int irq, void *_di)
+{
+	struct ab8500_btemp *di = _di;
+
+	dev_crit(di->dev, "Battery temperature is higher than MAX temp\n");
+
+	di->events.btemp_high = true;
+	di->events.btemp_medhigh = false;
+	di->events.btemp_lowmed = false;
+	di->events.btemp_low = false;
+	power_supply_changed(di->btemp_psy);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_lowmed_handler() - battery temp between low and medium
+ * @irq:       interrupt number
+ * @_di:       void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_lowmed_handler(int irq, void *_di)
+{
+	struct ab8500_btemp *di = _di;
+
+	dev_dbg(di->dev, "Battery temperature is between low and medium\n");
+
+	di->events.btemp_lowmed = true;
+	di->events.btemp_medhigh = false;
+	di->events.btemp_high = false;
+	di->events.btemp_low = false;
+	power_supply_changed(di->btemp_psy);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_medhigh_handler() - battery temp between medium and high
+ * @irq:       interrupt number
+ * @_di:       void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_medhigh_handler(int irq, void *_di)
+{
+	struct ab8500_btemp *di = _di;
+
+	dev_dbg(di->dev, "Battery temperature is between medium and high\n");
+
+	di->events.btemp_medhigh = true;
+	di->events.btemp_lowmed = false;
+	di->events.btemp_high = false;
+	di->events.btemp_low = false;
+	power_supply_changed(di->btemp_psy);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_periodic() - Periodic temperature measurements
+ * @di:		pointer to the ab8500_btemp structure
+ * @enable:	enable or disable periodic temperature measurements
+ *
+ * Starts of stops periodic temperature measurements. Periodic measurements
+ * should only be done when a charger is connected.
+ */
+static void ab8500_btemp_periodic(struct ab8500_btemp *di,
+	bool enable)
+{
+	dev_dbg(di->dev, "Enable periodic temperature measurements: %d\n",
+		enable);
+	/*
+	 * Make sure a new measurement is done directly by cancelling
+	 * any pending work
+	 */
+	cancel_delayed_work_sync(&di->btemp_periodic_work);
+
+	if (enable)
+		queue_delayed_work(di->btemp_wq, &di->btemp_periodic_work, 0);
+}
+
+/**
+ * ab8500_btemp_get_temp() - get battery temperature
+ * @di:		pointer to the ab8500_btemp structure
+ *
+ * Returns battery temperature
+ */
+static int ab8500_btemp_get_temp(struct ab8500_btemp *di)
+{
+	int temp = 0;
+
+	/*
+	 * The BTEMP events are not reliabe on AB8500 cut3.3
+	 * and prior versions
+	 */
+	if (is_ab8500_3p3_or_earlier(di->parent)) {
+		temp = di->bat_temp * 10;
+	} else {
+		if (di->events.btemp_low) {
+			if (temp > di->btemp_ranges.btemp_low_limit)
+				temp = di->btemp_ranges.btemp_low_limit * 10;
+			else
+				temp = di->bat_temp * 10;
+		} else if (di->events.btemp_high) {
+			if (temp < di->btemp_ranges.btemp_high_limit)
+				temp = di->btemp_ranges.btemp_high_limit * 10;
+			else
+				temp = di->bat_temp * 10;
+		} else if (di->events.btemp_lowmed) {
+			if (temp > di->btemp_ranges.btemp_med_limit)
+				temp = di->btemp_ranges.btemp_med_limit * 10;
+			else
+				temp = di->bat_temp * 10;
+		} else if (di->events.btemp_medhigh) {
+			if (temp < di->btemp_ranges.btemp_med_limit)
+				temp = di->btemp_ranges.btemp_med_limit * 10;
+			else
+				temp = di->bat_temp * 10;
+		} else
+			temp = di->bat_temp * 10;
+	}
+	return temp;
+}
+
+/**
+ * ab8500_btemp_get_property() - get the btemp properties
+ * @psy:        pointer to the power_supply structure
+ * @psp:        pointer to the power_supply_property structure
+ * @val:        pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the btemp
+ * properties by reading the sysfs files.
+ * online:	presence of the battery
+ * present:	presence of the battery
+ * technology:	battery technology
+ * temp:	battery temperature
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_btemp_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct ab8500_btemp *di = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (di->events.batt_rem)
+			val->intval = 0;
+		else
+			val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		if (di->bm->bi)
+			val->intval = di->bm->bi->technology;
+		else
+			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = ab8500_btemp_get_temp(di);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data)
+{
+	struct power_supply *psy;
+	struct power_supply *ext = dev_get_drvdata(dev);
+	const char **supplicants = (const char **)ext->supplied_to;
+	struct ab8500_btemp *di;
+	union power_supply_propval ret;
+	int j;
+
+	psy = (struct power_supply *)data;
+	di = power_supply_get_drvdata(psy);
+
+	/*
+	 * For all psy where the name of your driver
+	 * appears in any supplied_to
+	 */
+	j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+	if (j < 0)
+		return 0;
+
+	/* Go through all properties for the psy */
+	for (j = 0; j < ext->desc->num_properties; j++) {
+		enum power_supply_property prop;
+		prop = ext->desc->properties[j];
+
+		if (power_supply_get_property(ext, prop, &ret))
+			continue;
+
+		switch (prop) {
+		case POWER_SUPPLY_PROP_PRESENT:
+			switch (ext->desc->type) {
+			case POWER_SUPPLY_TYPE_MAINS:
+				/* AC disconnected */
+				if (!ret.intval && di->events.ac_conn) {
+					di->events.ac_conn = false;
+				}
+				/* AC connected */
+				else if (ret.intval && !di->events.ac_conn) {
+					di->events.ac_conn = true;
+					if (!di->events.usb_conn)
+						ab8500_btemp_periodic(di, true);
+				}
+				break;
+			case POWER_SUPPLY_TYPE_USB:
+				/* USB disconnected */
+				if (!ret.intval && di->events.usb_conn) {
+					di->events.usb_conn = false;
+				}
+				/* USB connected */
+				else if (ret.intval && !di->events.usb_conn) {
+					di->events.usb_conn = true;
+					if (!di->events.ac_conn)
+						ab8500_btemp_periodic(di, true);
+				}
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+	return 0;
+}
+
+/**
+ * ab8500_btemp_external_power_changed() - callback for power supply changes
+ * @psy:       pointer to the structure power_supply
+ *
+ * This function is pointing to the function pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in the external power
+ * supply to the btemp.
+ */
+static void ab8500_btemp_external_power_changed(struct power_supply *psy)
+{
+	struct ab8500_btemp *di = power_supply_get_drvdata(psy);
+
+	class_for_each_device(power_supply_class, NULL,
+		di->btemp_psy, ab8500_btemp_get_ext_psy_data);
+}
+
+/* ab8500 btemp driver interrupts and their respective isr */
+static struct ab8500_btemp_interrupts ab8500_btemp_irq[] = {
+	{"BAT_CTRL_INDB", ab8500_btemp_batctrlindb_handler},
+	{"BTEMP_LOW", ab8500_btemp_templow_handler},
+	{"BTEMP_HIGH", ab8500_btemp_temphigh_handler},
+	{"BTEMP_LOW_MEDIUM", ab8500_btemp_lowmed_handler},
+	{"BTEMP_MEDIUM_HIGH", ab8500_btemp_medhigh_handler},
+};
+
+static int __maybe_unused ab8500_btemp_resume(struct device *dev)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	ab8500_btemp_periodic(di, true);
+
+	return 0;
+}
+
+static int __maybe_unused ab8500_btemp_suspend(struct device *dev)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	ab8500_btemp_periodic(di, false);
+
+	return 0;
+}
+
+static char *supply_interface[] = {
+	"ab8500_chargalg",
+	"ab8500_fg",
+};
+
+static const struct power_supply_desc ab8500_btemp_desc = {
+	.name			= "ab8500_btemp",
+	.type			= POWER_SUPPLY_TYPE_BATTERY,
+	.properties		= ab8500_btemp_props,
+	.num_properties		= ARRAY_SIZE(ab8500_btemp_props),
+	.get_property		= ab8500_btemp_get_property,
+	.external_power_changed	= ab8500_btemp_external_power_changed,
+};
+
+static int ab8500_btemp_bind(struct device *dev, struct device *master,
+			     void *data)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	/* Create a work queue for the btemp */
+	di->btemp_wq =
+		alloc_workqueue("ab8500_btemp_wq", WQ_MEM_RECLAIM, 0);
+	if (di->btemp_wq == NULL) {
+		dev_err(dev, "failed to create work queue\n");
+		return -ENOMEM;
+	}
+
+	/* Kick off periodic temperature measurements */
+	ab8500_btemp_periodic(di, true);
+
+	return 0;
+}
+
+static void ab8500_btemp_unbind(struct device *dev, struct device *master,
+				void *data)
+{
+	struct ab8500_btemp *di = dev_get_drvdata(dev);
+
+	/* Delete the work queue */
+	destroy_workqueue(di->btemp_wq);
+}
+
+static const struct component_ops ab8500_btemp_component_ops = {
+	.bind = ab8500_btemp_bind,
+	.unbind = ab8500_btemp_unbind,
+};
+
+static int ab8500_btemp_probe(struct platform_device *pdev)
+{
+	struct power_supply_config psy_cfg = {};
+	struct device *dev = &pdev->dev;
+	struct ab8500_btemp *di;
+	int irq, i, ret = 0;
+	u8 val;
+
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	di->bm = &ab8500_bm_data;
+
+	/* get parent data */
+	di->dev = dev;
+	di->parent = dev_get_drvdata(pdev->dev.parent);
+
+	/* Get thermal zone and ADC */
+	di->tz = thermal_zone_get_zone_by_name("battery-thermal");
+	if (IS_ERR(di->tz)) {
+		ret = PTR_ERR(di->tz);
+		/*
+		 * This usually just means we are probing before the thermal
+		 * zone, so just defer.
+		 */
+		if (ret == -ENODEV)
+			ret = -EPROBE_DEFER;
+		return dev_err_probe(dev, ret,
+				     "failed to get battery thermal zone\n");
+	}
+	di->bat_ctrl = devm_iio_channel_get(dev, "bat_ctrl");
+	if (IS_ERR(di->bat_ctrl)) {
+		ret = dev_err_probe(dev, PTR_ERR(di->bat_ctrl),
+				    "failed to get BAT CTRL ADC channel\n");
+		return ret;
+	}
+
+	di->initialized = false;
+
+	psy_cfg.supplied_to = supply_interface;
+	psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+	psy_cfg.drv_data = di;
+
+	/* Init work for measuring temperature periodically */
+	INIT_DEFERRABLE_WORK(&di->btemp_periodic_work,
+		ab8500_btemp_periodic_work);
+
+	/* Set BTEMP thermal limits. Low and Med are fixed */
+	di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT;
+	di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT;
+
+	ret = abx500_get_register_interruptible(dev, AB8500_CHARGER,
+		AB8500_BTEMP_HIGH_TH, &val);
+	if (ret < 0) {
+		dev_err(dev, "%s ab8500 read failed\n", __func__);
+		return ret;
+	}
+	switch (val) {
+	case BTEMP_HIGH_TH_57_0:
+	case BTEMP_HIGH_TH_57_1:
+		di->btemp_ranges.btemp_high_limit =
+			BTEMP_THERMAL_HIGH_LIMIT_57;
+		break;
+	case BTEMP_HIGH_TH_52:
+		di->btemp_ranges.btemp_high_limit =
+			BTEMP_THERMAL_HIGH_LIMIT_52;
+		break;
+	case BTEMP_HIGH_TH_62:
+		di->btemp_ranges.btemp_high_limit =
+			BTEMP_THERMAL_HIGH_LIMIT_62;
+		break;
+	}
+
+	/* Register BTEMP power supply class */
+	di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc,
+						   &psy_cfg);
+	if (IS_ERR(di->btemp_psy)) {
+		dev_err(dev, "failed to register BTEMP psy\n");
+		return PTR_ERR(di->btemp_psy);
+	}
+
+	/* Register interrupts */
+	for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
+		irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
+		if (irq < 0)
+			return irq;
+
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+			ab8500_btemp_irq[i].isr,
+			IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
+			ab8500_btemp_irq[i].name, di);
+
+		if (ret) {
+			dev_err(dev, "failed to request %s IRQ %d: %d\n"
+				, ab8500_btemp_irq[i].name, irq, ret);
+			return ret;
+		}
+		dev_dbg(dev, "Requested %s IRQ %d: %d\n",
+			ab8500_btemp_irq[i].name, irq, ret);
+	}
+
+	platform_set_drvdata(pdev, di);
+
+	list_add_tail(&di->node, &ab8500_btemp_list);
+
+	return component_add(dev, &ab8500_btemp_component_ops);
+}
+
+static int ab8500_btemp_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &ab8500_btemp_component_ops);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ab8500_btemp_pm_ops, ab8500_btemp_suspend, ab8500_btemp_resume);
+
+static const struct of_device_id ab8500_btemp_match[] = {
+	{ .compatible = "stericsson,ab8500-btemp", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ab8500_btemp_match);
+
+struct platform_driver ab8500_btemp_driver = {
+	.probe = ab8500_btemp_probe,
+	.remove = ab8500_btemp_remove,
+	.driver = {
+		.name = "ab8500-btemp",
+		.of_match_table = ab8500_btemp_match,
+		.pm = &ab8500_btemp_pm_ops,
+	},
+};
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
+MODULE_ALIAS("platform:ab8500-btemp");
+MODULE_DESCRIPTION("AB8500 battery temperature driver");