Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 514 insertions, 0 deletions

diff --git a/drivers/power/supply/isp1704_charger.c b/drivers/power/supply/isp1704_charger.c
new file mode 100644
index 000000000..b6efc454e
--- /dev/null
+++ b/drivers/power/supply/isp1704_charger.c
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ISP1704 USB Charger Detection driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2012 - 2013 Pali Rohár <pali@kernel.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Vendor specific Power Control register */
+#define ISP1704_PWR_CTRL		0x3d
+#define ISP1704_PWR_CTRL_SWCTRL		(1 << 0)
+#define ISP1704_PWR_CTRL_DET_COMP	(1 << 1)
+#define ISP1704_PWR_CTRL_BVALID_RISE	(1 << 2)
+#define ISP1704_PWR_CTRL_BVALID_FALL	(1 << 3)
+#define ISP1704_PWR_CTRL_DP_WKPU_EN	(1 << 4)
+#define ISP1704_PWR_CTRL_VDAT_DET	(1 << 5)
+#define ISP1704_PWR_CTRL_DPVSRC_EN	(1 << 6)
+#define ISP1704_PWR_CTRL_HWDETECT	(1 << 7)
+
+#define NXP_VENDOR_ID			0x04cc
+
+static u16 isp170x_id[] = {
+	0x1704,
+	0x1707,
+};
+
+struct isp1704_charger {
+	struct device			*dev;
+	struct power_supply		*psy;
+	struct power_supply_desc	psy_desc;
+	struct gpio_desc		*enable_gpio;
+	struct usb_phy			*phy;
+	struct notifier_block		nb;
+	struct work_struct		work;
+
+	/* properties */
+	char			model[8];
+	unsigned		present:1;
+	unsigned		online:1;
+	unsigned		current_max;
+};
+
+static inline int isp1704_read(struct isp1704_charger *isp, u32 reg)
+{
+	return usb_phy_io_read(isp->phy, reg);
+}
+
+static inline int isp1704_write(struct isp1704_charger *isp, u32 reg, u32 val)
+{
+	return usb_phy_io_write(isp->phy, val, reg);
+}
+
+static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on)
+{
+	gpiod_set_value(isp->enable_gpio, on);
+}
+
+/*
+ * Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB
+ * chargers).
+ *
+ * REVISIT: The method is defined in Battery Charging Specification and is
+ * applicable to any ULPI transceiver. Nothing isp170x specific here.
+ */
+static inline int isp1704_charger_type(struct isp1704_charger *isp)
+{
+	u8 reg;
+	u8 func_ctrl;
+	u8 otg_ctrl;
+	int type = POWER_SUPPLY_TYPE_USB_DCP;
+
+	func_ctrl = isp1704_read(isp, ULPI_FUNC_CTRL);
+	otg_ctrl = isp1704_read(isp, ULPI_OTG_CTRL);
+
+	/* disable pulldowns */
+	reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN;
+	isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), reg);
+
+	/* full speed */
+	isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
+			ULPI_FUNC_CTRL_XCVRSEL_MASK);
+	isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL),
+			ULPI_FUNC_CTRL_FULL_SPEED);
+
+	/* Enable strong pull-up on DP (1.5K) and reset */
+	reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
+	isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), reg);
+	usleep_range(1000, 2000);
+
+	reg = isp1704_read(isp, ULPI_DEBUG);
+	if ((reg & 3) != 3)
+		type = POWER_SUPPLY_TYPE_USB_CDP;
+
+	/* recover original state */
+	isp1704_write(isp, ULPI_FUNC_CTRL, func_ctrl);
+	isp1704_write(isp, ULPI_OTG_CTRL, otg_ctrl);
+
+	return type;
+}
+
+/*
+ * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger
+ * is actually a dedicated charger, the following steps need to be taken.
+ */
+static inline int isp1704_charger_verify(struct isp1704_charger *isp)
+{
+	int	ret = 0;
+	u8	r;
+
+	/* Reset the transceiver */
+	r = isp1704_read(isp, ULPI_FUNC_CTRL);
+	r |= ULPI_FUNC_CTRL_RESET;
+	isp1704_write(isp, ULPI_FUNC_CTRL, r);
+	usleep_range(1000, 2000);
+
+	/* Set normal mode */
+	r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK);
+	isp1704_write(isp, ULPI_FUNC_CTRL, r);
+
+	/* Clear the DP and DM pull-down bits */
+	r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN;
+	isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), r);
+
+	/* Enable strong pull-up on DP (1.5K) and reset */
+	r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
+	isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), r);
+	usleep_range(1000, 2000);
+
+	/* Read the line state */
+	if (!isp1704_read(isp, ULPI_DEBUG)) {
+		/* Disable strong pull-up on DP (1.5K) */
+		isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
+				ULPI_FUNC_CTRL_TERMSELECT);
+		return 1;
+	}
+
+	/* Is it a charger or PS/2 connection */
+
+	/* Enable weak pull-up resistor on DP */
+	isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
+			ISP1704_PWR_CTRL_DP_WKPU_EN);
+
+	/* Disable strong pull-up on DP (1.5K) */
+	isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
+			ULPI_FUNC_CTRL_TERMSELECT);
+
+	/* Enable weak pull-down resistor on DM */
+	isp1704_write(isp, ULPI_SET(ULPI_OTG_CTRL),
+			ULPI_OTG_CTRL_DM_PULLDOWN);
+
+	/* It's a charger if the line states are clear */
+	if (!(isp1704_read(isp, ULPI_DEBUG)))
+		ret = 1;
+
+	/* Disable weak pull-up resistor on DP */
+	isp1704_write(isp, ULPI_CLR(ISP1704_PWR_CTRL),
+			ISP1704_PWR_CTRL_DP_WKPU_EN);
+
+	return ret;
+}
+
+static inline int isp1704_charger_detect(struct isp1704_charger *isp)
+{
+	unsigned long	timeout;
+	u8		pwr_ctrl;
+	int		ret = 0;
+
+	pwr_ctrl = isp1704_read(isp, ISP1704_PWR_CTRL);
+
+	/* set SW control bit in PWR_CTRL register */
+	isp1704_write(isp, ISP1704_PWR_CTRL,
+			ISP1704_PWR_CTRL_SWCTRL);
+
+	/* enable manual charger detection */
+	isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
+			ISP1704_PWR_CTRL_SWCTRL
+			| ISP1704_PWR_CTRL_DPVSRC_EN);
+	usleep_range(1000, 2000);
+
+	timeout = jiffies + msecs_to_jiffies(300);
+	do {
+		/* Check if there is a charger */
+		if (isp1704_read(isp, ISP1704_PWR_CTRL)
+				& ISP1704_PWR_CTRL_VDAT_DET) {
+			ret = isp1704_charger_verify(isp);
+			break;
+		}
+	} while (!time_after(jiffies, timeout) && isp->online);
+
+	/* recover original state */
+	isp1704_write(isp, ISP1704_PWR_CTRL, pwr_ctrl);
+
+	return ret;
+}
+
+static inline int isp1704_charger_detect_dcp(struct isp1704_charger *isp)
+{
+	if (isp1704_charger_detect(isp) &&
+			isp1704_charger_type(isp) == POWER_SUPPLY_TYPE_USB_DCP)
+		return true;
+	else
+		return false;
+}
+
+static void isp1704_charger_work(struct work_struct *data)
+{
+	struct isp1704_charger	*isp =
+		container_of(data, struct isp1704_charger, work);
+	static DEFINE_MUTEX(lock);
+
+	mutex_lock(&lock);
+
+	switch (isp->phy->last_event) {
+	case USB_EVENT_VBUS:
+		/* do not call wall charger detection more times */
+		if (!isp->present) {
+			isp->online = true;
+			isp->present = 1;
+			isp1704_charger_set_power(isp, 1);
+
+			/* detect wall charger */
+			if (isp1704_charger_detect_dcp(isp)) {
+				isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_DCP;
+				isp->current_max = 1800;
+			} else {
+				isp->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+				isp->current_max = 500;
+			}
+
+			/* enable data pullups */
+			if (isp->phy->otg->gadget)
+				usb_gadget_connect(isp->phy->otg->gadget);
+		}
+
+		if (isp->psy_desc.type != POWER_SUPPLY_TYPE_USB_DCP) {
+			/*
+			 * Only 500mA here or high speed chirp
+			 * handshaking may break
+			 */
+			if (isp->current_max > 500)
+				isp->current_max = 500;
+
+			if (isp->current_max > 100)
+				isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_CDP;
+		}
+		break;
+	case USB_EVENT_NONE:
+		isp->online = false;
+		isp->present = 0;
+		isp->current_max = 0;
+		isp->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+
+		/*
+		 * Disable data pullups. We need to prevent the controller from
+		 * enumerating.
+		 *
+		 * FIXME: This is here to allow charger detection with Host/HUB
+		 * chargers. The pullups may be enabled elsewhere, so this can
+		 * not be the final solution.
+		 */
+		if (isp->phy->otg->gadget)
+			usb_gadget_disconnect(isp->phy->otg->gadget);
+
+		isp1704_charger_set_power(isp, 0);
+		break;
+	default:
+		goto out;
+	}
+
+	power_supply_changed(isp->psy);
+out:
+	mutex_unlock(&lock);
+}
+
+static int isp1704_notifier_call(struct notifier_block *nb,
+		unsigned long val, void *v)
+{
+	struct isp1704_charger *isp =
+		container_of(nb, struct isp1704_charger, nb);
+
+	schedule_work(&isp->work);
+
+	return NOTIFY_OK;
+}
+
+static int isp1704_charger_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct isp1704_charger *isp = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = isp->present;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = isp->online;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		val->intval = isp->current_max;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = isp->model;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = "NXP";
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property power_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static inline int isp1704_test_ulpi(struct isp1704_charger *isp)
+{
+	int vendor;
+	int product;
+	int i;
+	int ret;
+
+	/* Test ULPI interface */
+	ret = isp1704_write(isp, ULPI_SCRATCH, 0xaa);
+	if (ret < 0)
+		return ret;
+
+	ret = isp1704_read(isp, ULPI_SCRATCH);
+	if (ret < 0)
+		return ret;
+
+	if (ret != 0xaa)
+		return -ENODEV;
+
+	/* Verify the product and vendor id matches */
+	vendor = isp1704_read(isp, ULPI_VENDOR_ID_LOW);
+	vendor |= isp1704_read(isp, ULPI_VENDOR_ID_HIGH) << 8;
+	if (vendor != NXP_VENDOR_ID)
+		return -ENODEV;
+
+	product = isp1704_read(isp, ULPI_PRODUCT_ID_LOW);
+	product |= isp1704_read(isp, ULPI_PRODUCT_ID_HIGH) << 8;
+
+	for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) {
+		if (product == isp170x_id[i]) {
+			sprintf(isp->model, "isp%x", product);
+			return product;
+		}
+	}
+
+	dev_err(isp->dev, "product id %x not matching known ids", product);
+
+	return -ENODEV;
+}
+
+static int isp1704_charger_probe(struct platform_device *pdev)
+{
+	struct isp1704_charger	*isp;
+	int			ret = -ENODEV;
+	struct power_supply_config psy_cfg = {};
+
+	isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL);
+	if (!isp)
+		return -ENOMEM;
+
+	isp->enable_gpio = devm_gpiod_get(&pdev->dev, "nxp,enable",
+					  GPIOD_OUT_HIGH);
+	if (IS_ERR(isp->enable_gpio)) {
+		ret = PTR_ERR(isp->enable_gpio);
+		dev_err(&pdev->dev, "Could not get reset gpio: %d\n", ret);
+		return ret;
+	}
+
+	if (pdev->dev.of_node)
+		isp->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+	else
+		isp->phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+
+	if (IS_ERR(isp->phy)) {
+		ret = PTR_ERR(isp->phy);
+		dev_err(&pdev->dev, "usb_get_phy failed\n");
+		goto fail0;
+	}
+
+	isp->dev = &pdev->dev;
+	platform_set_drvdata(pdev, isp);
+
+	isp1704_charger_set_power(isp, 1);
+
+	ret = isp1704_test_ulpi(isp);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "isp1704_test_ulpi failed\n");
+		goto fail1;
+	}
+
+	isp->psy_desc.name		= "isp1704";
+	isp->psy_desc.type		= POWER_SUPPLY_TYPE_USB;
+	isp->psy_desc.properties	= power_props;
+	isp->psy_desc.num_properties	= ARRAY_SIZE(power_props);
+	isp->psy_desc.get_property	= isp1704_charger_get_property;
+
+	psy_cfg.drv_data		= isp;
+
+	isp->psy = power_supply_register(isp->dev, &isp->psy_desc, &psy_cfg);
+	if (IS_ERR(isp->psy)) {
+		ret = PTR_ERR(isp->psy);
+		dev_err(&pdev->dev, "power_supply_register failed\n");
+		goto fail1;
+	}
+
+	/*
+	 * REVISIT: using work in order to allow the usb notifications to be
+	 * made atomically in the future.
+	 */
+	INIT_WORK(&isp->work, isp1704_charger_work);
+
+	isp->nb.notifier_call = isp1704_notifier_call;
+
+	ret = usb_register_notifier(isp->phy, &isp->nb);
+	if (ret) {
+		dev_err(&pdev->dev, "usb_register_notifier failed\n");
+		goto fail2;
+	}
+
+	dev_info(isp->dev, "registered with product id %s\n", isp->model);
+
+	/*
+	 * Taking over the D+ pullup.
+	 *
+	 * FIXME: The device will be disconnected if it was already
+	 * enumerated. The charger driver should be always loaded before any
+	 * gadget is loaded.
+	 */
+	if (isp->phy->otg->gadget)
+		usb_gadget_disconnect(isp->phy->otg->gadget);
+
+	if (isp->phy->last_event == USB_EVENT_NONE)
+		isp1704_charger_set_power(isp, 0);
+
+	/* Detect charger if VBUS is valid (the cable was already plugged). */
+	if (isp->phy->last_event == USB_EVENT_VBUS &&
+			!isp->phy->otg->default_a)
+		schedule_work(&isp->work);
+
+	return 0;
+fail2:
+	power_supply_unregister(isp->psy);
+fail1:
+	isp1704_charger_set_power(isp, 0);
+fail0:
+	dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret);
+
+	return ret;
+}
+
+static int isp1704_charger_remove(struct platform_device *pdev)
+{
+	struct isp1704_charger *isp = platform_get_drvdata(pdev);
+
+	usb_unregister_notifier(isp->phy, &isp->nb);
+	power_supply_unregister(isp->psy);
+	isp1704_charger_set_power(isp, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_isp1704_of_match[] = {
+	{ .compatible = "nxp,isp1704", },
+	{ .compatible = "nxp,isp1707", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_isp1704_of_match);
+#endif
+
+static struct platform_driver isp1704_charger_driver = {
+	.driver = {
+		.name = "isp1704_charger",
+		.of_match_table = of_match_ptr(omap_isp1704_of_match),
+	},
+	.probe = isp1704_charger_probe,
+	.remove = isp1704_charger_remove,
+};
+
+module_platform_driver(isp1704_charger_driver);
+
+MODULE_ALIAS("platform:isp1704_charger");
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("ISP170x USB Charger driver");
+MODULE_LICENSE("GPL");