Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 648 insertions, 0 deletions

diff --git a/drivers/power/supply/max14577_charger.c b/drivers/power/supply/max14577_charger.c
new file mode 100644
index 000000000..f244cd902
--- /dev/null
+++ b/drivers/power/supply/max14577_charger.c
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max14577_charger.c - Battery charger driver for the Maxim 14577/77836
+//
+// Copyright (C) 2013,2014 Samsung Electronics
+// Krzysztof Kozlowski <krzk@kernel.org>
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max14577-private.h>
+#include <linux/mfd/max14577.h>
+
+struct max14577_charger {
+	struct device		*dev;
+	struct max14577		*max14577;
+	struct power_supply	*charger;
+
+	struct max14577_charger_platform_data	*pdata;
+};
+
+/*
+ * Helper function for mapping values of STATUS2/CHGTYP register on max14577
+ * and max77836 chipsets to enum maxim_muic_charger_type.
+ */
+static enum max14577_muic_charger_type maxim_get_charger_type(
+		enum maxim_device_type dev_type, u8 val) {
+	switch (val) {
+	case MAX14577_CHARGER_TYPE_NONE:
+	case MAX14577_CHARGER_TYPE_USB:
+	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
+	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
+	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
+	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
+		return val;
+	case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+	case MAX14577_CHARGER_TYPE_RESERVED:
+		if (dev_type == MAXIM_DEVICE_TYPE_MAX77836)
+			val |= 0x8;
+		return val;
+	default:
+		WARN_ONCE(1, "max14577: Unsupported chgtyp register value 0x%02x", val);
+		return val;
+	}
+}
+
+static int max14577_get_charger_state(struct max14577_charger *chg, int *val)
+{
+	struct regmap *rmap = chg->max14577->regmap;
+	int ret;
+	u8 reg_data;
+
+	/*
+	 * Charging occurs only if:
+	 *  - CHGCTRL2/MBCHOSTEN == 1
+	 *  - STATUS2/CGMBC == 1
+	 *
+	 * TODO:
+	 *  - handle FULL after Top-off timer (EOC register may be off
+	 *    and the charger won't be charging although MBCHOSTEN is on)
+	 *  - handle properly dead-battery charging (respect timer)
+	 *  - handle timers (fast-charge and prequal) /MBCCHGERR/
+	 */
+	ret = max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, &reg_data);
+	if (ret < 0)
+		goto out;
+
+	if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0) {
+		*val = POWER_SUPPLY_STATUS_DISCHARGING;
+		goto out;
+	}
+
+	ret = max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
+	if (ret < 0)
+		goto out;
+
+	if (reg_data & STATUS3_CGMBC_MASK) {
+		/* Charger or USB-cable is connected */
+		if (reg_data & STATUS3_EOC_MASK)
+			*val = POWER_SUPPLY_STATUS_FULL;
+		else
+			*val = POWER_SUPPLY_STATUS_CHARGING;
+		goto out;
+	}
+
+	*val = POWER_SUPPLY_STATUS_DISCHARGING;
+
+out:
+	return ret;
+}
+
+/*
+ * Supported charge types:
+ *  - POWER_SUPPLY_CHARGE_TYPE_NONE
+ *  - POWER_SUPPLY_CHARGE_TYPE_FAST
+ */
+static int max14577_get_charge_type(struct max14577_charger *chg, int *val)
+{
+	int ret, charging;
+
+	/*
+	 * TODO: CHARGE_TYPE_TRICKLE (VCHGR_RC or EOC)?
+	 * As spec says:
+	 * [after reaching EOC interrupt]
+	 * "When the battery is fully charged, the 30-minute (typ)
+	 *  top-off timer starts. The device continues to trickle
+	 *  charge the battery until the top-off timer runs out."
+	 */
+	ret = max14577_get_charger_state(chg, &charging);
+	if (ret < 0)
+		return ret;
+
+	if (charging == POWER_SUPPLY_STATUS_CHARGING)
+		*val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+	else
+		*val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+
+	return 0;
+}
+
+static int max14577_get_online(struct max14577_charger *chg, int *val)
+{
+	struct regmap *rmap = chg->max14577->regmap;
+	u8 reg_data;
+	int ret;
+	enum max14577_muic_charger_type chg_type;
+
+	ret = max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, &reg_data);
+	if (ret < 0)
+		return ret;
+
+	reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT);
+	chg_type = maxim_get_charger_type(chg->max14577->dev_type, reg_data);
+	switch (chg_type) {
+	case MAX14577_CHARGER_TYPE_USB:
+	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
+	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
+	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
+	case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+	case MAX77836_CHARGER_TYPE_SPECIAL_BIAS:
+		*val = 1;
+		break;
+	case MAX14577_CHARGER_TYPE_NONE:
+	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
+	case MAX14577_CHARGER_TYPE_RESERVED:
+	case MAX77836_CHARGER_TYPE_RESERVED:
+	default:
+		*val = 0;
+	}
+
+	return 0;
+}
+
+/*
+ * Supported health statuses:
+ *  - POWER_SUPPLY_HEALTH_DEAD
+ *  - POWER_SUPPLY_HEALTH_OVERVOLTAGE
+ *  - POWER_SUPPLY_HEALTH_GOOD
+ */
+static int max14577_get_battery_health(struct max14577_charger *chg, int *val)
+{
+	struct regmap *rmap = chg->max14577->regmap;
+	int ret;
+	u8 reg_data;
+	enum max14577_muic_charger_type chg_type;
+
+	ret = max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, &reg_data);
+	if (ret < 0)
+		goto out;
+
+	reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT);
+	chg_type = maxim_get_charger_type(chg->max14577->dev_type, reg_data);
+	if (chg_type == MAX14577_CHARGER_TYPE_DEAD_BATTERY) {
+		*val = POWER_SUPPLY_HEALTH_DEAD;
+		goto out;
+	}
+
+	ret = max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
+	if (ret < 0)
+		goto out;
+
+	if (reg_data & STATUS3_OVP_MASK) {
+		*val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		goto out;
+	}
+
+	/* Not dead, not overvoltage */
+	*val = POWER_SUPPLY_HEALTH_GOOD;
+
+out:
+	return ret;
+}
+
+/*
+ * Always returns 1.
+ * The max14577 chip doesn't report any status of battery presence.
+ * Lets assume that it will always be used with some battery.
+ */
+static int max14577_get_present(struct max14577_charger *chg, int *val)
+{
+	*val = 1;
+
+	return 0;
+}
+
+static int max14577_set_fast_charge_timer(struct max14577_charger *chg,
+		unsigned long hours)
+{
+	u8 reg_data;
+
+	switch (hours) {
+	case 5 ... 7:
+		reg_data = hours - 3;
+		break;
+	case 0:
+		/* Disable */
+		reg_data = 0x7;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for Fast-Charge Timer: %lu\n",
+				hours);
+		return -EINVAL;
+	}
+	reg_data <<= CHGCTRL1_TCHW_SHIFT;
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_REG_CHGCTRL1, CHGCTRL1_TCHW_MASK, reg_data);
+}
+
+static int max14577_init_constant_voltage(struct max14577_charger *chg,
+		unsigned int uvolt)
+{
+	u8 reg_data;
+
+	if (uvolt < MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN ||
+			uvolt > MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX)
+		return -EINVAL;
+
+	if (uvolt == 4200000)
+		reg_data = 0x0;
+	else if (uvolt == MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX)
+		reg_data = 0x1f;
+	else if (uvolt <= 4280000) {
+		unsigned int val = uvolt;
+
+		val -= MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN;
+		val /= MAXIM_CHARGER_CONSTANT_VOLTAGE_STEP;
+		if (uvolt <= 4180000)
+			reg_data = 0x1 + val;
+		else
+			reg_data = val; /* Fix for gap between 4.18V and 4.22V */
+	} else
+		return -EINVAL;
+
+	reg_data <<= CHGCTRL3_MBCCVWRC_SHIFT;
+
+	return max14577_write_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL3, reg_data);
+}
+
+static int max14577_init_eoc(struct max14577_charger *chg,
+		unsigned int uamp)
+{
+	unsigned int current_bits;
+	u8 reg_data;
+
+	switch (chg->max14577->dev_type) {
+	case MAXIM_DEVICE_TYPE_MAX77836:
+		if (uamp < 5000)
+			return -EINVAL; /* Requested current is too low */
+
+		if (uamp >= 7500 && uamp < 10000)
+			current_bits = 0x0;
+		else if (uamp <= 50000) {
+			/* <5000, 7499> and <10000, 50000> */
+			current_bits = uamp / 5000;
+		} else {
+			uamp = min(uamp, 100000U) - 50000U;
+			current_bits = 0xa + uamp / 10000;
+		}
+		break;
+
+	case MAXIM_DEVICE_TYPE_MAX14577:
+	default:
+		if (uamp < MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN)
+			return -EINVAL; /* Requested current is too low */
+
+		uamp = min(uamp, MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX);
+		uamp -= MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN;
+		current_bits = uamp / MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP;
+		break;
+	}
+
+	reg_data = current_bits << CHGCTRL5_EOCS_SHIFT;
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL5, CHGCTRL5_EOCS_MASK,
+			reg_data);
+}
+
+static int max14577_init_fast_charge(struct max14577_charger *chg,
+		unsigned int uamp)
+{
+	u8 reg_data;
+	int ret;
+	const struct maxim_charger_current *limits =
+		&maxim_charger_currents[chg->max14577->dev_type];
+
+	ret = maxim_charger_calc_reg_current(limits, uamp, uamp, &reg_data);
+	if (ret) {
+		dev_err(chg->dev, "Wrong value for fast charge: %u\n", uamp);
+		return ret;
+	}
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL4,
+			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
+			reg_data);
+}
+
+/*
+ * Sets charger registers to proper and safe default values.
+ * Some of these values are equal to defaults in MAX14577E
+ * data sheet but there are minor differences.
+ */
+static int max14577_charger_reg_init(struct max14577_charger *chg)
+{
+	struct regmap *rmap = chg->max14577->regmap;
+	u8 reg_data;
+	int ret;
+
+	/*
+	 * Charger-Type Manual Detection, default off (set CHGTYPMAN to 0)
+	 * Charger-Detection Enable, default on (set CHGDETEN to 1)
+	 * Combined mask of CHGDETEN and CHGTYPMAN will zero the CHGTYPMAN bit
+	 */
+	reg_data = 0x1 << CDETCTRL1_CHGDETEN_SHIFT;
+	max14577_update_reg(rmap, MAX14577_REG_CDETCTRL1,
+			CDETCTRL1_CHGDETEN_MASK | CDETCTRL1_CHGTYPMAN_MASK,
+			reg_data);
+
+	/*
+	 * Wall-Adapter Rapid Charge, default on
+	 * Battery-Charger, default on
+	 */
+	reg_data = 0x1 << CHGCTRL2_VCHGR_RC_SHIFT;
+	reg_data |= 0x1 << CHGCTRL2_MBCHOSTEN_SHIFT;
+	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL2, reg_data);
+
+	/* Auto Charging Stop, default off */
+	reg_data = 0x0 << CHGCTRL6_AUTOSTOP_SHIFT;
+	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL6, reg_data);
+
+	ret = max14577_init_constant_voltage(chg, chg->pdata->constant_uvolt);
+	if (ret)
+		return ret;
+
+	ret = max14577_init_eoc(chg, chg->pdata->eoc_uamp);
+	if (ret)
+		return ret;
+
+	ret = max14577_init_fast_charge(chg, chg->pdata->fast_charge_uamp);
+	if (ret)
+		return ret;
+
+	ret = max14577_set_fast_charge_timer(chg,
+			MAXIM_CHARGER_FAST_CHARGE_TIMER_DEFAULT);
+	if (ret)
+		return ret;
+
+	/* Initialize Overvoltage-Protection Threshold */
+	switch (chg->pdata->ovp_uvolt) {
+	case 7500000:
+		reg_data = 0x0;
+		break;
+	case 6000000:
+	case 6500000:
+	case 7000000:
+		reg_data = 0x1 + (chg->pdata->ovp_uvolt - 6000000) / 500000;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for OVP: %u\n",
+				chg->pdata->ovp_uvolt);
+		return -EINVAL;
+	}
+	reg_data <<= CHGCTRL7_OTPCGHCVS_SHIFT;
+	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL7, reg_data);
+
+	return 0;
+}
+
+/* Support property from charger */
+static enum power_supply_property max14577_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static const char * const model_names[] = {
+	[MAXIM_DEVICE_TYPE_UNKNOWN]	= "MAX14577-like",
+	[MAXIM_DEVICE_TYPE_MAX14577]	= "MAX14577",
+	[MAXIM_DEVICE_TYPE_MAX77836]	= "MAX77836",
+};
+static const char *manufacturer = "Maxim Integrated";
+
+static int max14577_charger_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct max14577_charger *chg = power_supply_get_drvdata(psy);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = max14577_get_charger_state(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = max14577_get_charge_type(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = max14577_get_battery_health(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = max14577_get_present(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = max14577_get_online(chg, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		BUILD_BUG_ON(ARRAY_SIZE(model_names) != MAXIM_DEVICE_TYPE_NUM);
+		val->strval = model_names[chg->max14577->dev_type];
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = manufacturer;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct power_supply_desc max14577_charger_desc = {
+	.name = "max14577-charger",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = max14577_charger_props,
+	.num_properties = ARRAY_SIZE(max14577_charger_props),
+	.get_property = max14577_charger_get_property,
+};
+
+#ifdef CONFIG_OF
+static struct max14577_charger_platform_data *max14577_charger_dt_init(
+		struct platform_device *pdev)
+{
+	struct max14577_charger_platform_data *pdata;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No charger OF node\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	ret = of_property_read_u32(np, "maxim,constant-uvolt",
+			&pdata->constant_uvolt);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,constant-uvolt field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,fast-charge-uamp",
+			&pdata->fast_charge_uamp);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,fast-charge-uamp field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,eoc-uamp", &pdata->eoc_uamp);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,eoc-uamp field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,ovp-uvolt", &pdata->ovp_uvolt);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,ovp-uvolt field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	return pdata;
+}
+#else /* CONFIG_OF */
+static struct max14577_charger_platform_data *max14577_charger_dt_init(
+		struct platform_device *pdev)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
+static ssize_t show_fast_charge_timer(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct max14577_charger *chg = dev_get_drvdata(dev);
+	u8 reg_data;
+	int ret;
+	unsigned int val;
+
+	ret = max14577_read_reg(chg->max14577->regmap, MAX14577_REG_CHGCTRL1,
+			&reg_data);
+	if (ret)
+		return ret;
+
+	reg_data &= CHGCTRL1_TCHW_MASK;
+	reg_data >>= CHGCTRL1_TCHW_SHIFT;
+	switch (reg_data) {
+	case 0x2 ... 0x4:
+		val = reg_data + 3;
+		break;
+	case 0x7:
+		val = 0;
+		break;
+	default:
+		val = 5;
+		break;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t store_fast_charge_timer(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct max14577_charger *chg = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	ret = max14577_set_fast_charge_timer(chg, val);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(fast_charge_timer, S_IRUGO | S_IWUSR,
+		show_fast_charge_timer, store_fast_charge_timer);
+
+static int max14577_charger_probe(struct platform_device *pdev)
+{
+	struct max14577_charger *chg;
+	struct power_supply_config psy_cfg = {};
+	struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
+	int ret;
+
+	chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
+	if (!chg)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, chg);
+	chg->dev = &pdev->dev;
+	chg->max14577 = max14577;
+
+	chg->pdata = max14577_charger_dt_init(pdev);
+	if (IS_ERR_OR_NULL(chg->pdata))
+		return PTR_ERR(chg->pdata);
+
+	ret = max14577_charger_reg_init(chg);
+	if (ret)
+		return ret;
+
+	ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: create sysfs entry\n");
+		return ret;
+	}
+
+	psy_cfg.drv_data = chg;
+	chg->charger = power_supply_register(&pdev->dev, &max14577_charger_desc,
+						&psy_cfg);
+	if (IS_ERR(chg->charger)) {
+		dev_err(&pdev->dev, "failed: power supply register\n");
+		ret = PTR_ERR(chg->charger);
+		goto err;
+	}
+
+	/* Check for valid values for charger */
+	BUILD_BUG_ON(MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN +
+			MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP * 0xf !=
+			MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX);
+	return 0;
+
+err:
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+	return ret;
+}
+
+static int max14577_charger_remove(struct platform_device *pdev)
+{
+	struct max14577_charger *chg = platform_get_drvdata(pdev);
+
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+	power_supply_unregister(chg->charger);
+
+	return 0;
+}
+
+static const struct platform_device_id max14577_charger_id[] = {
+	{ "max14577-charger", MAXIM_DEVICE_TYPE_MAX14577, },
+	{ "max77836-charger", MAXIM_DEVICE_TYPE_MAX77836, },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, max14577_charger_id);
+
+static const struct of_device_id of_max14577_charger_dt_match[] = {
+	{ .compatible = "maxim,max14577-charger",
+	  .data = (void *)MAXIM_DEVICE_TYPE_MAX14577, },
+	{ .compatible = "maxim,max77836-charger",
+	  .data = (void *)MAXIM_DEVICE_TYPE_MAX77836, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_max14577_charger_dt_match);
+
+static struct platform_driver max14577_charger_driver = {
+	.driver = {
+		.name	= "max14577-charger",
+		.of_match_table = of_max14577_charger_dt_match,
+	},
+	.probe		= max14577_charger_probe,
+	.remove		= max14577_charger_remove,
+	.id_table	= max14577_charger_id,
+};
+module_platform_driver(max14577_charger_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_DESCRIPTION("Maxim 14577/77836 charger driver");
+MODULE_LICENSE("GPL");