Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1294 insertions, 0 deletions

diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
new file mode 100644
index 000000000..c4a95b014
--- /dev/null
+++ b/drivers/power/supply/sbs-battery.c
@@ -0,0 +1,1294 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Gas Gauge driver for SBS Compliant Batteries
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/devm-helpers.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/of_device.h>
+#include <linux/power/sbs-battery.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+
+enum {
+	REG_MANUFACTURER_DATA,
+	REG_BATTERY_MODE,
+	REG_TEMPERATURE,
+	REG_VOLTAGE,
+	REG_CURRENT_NOW,
+	REG_CURRENT_AVG,
+	REG_MAX_ERR,
+	REG_CAPACITY,
+	REG_TIME_TO_EMPTY_NOW,
+	REG_TIME_TO_EMPTY_AVG,
+	REG_TIME_TO_FULL_AVG,
+	REG_STATUS,
+	REG_CAPACITY_LEVEL,
+	REG_CYCLE_COUNT,
+	REG_SERIAL_NUMBER,
+	REG_REMAINING_CAPACITY,
+	REG_REMAINING_CAPACITY_CHARGE,
+	REG_FULL_CHARGE_CAPACITY,
+	REG_FULL_CHARGE_CAPACITY_CHARGE,
+	REG_DESIGN_CAPACITY,
+	REG_DESIGN_CAPACITY_CHARGE,
+	REG_DESIGN_VOLTAGE_MIN,
+	REG_DESIGN_VOLTAGE_MAX,
+	REG_CHEMISTRY,
+	REG_MANUFACTURER,
+	REG_MODEL_NAME,
+	REG_CHARGE_CURRENT,
+	REG_CHARGE_VOLTAGE,
+};
+
+#define REG_ADDR_SPEC_INFO		0x1A
+#define SPEC_INFO_VERSION_MASK		GENMASK(7, 4)
+#define SPEC_INFO_VERSION_SHIFT		4
+
+#define SBS_VERSION_1_0			1
+#define SBS_VERSION_1_1			2
+#define SBS_VERSION_1_1_WITH_PEC	3
+
+#define REG_ADDR_MANUFACTURE_DATE	0x1B
+
+/* Battery Mode defines */
+#define BATTERY_MODE_OFFSET		0x03
+#define BATTERY_MODE_CAPACITY_MASK	BIT(15)
+enum sbs_capacity_mode {
+	CAPACITY_MODE_AMPS = 0,
+	CAPACITY_MODE_WATTS = BATTERY_MODE_CAPACITY_MASK
+};
+#define BATTERY_MODE_CHARGER_MASK	(1<<14)
+
+/* manufacturer access defines */
+#define MANUFACTURER_ACCESS_STATUS	0x0006
+#define MANUFACTURER_ACCESS_SLEEP	0x0011
+
+/* battery status value bits */
+#define BATTERY_INITIALIZED		0x80
+#define BATTERY_DISCHARGING		0x40
+#define BATTERY_FULL_CHARGED		0x20
+#define BATTERY_FULL_DISCHARGED		0x10
+
+/* min_value and max_value are only valid for numerical data */
+#define SBS_DATA(_psp, _addr, _min_value, _max_value) { \
+	.psp = _psp, \
+	.addr = _addr, \
+	.min_value = _min_value, \
+	.max_value = _max_value, \
+}
+
+static const struct chip_data {
+	enum power_supply_property psp;
+	u8 addr;
+	int min_value;
+	int max_value;
+} sbs_data[] = {
+	[REG_MANUFACTURER_DATA] =
+		SBS_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
+	[REG_BATTERY_MODE] =
+		SBS_DATA(-1, 0x03, 0, 65535),
+	[REG_TEMPERATURE] =
+		SBS_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
+	[REG_VOLTAGE] =
+		SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 65535),
+	[REG_CURRENT_NOW] =
+		SBS_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768, 32767),
+	[REG_CURRENT_AVG] =
+		SBS_DATA(POWER_SUPPLY_PROP_CURRENT_AVG, 0x0B, -32768, 32767),
+	[REG_MAX_ERR] =
+		SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, 0x0c, 0, 100),
+	[REG_CAPACITY] =
+		SBS_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0D, 0, 100),
+	[REG_REMAINING_CAPACITY] =
+		SBS_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535),
+	[REG_REMAINING_CAPACITY_CHARGE] =
+		SBS_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535),
+	[REG_FULL_CHARGE_CAPACITY] =
+		SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535),
+	[REG_FULL_CHARGE_CAPACITY_CHARGE] =
+		SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535),
+	[REG_TIME_TO_EMPTY_NOW] =
+		SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, 0x11, 0, 65535),
+	[REG_TIME_TO_EMPTY_AVG] =
+		SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, 65535),
+	[REG_TIME_TO_FULL_AVG] =
+		SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, 65535),
+	[REG_CHARGE_CURRENT] =
+		SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, 0x14, 0, 65535),
+	[REG_CHARGE_VOLTAGE] =
+		SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, 0x15, 0, 65535),
+	[REG_STATUS] =
+		SBS_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
+	[REG_CAPACITY_LEVEL] =
+		SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_LEVEL, 0x16, 0, 65535),
+	[REG_CYCLE_COUNT] =
+		SBS_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
+	[REG_DESIGN_CAPACITY] =
+		SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, 65535),
+	[REG_DESIGN_CAPACITY_CHARGE] =
+		SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0, 65535),
+	[REG_DESIGN_VOLTAGE_MIN] =
+		SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, 0x19, 0, 65535),
+	[REG_DESIGN_VOLTAGE_MAX] =
+		SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, 65535),
+	[REG_SERIAL_NUMBER] =
+		SBS_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
+	/* Properties of type `const char *' */
+	[REG_MANUFACTURER] =
+		SBS_DATA(POWER_SUPPLY_PROP_MANUFACTURER, 0x20, 0, 65535),
+	[REG_MODEL_NAME] =
+		SBS_DATA(POWER_SUPPLY_PROP_MODEL_NAME, 0x21, 0, 65535),
+	[REG_CHEMISTRY] =
+		SBS_DATA(POWER_SUPPLY_PROP_TECHNOLOGY, 0x22, 0, 65535)
+};
+
+static const enum power_supply_property sbs_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+	POWER_SUPPLY_PROP_SERIAL_NUMBER,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
+	POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
+	POWER_SUPPLY_PROP_MANUFACTURE_DAY,
+	/* Properties of type `const char *' */
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME
+};
+
+/* Supports special manufacturer commands from TI BQ20Z65 and BQ20Z75 IC. */
+#define SBS_FLAGS_TI_BQ20ZX5		BIT(0)
+
+static const enum power_supply_property string_properties[] = {
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+#define NR_STRING_BUFFERS	ARRAY_SIZE(string_properties)
+
+struct sbs_info {
+	struct i2c_client		*client;
+	struct power_supply		*power_supply;
+	bool				is_present;
+	struct gpio_desc		*gpio_detect;
+	bool				charger_broadcasts;
+	int				last_state;
+	int				poll_time;
+	u32				i2c_retry_count;
+	u32				poll_retry_count;
+	struct delayed_work		work;
+	struct mutex			mode_lock;
+	u32				flags;
+	int				technology;
+	char				strings[NR_STRING_BUFFERS][I2C_SMBUS_BLOCK_MAX + 1];
+};
+
+static char *sbs_get_string_buf(struct sbs_info *chip,
+				enum power_supply_property psp)
+{
+	int i = 0;
+
+	for (i = 0; i < NR_STRING_BUFFERS; i++)
+		if (string_properties[i] == psp)
+			return chip->strings[i];
+
+	return ERR_PTR(-EINVAL);
+}
+
+static void sbs_invalidate_cached_props(struct sbs_info *chip)
+{
+	int i = 0;
+
+	chip->technology = -1;
+
+	for (i = 0; i < NR_STRING_BUFFERS; i++)
+		chip->strings[i][0] = 0;
+}
+
+static bool force_load;
+
+static int sbs_read_word_data(struct i2c_client *client, u8 address);
+static int sbs_write_word_data(struct i2c_client *client, u8 address, u16 value);
+
+static void sbs_disable_charger_broadcasts(struct sbs_info *chip)
+{
+	int val = sbs_read_word_data(chip->client, BATTERY_MODE_OFFSET);
+	if (val < 0)
+		goto exit;
+
+	val |= BATTERY_MODE_CHARGER_MASK;
+
+	val = sbs_write_word_data(chip->client, BATTERY_MODE_OFFSET, val);
+
+exit:
+	if (val < 0)
+		dev_err(&chip->client->dev,
+			"Failed to disable charger broadcasting: %d\n", val);
+	else
+		dev_dbg(&chip->client->dev, "%s\n", __func__);
+}
+
+static int sbs_update_presence(struct sbs_info *chip, bool is_present)
+{
+	struct i2c_client *client = chip->client;
+	int retries = chip->i2c_retry_count;
+	s32 ret = 0;
+	u8 version;
+
+	if (chip->is_present == is_present)
+		return 0;
+
+	if (!is_present) {
+		chip->is_present = false;
+		/* Disable PEC when no device is present */
+		client->flags &= ~I2C_CLIENT_PEC;
+		sbs_invalidate_cached_props(chip);
+		return 0;
+	}
+
+	/* Check if device supports packet error checking and use it */
+	while (retries > 0) {
+		ret = i2c_smbus_read_word_data(client, REG_ADDR_SPEC_INFO);
+		if (ret >= 0)
+			break;
+
+		/*
+		 * Some batteries trigger the detection pin before the
+		 * I2C bus is properly connected. This works around the
+		 * issue.
+		 */
+		msleep(100);
+
+		retries--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev, "failed to read spec info: %d\n", ret);
+
+		/* fallback to old behaviour */
+		client->flags &= ~I2C_CLIENT_PEC;
+		chip->is_present = true;
+
+		return ret;
+	}
+
+	version = (ret & SPEC_INFO_VERSION_MASK) >> SPEC_INFO_VERSION_SHIFT;
+
+	if (version == SBS_VERSION_1_1_WITH_PEC)
+		client->flags |= I2C_CLIENT_PEC;
+	else
+		client->flags &= ~I2C_CLIENT_PEC;
+
+	if (of_device_is_compatible(client->dev.parent->of_node, "google,cros-ec-i2c-tunnel")
+	    && client->flags & I2C_CLIENT_PEC) {
+		dev_info(&client->dev, "Disabling PEC because of broken Cros-EC implementation\n");
+		client->flags &= ~I2C_CLIENT_PEC;
+	}
+
+	dev_dbg(&client->dev, "PEC: %s\n", (client->flags & I2C_CLIENT_PEC) ?
+		"enabled" : "disabled");
+
+	if (!chip->is_present && is_present && !chip->charger_broadcasts)
+		sbs_disable_charger_broadcasts(chip);
+
+	chip->is_present = true;
+
+	return 0;
+}
+
+static int sbs_read_word_data(struct i2c_client *client, u8 address)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int retries = chip->i2c_retry_count;
+	s32 ret = 0;
+
+	while (retries > 0) {
+		ret = i2c_smbus_read_word_data(client, address);
+		if (ret >= 0)
+			break;
+		retries--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev,
+			"%s: i2c read at address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int sbs_read_string_data_fallback(struct i2c_client *client, u8 address, char *values)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	s32 ret = 0, block_length = 0;
+	int retries_length, retries_block;
+	u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+
+	retries_length = chip->i2c_retry_count;
+	retries_block = chip->i2c_retry_count;
+
+	dev_warn_once(&client->dev, "I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA.\n"
+				    "Fallback method does not support PEC.\n");
+
+	/* Adapter needs to support these two functions */
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_I2C_BLOCK)){
+		return -ENODEV;
+	}
+
+	/* Get the length of block data */
+	while (retries_length > 0) {
+		ret = i2c_smbus_read_byte_data(client, address);
+		if (ret >= 0)
+			break;
+		retries_length--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev,
+			"%s: i2c read at address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+
+	/* block_length does not include NULL terminator */
+	block_length = ret;
+	if (block_length > I2C_SMBUS_BLOCK_MAX) {
+		dev_err(&client->dev,
+			"%s: Returned block_length is longer than 0x%x\n",
+			__func__, I2C_SMBUS_BLOCK_MAX);
+		return -EINVAL;
+	}
+
+	/* Get the block data */
+	while (retries_block > 0) {
+		ret = i2c_smbus_read_i2c_block_data(
+				client, address,
+				block_length + 1, block_buffer);
+		if (ret >= 0)
+			break;
+		retries_block--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev,
+			"%s: i2c read at address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+
+	/* block_buffer[0] == block_length */
+	memcpy(values, block_buffer + 1, block_length);
+	values[block_length] = '\0';
+
+	return ret;
+}
+
+static int sbs_read_string_data(struct i2c_client *client, u8 address, char *values)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int retries = chip->i2c_retry_count;
+	int ret = 0;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BLOCK_DATA)) {
+		bool pec = client->flags & I2C_CLIENT_PEC;
+		client->flags &= ~I2C_CLIENT_PEC;
+		ret = sbs_read_string_data_fallback(client, address, values);
+		if (pec)
+			client->flags |= I2C_CLIENT_PEC;
+		return ret;
+	}
+
+	while (retries > 0) {
+		ret = i2c_smbus_read_block_data(client, address, values);
+		if (ret >= 0)
+			break;
+		retries--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev, "failed to read block 0x%x: %d\n", address, ret);
+		return ret;
+	}
+
+	/* add string termination */
+	values[ret] = '\0';
+	return ret;
+}
+
+static int sbs_write_word_data(struct i2c_client *client, u8 address,
+	u16 value)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int retries = chip->i2c_retry_count;
+	s32 ret = 0;
+
+	while (retries > 0) {
+		ret = i2c_smbus_write_word_data(client, address, value);
+		if (ret >= 0)
+			break;
+		retries--;
+	}
+
+	if (ret < 0) {
+		dev_dbg(&client->dev,
+			"%s: i2c write to address 0x%x failed\n",
+			__func__, address);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sbs_status_correct(struct i2c_client *client, int *intval)
+{
+	int ret;
+
+	ret = sbs_read_word_data(client, sbs_data[REG_CURRENT_NOW].addr);
+	if (ret < 0)
+		return ret;
+
+	ret = (s16)ret;
+
+	/* Not drawing current -> not charging (i.e. idle) */
+	if (*intval != POWER_SUPPLY_STATUS_FULL && ret == 0)
+		*intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+	if (*intval == POWER_SUPPLY_STATUS_FULL) {
+		/* Drawing or providing current when full */
+		if (ret > 0)
+			*intval = POWER_SUPPLY_STATUS_CHARGING;
+		else if (ret < 0)
+			*intval = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	return 0;
+}
+
+static bool sbs_bat_needs_calibration(struct i2c_client *client)
+{
+	int ret;
+
+	ret = sbs_read_word_data(client, sbs_data[REG_BATTERY_MODE].addr);
+	if (ret < 0)
+		return false;
+
+	return !!(ret & BIT(7));
+}
+
+static int sbs_get_ti_battery_presence_and_health(
+	struct i2c_client *client, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	s32 ret;
+
+	/*
+	 * Write to ManufacturerAccess with ManufacturerAccess command
+	 * and then read the status.
+	 */
+	ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
+				  MANUFACTURER_ACCESS_STATUS);
+	if (ret < 0) {
+		if (psp == POWER_SUPPLY_PROP_PRESENT)
+			val->intval = 0; /* battery removed */
+		return ret;
+	}
+
+	ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
+	if (ret < 0) {
+		if (psp == POWER_SUPPLY_PROP_PRESENT)
+			val->intval = 0; /* battery removed */
+		return ret;
+	}
+
+	if (ret < sbs_data[REG_MANUFACTURER_DATA].min_value ||
+	    ret > sbs_data[REG_MANUFACTURER_DATA].max_value) {
+		val->intval = 0;
+		return 0;
+	}
+
+	/* Mask the upper nibble of 2nd byte and
+	 * lower byte of response then
+	 * shift the result by 8 to get status*/
+	ret &= 0x0F00;
+	ret >>= 8;
+	if (psp == POWER_SUPPLY_PROP_PRESENT) {
+		if (ret == 0x0F)
+			/* battery removed */
+			val->intval = 0;
+		else
+			val->intval = 1;
+	} else if (psp == POWER_SUPPLY_PROP_HEALTH) {
+		if (ret == 0x09)
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		else if (ret == 0x0B)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else if (ret == 0x0C)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else if (sbs_bat_needs_calibration(client))
+			val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+	}
+
+	return 0;
+}
+
+static int sbs_get_battery_presence_and_health(
+	struct i2c_client *client, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int ret;
+
+	if (chip->flags & SBS_FLAGS_TI_BQ20ZX5)
+		return sbs_get_ti_battery_presence_and_health(client, psp, val);
+
+	/* Dummy command; if it succeeds, battery is present. */
+	ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+
+	if (ret < 0) { /* battery not present*/
+		if (psp == POWER_SUPPLY_PROP_PRESENT) {
+			val->intval = 0;
+			return 0;
+		}
+		return ret;
+	}
+
+	if (psp == POWER_SUPPLY_PROP_PRESENT)
+		val->intval = 1; /* battery present */
+	else { /* POWER_SUPPLY_PROP_HEALTH */
+		if (sbs_bat_needs_calibration(client)) {
+			val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
+		} else {
+			/* SBS spec doesn't have a general health command. */
+			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		}
+	}
+
+	return 0;
+}
+
+static int sbs_get_battery_property(struct i2c_client *client,
+	int reg_offset, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	s32 ret;
+
+	ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
+	if (ret < 0)
+		return ret;
+
+	/* returned values are 16 bit */
+	if (sbs_data[reg_offset].min_value < 0)
+		ret = (s16)ret;
+
+	if (ret >= sbs_data[reg_offset].min_value &&
+	    ret <= sbs_data[reg_offset].max_value) {
+		val->intval = ret;
+		if (psp == POWER_SUPPLY_PROP_CAPACITY_LEVEL) {
+			if (!(ret & BATTERY_INITIALIZED))
+				val->intval =
+					POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+			else if (ret & BATTERY_FULL_CHARGED)
+				val->intval =
+					POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+			else if (ret & BATTERY_FULL_DISCHARGED)
+				val->intval =
+					POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+			else
+				val->intval =
+					POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+			return 0;
+		} else if (psp != POWER_SUPPLY_PROP_STATUS) {
+			return 0;
+		}
+
+		if (ret & BATTERY_FULL_CHARGED)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else if (ret & BATTERY_DISCHARGING)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+
+		sbs_status_correct(client, &val->intval);
+
+		if (chip->poll_time == 0)
+			chip->last_state = val->intval;
+		else if (chip->last_state != val->intval) {
+			cancel_delayed_work_sync(&chip->work);
+			power_supply_changed(chip->power_supply);
+			chip->poll_time = 0;
+		}
+	} else {
+		if (psp == POWER_SUPPLY_PROP_STATUS)
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+		else if (psp == POWER_SUPPLY_PROP_CAPACITY)
+			/* sbs spec says that this can be >100 %
+			 * even if max value is 100 %
+			 */
+			val->intval = min(ret, 100);
+		else
+			val->intval = 0;
+	}
+
+	return 0;
+}
+
+static int sbs_get_property_index(struct i2c_client *client,
+	enum power_supply_property psp)
+{
+	int count;
+
+	for (count = 0; count < ARRAY_SIZE(sbs_data); count++)
+		if (psp == sbs_data[count].psp)
+			return count;
+
+	dev_warn(&client->dev,
+		"%s: Invalid Property - %d\n", __func__, psp);
+
+	return -EINVAL;
+}
+
+static const char *sbs_get_constant_string(struct sbs_info *chip,
+			enum power_supply_property psp)
+{
+	int ret;
+	char *buf;
+	u8 addr;
+
+	buf = sbs_get_string_buf(chip, psp);
+	if (IS_ERR(buf))
+		return buf;
+
+	if (!buf[0]) {
+		ret = sbs_get_property_index(chip->client, psp);
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		addr = sbs_data[ret].addr;
+
+		ret = sbs_read_string_data(chip->client, addr, buf);
+		if (ret < 0)
+			return ERR_PTR(ret);
+	}
+
+	return buf;
+}
+
+static void  sbs_unit_adjustment(struct i2c_client *client,
+	enum power_supply_property psp, union power_supply_propval *val)
+{
+#define BASE_UNIT_CONVERSION		1000
+#define BATTERY_MODE_CAP_MULT_WATT	(10 * BASE_UNIT_CONVERSION)
+#define TIME_UNIT_CONVERSION		60
+#define TEMP_KELVIN_TO_CELSIUS		2731
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+		/* sbs provides energy in units of 10mWh.
+		 * Convert to µWh
+		 */
+		val->intval *= BATTERY_MODE_CAP_MULT_WATT;
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval *= BASE_UNIT_CONVERSION;
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		/* sbs provides battery temperature in 0.1K
+		 * so convert it to 0.1°C
+		 */
+		val->intval -= TEMP_KELVIN_TO_CELSIUS;
+		break;
+
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+		/* sbs provides time to empty and time to full in minutes.
+		 * Convert to seconds
+		 */
+		val->intval *= TIME_UNIT_CONVERSION;
+		break;
+
+	default:
+		dev_dbg(&client->dev,
+			"%s: no need for unit conversion %d\n", __func__, psp);
+	}
+}
+
+static enum sbs_capacity_mode sbs_set_capacity_mode(struct i2c_client *client,
+	enum sbs_capacity_mode mode)
+{
+	int ret, original_val;
+
+	original_val = sbs_read_word_data(client, BATTERY_MODE_OFFSET);
+	if (original_val < 0)
+		return original_val;
+
+	if ((original_val & BATTERY_MODE_CAPACITY_MASK) == mode)
+		return mode;
+
+	if (mode == CAPACITY_MODE_AMPS)
+		ret = original_val & ~BATTERY_MODE_CAPACITY_MASK;
+	else
+		ret = original_val | BATTERY_MODE_CAPACITY_MASK;
+
+	ret = sbs_write_word_data(client, BATTERY_MODE_OFFSET, ret);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(1000, 2000);
+
+	return original_val & BATTERY_MODE_CAPACITY_MASK;
+}
+
+static int sbs_get_battery_capacity(struct i2c_client *client,
+	int reg_offset, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	s32 ret;
+	enum sbs_capacity_mode mode = CAPACITY_MODE_WATTS;
+
+	if (power_supply_is_amp_property(psp))
+		mode = CAPACITY_MODE_AMPS;
+
+	mode = sbs_set_capacity_mode(client, mode);
+	if ((int)mode < 0)
+		return mode;
+
+	ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
+	if (ret < 0)
+		return ret;
+
+	val->intval = ret;
+
+	ret = sbs_set_capacity_mode(client, mode);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static char sbs_serial[5];
+static int sbs_get_battery_serial_number(struct i2c_client *client,
+	union power_supply_propval *val)
+{
+	int ret;
+
+	ret = sbs_read_word_data(client, sbs_data[REG_SERIAL_NUMBER].addr);
+	if (ret < 0)
+		return ret;
+
+	sprintf(sbs_serial, "%04x", ret);
+	val->strval = sbs_serial;
+
+	return 0;
+}
+
+static int sbs_get_chemistry(struct sbs_info *chip,
+		union power_supply_propval *val)
+{
+	const char *chemistry;
+
+	if (chip->technology != -1) {
+		val->intval = chip->technology;
+		return 0;
+	}
+
+	chemistry = sbs_get_constant_string(chip, POWER_SUPPLY_PROP_TECHNOLOGY);
+
+	if (IS_ERR(chemistry))
+		return PTR_ERR(chemistry);
+
+	if (!strncasecmp(chemistry, "LION", 4))
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_LION;
+	else if (!strncasecmp(chemistry, "LiP", 3))
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_LIPO;
+	else if (!strncasecmp(chemistry, "NiCd", 4))
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_NiCd;
+	else if (!strncasecmp(chemistry, "NiMH", 4))
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_NiMH;
+	else
+		chip->technology = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+
+	if (chip->technology == POWER_SUPPLY_TECHNOLOGY_UNKNOWN)
+		dev_warn(&chip->client->dev, "Unknown chemistry: %s\n", chemistry);
+
+	val->intval = chip->technology;
+
+	return 0;
+}
+
+static int sbs_get_battery_manufacture_date(struct i2c_client *client,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	int ret;
+	u16 day, month, year;
+
+	ret = sbs_read_word_data(client, REG_ADDR_MANUFACTURE_DATE);
+	if (ret < 0)
+		return ret;
+
+	day   = ret   & GENMASK(4,  0);
+	month = (ret  & GENMASK(8,  5)) >> 5;
+	year  = ((ret & GENMASK(15, 9)) >> 9) + 1980;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
+		val->intval = year;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
+		val->intval = month;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
+		val->intval = day;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sbs_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	int ret = 0;
+	struct sbs_info *chip = power_supply_get_drvdata(psy);
+	struct i2c_client *client = chip->client;
+	const char *str;
+
+	if (chip->gpio_detect) {
+		ret = gpiod_get_value_cansleep(chip->gpio_detect);
+		if (ret < 0)
+			return ret;
+		if (psp == POWER_SUPPLY_PROP_PRESENT) {
+			val->intval = ret;
+			sbs_update_presence(chip, ret);
+			return 0;
+		}
+		if (ret == 0)
+			return -ENODATA;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = sbs_get_battery_presence_and_health(client, psp, val);
+
+		/* this can only be true if no gpio is used */
+		if (psp == POWER_SUPPLY_PROP_PRESENT)
+			return 0;
+		break;
+
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		ret = sbs_get_chemistry(chip, val);
+		if (ret < 0)
+			break;
+
+		goto done; /* don't trigger power_supply_changed()! */
+
+	case POWER_SUPPLY_PROP_ENERGY_NOW:
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		ret = sbs_get_property_index(client, psp);
+		if (ret < 0)
+			break;
+
+		/* sbs_get_battery_capacity() will change the battery mode
+		 * temporarily to read the requested attribute. Ensure we stay
+		 * in the desired mode for the duration of the attribute read.
+		 */
+		mutex_lock(&chip->mode_lock);
+		ret = sbs_get_battery_capacity(client, ret, psp, val);
+		mutex_unlock(&chip->mode_lock);
+		break;
+
+	case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+		ret = sbs_get_battery_serial_number(client, val);
+		break;
+
+	case POWER_SUPPLY_PROP_STATUS:
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+	case POWER_SUPPLY_PROP_CYCLE_COUNT:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+	case POWER_SUPPLY_PROP_TEMP:
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_CAPACITY:
+	case POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN:
+		ret = sbs_get_property_index(client, psp);
+		if (ret < 0)
+			break;
+
+		ret = sbs_get_battery_property(client, ret, psp, val);
+		break;
+
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		str = sbs_get_constant_string(chip, psp);
+		if (IS_ERR(str))
+			ret = PTR_ERR(str);
+		else
+			val->strval = str;
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
+	case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
+	case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
+		ret = sbs_get_battery_manufacture_date(client, psp, val);
+		break;
+
+	default:
+		dev_err(&client->dev,
+			"%s: INVALID property\n", __func__);
+		return -EINVAL;
+	}
+
+	if (!chip->gpio_detect && chip->is_present != (ret >= 0)) {
+		bool old_present = chip->is_present;
+		union power_supply_propval val;
+		int err = sbs_get_battery_presence_and_health(
+				client, POWER_SUPPLY_PROP_PRESENT, &val);
+
+		sbs_update_presence(chip, !err && val.intval);
+
+		if (old_present != chip->is_present)
+			power_supply_changed(chip->power_supply);
+	}
+
+done:
+	if (!ret) {
+		/* Convert units to match requirements for power supply class */
+		sbs_unit_adjustment(client, psp, val);
+		dev_dbg(&client->dev,
+			"%s: property = %d, value = %x\n", __func__,
+			psp, val->intval);
+	} else if (!chip->is_present)  {
+		/* battery not present, so return NODATA for properties */
+		ret = -ENODATA;
+	}
+	return ret;
+}
+
+static void sbs_supply_changed(struct sbs_info *chip)
+{
+	struct power_supply *battery = chip->power_supply;
+	int ret;
+
+	ret = gpiod_get_value_cansleep(chip->gpio_detect);
+	if (ret < 0)
+		return;
+	sbs_update_presence(chip, ret);
+	power_supply_changed(battery);
+}
+
+static irqreturn_t sbs_irq(int irq, void *devid)
+{
+	sbs_supply_changed(devid);
+	return IRQ_HANDLED;
+}
+
+static void sbs_alert(struct i2c_client *client, enum i2c_alert_protocol prot,
+	unsigned int data)
+{
+	sbs_supply_changed(i2c_get_clientdata(client));
+}
+
+static void sbs_external_power_changed(struct power_supply *psy)
+{
+	struct sbs_info *chip = power_supply_get_drvdata(psy);
+
+	/* cancel outstanding work */
+	cancel_delayed_work_sync(&chip->work);
+
+	schedule_delayed_work(&chip->work, HZ);
+	chip->poll_time = chip->poll_retry_count;
+}
+
+static void sbs_delayed_work(struct work_struct *work)
+{
+	struct sbs_info *chip;
+	s32 ret;
+
+	chip = container_of(work, struct sbs_info, work.work);
+
+	ret = sbs_read_word_data(chip->client, sbs_data[REG_STATUS].addr);
+	/* if the read failed, give up on this work */
+	if (ret < 0) {
+		chip->poll_time = 0;
+		return;
+	}
+
+	if (ret & BATTERY_FULL_CHARGED)
+		ret = POWER_SUPPLY_STATUS_FULL;
+	else if (ret & BATTERY_DISCHARGING)
+		ret = POWER_SUPPLY_STATUS_DISCHARGING;
+	else
+		ret = POWER_SUPPLY_STATUS_CHARGING;
+
+	sbs_status_correct(chip->client, &ret);
+
+	if (chip->last_state != ret) {
+		chip->poll_time = 0;
+		power_supply_changed(chip->power_supply);
+		return;
+	}
+	if (chip->poll_time > 0) {
+		schedule_delayed_work(&chip->work, HZ);
+		chip->poll_time--;
+		return;
+	}
+}
+
+static const struct power_supply_desc sbs_default_desc = {
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = sbs_properties,
+	.num_properties = ARRAY_SIZE(sbs_properties),
+	.get_property = sbs_get_property,
+	.external_power_changed = sbs_external_power_changed,
+};
+
+static int sbs_probe(struct i2c_client *client)
+{
+	struct sbs_info *chip;
+	struct power_supply_desc *sbs_desc;
+	struct sbs_platform_data *pdata = client->dev.platform_data;
+	struct power_supply_config psy_cfg = {};
+	int rc;
+	int irq;
+
+	sbs_desc = devm_kmemdup(&client->dev, &sbs_default_desc,
+			sizeof(*sbs_desc), GFP_KERNEL);
+	if (!sbs_desc)
+		return -ENOMEM;
+
+	sbs_desc->name = devm_kasprintf(&client->dev, GFP_KERNEL, "sbs-%s",
+			dev_name(&client->dev));
+	if (!sbs_desc->name)
+		return -ENOMEM;
+
+	chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->flags = (u32)(uintptr_t)device_get_match_data(&client->dev);
+	chip->client = client;
+	psy_cfg.of_node = client->dev.of_node;
+	psy_cfg.drv_data = chip;
+	chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
+	sbs_invalidate_cached_props(chip);
+	mutex_init(&chip->mode_lock);
+
+	/* use pdata if available, fall back to DT properties,
+	 * or hardcoded defaults if not
+	 */
+	rc = device_property_read_u32(&client->dev, "sbs,i2c-retry-count",
+				      &chip->i2c_retry_count);
+	if (rc)
+		chip->i2c_retry_count = 0;
+
+	rc = device_property_read_u32(&client->dev, "sbs,poll-retry-count",
+				      &chip->poll_retry_count);
+	if (rc)
+		chip->poll_retry_count = 0;
+
+	if (pdata) {
+		chip->poll_retry_count = pdata->poll_retry_count;
+		chip->i2c_retry_count  = pdata->i2c_retry_count;
+	}
+	chip->i2c_retry_count = chip->i2c_retry_count + 1;
+
+	chip->charger_broadcasts = !device_property_read_bool(&client->dev,
+					"sbs,disable-charger-broadcasts");
+
+	chip->gpio_detect = devm_gpiod_get_optional(&client->dev,
+			"sbs,battery-detect", GPIOD_IN);
+	if (IS_ERR(chip->gpio_detect))
+		return dev_err_probe(&client->dev, PTR_ERR(chip->gpio_detect),
+				     "Failed to get gpio\n");
+
+	i2c_set_clientdata(client, chip);
+
+	if (!chip->gpio_detect)
+		goto skip_gpio;
+
+	irq = gpiod_to_irq(chip->gpio_detect);
+	if (irq <= 0) {
+		dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq);
+		goto skip_gpio;
+	}
+
+	rc = devm_request_threaded_irq(&client->dev, irq, NULL, sbs_irq,
+		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+		dev_name(&client->dev), chip);
+	if (rc) {
+		dev_warn(&client->dev, "Failed to request irq: %d\n", rc);
+		goto skip_gpio;
+	}
+
+skip_gpio:
+	/*
+	 * Before we register, we might need to make sure we can actually talk
+	 * to the battery.
+	 */
+	if (!(force_load || chip->gpio_detect)) {
+		union power_supply_propval val;
+
+		rc = sbs_get_battery_presence_and_health(
+				client, POWER_SUPPLY_PROP_PRESENT, &val);
+		if (rc < 0 || !val.intval)
+			return dev_err_probe(&client->dev, -ENODEV,
+					     "Failed to get present status\n");
+	}
+
+	rc = devm_delayed_work_autocancel(&client->dev, &chip->work,
+					  sbs_delayed_work);
+	if (rc)
+		return rc;
+
+	chip->power_supply = devm_power_supply_register(&client->dev, sbs_desc,
+						   &psy_cfg);
+	if (IS_ERR(chip->power_supply))
+		return dev_err_probe(&client->dev, PTR_ERR(chip->power_supply),
+				     "Failed to register power supply\n");
+
+	dev_info(&client->dev,
+		"%s: battery gas gauge device registered\n", client->name);
+
+	return 0;
+}
+
+#if defined CONFIG_PM_SLEEP
+
+static int sbs_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int ret;
+
+	if (chip->poll_time > 0)
+		cancel_delayed_work_sync(&chip->work);
+
+	if (chip->flags & SBS_FLAGS_TI_BQ20ZX5) {
+		/* Write to manufacturer access with sleep command. */
+		ret = sbs_write_word_data(client,
+					  sbs_data[REG_MANUFACTURER_DATA].addr,
+					  MANUFACTURER_ACCESS_SLEEP);
+		if (chip->is_present && ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL);
+#define SBS_PM_OPS (&sbs_pm_ops)
+
+#else
+#define SBS_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id sbs_id[] = {
+	{ "bq20z65", 0 },
+	{ "bq20z75", 0 },
+	{ "sbs-battery", 1 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, sbs_id);
+
+static const struct of_device_id sbs_dt_ids[] = {
+	{ .compatible = "sbs,sbs-battery" },
+	{
+		.compatible = "ti,bq20z65",
+		.data = (void *)SBS_FLAGS_TI_BQ20ZX5,
+	},
+	{
+		.compatible = "ti,bq20z75",
+		.data = (void *)SBS_FLAGS_TI_BQ20ZX5,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sbs_dt_ids);
+
+static struct i2c_driver sbs_battery_driver = {
+	.probe_new	= sbs_probe,
+	.alert		= sbs_alert,
+	.id_table	= sbs_id,
+	.driver = {
+		.name	= "sbs-battery",
+		.of_match_table = sbs_dt_ids,
+		.pm	= SBS_PM_OPS,
+	},
+};
+module_i2c_driver(sbs_battery_driver);
+
+MODULE_DESCRIPTION("SBS battery monitor driver");
+MODULE_LICENSE("GPL");
+
+module_param(force_load, bool, 0444);
+MODULE_PARM_DESC(force_load,
+		 "Attempt to load the driver even if no battery is connected");