Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 801 insertions, 0 deletions

diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
new file mode 100644
index 000000000..53f2c75cd
--- /dev/null
+++ b/drivers/regulator/act8865-regulator.c
@@ -0,0 +1,801 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * act8865-regulator.c - Voltage regulation for active-semi ACT88xx PMUs
+ *
+ * http://www.active-semi.com/products/power-management-units/act88xx/
+ *
+ * Copyright (C) 2013 Atmel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/act8865.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
+/*
+ * ACT8600 Global Register Map.
+ */
+#define ACT8600_SYS_MODE	0x00
+#define ACT8600_SYS_CTRL	0x01
+#define ACT8600_DCDC1_VSET	0x10
+#define ACT8600_DCDC1_CTRL	0x12
+#define ACT8600_DCDC2_VSET	0x20
+#define ACT8600_DCDC2_CTRL	0x22
+#define ACT8600_DCDC3_VSET	0x30
+#define ACT8600_DCDC3_CTRL	0x32
+#define ACT8600_SUDCDC4_VSET	0x40
+#define ACT8600_SUDCDC4_CTRL	0x41
+#define ACT8600_LDO5_VSET	0x50
+#define ACT8600_LDO5_CTRL	0x51
+#define ACT8600_LDO6_VSET	0x60
+#define ACT8600_LDO6_CTRL	0x61
+#define ACT8600_LDO7_VSET	0x70
+#define ACT8600_LDO7_CTRL	0x71
+#define ACT8600_LDO8_VSET	0x80
+#define ACT8600_LDO8_CTRL	0x81
+#define ACT8600_LDO910_CTRL	0x91
+#define ACT8600_APCH0		0xA1
+#define ACT8600_APCH1		0xA8
+#define ACT8600_APCH2		0xA9
+#define ACT8600_APCH_STAT	0xAA
+#define ACT8600_OTG0		0xB0
+#define ACT8600_OTG1		0xB2
+
+/*
+ * ACT8846 Global Register Map.
+ */
+#define	ACT8846_SYS0		0x00
+#define	ACT8846_SYS1		0x01
+#define	ACT8846_REG1_VSET	0x10
+#define	ACT8846_REG1_CTRL	0x12
+#define	ACT8846_REG2_VSET0	0x20
+#define	ACT8846_REG2_VSET1	0x21
+#define	ACT8846_REG2_CTRL	0x22
+#define	ACT8846_REG3_VSET0	0x30
+#define	ACT8846_REG3_VSET1	0x31
+#define	ACT8846_REG3_CTRL	0x32
+#define	ACT8846_REG4_VSET0	0x40
+#define	ACT8846_REG4_VSET1	0x41
+#define	ACT8846_REG4_CTRL	0x42
+#define	ACT8846_REG5_VSET	0x50
+#define	ACT8846_REG5_CTRL	0x51
+#define	ACT8846_REG6_VSET	0x58
+#define	ACT8846_REG6_CTRL	0x59
+#define	ACT8846_REG7_VSET	0x60
+#define	ACT8846_REG7_CTRL	0x61
+#define	ACT8846_REG8_VSET	0x68
+#define	ACT8846_REG8_CTRL	0x69
+#define	ACT8846_REG9_VSET	0x70
+#define	ACT8846_REG9_CTRL	0x71
+#define	ACT8846_REG10_VSET	0x80
+#define	ACT8846_REG10_CTRL	0x81
+#define	ACT8846_REG11_VSET	0x90
+#define	ACT8846_REG11_CTRL	0x91
+#define	ACT8846_REG12_VSET	0xa0
+#define	ACT8846_REG12_CTRL	0xa1
+#define	ACT8846_REG13_CTRL	0xb1
+#define	ACT8846_GLB_OFF_CTRL	0xc3
+#define	ACT8846_OFF_SYSMASK	0x18
+
+/*
+ * ACT8865 Global Register Map.
+ */
+#define	ACT8865_SYS_MODE	0x00
+#define	ACT8865_SYS_CTRL	0x01
+#define	ACT8865_SYS_UNLK_REGS	0x0b
+#define	ACT8865_DCDC1_VSET1	0x20
+#define	ACT8865_DCDC1_VSET2	0x21
+#define	ACT8865_DCDC1_CTRL	0x22
+#define	ACT8865_DCDC1_SUS	0x24
+#define	ACT8865_DCDC2_VSET1	0x30
+#define	ACT8865_DCDC2_VSET2	0x31
+#define	ACT8865_DCDC2_CTRL	0x32
+#define	ACT8865_DCDC2_SUS	0x34
+#define	ACT8865_DCDC3_VSET1	0x40
+#define	ACT8865_DCDC3_VSET2	0x41
+#define	ACT8865_DCDC3_CTRL	0x42
+#define	ACT8865_DCDC3_SUS	0x44
+#define	ACT8865_LDO1_VSET	0x50
+#define	ACT8865_LDO1_CTRL	0x51
+#define	ACT8865_LDO1_SUS	0x52
+#define	ACT8865_LDO2_VSET	0x54
+#define	ACT8865_LDO2_CTRL	0x55
+#define	ACT8865_LDO2_SUS	0x56
+#define	ACT8865_LDO3_VSET	0x60
+#define	ACT8865_LDO3_CTRL	0x61
+#define	ACT8865_LDO3_SUS	0x62
+#define	ACT8865_LDO4_VSET	0x64
+#define	ACT8865_LDO4_CTRL	0x65
+#define	ACT8865_LDO4_SUS	0x66
+#define	ACT8865_MSTROFF		0x20
+
+/*
+ * Field Definitions.
+ */
+#define	ACT8865_ENA		0x80	/* ON - [7] */
+#define	ACT8865_DIS		0x40	/* DIS - [6] */
+
+#define	ACT8865_VSEL_MASK	0x3F	/* VSET - [5:0] */
+
+
+#define ACT8600_LDO10_ENA		0x40	/* ON - [6] */
+#define ACT8600_SUDCDC_VSEL_MASK	0xFF	/* SUDCDC VSET - [7:0] */
+
+#define ACT8600_APCH_CHG_ACIN		BIT(7)
+#define ACT8600_APCH_CHG_USB		BIT(6)
+#define ACT8600_APCH_CSTATE0		BIT(5)
+#define ACT8600_APCH_CSTATE1		BIT(4)
+
+/*
+ * ACT8865 voltage number
+ */
+#define	ACT8865_VOLTAGE_NUM	64
+#define ACT8600_SUDCDC_VOLTAGE_NUM	256
+
+struct act8865 {
+	struct regmap *regmap;
+	int off_reg;
+	int off_mask;
+};
+
+static const struct regmap_range act8600_reg_ranges[] = {
+	regmap_reg_range(0x00, 0x01),
+	regmap_reg_range(0x10, 0x10),
+	regmap_reg_range(0x12, 0x12),
+	regmap_reg_range(0x20, 0x20),
+	regmap_reg_range(0x22, 0x22),
+	regmap_reg_range(0x30, 0x30),
+	regmap_reg_range(0x32, 0x32),
+	regmap_reg_range(0x40, 0x41),
+	regmap_reg_range(0x50, 0x51),
+	regmap_reg_range(0x60, 0x61),
+	regmap_reg_range(0x70, 0x71),
+	regmap_reg_range(0x80, 0x81),
+	regmap_reg_range(0x91, 0x91),
+	regmap_reg_range(0xA1, 0xA1),
+	regmap_reg_range(0xA8, 0xAA),
+	regmap_reg_range(0xB0, 0xB0),
+	regmap_reg_range(0xB2, 0xB2),
+	regmap_reg_range(0xC1, 0xC1),
+};
+
+static const struct regmap_range act8600_reg_ro_ranges[] = {
+	regmap_reg_range(0xAA, 0xAA),
+	regmap_reg_range(0xC1, 0xC1),
+};
+
+static const struct regmap_range act8600_reg_volatile_ranges[] = {
+	regmap_reg_range(0x00, 0x01),
+	regmap_reg_range(0x12, 0x12),
+	regmap_reg_range(0x22, 0x22),
+	regmap_reg_range(0x32, 0x32),
+	regmap_reg_range(0x41, 0x41),
+	regmap_reg_range(0x51, 0x51),
+	regmap_reg_range(0x61, 0x61),
+	regmap_reg_range(0x71, 0x71),
+	regmap_reg_range(0x81, 0x81),
+	regmap_reg_range(0xA8, 0xA8),
+	regmap_reg_range(0xAA, 0xAA),
+	regmap_reg_range(0xB0, 0xB0),
+	regmap_reg_range(0xC1, 0xC1),
+};
+
+static const struct regmap_access_table act8600_write_ranges_table = {
+	.yes_ranges	= act8600_reg_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(act8600_reg_ranges),
+	.no_ranges	= act8600_reg_ro_ranges,
+	.n_no_ranges	= ARRAY_SIZE(act8600_reg_ro_ranges),
+};
+
+static const struct regmap_access_table act8600_read_ranges_table = {
+	.yes_ranges	= act8600_reg_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(act8600_reg_ranges),
+};
+
+static const struct regmap_access_table act8600_volatile_ranges_table = {
+	.yes_ranges	= act8600_reg_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(act8600_reg_volatile_ranges),
+};
+
+static const struct regmap_config act8600_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xFF,
+	.wr_table = &act8600_write_ranges_table,
+	.rd_table = &act8600_read_ranges_table,
+	.volatile_table = &act8600_volatile_ranges_table,
+};
+
+static const struct regmap_config act8865_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct linear_range act8865_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000),
+	REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000),
+	REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000),
+};
+
+static const struct linear_range act8600_sudcdc_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0),
+	REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000),
+	REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000),
+	REGULATOR_LINEAR_RANGE(19000000, 192, 247, 400000),
+	REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
+};
+
+static int act8865_set_suspend_state(struct regulator_dev *rdev, bool enable)
+{
+	struct regmap *regmap = rdev->regmap;
+	int id = rdev->desc->id, reg, val;
+
+	switch (id) {
+	case ACT8865_ID_DCDC1:
+		reg = ACT8865_DCDC1_SUS;
+		val = 0xa8;
+		break;
+	case ACT8865_ID_DCDC2:
+		reg = ACT8865_DCDC2_SUS;
+		val = 0xa8;
+		break;
+	case ACT8865_ID_DCDC3:
+		reg = ACT8865_DCDC3_SUS;
+		val = 0xa8;
+		break;
+	case ACT8865_ID_LDO1:
+		reg = ACT8865_LDO1_SUS;
+		val = 0xe8;
+		break;
+	case ACT8865_ID_LDO2:
+		reg = ACT8865_LDO2_SUS;
+		val = 0xe8;
+		break;
+	case ACT8865_ID_LDO3:
+		reg = ACT8865_LDO3_SUS;
+		val = 0xe8;
+		break;
+	case ACT8865_ID_LDO4:
+		reg = ACT8865_LDO4_SUS;
+		val = 0xe8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (enable)
+		val |= BIT(4);
+
+	/*
+	 * Ask the PMIC to enable/disable this output when entering hibernate
+	 * mode.
+	 */
+	return regmap_write(regmap, reg, val);
+}
+
+static int act8865_set_suspend_enable(struct regulator_dev *rdev)
+{
+	return act8865_set_suspend_state(rdev, true);
+}
+
+static int act8865_set_suspend_disable(struct regulator_dev *rdev)
+{
+	return act8865_set_suspend_state(rdev, false);
+}
+
+static unsigned int act8865_of_map_mode(unsigned int mode)
+{
+	switch (mode) {
+	case ACT8865_REGULATOR_MODE_FIXED:
+		return REGULATOR_MODE_FAST;
+	case ACT8865_REGULATOR_MODE_NORMAL:
+		return REGULATOR_MODE_NORMAL;
+	case ACT8865_REGULATOR_MODE_LOWPOWER:
+		return REGULATOR_MODE_STANDBY;
+	default:
+		return REGULATOR_MODE_INVALID;
+	}
+}
+
+static int act8865_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct regmap *regmap = rdev->regmap;
+	int id = rdev_get_id(rdev);
+	int reg, val = 0;
+
+	switch (id) {
+	case ACT8865_ID_DCDC1:
+		reg = ACT8865_DCDC1_CTRL;
+		break;
+	case ACT8865_ID_DCDC2:
+		reg = ACT8865_DCDC2_CTRL;
+		break;
+	case ACT8865_ID_DCDC3:
+		reg = ACT8865_DCDC3_CTRL;
+		break;
+	case ACT8865_ID_LDO1:
+		reg = ACT8865_LDO1_CTRL;
+		break;
+	case ACT8865_ID_LDO2:
+		reg = ACT8865_LDO2_CTRL;
+		break;
+	case ACT8865_ID_LDO3:
+		reg = ACT8865_LDO3_CTRL;
+		break;
+	case ACT8865_ID_LDO4:
+		reg = ACT8865_LDO4_CTRL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+	case REGULATOR_MODE_NORMAL:
+		if (id <= ACT8865_ID_DCDC3)
+			val = BIT(5);
+		break;
+	case REGULATOR_MODE_STANDBY:
+		if (id > ACT8865_ID_DCDC3)
+			val = BIT(5);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(regmap, reg, BIT(5), val);
+}
+
+static unsigned int act8865_get_mode(struct regulator_dev *rdev)
+{
+	struct regmap *regmap = rdev->regmap;
+	int id = rdev_get_id(rdev);
+	int reg, ret, val = 0;
+
+	switch (id) {
+	case ACT8865_ID_DCDC1:
+		reg = ACT8865_DCDC1_CTRL;
+		break;
+	case ACT8865_ID_DCDC2:
+		reg = ACT8865_DCDC2_CTRL;
+		break;
+	case ACT8865_ID_DCDC3:
+		reg = ACT8865_DCDC3_CTRL;
+		break;
+	case ACT8865_ID_LDO1:
+		reg = ACT8865_LDO1_CTRL;
+		break;
+	case ACT8865_ID_LDO2:
+		reg = ACT8865_LDO2_CTRL;
+		break;
+	case ACT8865_ID_LDO3:
+		reg = ACT8865_LDO3_CTRL;
+		break;
+	case ACT8865_ID_LDO4:
+		reg = ACT8865_LDO4_CTRL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_read(regmap, reg, &val);
+	if (ret)
+		return ret;
+
+	if (id <= ACT8865_ID_DCDC3 && (val & BIT(5)))
+		return REGULATOR_MODE_FAST;
+	else if	(id > ACT8865_ID_DCDC3 && !(val & BIT(5)))
+		return REGULATOR_MODE_NORMAL;
+	else
+		return REGULATOR_MODE_STANDBY;
+}
+
+static const struct regulator_ops act8865_ops = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.set_mode		= act8865_set_mode,
+	.get_mode		= act8865_get_mode,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_suspend_enable	= act8865_set_suspend_enable,
+	.set_suspend_disable	= act8865_set_suspend_disable,
+};
+
+static const struct regulator_ops act8865_ldo_ops = {
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.set_mode		= act8865_set_mode,
+	.get_mode		= act8865_get_mode,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_suspend_enable	= act8865_set_suspend_enable,
+	.set_suspend_disable	= act8865_set_suspend_disable,
+	.set_pull_down		= regulator_set_pull_down_regmap,
+};
+
+static const struct regulator_ops act8865_fixed_ldo_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+};
+
+#define ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, _ops)	\
+	[_family##_ID_##_id] = {					\
+		.name			= _name,			\
+		.of_match		= of_match_ptr(_name),		\
+		.of_map_mode		= act8865_of_map_mode,		\
+		.regulators_node	= of_match_ptr("regulators"),	\
+		.supply_name		= _supply,			\
+		.id			= _family##_ID_##_id,		\
+		.type			= REGULATOR_VOLTAGE,		\
+		.ops			= _ops,				\
+		.n_voltages		= ACT8865_VOLTAGE_NUM,		\
+		.linear_ranges		= act8865_voltage_ranges,	\
+		.n_linear_ranges	= ARRAY_SIZE(act8865_voltage_ranges), \
+		.vsel_reg		= _family##_##_id##_##_vsel_reg, \
+		.vsel_mask		= ACT8865_VSEL_MASK,		\
+		.enable_reg		= _family##_##_id##_CTRL,	\
+		.enable_mask		= ACT8865_ENA,			\
+		.pull_down_reg		= _family##_##_id##_CTRL,	\
+		.pull_down_mask		= ACT8865_DIS,			\
+		.owner			= THIS_MODULE,			\
+	}
+
+#define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply) \
+	ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ops)
+
+#define ACT88xx_LDO(_name, _family, _id, _vsel_reg, _supply) \
+	ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ldo_ops)
+
+static const struct regulator_desc act8600_regulators[] = {
+	ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET, "vp1"),
+	ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET, "vp2"),
+	ACT88xx_REG("DCDC3", ACT8600, DCDC3, VSET, "vp3"),
+	{
+		.name = "SUDCDC_REG4",
+		.of_match = of_match_ptr("SUDCDC_REG4"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ACT8600_ID_SUDCDC4,
+		.ops = &act8865_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = ACT8600_SUDCDC_VOLTAGE_NUM,
+		.linear_ranges = act8600_sudcdc_voltage_ranges,
+		.n_linear_ranges = ARRAY_SIZE(act8600_sudcdc_voltage_ranges),
+		.vsel_reg = ACT8600_SUDCDC4_VSET,
+		.vsel_mask = ACT8600_SUDCDC_VSEL_MASK,
+		.enable_reg = ACT8600_SUDCDC4_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	ACT88xx_REG("LDO5", ACT8600, LDO5, VSET, "inl"),
+	ACT88xx_REG("LDO6", ACT8600, LDO6, VSET, "inl"),
+	ACT88xx_REG("LDO7", ACT8600, LDO7, VSET, "inl"),
+	ACT88xx_REG("LDO8", ACT8600, LDO8, VSET, "inl"),
+	{
+		.name = "LDO_REG9",
+		.of_match = of_match_ptr("LDO_REG9"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ACT8600_ID_LDO9,
+		.ops = &act8865_fixed_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 1,
+		.fixed_uV = 3300000,
+		.enable_reg = ACT8600_LDO910_CTRL,
+		.enable_mask = ACT8865_ENA,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO_REG10",
+		.of_match = of_match_ptr("LDO_REG10"),
+		.regulators_node = of_match_ptr("regulators"),
+		.id = ACT8600_ID_LDO10,
+		.ops = &act8865_fixed_ldo_ops,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 1,
+		.fixed_uV = 1200000,
+		.enable_reg = ACT8600_LDO910_CTRL,
+		.enable_mask = ACT8600_LDO10_ENA,
+		.owner = THIS_MODULE,
+	},
+};
+
+static const struct regulator_desc act8846_regulators[] = {
+	ACT88xx_REG("REG1", ACT8846, REG1, VSET, "vp1"),
+	ACT88xx_REG("REG2", ACT8846, REG2, VSET0, "vp2"),
+	ACT88xx_REG("REG3", ACT8846, REG3, VSET0, "vp3"),
+	ACT88xx_REG("REG4", ACT8846, REG4, VSET0, "vp4"),
+	ACT88xx_REG("REG5", ACT8846, REG5, VSET, "inl1"),
+	ACT88xx_REG("REG6", ACT8846, REG6, VSET, "inl1"),
+	ACT88xx_REG("REG7", ACT8846, REG7, VSET, "inl1"),
+	ACT88xx_REG("REG8", ACT8846, REG8, VSET, "inl2"),
+	ACT88xx_REG("REG9", ACT8846, REG9, VSET, "inl2"),
+	ACT88xx_REG("REG10", ACT8846, REG10, VSET, "inl3"),
+	ACT88xx_REG("REG11", ACT8846, REG11, VSET, "inl3"),
+	ACT88xx_REG("REG12", ACT8846, REG12, VSET, "inl3"),
+};
+
+static const struct regulator_desc act8865_regulators[] = {
+	ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1, "vp1"),
+	ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1, "vp2"),
+	ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1, "vp3"),
+	ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
+	ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
+	ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
+	ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
+};
+
+static const struct regulator_desc act8865_alt_regulators[] = {
+	ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"),
+	ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"),
+	ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"),
+	ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"),
+	ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"),
+	ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"),
+	ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"),
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id act8865_dt_ids[] = {
+	{ .compatible = "active-semi,act8600", .data = (void *)ACT8600 },
+	{ .compatible = "active-semi,act8846", .data = (void *)ACT8846 },
+	{ .compatible = "active-semi,act8865", .data = (void *)ACT8865 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, act8865_dt_ids);
+#endif
+
+static struct act8865_regulator_data *act8865_get_regulator_data(
+		int id, struct act8865_platform_data *pdata)
+{
+	int i;
+
+	for (i = 0; i < pdata->num_regulators; i++) {
+		if (pdata->regulators[i].id == id)
+			return &pdata->regulators[i];
+	}
+
+	return NULL;
+}
+
+static struct i2c_client *act8865_i2c_client;
+static void act8865_power_off(void)
+{
+	struct act8865 *act8865;
+
+	act8865 = i2c_get_clientdata(act8865_i2c_client);
+	regmap_write(act8865->regmap, act8865->off_reg, act8865->off_mask);
+	while (1);
+}
+
+static int act8600_charger_get_status(struct regmap *map)
+{
+	unsigned int val;
+	int ret;
+	u8 state0, state1;
+
+	ret = regmap_read(map, ACT8600_APCH_STAT, &val);
+	if (ret < 0)
+		return ret;
+
+	state0 = val & ACT8600_APCH_CSTATE0;
+	state1 = val & ACT8600_APCH_CSTATE1;
+
+	if (state0 && !state1)
+		return POWER_SUPPLY_STATUS_CHARGING;
+	if (!state0 && state1)
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+	if (!state0 && !state1)
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	return POWER_SUPPLY_STATUS_UNKNOWN;
+}
+
+static int act8600_charger_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct regmap *map = power_supply_get_drvdata(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = act8600_charger_get_status(map);
+		if (ret < 0)
+			return ret;
+
+		val->intval = ret;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property act8600_charger_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+};
+
+static const struct power_supply_desc act8600_charger_desc = {
+	.name = "act8600-charger",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.properties = act8600_charger_properties,
+	.num_properties = ARRAY_SIZE(act8600_charger_properties),
+	.get_property = act8600_charger_get_property,
+};
+
+static int act8600_charger_probe(struct device *dev, struct regmap *regmap)
+{
+	struct power_supply *charger;
+	struct power_supply_config cfg = {
+		.drv_data = regmap,
+		.of_node = dev->of_node,
+	};
+
+	charger = devm_power_supply_register(dev, &act8600_charger_desc, &cfg);
+
+	return PTR_ERR_OR_ZERO(charger);
+}
+
+static int act8865_pmic_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *i2c_id = i2c_client_get_device_id(client);
+	const struct regulator_desc *regulators;
+	struct act8865_platform_data *pdata = NULL;
+	struct device *dev = &client->dev;
+	int i, ret, num_regulators;
+	struct act8865 *act8865;
+	const struct regmap_config *regmap_config;
+	unsigned long type;
+	int off_reg, off_mask;
+	int voltage_select = 0;
+
+	if (dev->of_node) {
+		const struct of_device_id *id;
+
+		id = of_match_device(of_match_ptr(act8865_dt_ids), dev);
+		if (!id)
+			return -ENODEV;
+
+		type = (unsigned long) id->data;
+
+		voltage_select = !!of_get_property(dev->of_node,
+						   "active-semi,vsel-high",
+						   NULL);
+	} else {
+		type = i2c_id->driver_data;
+		pdata = dev_get_platdata(dev);
+	}
+
+	switch (type) {
+	case ACT8600:
+		regulators = act8600_regulators;
+		num_regulators = ARRAY_SIZE(act8600_regulators);
+		regmap_config = &act8600_regmap_config;
+		off_reg = -1;
+		off_mask = -1;
+		break;
+	case ACT8846:
+		regulators = act8846_regulators;
+		num_regulators = ARRAY_SIZE(act8846_regulators);
+		regmap_config = &act8865_regmap_config;
+		off_reg = ACT8846_GLB_OFF_CTRL;
+		off_mask = ACT8846_OFF_SYSMASK;
+		break;
+	case ACT8865:
+		if (voltage_select) {
+			regulators = act8865_alt_regulators;
+			num_regulators = ARRAY_SIZE(act8865_alt_regulators);
+		} else {
+			regulators = act8865_regulators;
+			num_regulators = ARRAY_SIZE(act8865_regulators);
+		}
+		regmap_config = &act8865_regmap_config;
+		off_reg = ACT8865_SYS_CTRL;
+		off_mask = ACT8865_MSTROFF;
+		break;
+	default:
+		dev_err(dev, "invalid device id %lu\n", type);
+		return -EINVAL;
+	}
+
+	act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL);
+	if (!act8865)
+		return -ENOMEM;
+
+	act8865->regmap = devm_regmap_init_i2c(client, regmap_config);
+	if (IS_ERR(act8865->regmap)) {
+		ret = PTR_ERR(act8865->regmap);
+		dev_err(dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	if (of_device_is_system_power_controller(dev->of_node)) {
+		if (!pm_power_off && (off_reg > 0)) {
+			act8865_i2c_client = client;
+			act8865->off_reg = off_reg;
+			act8865->off_mask = off_mask;
+			pm_power_off = act8865_power_off;
+		} else {
+			dev_err(dev, "Failed to set poweroff capability, already defined\n");
+		}
+	}
+
+	/* Finally register devices */
+	for (i = 0; i < num_regulators; i++) {
+		const struct regulator_desc *desc = &regulators[i];
+		struct regulator_config config = { };
+		struct regulator_dev *rdev;
+
+		config.dev = dev;
+		config.driver_data = act8865;
+		config.regmap = act8865->regmap;
+
+		if (pdata) {
+			struct act8865_regulator_data *rdata;
+
+			rdata = act8865_get_regulator_data(desc->id, pdata);
+			if (rdata) {
+				config.init_data = rdata->init_data;
+				config.of_node = rdata->of_node;
+			}
+		}
+
+		rdev = devm_regulator_register(dev, desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(dev, "failed to register %s\n", desc->name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	if (type == ACT8600) {
+		ret = act8600_charger_probe(dev, act8865->regmap);
+		if (ret < 0) {
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Failed to probe charger");
+			return ret;
+		}
+	}
+
+	i2c_set_clientdata(client, act8865);
+
+	/* Unlock expert registers for ACT8865. */
+	return type != ACT8865 ? 0 : regmap_write(act8865->regmap,
+						  ACT8865_SYS_UNLK_REGS, 0xef);
+}
+
+static const struct i2c_device_id act8865_ids[] = {
+	{ .name = "act8600", .driver_data = ACT8600 },
+	{ .name = "act8846", .driver_data = ACT8846 },
+	{ .name = "act8865", .driver_data = ACT8865 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, act8865_ids);
+
+static struct i2c_driver act8865_pmic_driver = {
+	.driver	= {
+		.name	= "act8865",
+	},
+	.probe_new	= act8865_pmic_probe,
+	.id_table	= act8865_ids,
+};
+
+module_i2c_driver(act8865_pmic_driver);
+
+MODULE_DESCRIPTION("active-semi act88xx voltage regulator driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL v2");