Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 366 insertions, 0 deletions

diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c
new file mode 100644
index 000000000..ba020a45f
--- /dev/null
+++ b/drivers/regulator/bd9571mwv-regulator.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ROHM BD9571MWV-M and BD9574MWF-M regulator driver
+ *
+ * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@gmail.com>
+ *
+ * Based on the TPS65086 driver
+ *
+ * NOTE: VD09 is missing
+ */
+
+#include <linux/mfd/rohm-generic.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/bd9571mwv.h>
+
+struct bd9571mwv_reg {
+	struct regmap *regmap;
+
+	/* DDR Backup Power */
+	u8 bkup_mode_cnt_keepon;	/* from "rohm,ddr-backup-power" */
+	u8 bkup_mode_cnt_saved;
+	bool bkup_mode_enabled;
+
+	/* Power switch type */
+	bool rstbmode_level;
+	bool rstbmode_pulse;
+};
+
+enum bd9571mwv_regulators { VD09, VD18, VD25, VD33, DVFS };
+
+#define BD9571MWV_REG(_name, _of, _id, _ops, _vr, _vm, _nv, _min, _step, _lmin)\
+	{							\
+		.name			= _name,		\
+		.of_match		= of_match_ptr(_of),	\
+		.regulators_node	= "regulators",		\
+		.id			= _id,			\
+		.ops			= &_ops,		\
+		.n_voltages		= _nv,			\
+		.type			= REGULATOR_VOLTAGE,	\
+		.owner			= THIS_MODULE,		\
+		.vsel_reg		= _vr,			\
+		.vsel_mask		= _vm,			\
+		.min_uV			= _min,			\
+		.uV_step		= _step,		\
+		.linear_min_sel		= _lmin,		\
+	}
+
+static int bd9571mwv_avs_get_moni_state(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, BD9571MWV_AVS_SET_MONI, &val);
+	if (ret != 0)
+		return ret;
+
+	return val & BD9571MWV_AVS_SET_MONI_MASK;
+}
+
+static int bd9571mwv_avs_set_voltage_sel_regmap(struct regulator_dev *rdev,
+						unsigned int sel)
+{
+	int ret;
+
+	ret = bd9571mwv_avs_get_moni_state(rdev);
+	if (ret < 0)
+		return ret;
+
+	return regmap_write_bits(rdev->regmap, BD9571MWV_AVS_VD09_VID(ret),
+				 rdev->desc->vsel_mask, sel);
+}
+
+static int bd9571mwv_avs_get_voltage_sel_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	int ret;
+
+	ret = bd9571mwv_avs_get_moni_state(rdev);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(rdev->regmap, BD9571MWV_AVS_VD09_VID(ret), &val);
+	if (ret != 0)
+		return ret;
+
+	val &= rdev->desc->vsel_mask;
+	val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+	return val;
+}
+
+static int bd9571mwv_reg_set_voltage_sel_regmap(struct regulator_dev *rdev,
+						unsigned int sel)
+{
+	return regmap_write_bits(rdev->regmap, BD9571MWV_DVFS_SETVID,
+				 rdev->desc->vsel_mask, sel);
+}
+
+/* Operations permitted on AVS voltage regulator */
+static const struct regulator_ops avs_ops = {
+	.set_voltage_sel	= bd9571mwv_avs_set_voltage_sel_regmap,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= bd9571mwv_avs_get_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+};
+
+/* Operations permitted on voltage regulators */
+static const struct regulator_ops reg_ops = {
+	.set_voltage_sel	= bd9571mwv_reg_set_voltage_sel_regmap,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+};
+
+/* Operations permitted on voltage monitors */
+static const struct regulator_ops vid_ops = {
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+};
+
+static const struct regulator_desc regulators[] = {
+	BD9571MWV_REG("VD09", "vd09", VD09, avs_ops, 0, 0x7f,
+		      0x6f, 600000, 10000, 0x3c),
+	BD9571MWV_REG("VD18", "vd18", VD18, vid_ops, BD9571MWV_VD18_VID, 0xf,
+		      16, 1625000, 25000, 0),
+	BD9571MWV_REG("VD25", "vd25", VD25, vid_ops, BD9571MWV_VD25_VID, 0xf,
+		      16, 2150000, 50000, 0),
+	BD9571MWV_REG("VD33", "vd33", VD33, vid_ops, BD9571MWV_VD33_VID, 0xf,
+		      11, 2800000, 100000, 0),
+	BD9571MWV_REG("DVFS", "dvfs", DVFS, reg_ops,
+		      BD9571MWV_DVFS_MONIVDAC, 0x7f,
+		      0x6f, 600000, 10000, 0x3c),
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int bd9571mwv_bkup_mode_read(struct bd9571mwv_reg *bdreg,
+				    unsigned int *mode)
+{
+	int ret;
+
+	ret = regmap_read(bdreg->regmap, BD9571MWV_BKUP_MODE_CNT, mode);
+	if (ret) {
+		dev_err(regmap_get_device(bdreg->regmap),
+			"failed to read backup mode (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bd9571mwv_bkup_mode_write(struct bd9571mwv_reg *bdreg,
+				     unsigned int mode)
+{
+	int ret;
+
+	ret = regmap_write(bdreg->regmap, BD9571MWV_BKUP_MODE_CNT, mode);
+	if (ret) {
+		dev_err(regmap_get_device(bdreg->regmap),
+			"failed to configure backup mode 0x%x (%d)\n",
+			mode, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static ssize_t backup_mode_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%s\n", bdreg->bkup_mode_enabled ? "on" : "off");
+}
+
+static ssize_t backup_mode_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+	unsigned int mode;
+	int ret;
+
+	if (!count)
+		return 0;
+
+	ret = kstrtobool(buf, &bdreg->bkup_mode_enabled);
+	if (ret)
+		return ret;
+
+	if (!bdreg->rstbmode_level)
+		return count;
+
+	/*
+	 * Configure DDR Backup Mode, to change the role of the accessory power
+	 * switch from a power switch to a wake-up switch, or vice versa
+	 */
+	ret = bd9571mwv_bkup_mode_read(bdreg, &mode);
+	if (ret)
+		return ret;
+
+	mode &= ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK;
+	if (bdreg->bkup_mode_enabled)
+		mode |= bdreg->bkup_mode_cnt_keepon;
+
+	ret = bd9571mwv_bkup_mode_write(bdreg, mode);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(backup_mode);
+
+static int bd9571mwv_suspend(struct device *dev)
+{
+	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+	unsigned int mode;
+	int ret;
+
+	if (!bdreg->bkup_mode_enabled)
+		return 0;
+
+	/* Save DDR Backup Mode */
+	ret = bd9571mwv_bkup_mode_read(bdreg, &mode);
+	if (ret)
+		return ret;
+
+	bdreg->bkup_mode_cnt_saved = mode;
+
+	if (!bdreg->rstbmode_pulse)
+		return 0;
+
+	/* Enable DDR Backup Mode */
+	mode &= ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK;
+	mode |= bdreg->bkup_mode_cnt_keepon;
+
+	if (mode != bdreg->bkup_mode_cnt_saved)
+		return bd9571mwv_bkup_mode_write(bdreg, mode);
+
+	return 0;
+}
+
+static int bd9571mwv_resume(struct device *dev)
+{
+	struct bd9571mwv_reg *bdreg = dev_get_drvdata(dev);
+
+	if (!bdreg->bkup_mode_enabled)
+		return 0;
+
+	/* Restore DDR Backup Mode */
+	return bd9571mwv_bkup_mode_write(bdreg, bdreg->bkup_mode_cnt_saved);
+}
+
+static const struct dev_pm_ops bd9571mwv_pm  = {
+	SET_SYSTEM_SLEEP_PM_OPS(bd9571mwv_suspend, bd9571mwv_resume)
+};
+
+static int bd9571mwv_regulator_remove(struct platform_device *pdev)
+{
+	device_remove_file(&pdev->dev, &dev_attr_backup_mode);
+	return 0;
+}
+#define DEV_PM_OPS	&bd9571mwv_pm
+#else
+#define DEV_PM_OPS	NULL
+#define bd9571mwv_regulator_remove	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static int bd9571mwv_regulator_probe(struct platform_device *pdev)
+{
+	struct regulator_config config = { };
+	struct bd9571mwv_reg *bdreg;
+	struct regulator_dev *rdev;
+	unsigned int val;
+	int i;
+	enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
+
+	bdreg = devm_kzalloc(&pdev->dev, sizeof(*bdreg), GFP_KERNEL);
+	if (!bdreg)
+		return -ENOMEM;
+
+	bdreg->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+
+	platform_set_drvdata(pdev, bdreg);
+
+	config.dev = &pdev->dev;
+	config.dev->of_node = pdev->dev.parent->of_node;
+	config.driver_data = bdreg;
+	config.regmap = bdreg->regmap;
+
+	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+		/* BD9574MWF supports DVFS only */
+		if (chip == ROHM_CHIP_TYPE_BD9574 && regulators[i].id != DVFS)
+			continue;
+		rdev = devm_regulator_register(&pdev->dev, &regulators[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s regulator\n",
+				regulators[i].name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	val = 0;
+	of_property_read_u32(config.dev->of_node, "rohm,ddr-backup-power", &val);
+	if (val & ~BD9571MWV_BKUP_MODE_CNT_KEEPON_MASK) {
+		dev_err(&pdev->dev, "invalid %s mode %u\n",
+			"rohm,ddr-backup-power", val);
+		return -EINVAL;
+	}
+	bdreg->bkup_mode_cnt_keepon = val;
+
+	bdreg->rstbmode_level = of_property_read_bool(config.dev->of_node,
+						      "rohm,rstbmode-level");
+	bdreg->rstbmode_pulse = of_property_read_bool(config.dev->of_node,
+						      "rohm,rstbmode-pulse");
+	if (bdreg->rstbmode_level && bdreg->rstbmode_pulse) {
+		dev_err(&pdev->dev, "only one rohm,rstbmode-* may be specified");
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_PM_SLEEP
+	if (bdreg->bkup_mode_cnt_keepon) {
+		int ret;
+
+		/*
+		 * Backup mode is enabled by default in pulse mode, but needs
+		 * explicit user setup in level mode.
+		 */
+		bdreg->bkup_mode_enabled = bdreg->rstbmode_pulse;
+
+		ret = device_create_file(&pdev->dev, &dev_attr_backup_mode);
+		if (ret)
+			return ret;
+	}
+#endif /* CONFIG_PM_SLEEP */
+
+	return 0;
+}
+
+static const struct platform_device_id bd9571mwv_regulator_id_table[] = {
+	{ "bd9571mwv-regulator", ROHM_CHIP_TYPE_BD9571 },
+	{ "bd9574mwf-regulator", ROHM_CHIP_TYPE_BD9574 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, bd9571mwv_regulator_id_table);
+
+static struct platform_driver bd9571mwv_regulator_driver = {
+	.driver = {
+		.name = "bd9571mwv-regulator",
+		.pm = DEV_PM_OPS,
+	},
+	.probe = bd9571mwv_regulator_probe,
+	.remove = bd9571mwv_regulator_remove,
+	.id_table = bd9571mwv_regulator_id_table,
+};
+module_platform_driver(bd9571mwv_regulator_driver);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut+renesas@gmail.com>");
+MODULE_DESCRIPTION("BD9571MWV Regulator driver");
+MODULE_LICENSE("GPL v2");