Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 565 insertions, 0 deletions

diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
new file mode 100644
index 000000000..00828f5ba
--- /dev/null
+++ b/drivers/regulator/da9211-regulator.c
@@ -0,0 +1,565 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// da9211-regulator.c - Regulator device driver for DA9211/DA9212
+// /DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
+// Copyright (C) 2015  Dialog Semiconductor Ltd.
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/da9211.h>
+#include <dt-bindings/regulator/dlg,da9211-regulator.h>
+#include "da9211-regulator.h"
+
+/* DEVICE IDs */
+#define DA9211_DEVICE_ID	0x22
+#define DA9213_DEVICE_ID	0x23
+#define DA9215_DEVICE_ID	0x24
+
+/* DA9211 REGULATOR IDs */
+#define DA9211_ID_BUCKA	0
+#define DA9211_ID_BUCKB	1
+
+struct da9211 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct da9211_pdata *pdata;
+	struct regulator_dev *rdev[DA9211_MAX_REGULATORS];
+	int num_regulator;
+	int chip_irq;
+	int chip_id;
+};
+
+static const struct regmap_range_cfg da9211_regmap_range[] = {
+	{
+		.selector_reg = DA9211_REG_PAGE_CON,
+		.selector_mask  = DA9211_REG_PAGE_MASK,
+		.selector_shift = DA9211_REG_PAGE_SHIFT,
+		.window_start = 0,
+		.window_len = 256,
+		.range_min = 0,
+		.range_max = 5*128,
+	},
+};
+
+static bool da9211_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case DA9211_REG_STATUS_A:
+	case DA9211_REG_STATUS_B:
+	case DA9211_REG_EVENT_A:
+	case DA9211_REG_EVENT_B:
+		return true;
+	}
+	return false;
+}
+
+static const struct regmap_config da9211_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 5 * 128,
+	.volatile_reg = da9211_volatile_reg,
+	.cache_type = REGCACHE_RBTREE,
+	.ranges = da9211_regmap_range,
+	.num_ranges = ARRAY_SIZE(da9211_regmap_range),
+};
+
+/* Default limits measured in millivolts and milliamps */
+#define DA9211_MIN_MV		300
+#define DA9211_MAX_MV		1570
+#define DA9211_STEP_MV		10
+
+/* Current limits for DA9211 buck (uA) indices
+ * corresponds with register values
+ */
+static const int da9211_current_limits[] = {
+	2000000, 2200000, 2400000, 2600000, 2800000, 3000000, 3200000, 3400000,
+	3600000, 3800000, 4000000, 4200000, 4400000, 4600000, 4800000, 5000000
+};
+/* Current limits for DA9213 buck (uA) indices
+ * corresponds with register values
+ */
+static const int da9213_current_limits[] = {
+	3000000, 3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000,
+	4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000
+};
+/* Current limits for DA9215 buck (uA) indices
+ * corresponds with register values
+ */
+static const int da9215_current_limits[] = {
+	4000000, 4200000, 4400000, 4600000, 4800000, 5000000, 5200000, 5400000,
+	5600000, 5800000, 6000000, 6200000, 6400000, 6600000, 6800000, 7000000
+};
+
+static unsigned int da9211_map_buck_mode(unsigned int mode)
+{
+	switch (mode) {
+	case DA9211_BUCK_MODE_SLEEP:
+		return REGULATOR_MODE_STANDBY;
+	case DA9211_BUCK_MODE_SYNC:
+		return REGULATOR_MODE_FAST;
+	case DA9211_BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	default:
+		return REGULATOR_MODE_INVALID;
+	}
+}
+
+static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev)
+{
+	int id = rdev_get_id(rdev);
+	struct da9211 *chip = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret, mode = 0;
+
+	ret = regmap_read(chip->regmap, DA9211_REG_BUCKA_CONF+id, &data);
+	if (ret < 0)
+		return ret;
+
+	switch (data & 0x03) {
+	case DA9211_BUCK_MODE_SYNC:
+		mode = REGULATOR_MODE_FAST;
+		break;
+	case DA9211_BUCK_MODE_AUTO:
+		mode = REGULATOR_MODE_NORMAL;
+		break;
+	case DA9211_BUCK_MODE_SLEEP:
+		mode = REGULATOR_MODE_STANDBY;
+		break;
+	}
+
+	return mode;
+}
+
+static int da9211_buck_set_mode(struct regulator_dev *rdev,
+					unsigned int mode)
+{
+	int id = rdev_get_id(rdev);
+	struct da9211 *chip = rdev_get_drvdata(rdev);
+	int val = 0;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = DA9211_BUCK_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = DA9211_BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = DA9211_BUCK_MODE_SLEEP;
+		break;
+	}
+
+	return regmap_update_bits(chip->regmap, DA9211_REG_BUCKA_CONF+id,
+					0x03, val);
+}
+
+static int da9211_set_current_limit(struct regulator_dev *rdev, int min,
+				    int max)
+{
+	int id = rdev_get_id(rdev);
+	struct da9211 *chip = rdev_get_drvdata(rdev);
+	int i, max_size;
+	const int *current_limits;
+
+	switch (chip->chip_id) {
+	case DA9211:
+		current_limits = da9211_current_limits;
+		max_size = ARRAY_SIZE(da9211_current_limits)-1;
+		break;
+	case DA9213:
+		current_limits = da9213_current_limits;
+		max_size = ARRAY_SIZE(da9213_current_limits)-1;
+		break;
+	case DA9215:
+		current_limits = da9215_current_limits;
+		max_size = ARRAY_SIZE(da9215_current_limits)-1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* search for closest to maximum */
+	for (i = max_size; i >= 0; i--) {
+		if (min <= current_limits[i] &&
+		    max >= current_limits[i]) {
+				return regmap_update_bits(chip->regmap,
+					DA9211_REG_BUCK_ILIM,
+					(0x0F << id*4), (i << id*4));
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int da9211_get_current_limit(struct regulator_dev *rdev)
+{
+	int id = rdev_get_id(rdev);
+	struct da9211 *chip = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret;
+	const int *current_limits;
+
+	switch (chip->chip_id) {
+	case DA9211:
+		current_limits = da9211_current_limits;
+		break;
+	case DA9213:
+		current_limits = da9213_current_limits;
+		break;
+	case DA9215:
+		current_limits = da9215_current_limits;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_read(chip->regmap, DA9211_REG_BUCK_ILIM, &data);
+	if (ret < 0)
+		return ret;
+
+	/* select one of 16 values: 0000 (2000mA or 3000mA)
+	 * to 1111 (5000mA or 6000mA).
+	 */
+	data = (data >> id*4) & 0x0F;
+	return current_limits[data];
+}
+
+static const struct regulator_ops da9211_buck_ops = {
+	.get_mode = da9211_buck_get_mode,
+	.set_mode = da9211_buck_set_mode,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_current_limit = da9211_set_current_limit,
+	.get_current_limit = da9211_get_current_limit,
+};
+
+#define DA9211_BUCK(_id) \
+{\
+	.name = #_id,\
+	.ops = &da9211_buck_ops,\
+	.type = REGULATOR_VOLTAGE,\
+	.id = DA9211_ID_##_id,\
+	.n_voltages = (DA9211_MAX_MV - DA9211_MIN_MV) / DA9211_STEP_MV + 1,\
+	.min_uV = (DA9211_MIN_MV * 1000),\
+	.uV_step = (DA9211_STEP_MV * 1000),\
+	.enable_reg = DA9211_REG_BUCKA_CONT + DA9211_ID_##_id,\
+	.enable_mask = DA9211_BUCKA_EN,\
+	.vsel_reg = DA9211_REG_VBUCKA_A + DA9211_ID_##_id * 2,\
+	.vsel_mask = DA9211_VBUCK_MASK,\
+	.owner = THIS_MODULE,\
+	.of_map_mode = da9211_map_buck_mode,\
+}
+
+static struct regulator_desc da9211_regulators[] = {
+	DA9211_BUCK(BUCKA),
+	DA9211_BUCK(BUCKB),
+};
+
+#ifdef CONFIG_OF
+static struct of_regulator_match da9211_matches[] = {
+	[DA9211_ID_BUCKA] = {
+		.name = "BUCKA",
+		.desc = &da9211_regulators[DA9211_ID_BUCKA],
+	},
+	[DA9211_ID_BUCKB] = {
+		.name = "BUCKB",
+		.desc = &da9211_regulators[DA9211_ID_BUCKB],
+	},
+	};
+
+static struct da9211_pdata *da9211_parse_regulators_dt(
+		struct device *dev)
+{
+	struct da9211_pdata *pdata;
+	struct device_node *node;
+	int i, num, n;
+
+	node = of_get_child_by_name(dev->of_node, "regulators");
+	if (!node) {
+		dev_err(dev, "regulators node not found\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	num = of_regulator_match(dev, node, da9211_matches,
+				 ARRAY_SIZE(da9211_matches));
+	of_node_put(node);
+	if (num < 0) {
+		dev_err(dev, "Failed to match regulators\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->num_buck = num;
+
+	n = 0;
+	for (i = 0; i < ARRAY_SIZE(da9211_matches); i++) {
+		if (!da9211_matches[i].init_data)
+			continue;
+
+		pdata->init_data[n] = da9211_matches[i].init_data;
+		pdata->reg_node[n] = da9211_matches[i].of_node;
+		pdata->gpiod_ren[n] = devm_fwnode_gpiod_get(dev,
+					of_fwnode_handle(pdata->reg_node[n]),
+					"enable",
+					GPIOD_OUT_HIGH |
+						GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+					"da9211-enable");
+		if (IS_ERR(pdata->gpiod_ren[n]))
+			pdata->gpiod_ren[n] = NULL;
+		n++;
+	}
+
+	return pdata;
+}
+#else
+static struct da9211_pdata *da9211_parse_regulators_dt(
+		struct device *dev)
+{
+	return ERR_PTR(-ENODEV);
+}
+#endif
+
+static irqreturn_t da9211_irq_handler(int irq, void *data)
+{
+	struct da9211 *chip = data;
+	int reg_val, err, ret = IRQ_NONE;
+
+	err = regmap_read(chip->regmap, DA9211_REG_EVENT_B, &reg_val);
+	if (err < 0)
+		goto error_i2c;
+
+	if (reg_val & DA9211_E_OV_CURR_A) {
+		regulator_notifier_call_chain(chip->rdev[0],
+			REGULATOR_EVENT_OVER_CURRENT, NULL);
+
+		err = regmap_write(chip->regmap, DA9211_REG_EVENT_B,
+			DA9211_E_OV_CURR_A);
+		if (err < 0)
+			goto error_i2c;
+
+		ret = IRQ_HANDLED;
+	}
+
+	if (reg_val & DA9211_E_OV_CURR_B) {
+		regulator_notifier_call_chain(chip->rdev[1],
+			REGULATOR_EVENT_OVER_CURRENT, NULL);
+
+		err = regmap_write(chip->regmap, DA9211_REG_EVENT_B,
+			DA9211_E_OV_CURR_B);
+		if (err < 0)
+			goto error_i2c;
+
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+
+error_i2c:
+	dev_err(chip->dev, "I2C error : %d\n", err);
+	return IRQ_NONE;
+}
+
+static int da9211_regulator_init(struct da9211 *chip)
+{
+	struct regulator_config config = { };
+	int i, ret;
+	unsigned int data;
+
+	ret = regmap_read(chip->regmap, DA9211_REG_CONFIG_E, &data);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to read CONFIG_E reg: %d\n", ret);
+		return ret;
+	}
+
+	data &= DA9211_SLAVE_SEL;
+	/* If configuration for 1/2 bucks is different between platform data
+	 * and the register, driver should exit.
+	 */
+	if (chip->pdata->num_buck == 1 && data == 0x00)
+		chip->num_regulator = 1;
+	else if (chip->pdata->num_buck == 2 && data != 0x00)
+		chip->num_regulator = 2;
+	else {
+		dev_err(chip->dev, "Configuration is mismatched\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < chip->num_regulator; i++) {
+		config.init_data = chip->pdata->init_data[i];
+		config.dev = chip->dev;
+		config.driver_data = chip;
+		config.regmap = chip->regmap;
+		config.of_node = chip->pdata->reg_node[i];
+
+		if (chip->pdata->gpiod_ren[i])
+			config.ena_gpiod = chip->pdata->gpiod_ren[i];
+		else
+			config.ena_gpiod = NULL;
+
+		/*
+		 * Hand the GPIO descriptor management over to the regulator
+		 * core, remove it from GPIO devres management.
+		 */
+		if (config.ena_gpiod)
+			devm_gpiod_unhinge(chip->dev, config.ena_gpiod);
+		chip->rdev[i] = devm_regulator_register(chip->dev,
+			&da9211_regulators[i], &config);
+		if (IS_ERR(chip->rdev[i])) {
+			dev_err(chip->dev,
+				"Failed to register DA9211 regulator\n");
+			return PTR_ERR(chip->rdev[i]);
+		}
+
+		if (chip->chip_irq != 0) {
+			ret = regmap_update_bits(chip->regmap,
+				DA9211_REG_MASK_B, DA9211_M_OV_CURR_A << i, 0);
+			if (ret < 0) {
+				dev_err(chip->dev,
+					"Failed to update mask reg: %d\n", ret);
+				return ret;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * I2C driver interface functions
+ */
+static int da9211_i2c_probe(struct i2c_client *i2c)
+{
+	struct da9211 *chip;
+	int error, ret;
+	unsigned int data;
+
+	chip = devm_kzalloc(&i2c->dev, sizeof(struct da9211), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &i2c->dev;
+	chip->regmap = devm_regmap_init_i2c(i2c, &da9211_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		error = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "Failed to allocate register map: %d\n",
+			error);
+		return error;
+	}
+
+	i2c_set_clientdata(i2c, chip);
+
+	chip->pdata = i2c->dev.platform_data;
+
+	ret = regmap_read(chip->regmap, DA9211_REG_DEVICE_ID, &data);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to read DEVICE_ID reg: %d\n", ret);
+		return ret;
+	}
+
+	switch (data) {
+	case DA9211_DEVICE_ID:
+		chip->chip_id = DA9211;
+		break;
+	case DA9213_DEVICE_ID:
+		chip->chip_id = DA9213;
+		break;
+	case DA9215_DEVICE_ID:
+		chip->chip_id = DA9215;
+		break;
+	default:
+		dev_err(chip->dev, "Unsupported device id = 0x%x.\n", data);
+		return -ENODEV;
+	}
+
+	if (!chip->pdata)
+		chip->pdata = da9211_parse_regulators_dt(chip->dev);
+
+	if (IS_ERR(chip->pdata)) {
+		dev_err(chip->dev, "No regulators defined for the platform\n");
+		return PTR_ERR(chip->pdata);
+	}
+
+	chip->chip_irq = i2c->irq;
+
+	ret = da9211_regulator_init(chip);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to initialize regulator: %d\n", ret);
+		return ret;
+	}
+
+	if (chip->chip_irq != 0) {
+		ret = devm_request_threaded_irq(chip->dev, chip->chip_irq, NULL,
+					da9211_irq_handler,
+					IRQF_TRIGGER_LOW|IRQF_ONESHOT,
+					"da9211", chip);
+		if (ret != 0) {
+			dev_err(chip->dev, "Failed to request IRQ: %d\n",
+				chip->chip_irq);
+			return ret;
+		}
+	} else {
+		dev_warn(chip->dev, "No IRQ configured\n");
+	}
+
+	return ret;
+}
+
+static const struct i2c_device_id da9211_i2c_id[] = {
+	{"da9211", DA9211},
+	{"da9212", DA9212},
+	{"da9213", DA9213},
+	{"da9223", DA9223},
+	{"da9214", DA9214},
+	{"da9224", DA9224},
+	{"da9215", DA9215},
+	{"da9225", DA9225},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id da9211_dt_ids[] = {
+	{ .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
+	{ .compatible = "dlg,da9212", .data = &da9211_i2c_id[1] },
+	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[2] },
+	{ .compatible = "dlg,da9223", .data = &da9211_i2c_id[3] },
+	{ .compatible = "dlg,da9214", .data = &da9211_i2c_id[4] },
+	{ .compatible = "dlg,da9224", .data = &da9211_i2c_id[5] },
+	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[6] },
+	{ .compatible = "dlg,da9225", .data = &da9211_i2c_id[7] },
+	{},
+};
+MODULE_DEVICE_TABLE(of, da9211_dt_ids);
+#endif
+
+static struct i2c_driver da9211_regulator_driver = {
+	.driver = {
+		.name = "da9211",
+		.of_match_table = of_match_ptr(da9211_dt_ids),
+	},
+	.probe_new = da9211_i2c_probe,
+	.id_table = da9211_i2c_id,
+};
+
+module_i2c_driver(da9211_regulator_driver);
+
+MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
+MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator driver");
+MODULE_LICENSE("GPL");