Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 968 insertions, 0 deletions

diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
new file mode 100644
index 000000000..ad2237a95
--- /dev/null
+++ b/drivers/regulator/helpers.c
@@ -0,0 +1,968 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// helpers.c  --  Voltage/Current Regulator framework helper functions.
+//
+// Copyright 2007, 2008 Wolfson Microelectronics PLC.
+// Copyright 2008 SlimLogic Ltd.
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/module.h>
+
+#include "internal.h"
+
+/**
+ * regulator_is_enabled_regmap - standard is_enabled() for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their descriptor and then use
+ * this as their is_enabled operation, saving some code.
+ */
+int regulator_is_enabled_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	val &= rdev->desc->enable_mask;
+
+	if (rdev->desc->enable_is_inverted) {
+		if (rdev->desc->enable_val)
+			return val != rdev->desc->enable_val;
+		return val == 0;
+	} else {
+		if (rdev->desc->enable_val)
+			return val == rdev->desc->enable_val;
+		return val != 0;
+	}
+}
+EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
+
+/**
+ * regulator_enable_regmap - standard enable() for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their descriptor and then use
+ * this as their enable() operation, saving some code.
+ */
+int regulator_enable_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+
+	if (rdev->desc->enable_is_inverted) {
+		val = rdev->desc->disable_val;
+	} else {
+		val = rdev->desc->enable_val;
+		if (!val)
+			val = rdev->desc->enable_mask;
+	}
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+				  rdev->desc->enable_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_enable_regmap);
+
+/**
+ * regulator_disable_regmap - standard disable() for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * enable_reg and enable_mask fields in their descriptor and then use
+ * this as their disable() operation, saving some code.
+ */
+int regulator_disable_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+
+	if (rdev->desc->enable_is_inverted) {
+		val = rdev->desc->enable_val;
+		if (!val)
+			val = rdev->desc->enable_mask;
+	} else {
+		val = rdev->desc->disable_val;
+	}
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+				  rdev->desc->enable_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_disable_regmap);
+
+static int regulator_range_selector_to_index(struct regulator_dev *rdev,
+					     unsigned int rval)
+{
+	int i;
+
+	if (!rdev->desc->linear_range_selectors)
+		return -EINVAL;
+
+	rval &= rdev->desc->vsel_range_mask;
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		if (rdev->desc->linear_range_selectors[i] == rval)
+			return i;
+	}
+	return -EINVAL;
+}
+
+/**
+ * regulator_get_voltage_sel_pickable_regmap - pickable range get_voltage_sel
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O and use pickable
+ * ranges can set the vsel_reg, vsel_mask, vsel_range_reg and vsel_range_mask
+ * fields in their descriptor and then use this as their get_voltage_vsel
+ * operation, saving some code.
+ */
+int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev)
+{
+	unsigned int r_val;
+	int range;
+	unsigned int val;
+	int ret;
+	unsigned int voltages = 0;
+	const struct linear_range *r = rdev->desc->linear_ranges;
+
+	if (!r)
+		return -EINVAL;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->vsel_range_reg, &r_val);
+	if (ret != 0)
+		return ret;
+
+	val &= rdev->desc->vsel_mask;
+	val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+	range = regulator_range_selector_to_index(rdev, r_val);
+	if (range < 0)
+		return -EINVAL;
+
+	voltages = linear_range_values_in_range_array(r, range);
+
+	return val + voltages;
+}
+EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_pickable_regmap);
+
+/**
+ * regulator_set_voltage_sel_pickable_regmap - pickable range set_voltage_sel
+ *
+ * @rdev: regulator to operate on
+ * @sel: Selector to set
+ *
+ * Regulators that use regmap for their register I/O and use pickable
+ * ranges can set the vsel_reg, vsel_mask, vsel_range_reg and vsel_range_mask
+ * fields in their descriptor and then use this as their set_voltage_vsel
+ * operation, saving some code.
+ */
+int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev,
+					      unsigned int sel)
+{
+	unsigned int range;
+	int ret, i;
+	unsigned int voltages_in_range = 0;
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		const struct linear_range *r;
+
+		r = &rdev->desc->linear_ranges[i];
+		voltages_in_range = linear_range_values_in_range(r);
+
+		if (sel < voltages_in_range)
+			break;
+		sel -= voltages_in_range;
+	}
+
+	if (i == rdev->desc->n_linear_ranges)
+		return -EINVAL;
+
+	sel <<= ffs(rdev->desc->vsel_mask) - 1;
+	sel += rdev->desc->linear_ranges[i].min_sel;
+
+	range = rdev->desc->linear_range_selectors[i];
+
+	if (rdev->desc->vsel_reg == rdev->desc->vsel_range_reg) {
+		ret = regmap_update_bits(rdev->regmap,
+					 rdev->desc->vsel_reg,
+					 rdev->desc->vsel_range_mask |
+					 rdev->desc->vsel_mask, sel | range);
+	} else {
+		ret = regmap_update_bits(rdev->regmap,
+					 rdev->desc->vsel_range_reg,
+					 rdev->desc->vsel_range_mask, range);
+		if (ret)
+			return ret;
+
+		ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
+				  rdev->desc->vsel_mask, sel);
+	}
+
+	if (ret)
+		return ret;
+
+	if (rdev->desc->apply_bit)
+		ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
+					 rdev->desc->apply_bit,
+					 rdev->desc->apply_bit);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_pickable_regmap);
+
+/**
+ * regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * vsel_reg and vsel_mask fields in their descriptor and then use this
+ * as their get_voltage_vsel operation, saving some code.
+ */
+int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	val &= rdev->desc->vsel_mask;
+	val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);
+
+/**
+ * regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users
+ *
+ * @rdev: regulator to operate on
+ * @sel: Selector to set
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * vsel_reg and vsel_mask fields in their descriptor and then use this
+ * as their set_voltage_vsel operation, saving some code.
+ */
+int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
+{
+	int ret;
+
+	sel <<= ffs(rdev->desc->vsel_mask) - 1;
+
+	ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
+				  rdev->desc->vsel_mask, sel);
+	if (ret)
+		return ret;
+
+	if (rdev->desc->apply_bit)
+		ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
+					 rdev->desc->apply_bit,
+					 rdev->desc->apply_bit);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);
+
+/**
+ * regulator_map_voltage_iterate - map_voltage() based on list_voltage()
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers implementing set_voltage_sel() and list_voltage() can use
+ * this as their map_voltage() operation.  It will find a suitable
+ * voltage by calling list_voltage() until it gets something in bounds
+ * for the requested voltages.
+ */
+int regulator_map_voltage_iterate(struct regulator_dev *rdev,
+				  int min_uV, int max_uV)
+{
+	int best_val = INT_MAX;
+	int selector = 0;
+	int i, ret;
+
+	/* Find the smallest voltage that falls within the specified
+	 * range.
+	 */
+	for (i = 0; i < rdev->desc->n_voltages; i++) {
+		ret = rdev->desc->ops->list_voltage(rdev, i);
+		if (ret < 0)
+			continue;
+
+		if (ret < best_val && ret >= min_uV && ret <= max_uV) {
+			best_val = ret;
+			selector = i;
+		}
+	}
+
+	if (best_val != INT_MAX)
+		return selector;
+	else
+		return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate);
+
+/**
+ * regulator_map_voltage_ascend - map_voltage() for ascendant voltage list
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers that have ascendant voltage list can use this as their
+ * map_voltage() operation.
+ */
+int regulator_map_voltage_ascend(struct regulator_dev *rdev,
+				 int min_uV, int max_uV)
+{
+	int i, ret;
+
+	for (i = 0; i < rdev->desc->n_voltages; i++) {
+		ret = rdev->desc->ops->list_voltage(rdev, i);
+		if (ret < 0)
+			continue;
+
+		if (ret > max_uV)
+			break;
+
+		if (ret >= min_uV && ret <= max_uV)
+			return i;
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_ascend);
+
+/**
+ * regulator_map_voltage_linear - map_voltage() for simple linear mappings
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers providing min_uV and uV_step in their regulator_desc can
+ * use this as their map_voltage() operation.
+ */
+int regulator_map_voltage_linear(struct regulator_dev *rdev,
+				 int min_uV, int max_uV)
+{
+	int ret, voltage;
+
+	/* Allow uV_step to be 0 for fixed voltage */
+	if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) {
+		if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV)
+			return 0;
+		else
+			return -EINVAL;
+	}
+
+	if (!rdev->desc->uV_step) {
+		BUG_ON(!rdev->desc->uV_step);
+		return -EINVAL;
+	}
+
+	if (min_uV < rdev->desc->min_uV)
+		min_uV = rdev->desc->min_uV;
+
+	ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
+	if (ret < 0)
+		return ret;
+
+	ret += rdev->desc->linear_min_sel;
+
+	/* Map back into a voltage to verify we're still in bounds */
+	voltage = rdev->desc->ops->list_voltage(rdev, ret);
+	if (voltage < min_uV || voltage > max_uV)
+		return -EINVAL;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);
+
+/**
+ * regulator_map_voltage_linear_range - map_voltage() for multiple linear ranges
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers providing linear_ranges in their descriptor can use this as
+ * their map_voltage() callback.
+ */
+int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
+				       int min_uV, int max_uV)
+{
+	const struct linear_range *range;
+	int ret = -EINVAL;
+	unsigned int sel;
+	bool found;
+	int voltage, i;
+
+	if (!rdev->desc->n_linear_ranges) {
+		BUG_ON(!rdev->desc->n_linear_ranges);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		range = &rdev->desc->linear_ranges[i];
+
+		ret = linear_range_get_selector_high(range, min_uV, &sel,
+						     &found);
+		if (ret)
+			continue;
+		ret = sel;
+
+		/*
+		 * Map back into a voltage to verify we're still in bounds.
+		 * If we are not, then continue checking rest of the ranges.
+		 */
+		voltage = rdev->desc->ops->list_voltage(rdev, sel);
+		if (voltage >= min_uV && voltage <= max_uV)
+			break;
+	}
+
+	if (i == rdev->desc->n_linear_ranges)
+		return -EINVAL;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);
+
+/**
+ * regulator_map_voltage_pickable_linear_range - map_voltage, pickable ranges
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers providing pickable linear_ranges in their descriptor can use
+ * this as their map_voltage() callback.
+ */
+int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
+						int min_uV, int max_uV)
+{
+	const struct linear_range *range;
+	int ret = -EINVAL;
+	int voltage, i;
+	unsigned int selector = 0;
+
+	if (!rdev->desc->n_linear_ranges) {
+		BUG_ON(!rdev->desc->n_linear_ranges);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		int linear_max_uV;
+		bool found;
+		unsigned int sel;
+
+		range = &rdev->desc->linear_ranges[i];
+		linear_max_uV = linear_range_get_max_value(range);
+
+		if (!(min_uV <= linear_max_uV && max_uV >= range->min)) {
+			selector += linear_range_values_in_range(range);
+			continue;
+		}
+
+		ret = linear_range_get_selector_high(range, min_uV, &sel,
+						     &found);
+		if (ret) {
+			selector += linear_range_values_in_range(range);
+			continue;
+		}
+
+		ret = selector + sel - range->min_sel;
+
+		voltage = rdev->desc->ops->list_voltage(rdev, ret);
+
+		/*
+		 * Map back into a voltage to verify we're still in bounds.
+		 * We may have overlapping voltage ranges. Hence we don't
+		 * exit but retry until we have checked all ranges.
+		 */
+		if (voltage < min_uV || voltage > max_uV)
+			selector += linear_range_values_in_range(range);
+		else
+			break;
+	}
+
+	if (i == rdev->desc->n_linear_ranges)
+		return -EINVAL;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range);
+
+/**
+ * regulator_desc_list_voltage_linear - List voltages with simple calculation
+ *
+ * @desc: Regulator desc for regulator which volatges are to be listed
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with a simple linear mapping between voltages and
+ * selectors can set min_uV and uV_step in the regulator descriptor
+ * and then use this function prior regulator registration to list
+ * the voltages. This is useful when voltages need to be listed during
+ * device-tree parsing.
+ */
+int regulator_desc_list_voltage_linear(const struct regulator_desc *desc,
+				       unsigned int selector)
+{
+	if (selector >= desc->n_voltages)
+		return -EINVAL;
+
+	if (selector < desc->linear_min_sel)
+		return 0;
+
+	selector -= desc->linear_min_sel;
+
+	return desc->min_uV + (desc->uV_step * selector);
+}
+EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear);
+
+/**
+ * regulator_list_voltage_linear - List voltages with simple calculation
+ *
+ * @rdev: Regulator device
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with a simple linear mapping between voltages and
+ * selectors can set min_uV and uV_step in the regulator descriptor
+ * and then use this function as their list_voltage() operation,
+ */
+int regulator_list_voltage_linear(struct regulator_dev *rdev,
+				  unsigned int selector)
+{
+	return regulator_desc_list_voltage_linear(rdev->desc, selector);
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
+
+/**
+ * regulator_list_voltage_pickable_linear_range - pickable range list voltages
+ *
+ * @rdev: Regulator device
+ * @selector: Selector to convert into a voltage
+ *
+ * list_voltage() operation, intended to be used by drivers utilizing pickable
+ * ranges helpers.
+ */
+int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
+						 unsigned int selector)
+{
+	const struct linear_range *range;
+	int i;
+	unsigned int all_sels = 0;
+
+	if (!rdev->desc->n_linear_ranges) {
+		BUG_ON(!rdev->desc->n_linear_ranges);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		unsigned int sel_indexes;
+
+		range = &rdev->desc->linear_ranges[i];
+
+		sel_indexes = linear_range_values_in_range(range) - 1;
+
+		if (all_sels + sel_indexes >= selector) {
+			selector -= all_sels;
+			/*
+			 * As we see here, pickable ranges work only as
+			 * long as the first selector for each pickable
+			 * range is 0, and the each subsequent range for
+			 * this 'pick' follow immediately at next unused
+			 * selector (Eg. there is no gaps between ranges).
+			 * I think this is fine but it probably should be
+			 * documented. OTOH, whole pickable range stuff
+			 * might benefit from some documentation
+			 */
+			return range->min + (range->step * selector);
+		}
+
+		all_sels += (sel_indexes + 1);
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range);
+
+/**
+ * regulator_desc_list_voltage_linear_range - List voltages for linear ranges
+ *
+ * @desc: Regulator desc for regulator which volatges are to be listed
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with a series of simple linear mappings between voltages
+ * and selectors who have set linear_ranges in the regulator descriptor
+ * can use this function prior regulator registration to list voltages.
+ * This is useful when voltages need to be listed during device-tree
+ * parsing.
+ */
+int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
+					     unsigned int selector)
+{
+	unsigned int val;
+	int ret;
+
+	BUG_ON(!desc->n_linear_ranges);
+
+	ret = linear_range_get_value_array(desc->linear_ranges,
+					   desc->n_linear_ranges, selector,
+					   &val);
+	if (ret)
+		return ret;
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear_range);
+
+/**
+ * regulator_list_voltage_linear_range - List voltages for linear ranges
+ *
+ * @rdev: Regulator device
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with a series of simple linear mappings between voltages
+ * and selectors can set linear_ranges in the regulator descriptor and
+ * then use this function as their list_voltage() operation,
+ */
+int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
+					unsigned int selector)
+{
+	return regulator_desc_list_voltage_linear_range(rdev->desc, selector);
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage_linear_range);
+
+/**
+ * regulator_list_voltage_table - List voltages with table based mapping
+ *
+ * @rdev: Regulator device
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with table based mapping between voltages and
+ * selectors can set volt_table in the regulator descriptor
+ * and then use this function as their list_voltage() operation.
+ */
+int regulator_list_voltage_table(struct regulator_dev *rdev,
+				 unsigned int selector)
+{
+	if (!rdev->desc->volt_table) {
+		BUG_ON(!rdev->desc->volt_table);
+		return -EINVAL;
+	}
+
+	if (selector >= rdev->desc->n_voltages)
+		return -EINVAL;
+	if (selector < rdev->desc->linear_min_sel)
+		return 0;
+
+	return rdev->desc->volt_table[selector];
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage_table);
+
+/**
+ * regulator_set_bypass_regmap - Default set_bypass() using regmap
+ *
+ * @rdev: device to operate on.
+ * @enable: state to set.
+ */
+int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
+{
+	unsigned int val;
+
+	if (enable) {
+		val = rdev->desc->bypass_val_on;
+		if (!val)
+			val = rdev->desc->bypass_mask;
+	} else {
+		val = rdev->desc->bypass_val_off;
+	}
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
+				  rdev->desc->bypass_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_bypass_regmap);
+
+/**
+ * regulator_set_soft_start_regmap - Default set_soft_start() using regmap
+ *
+ * @rdev: device to operate on.
+ */
+int regulator_set_soft_start_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+
+	val = rdev->desc->soft_start_val_on;
+	if (!val)
+		val = rdev->desc->soft_start_mask;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->soft_start_reg,
+				  rdev->desc->soft_start_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_soft_start_regmap);
+
+/**
+ * regulator_set_pull_down_regmap - Default set_pull_down() using regmap
+ *
+ * @rdev: device to operate on.
+ */
+int regulator_set_pull_down_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+
+	val = rdev->desc->pull_down_val_on;
+	if (!val)
+		val = rdev->desc->pull_down_mask;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->pull_down_reg,
+				  rdev->desc->pull_down_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_pull_down_regmap);
+
+/**
+ * regulator_get_bypass_regmap - Default get_bypass() using regmap
+ *
+ * @rdev: device to operate on.
+ * @enable: current state.
+ */
+int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable)
+{
+	unsigned int val;
+	unsigned int val_on = rdev->desc->bypass_val_on;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->bypass_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	if (!val_on)
+		val_on = rdev->desc->bypass_mask;
+
+	*enable = (val & rdev->desc->bypass_mask) == val_on;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_get_bypass_regmap);
+
+/**
+ * regulator_set_active_discharge_regmap - Default set_active_discharge()
+ *					   using regmap
+ *
+ * @rdev: device to operate on.
+ * @enable: state to set, 0 to disable and 1 to enable.
+ */
+int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
+					  bool enable)
+{
+	unsigned int val;
+
+	if (enable)
+		val = rdev->desc->active_discharge_on;
+	else
+		val = rdev->desc->active_discharge_off;
+
+	return regmap_update_bits(rdev->regmap,
+				  rdev->desc->active_discharge_reg,
+				  rdev->desc->active_discharge_mask, val);
+}
+EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap);
+
+/**
+ * regulator_set_current_limit_regmap - set_current_limit for regmap users
+ *
+ * @rdev: regulator to operate on
+ * @min_uA: Lower bound for current limit
+ * @max_uA: Upper bound for current limit
+ *
+ * Regulators that use regmap for their register I/O can set curr_table,
+ * csel_reg and csel_mask fields in their descriptor and then use this
+ * as their set_current_limit operation, saving some code.
+ */
+int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
+				       int min_uA, int max_uA)
+{
+	unsigned int n_currents = rdev->desc->n_current_limits;
+	int i, sel = -1;
+
+	if (n_currents == 0)
+		return -EINVAL;
+
+	if (rdev->desc->curr_table) {
+		const unsigned int *curr_table = rdev->desc->curr_table;
+		bool ascend = curr_table[n_currents - 1] > curr_table[0];
+
+		/* search for closest to maximum */
+		if (ascend) {
+			for (i = n_currents - 1; i >= 0; i--) {
+				if (min_uA <= curr_table[i] &&
+				    curr_table[i] <= max_uA) {
+					sel = i;
+					break;
+				}
+			}
+		} else {
+			for (i = 0; i < n_currents; i++) {
+				if (min_uA <= curr_table[i] &&
+				    curr_table[i] <= max_uA) {
+					sel = i;
+					break;
+				}
+			}
+		}
+	}
+
+	if (sel < 0)
+		return -EINVAL;
+
+	sel <<= ffs(rdev->desc->csel_mask) - 1;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg,
+				  rdev->desc->csel_mask, sel);
+}
+EXPORT_SYMBOL_GPL(regulator_set_current_limit_regmap);
+
+/**
+ * regulator_get_current_limit_regmap - get_current_limit for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * csel_reg and csel_mask fields in their descriptor and then use this
+ * as their get_current_limit operation, saving some code.
+ */
+int regulator_get_current_limit_regmap(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	val &= rdev->desc->csel_mask;
+	val >>= ffs(rdev->desc->csel_mask) - 1;
+
+	if (rdev->desc->curr_table) {
+		if (val >= rdev->desc->n_current_limits)
+			return -EINVAL;
+
+		return rdev->desc->curr_table[val];
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_get_current_limit_regmap);
+
+/**
+ * regulator_bulk_set_supply_names - initialize the 'supply' fields in an array
+ *                                   of regulator_bulk_data structs
+ *
+ * @consumers: array of regulator_bulk_data entries to initialize
+ * @supply_names: array of supply name strings
+ * @num_supplies: number of supply names to initialize
+ *
+ * Note: the 'consumers' array must be the size of 'num_supplies'.
+ */
+void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
+				     const char *const *supply_names,
+				     unsigned int num_supplies)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_supplies; i++)
+		consumers[i].supply = supply_names[i];
+}
+EXPORT_SYMBOL_GPL(regulator_bulk_set_supply_names);
+
+/**
+ * regulator_is_equal - test whether two regulators are the same
+ *
+ * @reg1: first regulator to operate on
+ * @reg2: second regulator to operate on
+ */
+bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2)
+{
+	return reg1->rdev == reg2->rdev;
+}
+EXPORT_SYMBOL_GPL(regulator_is_equal);
+
+static int find_closest_bigger(unsigned int target, const unsigned int *table,
+			       unsigned int num_sel, unsigned int *sel)
+{
+	unsigned int s, tmp, max, maxsel = 0;
+	bool found = false;
+
+	max = table[0];
+
+	for (s = 0; s < num_sel; s++) {
+		if (table[s] > max) {
+			max = table[s];
+			maxsel = s;
+		}
+		if (table[s] >= target) {
+			if (!found || table[s] - target < tmp - target) {
+				tmp = table[s];
+				*sel = s;
+				found = true;
+				if (tmp == target)
+					break;
+			}
+		}
+	}
+
+	if (!found) {
+		*sel = maxsel;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * regulator_set_ramp_delay_regmap - set_ramp_delay() helper
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the ramp_reg
+ * and ramp_mask fields in their descriptor and then use this as their
+ * set_ramp_delay operation, saving some code.
+ */
+int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay)
+{
+	int ret;
+	unsigned int sel;
+
+	if (WARN_ON(!rdev->desc->n_ramp_values || !rdev->desc->ramp_delay_table))
+		return -EINVAL;
+
+	ret = find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table,
+				  rdev->desc->n_ramp_values, &sel);
+
+	if (ret) {
+		dev_warn(rdev_get_dev(rdev),
+			 "Can't set ramp-delay %u, setting %u\n", ramp_delay,
+			 rdev->desc->ramp_delay_table[sel]);
+	}
+
+	sel <<= ffs(rdev->desc->ramp_mask) - 1;
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->ramp_reg,
+				  rdev->desc->ramp_mask, sel);
+}
+EXPORT_SYMBOL_GPL(regulator_set_ramp_delay_regmap);