Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 271 insertions, 0 deletions

diff --git a/drivers/regulator/max14577-regulator.c b/drivers/regulator/max14577-regulator.c
new file mode 100644
index 000000000..e34face73
--- /dev/null
+++ b/drivers/regulator/max14577-regulator.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max14577.c - Regulator driver for the Maxim 14577/77836
+//
+// Copyright (C) 2013,2014 Samsung Electronics
+// Krzysztof Kozlowski <krzk@kernel.org>
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/max14577.h>
+#include <linux/mfd/max14577-private.h>
+#include <linux/regulator/of_regulator.h>
+
+static int max14577_reg_is_enabled(struct regulator_dev *rdev)
+{
+	int rid = rdev_get_id(rdev);
+	struct regmap *rmap = rdev->regmap;
+	u8 reg_data;
+
+	switch (rid) {
+	case MAX14577_CHARGER:
+		max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, &reg_data);
+		if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0)
+			return 0;
+		max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
+		if ((reg_data & STATUS3_CGMBC_MASK) == 0)
+			return 0;
+		/* MBCHOSTEN and CGMBC are on */
+		return 1;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int max14577_reg_get_current_limit(struct regulator_dev *rdev)
+{
+	u8 reg_data;
+	struct regmap *rmap = rdev->regmap;
+	struct max14577 *max14577 = rdev_get_drvdata(rdev);
+	const struct maxim_charger_current *limits =
+		&maxim_charger_currents[max14577->dev_type];
+
+	if (rdev_get_id(rdev) != MAX14577_CHARGER)
+		return -EINVAL;
+
+	max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL4, &reg_data);
+
+	if ((reg_data & CHGCTRL4_MBCICHWRCL_MASK) == 0)
+		return limits->min;
+
+	reg_data = ((reg_data & CHGCTRL4_MBCICHWRCH_MASK) >>
+			CHGCTRL4_MBCICHWRCH_SHIFT);
+	return limits->high_start + reg_data * limits->high_step;
+}
+
+static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
+		int min_uA, int max_uA)
+{
+	u8 reg_data;
+	int ret;
+	struct max14577 *max14577 = rdev_get_drvdata(rdev);
+	const struct maxim_charger_current *limits =
+		&maxim_charger_currents[max14577->dev_type];
+
+	if (rdev_get_id(rdev) != MAX14577_CHARGER)
+		return -EINVAL;
+
+	ret = maxim_charger_calc_reg_current(limits, min_uA, max_uA, &reg_data);
+	if (ret)
+		return ret;
+
+	return max14577_update_reg(rdev->regmap, MAX14577_CHG_REG_CHG_CTRL4,
+			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
+			reg_data);
+}
+
+static const struct regulator_ops max14577_safeout_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+};
+
+static const struct regulator_ops max14577_charger_ops = {
+	.is_enabled		= max14577_reg_is_enabled,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_current_limit	= max14577_reg_get_current_limit,
+	.set_current_limit	= max14577_reg_set_current_limit,
+};
+
+#define MAX14577_SAFEOUT_REG	{ \
+	.name		= "SAFEOUT", \
+	.of_match	= of_match_ptr("SAFEOUT"), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id		= MAX14577_SAFEOUT, \
+	.ops		= &max14577_safeout_ops, \
+	.type		= REGULATOR_VOLTAGE, \
+	.owner		= THIS_MODULE, \
+	.n_voltages	= 1, \
+	.min_uV		= MAX14577_REGULATOR_SAFEOUT_VOLTAGE, \
+	.enable_reg	= MAX14577_REG_CONTROL2, \
+	.enable_mask	= CTRL2_SFOUTORD_MASK, \
+}
+#define MAX14577_CHARGER_REG	{ \
+	.name		= "CHARGER", \
+	.of_match	= of_match_ptr("CHARGER"), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id		= MAX14577_CHARGER, \
+	.ops		= &max14577_charger_ops, \
+	.type		= REGULATOR_CURRENT, \
+	.owner		= THIS_MODULE, \
+	.enable_reg	= MAX14577_CHG_REG_CHG_CTRL2, \
+	.enable_mask	= CHGCTRL2_MBCHOSTEN_MASK, \
+}
+
+static const struct regulator_desc max14577_supported_regulators[] = {
+	[MAX14577_SAFEOUT] = MAX14577_SAFEOUT_REG,
+	[MAX14577_CHARGER] = MAX14577_CHARGER_REG,
+};
+
+static const struct regulator_ops max77836_ldo_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	/* TODO: add .set_suspend_mode */
+};
+
+#define MAX77836_LDO_REG(num)	{ \
+	.name		= "LDO" # num, \
+	.of_match	= of_match_ptr("LDO" # num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id		= MAX77836_LDO ## num, \
+	.ops		= &max77836_ldo_ops, \
+	.type		= REGULATOR_VOLTAGE, \
+	.owner		= THIS_MODULE, \
+	.n_voltages	= MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM, \
+	.min_uV		= MAX77836_REGULATOR_LDO_VOLTAGE_MIN, \
+	.uV_step	= MAX77836_REGULATOR_LDO_VOLTAGE_STEP, \
+	.enable_reg	= MAX77836_LDO_REG_CNFG1_LDO ## num, \
+	.enable_mask	= MAX77836_CNFG1_LDO_PWRMD_MASK, \
+	.vsel_reg	= MAX77836_LDO_REG_CNFG1_LDO ## num, \
+	.vsel_mask	= MAX77836_CNFG1_LDO_TV_MASK, \
+}
+
+static const struct regulator_desc max77836_supported_regulators[] = {
+	[MAX14577_SAFEOUT] = MAX14577_SAFEOUT_REG,
+	[MAX14577_CHARGER] = MAX14577_CHARGER_REG,
+	[MAX77836_LDO1] = MAX77836_LDO_REG(1),
+	[MAX77836_LDO2] = MAX77836_LDO_REG(2),
+};
+
+/*
+ * Registers for regulators of max77836 use different I2C slave addresses so
+ * different regmaps must be used for them.
+ *
+ * Returns proper regmap for accessing regulator passed by id.
+ */
+static struct regmap *max14577_get_regmap(struct max14577 *max14577,
+		int reg_id)
+{
+	switch (max14577->dev_type) {
+	case MAXIM_DEVICE_TYPE_MAX77836:
+		switch (reg_id) {
+		case MAX77836_SAFEOUT ... MAX77836_CHARGER:
+			return max14577->regmap;
+		default:
+			/* MAX77836_LDO1 ... MAX77836_LDO2 */
+			return max14577->regmap_pmic;
+		}
+
+	case MAXIM_DEVICE_TYPE_MAX14577:
+	default:
+		return max14577->regmap;
+	}
+}
+
+static int max14577_regulator_probe(struct platform_device *pdev)
+{
+	struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
+	struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev);
+	int i, ret = 0;
+	struct regulator_config config = {};
+	const struct regulator_desc *supported_regulators;
+	unsigned int supported_regulators_size;
+	enum maxim_device_type dev_type = max14577->dev_type;
+
+	switch (dev_type) {
+	case MAXIM_DEVICE_TYPE_MAX77836:
+		supported_regulators = max77836_supported_regulators;
+		supported_regulators_size = ARRAY_SIZE(max77836_supported_regulators);
+		break;
+	case MAXIM_DEVICE_TYPE_MAX14577:
+	default:
+		supported_regulators = max14577_supported_regulators;
+		supported_regulators_size = ARRAY_SIZE(max14577_supported_regulators);
+	}
+
+	config.dev = max14577->dev;
+	config.driver_data = max14577;
+
+	for (i = 0; i < supported_regulators_size; i++) {
+		struct regulator_dev *regulator;
+		/*
+		 * Index of supported_regulators[] is also the id and must
+		 * match index of pdata->regulators[].
+		 */
+		if (pdata && pdata->regulators) {
+			config.init_data = pdata->regulators[i].initdata;
+			config.of_node = pdata->regulators[i].of_node;
+		}
+		config.regmap = max14577_get_regmap(max14577,
+				supported_regulators[i].id);
+
+		regulator = devm_regulator_register(&pdev->dev,
+				&supported_regulators[i], &config);
+		if (IS_ERR(regulator)) {
+			ret = PTR_ERR(regulator);
+			dev_err(&pdev->dev,
+					"Regulator init failed for %d/%s with error: %d\n",
+					i, supported_regulators[i].name, ret);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static const struct platform_device_id max14577_regulator_id[] = {
+	{ "max14577-regulator", MAXIM_DEVICE_TYPE_MAX14577, },
+	{ "max77836-regulator", MAXIM_DEVICE_TYPE_MAX77836, },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, max14577_regulator_id);
+
+static struct platform_driver max14577_regulator_driver = {
+	.driver = {
+		   .name = "max14577-regulator",
+		   },
+	.probe		= max14577_regulator_probe,
+	.id_table	= max14577_regulator_id,
+};
+
+static int __init max14577_regulator_init(void)
+{
+	BUILD_BUG_ON(ARRAY_SIZE(max14577_supported_regulators) != MAX14577_REGULATOR_NUM);
+	BUILD_BUG_ON(ARRAY_SIZE(max77836_supported_regulators) != MAX77836_REGULATOR_NUM);
+
+	BUILD_BUG_ON(MAX77836_REGULATOR_LDO_VOLTAGE_MIN +
+			(MAX77836_REGULATOR_LDO_VOLTAGE_STEP *
+			  (MAX77836_REGULATOR_LDO_VOLTAGE_STEPS_NUM - 1)) !=
+			MAX77836_REGULATOR_LDO_VOLTAGE_MAX);
+
+	return platform_driver_register(&max14577_regulator_driver);
+}
+subsys_initcall(max14577_regulator_init);
+
+static void __exit max14577_regulator_exit(void)
+{
+	platform_driver_unregister(&max14577_regulator_driver);
+}
+module_exit(max14577_regulator_exit);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_DESCRIPTION("Maxim 14577/77836 regulator driver");
+MODULE_LICENSE("GPL");