Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 333 insertions, 0 deletions

diff --git a/drivers/regulator/max20086-regulator.c b/drivers/regulator/max20086-regulator.c
new file mode 100644
index 000000000..b8bf76c17
--- /dev/null
+++ b/drivers/regulator/max20086-regulator.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// max20086-regulator.c - MAX20086-MAX20089 camera power protector driver
+//
+// Copyright (C) 2022 Laurent Pinchart <laurent.pinchart@idesonboard.com>
+// Copyright (C) 2018 Avnet, Inc.
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+/* Register Offset */
+#define MAX20086_REG_MASK		0x00
+#define MAX20086_REG_CONFIG		0x01
+#define	MAX20086_REG_ID			0x02
+#define	MAX20086_REG_STAT1		0x03
+#define	MAX20086_REG_STAT2_L		0x04
+#define	MAX20086_REG_STAT2_H		0x05
+#define	MAX20086_REG_ADC1		0x06
+#define	MAX20086_REG_ADC2		0x07
+#define	MAX20086_REG_ADC3		0x08
+#define	MAX20086_REG_ADC4		0x09
+
+/* DEVICE IDs */
+#define MAX20086_DEVICE_ID_MAX20086	0x40
+#define MAX20086_DEVICE_ID_MAX20087	0x20
+#define MAX20086_DEVICE_ID_MAX20088	0x10
+#define MAX20086_DEVICE_ID_MAX20089	0x00
+#define DEVICE_ID_MASK			0xf0
+
+/* Register bits */
+#define MAX20086_EN_MASK		0x0f
+#define MAX20086_EN_OUT1		0x01
+#define MAX20086_EN_OUT2		0x02
+#define MAX20086_EN_OUT3		0x04
+#define MAX20086_EN_OUT4		0x08
+#define MAX20086_INT_DISABLE_ALL	0x3f
+
+#define MAX20086_MAX_REGULATORS		4
+
+struct max20086_chip_info {
+	u8 id;
+	unsigned int num_outputs;
+};
+
+struct max20086_regulator {
+	struct device_node *of_node;
+	struct regulator_init_data *init_data;
+	const struct regulator_desc *desc;
+	struct regulator_dev *rdev;
+};
+
+struct max20086 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct gpio_desc *ena_gpiod;
+
+	const struct max20086_chip_info *info;
+
+	struct max20086_regulator regulators[MAX20086_MAX_REGULATORS];
+};
+
+static const struct regulator_ops max20086_buck_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+#define MAX20086_REGULATOR_DESC(n)		\
+{						\
+	.name = "OUT"#n,			\
+	.supply_name = "in",			\
+	.id = (n) - 1,				\
+	.ops = &max20086_buck_ops,		\
+	.type = REGULATOR_VOLTAGE,		\
+	.owner = THIS_MODULE,			\
+	.enable_reg = MAX20086_REG_CONFIG,	\
+	.enable_mask = 1 << ((n) - 1),		\
+	.enable_val = 1 << ((n) - 1),		\
+	.disable_val = 0,			\
+}
+
+static const char * const max20086_output_names[] = {
+	"OUT1",
+	"OUT2",
+	"OUT3",
+	"OUT4",
+};
+
+static const struct regulator_desc max20086_regulators[] = {
+	MAX20086_REGULATOR_DESC(1),
+	MAX20086_REGULATOR_DESC(2),
+	MAX20086_REGULATOR_DESC(3),
+	MAX20086_REGULATOR_DESC(4),
+};
+
+static int max20086_regulators_register(struct max20086 *chip)
+{
+	unsigned int i;
+
+	for (i = 0; i < chip->info->num_outputs; i++) {
+		struct max20086_regulator *reg = &chip->regulators[i];
+		struct regulator_config config = { };
+		struct regulator_dev *rdev;
+
+		config.dev = chip->dev;
+		config.init_data = reg->init_data;
+		config.driver_data = chip;
+		config.of_node = reg->of_node;
+		config.regmap = chip->regmap;
+		config.ena_gpiod = chip->ena_gpiod;
+
+		rdev = devm_regulator_register(chip->dev, reg->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(chip->dev,
+				"Failed to register regulator output %s\n",
+				reg->desc->name);
+			return PTR_ERR(rdev);
+		}
+
+		reg->rdev = rdev;
+	}
+
+	return 0;
+}
+
+static int max20086_parse_regulators_dt(struct max20086 *chip, bool *boot_on)
+{
+	struct of_regulator_match matches[MAX20086_MAX_REGULATORS] = { };
+	struct device_node *node;
+	unsigned int i;
+	int ret;
+
+	node = of_get_child_by_name(chip->dev->of_node, "regulators");
+	if (!node) {
+		dev_err(chip->dev, "regulators node not found\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < chip->info->num_outputs; ++i)
+		matches[i].name = max20086_output_names[i];
+
+	ret = of_regulator_match(chip->dev, node, matches,
+				 chip->info->num_outputs);
+	of_node_put(node);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to match regulators\n");
+		return -EINVAL;
+	}
+
+	*boot_on = false;
+
+	for (i = 0; i < chip->info->num_outputs; i++) {
+		struct max20086_regulator *reg = &chip->regulators[i];
+
+		reg->init_data = matches[i].init_data;
+		reg->of_node = matches[i].of_node;
+		reg->desc = &max20086_regulators[i];
+
+		if (reg->init_data) {
+			if (reg->init_data->constraints.always_on ||
+			    reg->init_data->constraints.boot_on)
+				*boot_on = true;
+		}
+	}
+
+	return 0;
+}
+
+static int max20086_detect(struct max20086 *chip)
+{
+	unsigned int data;
+	int ret;
+
+	ret = regmap_read(chip->regmap, MAX20086_REG_ID, &data);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to read DEVICE_ID reg: %d\n", ret);
+		return ret;
+	}
+
+	if ((data & DEVICE_ID_MASK) != chip->info->id) {
+		dev_err(chip->dev, "Invalid device ID 0x%02x\n", data);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static bool max20086_gen_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case MAX20086_REG_MASK:
+	case MAX20086_REG_CONFIG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config max20086_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.writeable_reg = max20086_gen_is_writeable_reg,
+	.max_register = 0x9,
+	.cache_type = REGCACHE_NONE,
+};
+
+static int max20086_i2c_probe(struct i2c_client *i2c)
+{
+	struct max20086 *chip;
+	enum gpiod_flags flags;
+	bool boot_on;
+	int ret;
+
+	chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &i2c->dev;
+	chip->info = device_get_match_data(chip->dev);
+
+	i2c_set_clientdata(i2c, chip);
+
+	chip->regmap = devm_regmap_init_i2c(i2c, &max20086_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		ret = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	ret = max20086_parse_regulators_dt(chip, &boot_on);
+	if (ret < 0)
+		return ret;
+
+	ret = max20086_detect(chip);
+	if (ret < 0)
+		return ret;
+
+	/* Until IRQ support is added, just disable all interrupts. */
+	ret = regmap_update_bits(chip->regmap, MAX20086_REG_MASK,
+				 MAX20086_INT_DISABLE_ALL,
+				 MAX20086_INT_DISABLE_ALL);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to disable interrupts: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Get the enable GPIO. If any of the outputs is marked as being
+	 * enabled at boot, request the GPIO with an initial high state to
+	 * avoid disabling outputs that may have been turned on by the boot
+	 * loader. Otherwise, request it with a low state to enter lower-power
+	 * shutdown.
+	 */
+	flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+	chip->ena_gpiod = devm_gpiod_get(chip->dev, "enable", flags);
+	if (IS_ERR(chip->ena_gpiod)) {
+		ret = PTR_ERR(chip->ena_gpiod);
+		dev_err(chip->dev, "Failed to get enable GPIO: %d\n", ret);
+		return ret;
+	}
+
+	ret = max20086_regulators_register(chip);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to register regulators: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id max20086_i2c_id[] = {
+	{ "max20086" },
+	{ "max20087" },
+	{ "max20088" },
+	{ "max20089" },
+	{ /* Sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(i2c, max20086_i2c_id);
+
+static const struct of_device_id max20086_dt_ids[] = {
+	{
+		.compatible = "maxim,max20086",
+		.data = &(const struct max20086_chip_info) {
+			.id = MAX20086_DEVICE_ID_MAX20086,
+			.num_outputs = 4,
+		}
+	}, {
+		.compatible = "maxim,max20087",
+		.data = &(const struct max20086_chip_info) {
+			.id = MAX20086_DEVICE_ID_MAX20087,
+			.num_outputs = 4,
+		}
+	}, {
+		.compatible = "maxim,max20088",
+		.data = &(const struct max20086_chip_info) {
+			.id = MAX20086_DEVICE_ID_MAX20088,
+			.num_outputs = 2,
+		}
+	}, {
+		.compatible = "maxim,max20089",
+		.data = &(const struct max20086_chip_info) {
+			.id = MAX20086_DEVICE_ID_MAX20089,
+			.num_outputs = 2,
+		}
+	},
+	{ /* Sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, max20086_dt_ids);
+
+static struct i2c_driver max20086_regulator_driver = {
+	.driver = {
+		.name = "max20086",
+		.of_match_table = of_match_ptr(max20086_dt_ids),
+	},
+	.probe_new = max20086_i2c_probe,
+	.id_table = max20086_i2c_id,
+};
+
+module_i2c_driver(max20086_regulator_driver);
+
+MODULE_AUTHOR("Watson Chow <watson.chow@avnet.com>");
+MODULE_DESCRIPTION("MAX20086-MAX20089 Camera Power Protector Driver");
+MODULE_LICENSE("GPL");