Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 285 insertions, 0 deletions

diff --git a/drivers/regulator/max8925-regulator.c b/drivers/regulator/max8925-regulator.c
new file mode 100644
index 000000000..d953b6b0d
--- /dev/null
+++ b/drivers/regulator/max8925-regulator.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Regulators driver for Maxim max8925
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *      Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/max8925.h>
+#include <linux/of.h>
+#include <linux/regulator/of_regulator.h>
+
+#define SD1_DVM_VMIN		850000
+#define SD1_DVM_VMAX		1000000
+#define SD1_DVM_STEP		50000
+#define SD1_DVM_SHIFT		5		/* SDCTL1 bit5 */
+#define SD1_DVM_EN		6		/* SDV1 bit 6 */
+
+/* bit definitions in LDO control registers */
+#define LDO_SEQ_I2C		0x7		/* Power U/D by i2c */
+#define LDO_SEQ_MASK		0x7		/* Power U/D sequence mask */
+#define LDO_SEQ_SHIFT		2		/* Power U/D sequence offset */
+#define LDO_I2C_EN		0x1		/* Enable by i2c */
+#define LDO_I2C_EN_MASK		0x1		/* Enable mask by i2c */
+#define LDO_I2C_EN_SHIFT	0		/* Enable offset by i2c */
+
+struct max8925_regulator_info {
+	struct regulator_desc	desc;
+	struct i2c_client	*i2c;
+
+	int	vol_reg;
+	int	enable_reg;
+};
+
+static int max8925_set_voltage_sel(struct regulator_dev *rdev,
+				   unsigned int selector)
+{
+	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
+	unsigned char mask = rdev->desc->n_voltages - 1;
+
+	return max8925_set_bits(info->i2c, info->vol_reg, mask, selector);
+}
+
+static int max8925_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
+	unsigned char data, mask;
+	int ret;
+
+	ret = max8925_reg_read(info->i2c, info->vol_reg);
+	if (ret < 0)
+		return ret;
+	mask = rdev->desc->n_voltages - 1;
+	data = ret & mask;
+
+	return data;
+}
+
+static int max8925_enable(struct regulator_dev *rdev)
+{
+	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
+
+	return max8925_set_bits(info->i2c, info->enable_reg,
+				LDO_SEQ_MASK << LDO_SEQ_SHIFT |
+				LDO_I2C_EN_MASK << LDO_I2C_EN_SHIFT,
+				LDO_SEQ_I2C << LDO_SEQ_SHIFT |
+				LDO_I2C_EN << LDO_I2C_EN_SHIFT);
+}
+
+static int max8925_disable(struct regulator_dev *rdev)
+{
+	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
+
+	return max8925_set_bits(info->i2c, info->enable_reg,
+				LDO_SEQ_MASK << LDO_SEQ_SHIFT |
+				LDO_I2C_EN_MASK << LDO_I2C_EN_SHIFT,
+				LDO_SEQ_I2C << LDO_SEQ_SHIFT);
+}
+
+static int max8925_is_enabled(struct regulator_dev *rdev)
+{
+	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
+	int ldo_seq, ret;
+
+	ret = max8925_reg_read(info->i2c, info->enable_reg);
+	if (ret < 0)
+		return ret;
+	ldo_seq = (ret >> LDO_SEQ_SHIFT) & LDO_SEQ_MASK;
+	if (ldo_seq != LDO_SEQ_I2C)
+		return 1;
+	else
+		return ret & (LDO_I2C_EN_MASK << LDO_I2C_EN_SHIFT);
+}
+
+static int max8925_set_dvm_voltage(struct regulator_dev *rdev, int uV)
+{
+	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
+	unsigned char data, mask;
+
+	if (uV < SD1_DVM_VMIN || uV > SD1_DVM_VMAX)
+		return -EINVAL;
+
+	data = DIV_ROUND_UP(uV - SD1_DVM_VMIN, SD1_DVM_STEP);
+	data <<= SD1_DVM_SHIFT;
+	mask = 3 << SD1_DVM_SHIFT;
+
+	return max8925_set_bits(info->i2c, info->enable_reg, mask, data);
+}
+
+static int max8925_set_dvm_enable(struct regulator_dev *rdev)
+{
+	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
+
+	return max8925_set_bits(info->i2c, info->vol_reg, 1 << SD1_DVM_EN,
+				1 << SD1_DVM_EN);
+}
+
+static int max8925_set_dvm_disable(struct regulator_dev *rdev)
+{
+	struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
+
+	return max8925_set_bits(info->i2c, info->vol_reg, 1 << SD1_DVM_EN, 0);
+}
+
+static const struct regulator_ops max8925_regulator_sdv_ops = {
+	.map_voltage		= regulator_map_voltage_linear,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_voltage_sel	= max8925_set_voltage_sel,
+	.get_voltage_sel	= max8925_get_voltage_sel,
+	.enable			= max8925_enable,
+	.disable		= max8925_disable,
+	.is_enabled		= max8925_is_enabled,
+	.set_suspend_voltage	= max8925_set_dvm_voltage,
+	.set_suspend_enable	= max8925_set_dvm_enable,
+	.set_suspend_disable	= max8925_set_dvm_disable,
+};
+
+static const struct regulator_ops max8925_regulator_ldo_ops = {
+	.map_voltage		= regulator_map_voltage_linear,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_voltage_sel	= max8925_set_voltage_sel,
+	.get_voltage_sel	= max8925_get_voltage_sel,
+	.enable			= max8925_enable,
+	.disable		= max8925_disable,
+	.is_enabled		= max8925_is_enabled,
+};
+
+#define MAX8925_SDV(_id, min, max, step)			\
+{								\
+	.desc	= {						\
+		.name	= "SDV" #_id,				\
+		.of_match = of_match_ptr("SDV" #_id),		\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.ops	= &max8925_regulator_sdv_ops,		\
+		.type	= REGULATOR_VOLTAGE,			\
+		.id	= MAX8925_ID_SD##_id,			\
+		.owner	= THIS_MODULE,				\
+		.n_voltages = 64,				\
+		.min_uV = min * 1000,				\
+		.uV_step = step * 1000,				\
+	},							\
+	.vol_reg	= MAX8925_SDV##_id,			\
+	.enable_reg	= MAX8925_SDCTL##_id,			\
+}
+
+#define MAX8925_LDO(_id, min, max, step)			\
+{								\
+	.desc	= {						\
+		.name	= "LDO" #_id,				\
+		.of_match = of_match_ptr("LDO" #_id),		\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.ops	= &max8925_regulator_ldo_ops,		\
+		.type	= REGULATOR_VOLTAGE,			\
+		.id	= MAX8925_ID_LDO##_id,			\
+		.owner	= THIS_MODULE,				\
+		.n_voltages = 64,				\
+		.min_uV = min * 1000,				\
+		.uV_step = step * 1000,				\
+	},							\
+	.vol_reg	= MAX8925_LDOVOUT##_id,			\
+	.enable_reg	= MAX8925_LDOCTL##_id,			\
+}
+
+static struct max8925_regulator_info max8925_regulator_info[] = {
+	MAX8925_SDV(1, 637.5, 1425, 12.5),
+	MAX8925_SDV(2,   650, 2225,   25),
+	MAX8925_SDV(3,   750, 3900,   50),
+
+	MAX8925_LDO(1,  750, 3900, 50),
+	MAX8925_LDO(2,  650, 2250, 25),
+	MAX8925_LDO(3,  650, 2250, 25),
+	MAX8925_LDO(4,  750, 3900, 50),
+	MAX8925_LDO(5,  750, 3900, 50),
+	MAX8925_LDO(6,  750, 3900, 50),
+	MAX8925_LDO(7,  750, 3900, 50),
+	MAX8925_LDO(8,  750, 3900, 50),
+	MAX8925_LDO(9,  750, 3900, 50),
+	MAX8925_LDO(10, 750, 3900, 50),
+	MAX8925_LDO(11, 750, 3900, 50),
+	MAX8925_LDO(12, 750, 3900, 50),
+	MAX8925_LDO(13, 750, 3900, 50),
+	MAX8925_LDO(14, 750, 3900, 50),
+	MAX8925_LDO(15, 750, 3900, 50),
+	MAX8925_LDO(16, 750, 3900, 50),
+	MAX8925_LDO(17, 650, 2250, 25),
+	MAX8925_LDO(18, 650, 2250, 25),
+	MAX8925_LDO(19, 750, 3900, 50),
+	MAX8925_LDO(20, 750, 3900, 50),
+};
+
+static int max8925_regulator_probe(struct platform_device *pdev)
+{
+	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_init_data *pdata = dev_get_platdata(&pdev->dev);
+	struct regulator_config config = { };
+	struct max8925_regulator_info *ri;
+	struct resource *res;
+	struct regulator_dev *rdev;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_REG, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "No REG resource!\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < ARRAY_SIZE(max8925_regulator_info); i++) {
+		ri = &max8925_regulator_info[i];
+		if (ri->vol_reg == res->start)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(max8925_regulator_info)) {
+		dev_err(&pdev->dev, "Failed to find regulator %llu\n",
+			(unsigned long long)res->start);
+		return -EINVAL;
+	}
+	ri->i2c = chip->i2c;
+
+	config.dev = chip->dev;
+	config.driver_data = ri;
+
+	if (pdata)
+		config.init_data = pdata;
+
+	rdev = devm_regulator_register(&pdev->dev, &ri->desc, &config);
+	if (IS_ERR(rdev)) {
+		dev_err(&pdev->dev, "failed to register regulator %s\n",
+				ri->desc.name);
+		return PTR_ERR(rdev);
+	}
+
+	platform_set_drvdata(pdev, rdev);
+	return 0;
+}
+
+static struct platform_driver max8925_regulator_driver = {
+	.driver		= {
+		.name	= "max8925-regulator",
+	},
+	.probe		= max8925_regulator_probe,
+};
+
+static int __init max8925_regulator_init(void)
+{
+	return platform_driver_register(&max8925_regulator_driver);
+}
+subsys_initcall(max8925_regulator_init);
+
+static void __exit max8925_regulator_exit(void)
+{
+	platform_driver_unregister(&max8925_regulator_driver);
+}
+module_exit(max8925_regulator_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_DESCRIPTION("Regulator Driver for Maxim 8925 PMIC");
+MODULE_ALIAS("platform:max8925-regulator");