Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 570 insertions, 0 deletions

diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c
new file mode 100644
index 000000000..15a67c05f
--- /dev/null
+++ b/drivers/regulator/pv88080-regulator.c
@@ -0,0 +1,570 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// pv88080-regulator.c - Regulator device driver for PV88080
+// Copyright (C) 2016  Powerventure Semiconductor Ltd.
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/of_regulator.h>
+#include "pv88080-regulator.h"
+
+#define PV88080_MAX_REGULATORS	4
+
+/* PV88080 REGULATOR IDs */
+enum {
+	/* BUCKs */
+	PV88080_ID_BUCK1,
+	PV88080_ID_BUCK2,
+	PV88080_ID_BUCK3,
+	PV88080_ID_HVBUCK,
+};
+
+enum pv88080_types {
+	TYPE_PV88080_AA,
+	TYPE_PV88080_BA,
+};
+
+struct pv88080_regulator {
+	struct regulator_desc desc;
+	unsigned int mode_reg;
+	unsigned int conf2;
+	unsigned int conf5;
+};
+
+struct pv88080 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct regulator_dev *rdev[PV88080_MAX_REGULATORS];
+	unsigned long type;
+	const struct pv88080_compatible_regmap *regmap_config;
+};
+
+struct pv88080_buck_voltage {
+	int min_uV;
+	int max_uV;
+	int uV_step;
+};
+
+struct pv88080_buck_regmap {
+	/* REGS */
+	int buck_enable_reg;
+	int buck_vsel_reg;
+	int buck_mode_reg;
+	int buck_limit_reg;
+	int buck_vdac_range_reg;
+	int buck_vrange_gain_reg;
+	/* MASKS */
+	int buck_enable_mask;
+	int buck_vsel_mask;
+	int buck_limit_mask;
+};
+
+struct pv88080_compatible_regmap {
+	/* BUCK1, 2, 3 */
+	struct pv88080_buck_regmap buck_regmap[PV88080_MAX_REGULATORS-1];
+	/* HVBUCK */
+	int hvbuck_enable_reg;
+	int hvbuck_vsel_reg;
+	int hvbuck_enable_mask;
+	int hvbuck_vsel_mask;
+};
+
+static const struct regmap_config pv88080_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+/* Current limits array (in uA) for BUCK1, BUCK2, BUCK3.
+ * Entry indexes corresponds to register values.
+ */
+
+static const unsigned int pv88080_buck1_limits[] = {
+	3230000, 5130000, 6960000, 8790000
+};
+
+static const unsigned int pv88080_buck23_limits[] = {
+	1496000, 2393000, 3291000, 4189000
+};
+
+static const struct pv88080_buck_voltage pv88080_buck_vol[2] = {
+	{
+		.min_uV = 600000,
+		.max_uV = 1393750,
+		.uV_step = 6250,
+	},
+	{
+		.min_uV = 1400000,
+		.max_uV = 2193750,
+		.uV_step = 6250,
+	},
+};
+
+static const struct pv88080_compatible_regmap pv88080_aa_regs = {
+	/* BUCK1 */
+	.buck_regmap[0] = {
+		.buck_enable_reg      = PV88080AA_REG_BUCK1_CONF0,
+		.buck_vsel_reg        = PV88080AA_REG_BUCK1_CONF0,
+		.buck_mode_reg        = PV88080AA_REG_BUCK1_CONF1,
+		.buck_limit_reg       = PV88080AA_REG_BUCK1_CONF1,
+		.buck_vdac_range_reg  = PV88080AA_REG_BUCK1_CONF2,
+		.buck_vrange_gain_reg = PV88080AA_REG_BUCK1_CONF5,
+		.buck_enable_mask     = PV88080_BUCK1_EN,
+		.buck_vsel_mask       = PV88080_VBUCK1_MASK,
+		.buck_limit_mask      = PV88080_BUCK1_ILIM_MASK,
+	},
+	/* BUCK2 */
+	.buck_regmap[1] = {
+		.buck_enable_reg      = PV88080AA_REG_BUCK2_CONF0,
+		.buck_vsel_reg        = PV88080AA_REG_BUCK2_CONF0,
+		.buck_mode_reg        = PV88080AA_REG_BUCK2_CONF1,
+		.buck_limit_reg	      = PV88080AA_REG_BUCK2_CONF1,
+		.buck_vdac_range_reg  = PV88080AA_REG_BUCK2_CONF2,
+		.buck_vrange_gain_reg = PV88080AA_REG_BUCK2_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK2_EN,
+		.buck_vsel_mask       = PV88080_VBUCK2_MASK,
+		.buck_limit_mask      = PV88080_BUCK2_ILIM_MASK,
+	},
+	/* BUCK3 */
+	.buck_regmap[2] = {
+		.buck_enable_reg	  = PV88080AA_REG_BUCK3_CONF0,
+		.buck_vsel_reg        = PV88080AA_REG_BUCK3_CONF0,
+		.buck_mode_reg        = PV88080AA_REG_BUCK3_CONF1,
+		.buck_limit_reg	      = PV88080AA_REG_BUCK3_CONF1,
+		.buck_vdac_range_reg  = PV88080AA_REG_BUCK3_CONF2,
+		.buck_vrange_gain_reg = PV88080AA_REG_BUCK3_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK3_EN,
+		.buck_vsel_mask       = PV88080_VBUCK3_MASK,
+		.buck_limit_mask      = PV88080_BUCK3_ILIM_MASK,
+	},
+	/* HVBUCK */
+	.hvbuck_enable_reg	      = PV88080AA_REG_HVBUCK_CONF2,
+	.hvbuck_vsel_reg          = PV88080AA_REG_HVBUCK_CONF1,
+	.hvbuck_enable_mask       = PV88080_HVBUCK_EN,
+	.hvbuck_vsel_mask         = PV88080_VHVBUCK_MASK,
+};
+
+static const struct pv88080_compatible_regmap pv88080_ba_regs = {
+	/* BUCK1 */
+	.buck_regmap[0] = {
+		.buck_enable_reg	  = PV88080BA_REG_BUCK1_CONF0,
+		.buck_vsel_reg        = PV88080BA_REG_BUCK1_CONF0,
+		.buck_mode_reg        = PV88080BA_REG_BUCK1_CONF1,
+		.buck_limit_reg       = PV88080BA_REG_BUCK1_CONF1,
+		.buck_vdac_range_reg  = PV88080BA_REG_BUCK1_CONF2,
+		.buck_vrange_gain_reg = PV88080BA_REG_BUCK1_CONF5,
+		.buck_enable_mask     = PV88080_BUCK1_EN,
+		.buck_vsel_mask       = PV88080_VBUCK1_MASK,
+		.buck_limit_mask	  = PV88080_BUCK1_ILIM_MASK,
+	},
+	/* BUCK2 */
+	.buck_regmap[1] = {
+		.buck_enable_reg	  = PV88080BA_REG_BUCK2_CONF0,
+		.buck_vsel_reg        = PV88080BA_REG_BUCK2_CONF0,
+		.buck_mode_reg        = PV88080BA_REG_BUCK2_CONF1,
+		.buck_limit_reg	      = PV88080BA_REG_BUCK2_CONF1,
+		.buck_vdac_range_reg  = PV88080BA_REG_BUCK2_CONF2,
+		.buck_vrange_gain_reg = PV88080BA_REG_BUCK2_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK2_EN,
+		.buck_vsel_mask       = PV88080_VBUCK2_MASK,
+		.buck_limit_mask	  = PV88080_BUCK2_ILIM_MASK,
+	},
+	/* BUCK3 */
+	.buck_regmap[2] = {
+		.buck_enable_reg	  = PV88080BA_REG_BUCK3_CONF0,
+		.buck_vsel_reg        = PV88080BA_REG_BUCK3_CONF0,
+		.buck_mode_reg        = PV88080BA_REG_BUCK3_CONF1,
+		.buck_limit_reg	      = PV88080BA_REG_BUCK3_CONF1,
+		.buck_vdac_range_reg  = PV88080BA_REG_BUCK3_CONF2,
+		.buck_vrange_gain_reg = PV88080BA_REG_BUCK3_CONF5,
+		.buck_enable_mask	  = PV88080_BUCK3_EN,
+		.buck_vsel_mask       = PV88080_VBUCK3_MASK,
+		.buck_limit_mask	  = PV88080_BUCK3_ILIM_MASK,
+	},
+	/* HVBUCK */
+	.hvbuck_enable_reg	      = PV88080BA_REG_HVBUCK_CONF2,
+	.hvbuck_vsel_reg          = PV88080BA_REG_HVBUCK_CONF1,
+	.hvbuck_enable_mask       = PV88080_HVBUCK_EN,
+	.hvbuck_vsel_mask		  = PV88080_VHVBUCK_MASK,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id pv88080_dt_ids[] = {
+	{ .compatible = "pvs,pv88080",    .data = (void *)TYPE_PV88080_AA },
+	{ .compatible = "pvs,pv88080-aa", .data = (void *)TYPE_PV88080_AA },
+	{ .compatible = "pvs,pv88080-ba", .data = (void *)TYPE_PV88080_BA },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pv88080_dt_ids);
+#endif
+
+static unsigned int pv88080_buck_get_mode(struct regulator_dev *rdev)
+{
+	struct pv88080_regulator *info = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret, mode = 0;
+
+	ret = regmap_read(rdev->regmap, info->mode_reg, &data);
+	if (ret < 0)
+		return ret;
+
+	switch (data & PV88080_BUCK1_MODE_MASK) {
+	case PV88080_BUCK_MODE_SYNC:
+		mode = REGULATOR_MODE_FAST;
+		break;
+	case PV88080_BUCK_MODE_AUTO:
+		mode = REGULATOR_MODE_NORMAL;
+		break;
+	case PV88080_BUCK_MODE_SLEEP:
+		mode = REGULATOR_MODE_STANDBY;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return mode;
+}
+
+static int pv88080_buck_set_mode(struct regulator_dev *rdev,
+					unsigned int mode)
+{
+	struct pv88080_regulator *info = rdev_get_drvdata(rdev);
+	int val = 0;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = PV88080_BUCK_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = PV88080_BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = PV88080_BUCK_MODE_SLEEP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(rdev->regmap, info->mode_reg,
+					PV88080_BUCK1_MODE_MASK, val);
+}
+
+static const struct regulator_ops pv88080_buck_ops = {
+	.get_mode = pv88080_buck_get_mode,
+	.set_mode = pv88080_buck_set_mode,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_current_limit = regulator_set_current_limit_regmap,
+	.get_current_limit = regulator_get_current_limit_regmap,
+};
+
+static const struct regulator_ops pv88080_hvbuck_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+#define PV88080_BUCK(chip, regl_name, min, step, max, limits_array) \
+{\
+	.desc	=	{\
+		.id = chip##_ID_##regl_name,\
+		.name = __stringify(chip##_##regl_name),\
+		.of_match = of_match_ptr(#regl_name),\
+		.regulators_node = of_match_ptr("regulators"),\
+		.type = REGULATOR_VOLTAGE,\
+		.owner = THIS_MODULE,\
+		.ops = &pv88080_buck_ops,\
+		.min_uV = min, \
+		.uV_step = step, \
+		.n_voltages = ((max) - (min))/(step) + 1, \
+		.curr_table = limits_array, \
+		.n_current_limits = ARRAY_SIZE(limits_array), \
+	},\
+}
+
+#define PV88080_HVBUCK(chip, regl_name, min, step, max) \
+{\
+	.desc	=	{\
+		.id = chip##_ID_##regl_name,\
+		.name = __stringify(chip##_##regl_name),\
+		.of_match = of_match_ptr(#regl_name),\
+		.regulators_node = of_match_ptr("regulators"),\
+		.type = REGULATOR_VOLTAGE,\
+		.owner = THIS_MODULE,\
+		.ops = &pv88080_hvbuck_ops,\
+		.min_uV = min, \
+		.uV_step = step, \
+		.n_voltages = ((max) - (min))/(step) + 1, \
+	},\
+}
+
+static struct pv88080_regulator pv88080_regulator_info[] = {
+	PV88080_BUCK(PV88080, BUCK1, 600000, 6250, 1393750,
+		pv88080_buck1_limits),
+	PV88080_BUCK(PV88080, BUCK2, 600000, 6250, 1393750,
+		pv88080_buck23_limits),
+	PV88080_BUCK(PV88080, BUCK3, 600000, 6250, 1393750,
+		pv88080_buck23_limits),
+	PV88080_HVBUCK(PV88080, HVBUCK, 0, 5000, 1275000),
+};
+
+static irqreturn_t pv88080_irq_handler(int irq, void *data)
+{
+	struct pv88080 *chip = data;
+	int i, reg_val, err, ret = IRQ_NONE;
+
+	err = regmap_read(chip->regmap, PV88080_REG_EVENT_A, &reg_val);
+	if (err < 0)
+		goto error_i2c;
+
+	if (reg_val & PV88080_E_VDD_FLT) {
+		for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
+			if (chip->rdev[i] != NULL)
+				regulator_notifier_call_chain(chip->rdev[i],
+					REGULATOR_EVENT_UNDER_VOLTAGE,
+					NULL);
+		}
+
+		err = regmap_write(chip->regmap, PV88080_REG_EVENT_A,
+			PV88080_E_VDD_FLT);
+		if (err < 0)
+			goto error_i2c;
+
+		ret = IRQ_HANDLED;
+	}
+
+	if (reg_val & PV88080_E_OVER_TEMP) {
+		for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
+			if (chip->rdev[i] != NULL)
+				regulator_notifier_call_chain(chip->rdev[i],
+					REGULATOR_EVENT_OVER_TEMP,
+					NULL);
+		}
+
+		err = regmap_write(chip->regmap, PV88080_REG_EVENT_A,
+			PV88080_E_OVER_TEMP);
+		if (err < 0)
+			goto error_i2c;
+
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+
+error_i2c:
+	dev_err(chip->dev, "I2C error : %d\n", err);
+	return IRQ_NONE;
+}
+
+/*
+ * I2C driver interface functions
+ */
+static int pv88080_i2c_probe(struct i2c_client *i2c)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
+	struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
+	struct pv88080 *chip;
+	const struct pv88080_compatible_regmap *regmap_config;
+	const struct of_device_id *match;
+	struct regulator_config config = { };
+	int i, error, ret;
+	unsigned int conf2, conf5;
+
+	chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88080), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &i2c->dev;
+	chip->regmap = devm_regmap_init_i2c(i2c, &pv88080_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		error = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "Failed to allocate register map: %d\n",
+			error);
+		return error;
+	}
+
+	if (i2c->dev.of_node) {
+		match = of_match_node(pv88080_dt_ids, i2c->dev.of_node);
+		if (!match) {
+			dev_err(chip->dev, "Failed to get of_match_node\n");
+			return -EINVAL;
+		}
+		chip->type = (unsigned long)match->data;
+	} else {
+		chip->type = id->driver_data;
+	}
+
+	i2c_set_clientdata(i2c, chip);
+
+	if (i2c->irq != 0) {
+		ret = regmap_write(chip->regmap, PV88080_REG_MASK_A, 0xFF);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to mask A reg: %d\n", ret);
+			return ret;
+		}
+		ret = regmap_write(chip->regmap, PV88080_REG_MASK_B, 0xFF);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to mask B reg: %d\n", ret);
+			return ret;
+		}
+		ret = regmap_write(chip->regmap, PV88080_REG_MASK_C, 0xFF);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to mask C reg: %d\n", ret);
+			return ret;
+		}
+
+		ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
+					pv88080_irq_handler,
+					IRQF_TRIGGER_LOW|IRQF_ONESHOT,
+					"pv88080", chip);
+		if (ret != 0) {
+			dev_err(chip->dev, "Failed to request IRQ: %d\n",
+				i2c->irq);
+			return ret;
+		}
+
+		ret = regmap_update_bits(chip->regmap, PV88080_REG_MASK_A,
+			PV88080_M_VDD_FLT | PV88080_M_OVER_TEMP, 0);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to update mask reg: %d\n", ret);
+			return ret;
+		}
+	} else {
+		dev_warn(chip->dev, "No IRQ configured\n");
+	}
+
+	switch (chip->type) {
+	case TYPE_PV88080_AA:
+		chip->regmap_config = &pv88080_aa_regs;
+		break;
+	case TYPE_PV88080_BA:
+		chip->regmap_config = &pv88080_ba_regs;
+		break;
+	}
+
+	regmap_config = chip->regmap_config;
+	config.dev = chip->dev;
+	config.regmap = chip->regmap;
+
+	/* Registeration for BUCK1, 2, 3 */
+	for (i = 0; i < PV88080_MAX_REGULATORS-1; i++) {
+		if (init_data)
+			config.init_data = &init_data[i];
+
+		pv88080_regulator_info[i].desc.csel_reg
+			= regmap_config->buck_regmap[i].buck_limit_reg;
+		pv88080_regulator_info[i].desc.csel_mask
+			= regmap_config->buck_regmap[i].buck_limit_mask;
+		pv88080_regulator_info[i].mode_reg
+			= regmap_config->buck_regmap[i].buck_mode_reg;
+		pv88080_regulator_info[i].conf2
+			= regmap_config->buck_regmap[i].buck_vdac_range_reg;
+		pv88080_regulator_info[i].conf5
+			= regmap_config->buck_regmap[i].buck_vrange_gain_reg;
+		pv88080_regulator_info[i].desc.enable_reg
+			= regmap_config->buck_regmap[i].buck_enable_reg;
+		pv88080_regulator_info[i].desc.enable_mask
+			= regmap_config->buck_regmap[i].buck_enable_mask;
+		pv88080_regulator_info[i].desc.vsel_reg
+			= regmap_config->buck_regmap[i].buck_vsel_reg;
+		pv88080_regulator_info[i].desc.vsel_mask
+			= regmap_config->buck_regmap[i].buck_vsel_mask;
+
+		ret = regmap_read(chip->regmap,
+				pv88080_regulator_info[i].conf2, &conf2);
+		if (ret < 0)
+			return ret;
+		conf2 = ((conf2 >> PV88080_BUCK_VDAC_RANGE_SHIFT) &
+			PV88080_BUCK_VDAC_RANGE_MASK);
+
+		ret = regmap_read(chip->regmap,
+				pv88080_regulator_info[i].conf5, &conf5);
+		if (ret < 0)
+			return ret;
+		conf5 = ((conf5 >> PV88080_BUCK_VRANGE_GAIN_SHIFT) &
+			PV88080_BUCK_VRANGE_GAIN_MASK);
+
+		pv88080_regulator_info[i].desc.min_uV =
+			pv88080_buck_vol[conf2].min_uV * (conf5+1);
+		pv88080_regulator_info[i].desc.uV_step =
+			pv88080_buck_vol[conf2].uV_step * (conf5+1);
+		pv88080_regulator_info[i].desc.n_voltages =
+			((pv88080_buck_vol[conf2].max_uV * (conf5+1))
+			- (pv88080_regulator_info[i].desc.min_uV))
+			/(pv88080_regulator_info[i].desc.uV_step) + 1;
+
+		config.driver_data = (void *)&pv88080_regulator_info[i];
+		chip->rdev[i] = devm_regulator_register(chip->dev,
+			&pv88080_regulator_info[i].desc, &config);
+		if (IS_ERR(chip->rdev[i])) {
+			dev_err(chip->dev,
+				"Failed to register PV88080 regulator\n");
+			return PTR_ERR(chip->rdev[i]);
+		}
+	}
+
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_reg
+		= regmap_config->hvbuck_enable_reg;
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_mask
+		= regmap_config->hvbuck_enable_mask;
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_reg
+		= regmap_config->hvbuck_vsel_reg;
+	pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_mask
+		= regmap_config->hvbuck_vsel_mask;
+
+	/* Registeration for HVBUCK */
+	if (init_data)
+		config.init_data = &init_data[PV88080_ID_HVBUCK];
+
+	config.driver_data = (void *)&pv88080_regulator_info[PV88080_ID_HVBUCK];
+	chip->rdev[PV88080_ID_HVBUCK] = devm_regulator_register(chip->dev,
+		&pv88080_regulator_info[PV88080_ID_HVBUCK].desc, &config);
+	if (IS_ERR(chip->rdev[PV88080_ID_HVBUCK])) {
+		dev_err(chip->dev, "Failed to register PV88080 regulator\n");
+		return PTR_ERR(chip->rdev[PV88080_ID_HVBUCK]);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id pv88080_i2c_id[] = {
+	{ "pv88080",    TYPE_PV88080_AA },
+	{ "pv88080-aa", TYPE_PV88080_AA },
+	{ "pv88080-ba", TYPE_PV88080_BA },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, pv88080_i2c_id);
+
+static struct i2c_driver pv88080_regulator_driver = {
+	.driver = {
+		.name = "pv88080",
+		.of_match_table = of_match_ptr(pv88080_dt_ids),
+	},
+	.probe_new = pv88080_i2c_probe,
+	.id_table = pv88080_i2c_id,
+};
+
+module_i2c_driver(pv88080_regulator_driver);
+
+MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
+MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88080");
+MODULE_LICENSE("GPL");