Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 171 insertions, 0 deletions

diff --git a/drivers/regulator/rc5t583-regulator.c b/drivers/regulator/rc5t583-regulator.c
new file mode 100644
index 000000000..62641b08b
--- /dev/null
+++ b/drivers/regulator/rc5t583-regulator.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Regulator driver for RICOH RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * based on code
+ *      Copyright (C) 2011 RICOH COMPANY,LTD
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
+#include <linux/mfd/rc5t583.h>
+
+struct rc5t583_regulator_info {
+	int			deepsleep_id;
+
+	/* Regulator register address.*/
+	uint8_t			reg_disc_reg;
+	uint8_t			disc_bit;
+	uint8_t			deepsleep_reg;
+
+	/* Regulator specific turn-on delay  and voltage settling time*/
+	int			enable_uv_per_us;
+
+	/* Used by regulator core */
+	struct regulator_desc	desc;
+};
+
+static int rc5t583_regulator_enable_time(struct regulator_dev *rdev)
+{
+	struct rc5t583_regulator_info *reg_info = rdev_get_drvdata(rdev);
+	int vsel = regulator_get_voltage_sel_regmap(rdev);
+	int curr_uV = regulator_list_voltage_linear(rdev, vsel);
+
+	return DIV_ROUND_UP(curr_uV, reg_info->enable_uv_per_us);
+}
+
+static const struct regulator_ops rc5t583_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.enable_time		= rc5t583_regulator_enable_time,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+};
+
+#define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, \
+		_vout_mask, _min_mv, _max_mv, _step_uV, _enable_mv) \
+{								\
+	.reg_disc_reg	= RC5T583_REG_##_disc_reg,		\
+	.disc_bit	= _disc_bit,				\
+	.deepsleep_reg	= RC5T583_REG_##_id##DAC_DS,		\
+	.enable_uv_per_us = _enable_mv * 1000,			\
+	.deepsleep_id	= RC5T583_DS_##_id,			\
+	.desc = {						\
+		.name = "rc5t583-regulator-"#_id,		\
+		.id = RC5T583_REGULATOR_##_id,			\
+		.n_voltages = (_max_mv - _min_mv) * 1000 / _step_uV + 1, \
+		.ops = &rc5t583_ops,				\
+		.type = REGULATOR_VOLTAGE,			\
+		.owner = THIS_MODULE,				\
+		.vsel_reg = RC5T583_REG_##_id##DAC,		\
+		.vsel_mask = _vout_mask,			\
+		.enable_reg = RC5T583_REG_##_en_reg,		\
+		.enable_mask = BIT(_en_bit),			\
+		.min_uV	= _min_mv * 1000,			\
+		.uV_step = _step_uV,				\
+		.ramp_delay = 40 * 1000,			\
+	},							\
+}
+
+static struct rc5t583_regulator_info rc5t583_reg_info[RC5T583_REGULATOR_MAX] = {
+	RC5T583_REG(DC0, DC0CTL, 0, DC0CTL, 1, 0x7F, 700, 1500, 12500, 4),
+	RC5T583_REG(DC1, DC1CTL, 0, DC1CTL, 1, 0x7F, 700, 1500, 12500, 14),
+	RC5T583_REG(DC2, DC2CTL, 0, DC2CTL, 1, 0x7F, 900, 2400, 12500, 14),
+	RC5T583_REG(DC3, DC3CTL, 0, DC3CTL, 1, 0x7F, 900, 2400, 12500, 14),
+	RC5T583_REG(LDO0, LDOEN2, 0, LDODIS2, 0, 0x7F, 900, 3400, 25000, 160),
+	RC5T583_REG(LDO1, LDOEN2, 1, LDODIS2, 1, 0x7F, 900, 3400, 25000, 160),
+	RC5T583_REG(LDO2, LDOEN2, 2, LDODIS2, 2, 0x7F, 900, 3400, 25000, 160),
+	RC5T583_REG(LDO3, LDOEN2, 3, LDODIS2, 3, 0x7F, 900, 3400, 25000, 160),
+	RC5T583_REG(LDO4, LDOEN2, 4, LDODIS2, 4, 0x3F, 750, 1500, 12500, 133),
+	RC5T583_REG(LDO5, LDOEN2, 5, LDODIS2, 5, 0x7F, 900, 3400, 25000, 267),
+	RC5T583_REG(LDO6, LDOEN2, 6, LDODIS2, 6, 0x7F, 900, 3400, 25000, 133),
+	RC5T583_REG(LDO7, LDOEN2, 7, LDODIS2, 7, 0x7F, 900, 3400, 25000, 233),
+	RC5T583_REG(LDO8, LDOEN1, 0, LDODIS1, 0, 0x7F, 900, 3400, 25000, 233),
+	RC5T583_REG(LDO9, LDOEN1, 1, LDODIS1, 1, 0x7F, 900, 3400, 25000, 133),
+};
+
+static int rc5t583_regulator_probe(struct platform_device *pdev)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
+	struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct rc5t583_regulator_info *ri;
+	int ret;
+	int id;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data, exiting...\n");
+		return -ENODEV;
+	}
+
+	for (id = 0; id < RC5T583_REGULATOR_MAX; ++id) {
+		ri = &rc5t583_reg_info[id];
+
+		if (ri->deepsleep_id == RC5T583_DS_NONE)
+			goto skip_ext_pwr_config;
+
+		ret = rc5t583_ext_power_req_config(rc5t583->dev,
+				ri->deepsleep_id,
+				pdata->regulator_ext_pwr_control[id],
+				pdata->regulator_deepsleep_slot[id]);
+		/*
+		 * Configuring external control is not a major issue,
+		 * just give warning.
+		 */
+		if (ret < 0)
+			dev_warn(&pdev->dev,
+				"Failed to configure ext control %d\n", id);
+
+skip_ext_pwr_config:
+		config.dev = &pdev->dev;
+		config.init_data = pdata->reg_init_data[id];
+		config.driver_data = ri;
+		config.regmap = rc5t583->regmap;
+
+		rdev = devm_regulator_register(&pdev->dev, &ri->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "Failed to register regulator %s\n",
+						ri->desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static struct platform_driver rc5t583_regulator_driver = {
+	.driver	= {
+		.name	= "rc5t583-regulator",
+	},
+	.probe		= rc5t583_regulator_probe,
+};
+
+static int __init rc5t583_regulator_init(void)
+{
+	return platform_driver_register(&rc5t583_regulator_driver);
+}
+subsys_initcall(rc5t583_regulator_init);
+
+static void __exit rc5t583_regulator_exit(void)
+{
+	platform_driver_unregister(&rc5t583_regulator_driver);
+}
+module_exit(rc5t583_regulator_exit);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("RC5T583 regulator driver");
+MODULE_ALIAS("platform:rc5t583-regulator");
+MODULE_LICENSE("GPL v2");