Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1012 insertions, 0 deletions

diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
new file mode 100644
index 000000000..35269f998
--- /dev/null
+++ b/drivers/regulator/s5m8767.c
@@ -0,0 +1,1012 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd
+//              http://www.samsung.com
+
+#include <linux/err.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/s5m8767.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+
+#define S5M8767_OPMODE_NORMAL_MODE 0x1
+
+struct s5m8767_info {
+	struct device *dev;
+	struct sec_pmic_dev *iodev;
+	int num_regulators;
+	struct sec_opmode_data *opmode;
+
+	int ramp_delay;
+	bool buck2_ramp;
+	bool buck3_ramp;
+	bool buck4_ramp;
+
+	bool buck2_gpiodvs;
+	bool buck3_gpiodvs;
+	bool buck4_gpiodvs;
+	u8 buck2_vol[8];
+	u8 buck3_vol[8];
+	u8 buck4_vol[8];
+	int buck_gpios[3];
+	int buck_ds[3];
+	int buck_gpioindex;
+};
+
+struct sec_voltage_desc {
+	int max;
+	int min;
+	int step;
+};
+
+static const struct sec_voltage_desc buck_voltage_val1 = {
+	.max = 2225000,
+	.min =  650000,
+	.step =   6250,
+};
+
+static const struct sec_voltage_desc buck_voltage_val2 = {
+	.max = 1600000,
+	.min =  600000,
+	.step =   6250,
+};
+
+static const struct sec_voltage_desc buck_voltage_val3 = {
+	.max = 3000000,
+	.min =  750000,
+	.step =  12500,
+};
+
+static const struct sec_voltage_desc ldo_voltage_val1 = {
+	.max = 3950000,
+	.min =  800000,
+	.step =  50000,
+};
+
+static const struct sec_voltage_desc ldo_voltage_val2 = {
+	.max = 2375000,
+	.min =  800000,
+	.step =  25000,
+};
+
+static const struct sec_voltage_desc *reg_voltage_map[] = {
+	[S5M8767_LDO1] = &ldo_voltage_val2,
+	[S5M8767_LDO2] = &ldo_voltage_val2,
+	[S5M8767_LDO3] = &ldo_voltage_val1,
+	[S5M8767_LDO4] = &ldo_voltage_val1,
+	[S5M8767_LDO5] = &ldo_voltage_val1,
+	[S5M8767_LDO6] = &ldo_voltage_val2,
+	[S5M8767_LDO7] = &ldo_voltage_val2,
+	[S5M8767_LDO8] = &ldo_voltage_val2,
+	[S5M8767_LDO9] = &ldo_voltage_val1,
+	[S5M8767_LDO10] = &ldo_voltage_val1,
+	[S5M8767_LDO11] = &ldo_voltage_val1,
+	[S5M8767_LDO12] = &ldo_voltage_val1,
+	[S5M8767_LDO13] = &ldo_voltage_val1,
+	[S5M8767_LDO14] = &ldo_voltage_val1,
+	[S5M8767_LDO15] = &ldo_voltage_val2,
+	[S5M8767_LDO16] = &ldo_voltage_val1,
+	[S5M8767_LDO17] = &ldo_voltage_val1,
+	[S5M8767_LDO18] = &ldo_voltage_val1,
+	[S5M8767_LDO19] = &ldo_voltage_val1,
+	[S5M8767_LDO20] = &ldo_voltage_val1,
+	[S5M8767_LDO21] = &ldo_voltage_val1,
+	[S5M8767_LDO22] = &ldo_voltage_val1,
+	[S5M8767_LDO23] = &ldo_voltage_val1,
+	[S5M8767_LDO24] = &ldo_voltage_val1,
+	[S5M8767_LDO25] = &ldo_voltage_val1,
+	[S5M8767_LDO26] = &ldo_voltage_val1,
+	[S5M8767_LDO27] = &ldo_voltage_val1,
+	[S5M8767_LDO28] = &ldo_voltage_val1,
+	[S5M8767_BUCK1] = &buck_voltage_val1,
+	[S5M8767_BUCK2] = &buck_voltage_val2,
+	[S5M8767_BUCK3] = &buck_voltage_val2,
+	[S5M8767_BUCK4] = &buck_voltage_val2,
+	[S5M8767_BUCK5] = &buck_voltage_val1,
+	[S5M8767_BUCK6] = &buck_voltage_val1,
+	[S5M8767_BUCK7] = &buck_voltage_val3,
+	[S5M8767_BUCK8] = &buck_voltage_val3,
+	[S5M8767_BUCK9] = &buck_voltage_val3,
+};
+
+static const unsigned int s5m8767_opmode_reg[][4] = {
+	/* {OFF, ON, LOWPOWER, SUSPEND} */
+	/* LDO1 ... LDO28 */
+	{0x0, 0x3, 0x2, 0x1}, /* LDO1 */
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x0, 0x0, 0x0},
+	{0x0, 0x3, 0x2, 0x1}, /* LDO5 */
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1}, /* LDO10 */
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1}, /* LDO15 */
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x0, 0x0, 0x0},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1}, /* LDO20 */
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x0, 0x0, 0x0},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1}, /* LDO25 */
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1},
+	{0x0, 0x3, 0x2, 0x1}, /* LDO28 */
+
+	/* BUCK1 ... BUCK9 */
+	{0x0, 0x3, 0x1, 0x1}, /* BUCK1 */
+	{0x0, 0x3, 0x1, 0x1},
+	{0x0, 0x3, 0x1, 0x1},
+	{0x0, 0x3, 0x1, 0x1},
+	{0x0, 0x3, 0x2, 0x1}, /* BUCK5 */
+	{0x0, 0x3, 0x1, 0x1},
+	{0x0, 0x3, 0x1, 0x1},
+	{0x0, 0x3, 0x1, 0x1},
+	{0x0, 0x3, 0x1, 0x1}, /* BUCK9 */
+};
+
+static int s5m8767_get_register(struct s5m8767_info *s5m8767, int reg_id,
+				int *reg, int *enable_ctrl)
+{
+	int i;
+	unsigned int mode;
+
+	switch (reg_id) {
+	case S5M8767_LDO1 ... S5M8767_LDO2:
+		*reg = S5M8767_REG_LDO1CTRL + (reg_id - S5M8767_LDO1);
+		break;
+	case S5M8767_LDO3 ... S5M8767_LDO28:
+		*reg = S5M8767_REG_LDO3CTRL + (reg_id - S5M8767_LDO3);
+		break;
+	case S5M8767_BUCK1:
+		*reg = S5M8767_REG_BUCK1CTRL1;
+		break;
+	case S5M8767_BUCK2 ... S5M8767_BUCK4:
+		*reg = S5M8767_REG_BUCK2CTRL + (reg_id - S5M8767_BUCK2) * 9;
+		break;
+	case S5M8767_BUCK5:
+		*reg = S5M8767_REG_BUCK5CTRL1;
+		break;
+	case S5M8767_BUCK6 ... S5M8767_BUCK9:
+		*reg = S5M8767_REG_BUCK6CTRL1 + (reg_id - S5M8767_BUCK6) * 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < s5m8767->num_regulators; i++) {
+		if (s5m8767->opmode[i].id == reg_id) {
+			mode = s5m8767->opmode[i].mode;
+			break;
+		}
+	}
+
+	if (i >= s5m8767->num_regulators)
+		return -EINVAL;
+
+	*enable_ctrl = s5m8767_opmode_reg[reg_id][mode] << S5M8767_ENCTRL_SHIFT;
+
+	return 0;
+}
+
+static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767)
+{
+	int reg;
+
+	switch (reg_id) {
+	case S5M8767_LDO1 ... S5M8767_LDO2:
+		reg = S5M8767_REG_LDO1CTRL + (reg_id - S5M8767_LDO1);
+		break;
+	case S5M8767_LDO3 ... S5M8767_LDO28:
+		reg = S5M8767_REG_LDO3CTRL + (reg_id - S5M8767_LDO3);
+		break;
+	case S5M8767_BUCK1:
+		reg = S5M8767_REG_BUCK1CTRL2;
+		break;
+	case S5M8767_BUCK2:
+		reg = S5M8767_REG_BUCK2DVS1;
+		if (s5m8767->buck2_gpiodvs)
+			reg += s5m8767->buck_gpioindex;
+		break;
+	case S5M8767_BUCK3:
+		reg = S5M8767_REG_BUCK3DVS1;
+		if (s5m8767->buck3_gpiodvs)
+			reg += s5m8767->buck_gpioindex;
+		break;
+	case S5M8767_BUCK4:
+		reg = S5M8767_REG_BUCK4DVS1;
+		if (s5m8767->buck4_gpiodvs)
+			reg += s5m8767->buck_gpioindex;
+		break;
+	case S5M8767_BUCK5:
+		reg = S5M8767_REG_BUCK5CTRL2;
+		break;
+	case S5M8767_BUCK6 ... S5M8767_BUCK9:
+		reg = S5M8767_REG_BUCK6CTRL2 + (reg_id - S5M8767_BUCK6) * 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return reg;
+}
+
+static int s5m8767_convert_voltage_to_sel(const struct sec_voltage_desc *desc,
+					  int min_vol)
+{
+	int selector = 0;
+
+	if (desc == NULL)
+		return -EINVAL;
+
+	if (min_vol > desc->max)
+		return -EINVAL;
+
+	if (min_vol < desc->min)
+		min_vol = desc->min;
+
+	selector = DIV_ROUND_UP(min_vol - desc->min, desc->step);
+
+	if (desc->min + desc->step * selector > desc->max)
+		return -EINVAL;
+
+	return selector;
+}
+
+static inline int s5m8767_set_high(struct s5m8767_info *s5m8767)
+{
+	int temp_index = s5m8767->buck_gpioindex;
+
+	gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
+	gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
+	gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
+
+	return 0;
+}
+
+static inline int s5m8767_set_low(struct s5m8767_info *s5m8767)
+{
+	int temp_index = s5m8767->buck_gpioindex;
+
+	gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
+	gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
+	gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
+
+	return 0;
+}
+
+static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
+				   unsigned selector)
+{
+	struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
+	int reg_id = rdev_get_id(rdev);
+	int old_index, index = 0;
+	u8 *buck234_vol = NULL;
+
+	switch (reg_id) {
+	case S5M8767_LDO1 ... S5M8767_LDO28:
+		break;
+	case S5M8767_BUCK1 ... S5M8767_BUCK6:
+		if (reg_id == S5M8767_BUCK2 && s5m8767->buck2_gpiodvs)
+			buck234_vol = &s5m8767->buck2_vol[0];
+		else if (reg_id == S5M8767_BUCK3 && s5m8767->buck3_gpiodvs)
+			buck234_vol = &s5m8767->buck3_vol[0];
+		else if (reg_id == S5M8767_BUCK4 && s5m8767->buck4_gpiodvs)
+			buck234_vol = &s5m8767->buck4_vol[0];
+		break;
+	case S5M8767_BUCK7 ... S5M8767_BUCK8:
+		return -EINVAL;
+	case S5M8767_BUCK9:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* buck234_vol != NULL means to control buck234 voltage via DVS GPIO */
+	if (buck234_vol) {
+		while (*buck234_vol != selector) {
+			buck234_vol++;
+			index++;
+		}
+		old_index = s5m8767->buck_gpioindex;
+		s5m8767->buck_gpioindex = index;
+
+		if (index > old_index)
+			return s5m8767_set_high(s5m8767);
+		else
+			return s5m8767_set_low(s5m8767);
+	} else {
+		return regulator_set_voltage_sel_regmap(rdev, selector);
+	}
+}
+
+static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev,
+					     unsigned int old_sel,
+					     unsigned int new_sel)
+{
+	struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
+
+	if ((old_sel < new_sel) && s5m8767->ramp_delay)
+		return DIV_ROUND_UP(rdev->desc->uV_step * (new_sel - old_sel),
+					s5m8767->ramp_delay * 1000);
+	return 0;
+}
+
+static const struct regulator_ops s5m8767_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= s5m8767_set_voltage_sel,
+	.set_voltage_time_sel	= s5m8767_set_voltage_time_sel,
+};
+
+static const struct regulator_ops s5m8767_buck78_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+};
+
+#define s5m8767_regulator_desc(_name) {		\
+	.name		= #_name,		\
+	.id		= S5M8767_##_name,	\
+	.ops		= &s5m8767_ops,		\
+	.type		= REGULATOR_VOLTAGE,	\
+	.owner		= THIS_MODULE,		\
+}
+
+#define s5m8767_regulator_buck78_desc(_name) {	\
+	.name		= #_name,		\
+	.id		= S5M8767_##_name,	\
+	.ops		= &s5m8767_buck78_ops,	\
+	.type		= REGULATOR_VOLTAGE,	\
+	.owner		= THIS_MODULE,		\
+}
+
+static struct regulator_desc regulators[] = {
+	s5m8767_regulator_desc(LDO1),
+	s5m8767_regulator_desc(LDO2),
+	s5m8767_regulator_desc(LDO3),
+	s5m8767_regulator_desc(LDO4),
+	s5m8767_regulator_desc(LDO5),
+	s5m8767_regulator_desc(LDO6),
+	s5m8767_regulator_desc(LDO7),
+	s5m8767_regulator_desc(LDO8),
+	s5m8767_regulator_desc(LDO9),
+	s5m8767_regulator_desc(LDO10),
+	s5m8767_regulator_desc(LDO11),
+	s5m8767_regulator_desc(LDO12),
+	s5m8767_regulator_desc(LDO13),
+	s5m8767_regulator_desc(LDO14),
+	s5m8767_regulator_desc(LDO15),
+	s5m8767_regulator_desc(LDO16),
+	s5m8767_regulator_desc(LDO17),
+	s5m8767_regulator_desc(LDO18),
+	s5m8767_regulator_desc(LDO19),
+	s5m8767_regulator_desc(LDO20),
+	s5m8767_regulator_desc(LDO21),
+	s5m8767_regulator_desc(LDO22),
+	s5m8767_regulator_desc(LDO23),
+	s5m8767_regulator_desc(LDO24),
+	s5m8767_regulator_desc(LDO25),
+	s5m8767_regulator_desc(LDO26),
+	s5m8767_regulator_desc(LDO27),
+	s5m8767_regulator_desc(LDO28),
+	s5m8767_regulator_desc(BUCK1),
+	s5m8767_regulator_desc(BUCK2),
+	s5m8767_regulator_desc(BUCK3),
+	s5m8767_regulator_desc(BUCK4),
+	s5m8767_regulator_desc(BUCK5),
+	s5m8767_regulator_desc(BUCK6),
+	s5m8767_regulator_buck78_desc(BUCK7),
+	s5m8767_regulator_buck78_desc(BUCK8),
+	s5m8767_regulator_desc(BUCK9),
+};
+
+/*
+ * Enable GPIO control over BUCK9 in regulator_config for that regulator.
+ */
+static void s5m8767_regulator_config_ext_control(struct s5m8767_info *s5m8767,
+		struct sec_regulator_data *rdata,
+		struct regulator_config *config)
+{
+	int i, mode = 0;
+
+	if (rdata->id != S5M8767_BUCK9)
+		return;
+
+	/* Check if opmode for regulator matches S5M8767_ENCTRL_USE_GPIO */
+	for (i = 0; i < s5m8767->num_regulators; i++) {
+		const struct sec_opmode_data *opmode = &s5m8767->opmode[i];
+		if (opmode->id == rdata->id) {
+			mode = s5m8767_opmode_reg[rdata->id][opmode->mode];
+			break;
+		}
+	}
+	if (mode != S5M8767_ENCTRL_USE_GPIO) {
+		dev_warn(s5m8767->dev,
+				"ext-control for %pOFn: mismatched op_mode (%x), ignoring\n",
+				rdata->reg_node, mode);
+		return;
+	}
+
+	if (!rdata->ext_control_gpiod) {
+		dev_warn(s5m8767->dev,
+				"ext-control for %pOFn: GPIO not valid, ignoring\n",
+			 rdata->reg_node);
+		return;
+	}
+
+	config->ena_gpiod = rdata->ext_control_gpiod;
+}
+
+/*
+ * Turn on GPIO control over BUCK9.
+ */
+static int s5m8767_enable_ext_control(struct s5m8767_info *s5m8767,
+		struct regulator_dev *rdev)
+{
+	int id = rdev_get_id(rdev);
+	int ret, reg, enable_ctrl;
+
+	if (id != S5M8767_BUCK9)
+		return -EINVAL;
+
+	ret = s5m8767_get_register(s5m8767, id, &reg, &enable_ctrl);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(s5m8767->iodev->regmap_pmic,
+			reg, S5M8767_ENCTRL_MASK,
+			S5M8767_ENCTRL_USE_GPIO << S5M8767_ENCTRL_SHIFT);
+}
+
+
+#ifdef CONFIG_OF
+static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev,
+			struct sec_platform_data *pdata,
+			struct device_node *pmic_np)
+{
+	int i, gpio;
+
+	for (i = 0; i < 3; i++) {
+		gpio = of_get_named_gpio(pmic_np,
+					"s5m8767,pmic-buck-dvs-gpios", i);
+		if (!gpio_is_valid(gpio)) {
+			dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+			return -EINVAL;
+		}
+		pdata->buck_gpios[i] = gpio;
+	}
+	return 0;
+}
+
+static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev,
+			struct sec_platform_data *pdata,
+			struct device_node *pmic_np)
+{
+	int i, gpio;
+
+	for (i = 0; i < 3; i++) {
+		gpio = of_get_named_gpio(pmic_np,
+					"s5m8767,pmic-buck-ds-gpios", i);
+		if (!gpio_is_valid(gpio)) {
+			dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+			return -EINVAL;
+		}
+		pdata->buck_ds[i] = gpio;
+	}
+	return 0;
+}
+
+static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
+					struct sec_platform_data *pdata)
+{
+	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct device_node *pmic_np, *regulators_np, *reg_np;
+	struct sec_regulator_data *rdata;
+	struct sec_opmode_data *rmode;
+	unsigned int i, dvs_voltage_nr = 8, ret;
+
+	pmic_np = iodev->dev->of_node;
+	if (!pmic_np) {
+		dev_err(iodev->dev, "could not find pmic sub-node\n");
+		return -ENODEV;
+	}
+
+	regulators_np = of_get_child_by_name(pmic_np, "regulators");
+	if (!regulators_np) {
+		dev_err(iodev->dev, "could not find regulators sub-node\n");
+		return -EINVAL;
+	}
+
+	/* count the number of regulators to be supported in pmic */
+	pdata->num_regulators = of_get_child_count(regulators_np);
+
+	rdata = devm_kcalloc(&pdev->dev,
+			     pdata->num_regulators, sizeof(*rdata),
+			     GFP_KERNEL);
+	if (!rdata) {
+		of_node_put(regulators_np);
+		return -ENOMEM;
+	}
+
+	rmode = devm_kcalloc(&pdev->dev,
+			     pdata->num_regulators, sizeof(*rmode),
+			     GFP_KERNEL);
+	if (!rmode) {
+		of_node_put(regulators_np);
+		return -ENOMEM;
+	}
+
+	pdata->regulators = rdata;
+	pdata->opmode = rmode;
+	for_each_child_of_node(regulators_np, reg_np) {
+		for (i = 0; i < ARRAY_SIZE(regulators); i++)
+			if (of_node_name_eq(reg_np, regulators[i].name))
+				break;
+
+		if (i == ARRAY_SIZE(regulators)) {
+			dev_warn(iodev->dev,
+			"don't know how to configure regulator %pOFn\n",
+			reg_np);
+			continue;
+		}
+
+		rdata->ext_control_gpiod = devm_fwnode_gpiod_get(
+			&pdev->dev,
+			of_fwnode_handle(reg_np),
+			"s5m8767,pmic-ext-control",
+			GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+			"s5m8767");
+		if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT) {
+			rdata->ext_control_gpiod = NULL;
+		} else if (IS_ERR(rdata->ext_control_gpiod)) {
+			of_node_put(reg_np);
+			of_node_put(regulators_np);
+			return PTR_ERR(rdata->ext_control_gpiod);
+		}
+
+		rdata->id = i;
+		rdata->initdata = of_get_regulator_init_data(
+						&pdev->dev, reg_np,
+						&regulators[i]);
+		rdata->reg_node = reg_np;
+		rdata++;
+		rmode->id = i;
+		if (of_property_read_u32(reg_np, "op_mode",
+				&rmode->mode)) {
+			dev_warn(iodev->dev,
+				"no op_mode property at %pOF\n",
+				reg_np);
+
+			rmode->mode = S5M8767_OPMODE_NORMAL_MODE;
+		}
+		rmode++;
+	}
+
+	of_node_put(regulators_np);
+
+	if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL)) {
+		pdata->buck2_gpiodvs = true;
+
+		if (of_property_read_u32_array(pmic_np,
+				"s5m8767,pmic-buck2-dvs-voltage",
+				pdata->buck2_voltage, dvs_voltage_nr)) {
+			dev_err(iodev->dev, "buck2 voltages not specified\n");
+			return -EINVAL;
+		}
+	}
+
+	if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL)) {
+		pdata->buck3_gpiodvs = true;
+
+		if (of_property_read_u32_array(pmic_np,
+				"s5m8767,pmic-buck3-dvs-voltage",
+				pdata->buck3_voltage, dvs_voltage_nr)) {
+			dev_err(iodev->dev, "buck3 voltages not specified\n");
+			return -EINVAL;
+		}
+	}
+
+	if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL)) {
+		pdata->buck4_gpiodvs = true;
+
+		if (of_property_read_u32_array(pmic_np,
+				"s5m8767,pmic-buck4-dvs-voltage",
+				pdata->buck4_voltage, dvs_voltage_nr)) {
+			dev_err(iodev->dev, "buck4 voltages not specified\n");
+			return -EINVAL;
+		}
+	}
+
+	if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
+						pdata->buck4_gpiodvs) {
+		ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
+		if (ret)
+			return -EINVAL;
+
+		if (of_property_read_u32(pmic_np,
+				"s5m8767,pmic-buck-default-dvs-idx",
+				&pdata->buck_default_idx)) {
+			pdata->buck_default_idx = 0;
+		} else {
+			if (pdata->buck_default_idx >= 8) {
+				pdata->buck_default_idx = 0;
+				dev_info(iodev->dev,
+				"invalid value for default dvs index, use 0\n");
+			}
+		}
+	}
+
+	ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np);
+	if (ret)
+		return -EINVAL;
+
+	if (of_get_property(pmic_np, "s5m8767,pmic-buck2-ramp-enable", NULL))
+		pdata->buck2_ramp_enable = true;
+
+	if (of_get_property(pmic_np, "s5m8767,pmic-buck3-ramp-enable", NULL))
+		pdata->buck3_ramp_enable = true;
+
+	if (of_get_property(pmic_np, "s5m8767,pmic-buck4-ramp-enable", NULL))
+		pdata->buck4_ramp_enable = true;
+
+	if (pdata->buck2_ramp_enable || pdata->buck3_ramp_enable
+			|| pdata->buck4_ramp_enable) {
+		if (of_property_read_u32(pmic_np, "s5m8767,pmic-buck-ramp-delay",
+				&pdata->buck_ramp_delay))
+			pdata->buck_ramp_delay = 0;
+	}
+
+	return 0;
+}
+#else
+static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
+					struct sec_platform_data *pdata)
+{
+	return 0;
+}
+#endif /* CONFIG_OF */
+
+static int s5m8767_pmic_probe(struct platform_device *pdev)
+{
+	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct sec_platform_data *pdata = iodev->pdata;
+	struct regulator_config config = { };
+	struct s5m8767_info *s5m8767;
+	int i, ret, buck_init;
+
+	if (!pdata) {
+		dev_err(pdev->dev.parent, "Platform data not supplied\n");
+		return -ENODEV;
+	}
+
+	if (iodev->dev->of_node) {
+		ret = s5m8767_pmic_dt_parse_pdata(pdev, pdata);
+		if (ret)
+			return ret;
+	}
+
+	if (pdata->buck2_gpiodvs) {
+		if (pdata->buck3_gpiodvs || pdata->buck4_gpiodvs) {
+			dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
+			return -EINVAL;
+		}
+	}
+
+	if (pdata->buck3_gpiodvs) {
+		if (pdata->buck2_gpiodvs || pdata->buck4_gpiodvs) {
+			dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
+			return -EINVAL;
+		}
+	}
+
+	if (pdata->buck4_gpiodvs) {
+		if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs) {
+			dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
+			return -EINVAL;
+		}
+	}
+
+	s5m8767 = devm_kzalloc(&pdev->dev, sizeof(struct s5m8767_info),
+				GFP_KERNEL);
+	if (!s5m8767)
+		return -ENOMEM;
+
+	s5m8767->dev = &pdev->dev;
+	s5m8767->iodev = iodev;
+	s5m8767->num_regulators = pdata->num_regulators;
+	platform_set_drvdata(pdev, s5m8767);
+
+	s5m8767->buck_gpioindex = pdata->buck_default_idx;
+	s5m8767->buck2_gpiodvs = pdata->buck2_gpiodvs;
+	s5m8767->buck3_gpiodvs = pdata->buck3_gpiodvs;
+	s5m8767->buck4_gpiodvs = pdata->buck4_gpiodvs;
+	s5m8767->buck_gpios[0] = pdata->buck_gpios[0];
+	s5m8767->buck_gpios[1] = pdata->buck_gpios[1];
+	s5m8767->buck_gpios[2] = pdata->buck_gpios[2];
+	s5m8767->buck_ds[0] = pdata->buck_ds[0];
+	s5m8767->buck_ds[1] = pdata->buck_ds[1];
+	s5m8767->buck_ds[2] = pdata->buck_ds[2];
+
+	s5m8767->ramp_delay = pdata->buck_ramp_delay;
+	s5m8767->buck2_ramp = pdata->buck2_ramp_enable;
+	s5m8767->buck3_ramp = pdata->buck3_ramp_enable;
+	s5m8767->buck4_ramp = pdata->buck4_ramp_enable;
+	s5m8767->opmode = pdata->opmode;
+
+	buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
+						   pdata->buck2_init);
+
+	regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK2DVS2,
+			buck_init);
+
+	buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
+						   pdata->buck3_init);
+
+	regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK3DVS2,
+			buck_init);
+
+	buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
+						   pdata->buck4_init);
+
+	regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK4DVS2,
+			buck_init);
+
+	for (i = 0; i < 8; i++) {
+		if (s5m8767->buck2_gpiodvs) {
+			s5m8767->buck2_vol[i] =
+				s5m8767_convert_voltage_to_sel(
+						&buck_voltage_val2,
+						pdata->buck2_voltage[i]);
+		}
+
+		if (s5m8767->buck3_gpiodvs) {
+			s5m8767->buck3_vol[i] =
+				s5m8767_convert_voltage_to_sel(
+						&buck_voltage_val2,
+						pdata->buck3_voltage[i]);
+		}
+
+		if (s5m8767->buck4_gpiodvs) {
+			s5m8767->buck4_vol[i] =
+				s5m8767_convert_voltage_to_sel(
+						&buck_voltage_val2,
+						pdata->buck4_voltage[i]);
+		}
+	}
+
+	if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
+						pdata->buck4_gpiodvs) {
+
+		if (!gpio_is_valid(pdata->buck_gpios[0]) ||
+			!gpio_is_valid(pdata->buck_gpios[1]) ||
+			!gpio_is_valid(pdata->buck_gpios[2])) {
+			dev_err(&pdev->dev, "GPIO NOT VALID\n");
+			return -EINVAL;
+		}
+
+		ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[0],
+					"S5M8767 SET1");
+		if (ret)
+			return ret;
+
+		ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[1],
+					"S5M8767 SET2");
+		if (ret)
+			return ret;
+
+		ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[2],
+					"S5M8767 SET3");
+		if (ret)
+			return ret;
+
+		/* SET1 GPIO */
+		gpio_direction_output(pdata->buck_gpios[0],
+				(s5m8767->buck_gpioindex >> 2) & 0x1);
+		/* SET2 GPIO */
+		gpio_direction_output(pdata->buck_gpios[1],
+				(s5m8767->buck_gpioindex >> 1) & 0x1);
+		/* SET3 GPIO */
+		gpio_direction_output(pdata->buck_gpios[2],
+				(s5m8767->buck_gpioindex >> 0) & 0x1);
+	}
+
+	ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[0], "S5M8767 DS2");
+	if (ret)
+		return ret;
+
+	ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[1], "S5M8767 DS3");
+	if (ret)
+		return ret;
+
+	ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[2], "S5M8767 DS4");
+	if (ret)
+		return ret;
+
+	/* DS2 GPIO */
+	gpio_direction_output(pdata->buck_ds[0], 0x0);
+	/* DS3 GPIO */
+	gpio_direction_output(pdata->buck_ds[1], 0x0);
+	/* DS4 GPIO */
+	gpio_direction_output(pdata->buck_ds[2], 0x0);
+
+	regmap_update_bits(s5m8767->iodev->regmap_pmic,
+			   S5M8767_REG_BUCK2CTRL, 1 << 1,
+			   (pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
+	regmap_update_bits(s5m8767->iodev->regmap_pmic,
+			   S5M8767_REG_BUCK3CTRL, 1 << 1,
+			   (pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1));
+	regmap_update_bits(s5m8767->iodev->regmap_pmic,
+			   S5M8767_REG_BUCK4CTRL, 1 << 1,
+			   (pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1));
+
+	/* Initialize GPIO DVS registers */
+	for (i = 0; i < 8; i++) {
+		if (s5m8767->buck2_gpiodvs) {
+			regmap_write(s5m8767->iodev->regmap_pmic,
+					S5M8767_REG_BUCK2DVS1 + i,
+					s5m8767->buck2_vol[i]);
+		}
+
+		if (s5m8767->buck3_gpiodvs) {
+			regmap_write(s5m8767->iodev->regmap_pmic,
+					S5M8767_REG_BUCK3DVS1 + i,
+					s5m8767->buck3_vol[i]);
+		}
+
+		if (s5m8767->buck4_gpiodvs) {
+			regmap_write(s5m8767->iodev->regmap_pmic,
+					S5M8767_REG_BUCK4DVS1 + i,
+					s5m8767->buck4_vol[i]);
+		}
+	}
+
+	if (s5m8767->buck2_ramp)
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+				S5M8767_REG_DVSRAMP, 0x08, 0x08);
+
+	if (s5m8767->buck3_ramp)
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+				S5M8767_REG_DVSRAMP, 0x04, 0x04);
+
+	if (s5m8767->buck4_ramp)
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+				S5M8767_REG_DVSRAMP, 0x02, 0x02);
+
+	if (s5m8767->buck2_ramp || s5m8767->buck3_ramp
+		|| s5m8767->buck4_ramp) {
+		unsigned int val;
+		switch (s5m8767->ramp_delay) {
+		case 5:
+			val = S5M8767_DVS_BUCK_RAMP_5;
+			break;
+		case 10:
+			val = S5M8767_DVS_BUCK_RAMP_10;
+			break;
+		case 25:
+			val = S5M8767_DVS_BUCK_RAMP_25;
+			break;
+		case 50:
+			val = S5M8767_DVS_BUCK_RAMP_50;
+			break;
+		case 100:
+			val = S5M8767_DVS_BUCK_RAMP_100;
+			break;
+		default:
+			val = S5M8767_DVS_BUCK_RAMP_10;
+		}
+		regmap_update_bits(s5m8767->iodev->regmap_pmic,
+					S5M8767_REG_DVSRAMP,
+					S5M8767_DVS_BUCK_RAMP_MASK,
+					val << S5M8767_DVS_BUCK_RAMP_SHIFT);
+	}
+
+	for (i = 0; i < pdata->num_regulators; i++) {
+		const struct sec_voltage_desc *desc;
+		int id = pdata->regulators[i].id;
+		int enable_reg, enable_val;
+		struct regulator_dev *rdev;
+
+		desc = reg_voltage_map[id];
+		if (desc) {
+			regulators[id].n_voltages =
+				(desc->max - desc->min) / desc->step + 1;
+			regulators[id].min_uV = desc->min;
+			regulators[id].uV_step = desc->step;
+			regulators[id].vsel_reg =
+				s5m8767_get_vsel_reg(id, s5m8767);
+			if (id < S5M8767_BUCK1)
+				regulators[id].vsel_mask = 0x3f;
+			else
+				regulators[id].vsel_mask = 0xff;
+
+			ret = s5m8767_get_register(s5m8767, id, &enable_reg,
+					     &enable_val);
+			if (ret) {
+				dev_err(s5m8767->dev, "error reading registers\n");
+				return ret;
+			}
+			regulators[id].enable_reg = enable_reg;
+			regulators[id].enable_mask = S5M8767_ENCTRL_MASK;
+			regulators[id].enable_val = enable_val;
+		}
+
+		config.dev = s5m8767->dev;
+		config.init_data = pdata->regulators[i].initdata;
+		config.driver_data = s5m8767;
+		config.regmap = iodev->regmap_pmic;
+		config.of_node = pdata->regulators[i].reg_node;
+		config.ena_gpiod = NULL;
+		if (pdata->regulators[i].ext_control_gpiod) {
+			/* Assigns config.ena_gpiod */
+			s5m8767_regulator_config_ext_control(s5m8767,
+					&pdata->regulators[i], &config);
+
+			/*
+			 * Hand the GPIO descriptor management over to the
+			 * regulator core, remove it from devres management.
+			 */
+			devm_gpiod_unhinge(s5m8767->dev, config.ena_gpiod);
+		}
+		rdev = devm_regulator_register(&pdev->dev, &regulators[id],
+						  &config);
+		if (IS_ERR(rdev)) {
+			ret = PTR_ERR(rdev);
+			dev_err(s5m8767->dev, "regulator init failed for %d\n",
+					id);
+			return ret;
+		}
+
+		if (pdata->regulators[i].ext_control_gpiod) {
+			ret = s5m8767_enable_ext_control(s5m8767, rdev);
+			if (ret < 0) {
+				dev_err(s5m8767->dev,
+						"failed to enable gpio control over %s: %d\n",
+						rdev->desc->name, ret);
+				return ret;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id s5m8767_pmic_id[] = {
+	{ "s5m8767-pmic", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, s5m8767_pmic_id);
+
+static struct platform_driver s5m8767_pmic_driver = {
+	.driver = {
+		.name = "s5m8767-pmic",
+	},
+	.probe = s5m8767_pmic_probe,
+	.id_table = s5m8767_pmic_id,
+};
+module_platform_driver(s5m8767_pmic_driver);
+
+/* Module information */
+MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
+MODULE_DESCRIPTION("Samsung S5M8767 Regulator Driver");
+MODULE_LICENSE("GPL");