Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 639 insertions, 0 deletions

diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
new file mode 100644
index 000000000..740aeccdf
--- /dev/null
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -0,0 +1,639 @@
+/*
+ * Regulator driver for TPS6524x PMIC
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define REG_LDO_SET		0x0
+#define LDO_ILIM_MASK		1	/* 0 = 400-800, 1 = 900-1500 */
+#define LDO_VSEL_MASK		0x0f
+#define LDO2_ILIM_SHIFT		12
+#define LDO2_VSEL_SHIFT		4
+#define LDO1_ILIM_SHIFT		8
+#define LDO1_VSEL_SHIFT		0
+
+#define REG_BLOCK_EN		0x1
+#define BLOCK_MASK		1
+#define BLOCK_LDO1_SHIFT	0
+#define BLOCK_LDO2_SHIFT	1
+#define BLOCK_LCD_SHIFT		2
+#define BLOCK_USB_SHIFT		3
+
+#define REG_DCDC_SET		0x2
+#define DCDC_VDCDC_MASK		0x1f
+#define DCDC_VDCDC1_SHIFT	0
+#define DCDC_VDCDC2_SHIFT	5
+#define DCDC_VDCDC3_SHIFT	10
+
+#define REG_DCDC_EN		0x3
+#define DCDCDCDC_EN_MASK	0x1
+#define DCDCDCDC1_EN_SHIFT	0
+#define DCDCDCDC1_PG_MSK	BIT(1)
+#define DCDCDCDC2_EN_SHIFT	2
+#define DCDCDCDC2_PG_MSK	BIT(3)
+#define DCDCDCDC3_EN_SHIFT	4
+#define DCDCDCDC3_PG_MSK	BIT(5)
+
+#define REG_USB			0x4
+#define USB_ILIM_SHIFT		0
+#define USB_ILIM_MASK		0x3
+#define USB_TSD_SHIFT		2
+#define USB_TSD_MASK		0x3
+#define USB_TWARN_SHIFT		4
+#define USB_TWARN_MASK		0x3
+#define USB_IWARN_SD		BIT(6)
+#define USB_FAST_LOOP		BIT(7)
+
+#define REG_ALARM		0x5
+#define ALARM_LDO1		BIT(0)
+#define ALARM_DCDC1		BIT(1)
+#define ALARM_DCDC2		BIT(2)
+#define ALARM_DCDC3		BIT(3)
+#define ALARM_LDO2		BIT(4)
+#define ALARM_USB_WARN		BIT(5)
+#define ALARM_USB_ALARM		BIT(6)
+#define ALARM_LCD		BIT(9)
+#define ALARM_TEMP_WARM		BIT(10)
+#define ALARM_TEMP_HOT		BIT(11)
+#define ALARM_NRST		BIT(14)
+#define ALARM_POWERUP		BIT(15)
+
+#define REG_INT_ENABLE		0x6
+#define INT_LDO1		BIT(0)
+#define INT_DCDC1		BIT(1)
+#define INT_DCDC2		BIT(2)
+#define INT_DCDC3		BIT(3)
+#define INT_LDO2		BIT(4)
+#define INT_USB_WARN		BIT(5)
+#define INT_USB_ALARM		BIT(6)
+#define INT_LCD			BIT(9)
+#define INT_TEMP_WARM		BIT(10)
+#define INT_TEMP_HOT		BIT(11)
+#define INT_GLOBAL_EN		BIT(15)
+
+#define REG_INT_STATUS		0x7
+#define STATUS_LDO1		BIT(0)
+#define STATUS_DCDC1		BIT(1)
+#define STATUS_DCDC2		BIT(2)
+#define STATUS_DCDC3		BIT(3)
+#define STATUS_LDO2		BIT(4)
+#define STATUS_USB_WARN		BIT(5)
+#define STATUS_USB_ALARM	BIT(6)
+#define STATUS_LCD		BIT(9)
+#define STATUS_TEMP_WARM	BIT(10)
+#define STATUS_TEMP_HOT		BIT(11)
+
+#define REG_SOFTWARE_RESET	0xb
+#define REG_WRITE_ENABLE	0xd
+#define REG_REV_ID		0xf
+
+#define N_DCDC			3
+#define N_LDO			2
+#define N_SWITCH		2
+#define N_REGULATORS		(N_DCDC + N_LDO + N_SWITCH)
+
+#define CMD_READ(reg)		((reg) << 6)
+#define CMD_WRITE(reg)		(BIT(5) | (reg) << 6)
+#define STAT_CLK		BIT(3)
+#define STAT_WRITE		BIT(2)
+#define STAT_INVALID		BIT(1)
+#define STAT_WP			BIT(0)
+
+struct field {
+	int		reg;
+	int		shift;
+	int		mask;
+};
+
+struct supply_info {
+	const char	*name;
+	int		n_voltages;
+	const unsigned int *voltages;
+	int		n_ilimsels;
+	const unsigned int *ilimsels;
+	struct field	enable, voltage, ilimsel;
+};
+
+struct tps6524x {
+	struct device		*dev;
+	struct spi_device	*spi;
+	struct mutex		lock;
+	struct regulator_desc	desc[N_REGULATORS];
+};
+
+static int __read_reg(struct tps6524x *hw, int reg)
+{
+	int error = 0;
+	u16 cmd = CMD_READ(reg), in;
+	u8 status;
+	struct spi_message m;
+	struct spi_transfer t[3];
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &cmd;
+	t[0].len = 2;
+	t[0].bits_per_word = 12;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = &in;
+	t[1].len = 2;
+	t[1].bits_per_word = 16;
+	spi_message_add_tail(&t[1], &m);
+
+	t[2].rx_buf = &status;
+	t[2].len = 1;
+	t[2].bits_per_word = 4;
+	spi_message_add_tail(&t[2], &m);
+
+	error = spi_sync(hw->spi, &m);
+	if (error < 0)
+		return error;
+
+	dev_dbg(hw->dev, "read reg %d, data %x, status %x\n",
+		reg, in, status);
+
+	if (!(status & STAT_CLK) || (status & STAT_WRITE))
+		return -EIO;
+
+	if (status & STAT_INVALID)
+		return -EINVAL;
+
+	return in;
+}
+
+static int read_reg(struct tps6524x *hw, int reg)
+{
+	int ret;
+
+	mutex_lock(&hw->lock);
+	ret = __read_reg(hw, reg);
+	mutex_unlock(&hw->lock);
+
+	return ret;
+}
+
+static int __write_reg(struct tps6524x *hw, int reg, int val)
+{
+	int error = 0;
+	u16 cmd = CMD_WRITE(reg), out = val;
+	u8 status;
+	struct spi_message m;
+	struct spi_transfer t[3];
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].tx_buf = &cmd;
+	t[0].len = 2;
+	t[0].bits_per_word = 12;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = &out;
+	t[1].len = 2;
+	t[1].bits_per_word = 16;
+	spi_message_add_tail(&t[1], &m);
+
+	t[2].rx_buf = &status;
+	t[2].len = 1;
+	t[2].bits_per_word = 4;
+	spi_message_add_tail(&t[2], &m);
+
+	error = spi_sync(hw->spi, &m);
+	if (error < 0)
+		return error;
+
+	dev_dbg(hw->dev, "wrote reg %d, data %x, status %x\n",
+		reg, out, status);
+
+	if (!(status & STAT_CLK) || !(status & STAT_WRITE))
+		return -EIO;
+
+	if (status & (STAT_INVALID | STAT_WP))
+		return -EINVAL;
+
+	return error;
+}
+
+static int __rmw_reg(struct tps6524x *hw, int reg, int mask, int val)
+{
+	int ret;
+
+	ret = __read_reg(hw, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= ~mask;
+	ret |= val;
+
+	ret = __write_reg(hw, reg, ret);
+
+	return (ret < 0) ? ret : 0;
+}
+
+static int rmw_protect(struct tps6524x *hw, int reg, int mask, int val)
+{
+	int ret;
+
+	mutex_lock(&hw->lock);
+
+	ret = __write_reg(hw, REG_WRITE_ENABLE, 1);
+	if (ret) {
+		dev_err(hw->dev, "failed to set write enable\n");
+		goto error;
+	}
+
+	ret = __rmw_reg(hw, reg, mask, val);
+	if (ret)
+		dev_err(hw->dev, "failed to rmw register %d\n", reg);
+
+	ret = __write_reg(hw, REG_WRITE_ENABLE, 0);
+	if (ret) {
+		dev_err(hw->dev, "failed to clear write enable\n");
+		goto error;
+	}
+
+error:
+	mutex_unlock(&hw->lock);
+
+	return ret;
+}
+
+static int read_field(struct tps6524x *hw, const struct field *field)
+{
+	int tmp;
+
+	tmp = read_reg(hw, field->reg);
+	if (tmp < 0)
+		return tmp;
+
+	return (tmp >> field->shift) & field->mask;
+}
+
+static int write_field(struct tps6524x *hw, const struct field *field,
+		       int val)
+{
+	if (val & ~field->mask)
+		return -EOVERFLOW;
+
+	return rmw_protect(hw, field->reg,
+				    field->mask << field->shift,
+				    val << field->shift);
+}
+
+static const unsigned int dcdc1_voltages[] = {
+	 800000,  825000,  850000,  875000,
+	 900000,  925000,  950000,  975000,
+	1000000, 1025000, 1050000, 1075000,
+	1100000, 1125000, 1150000, 1175000,
+	1200000, 1225000, 1250000, 1275000,
+	1300000, 1325000, 1350000, 1375000,
+	1400000, 1425000, 1450000, 1475000,
+	1500000, 1525000, 1550000, 1575000,
+};
+
+static const unsigned int dcdc2_voltages[] = {
+	1400000, 1450000, 1500000, 1550000,
+	1600000, 1650000, 1700000, 1750000,
+	1800000, 1850000, 1900000, 1950000,
+	2000000, 2050000, 2100000, 2150000,
+	2200000, 2250000, 2300000, 2350000,
+	2400000, 2450000, 2500000, 2550000,
+	2600000, 2650000, 2700000, 2750000,
+	2800000, 2850000, 2900000, 2950000,
+};
+
+static const unsigned int dcdc3_voltages[] = {
+	2400000, 2450000, 2500000, 2550000, 2600000,
+	2650000, 2700000, 2750000, 2800000, 2850000,
+	2900000, 2950000, 3000000, 3050000, 3100000,
+	3150000, 3200000, 3250000, 3300000, 3350000,
+	3400000, 3450000, 3500000, 3550000, 3600000,
+};
+
+static const unsigned int ldo1_voltages[] = {
+	4300000, 4350000, 4400000, 4450000,
+	4500000, 4550000, 4600000, 4650000,
+	4700000, 4750000, 4800000, 4850000,
+	4900000, 4950000, 5000000, 5050000,
+};
+
+static const unsigned int ldo2_voltages[] = {
+	1100000, 1150000, 1200000, 1250000,
+	1300000, 1700000, 1750000, 1800000,
+	1850000, 1900000, 3150000, 3200000,
+	3250000, 3300000, 3350000, 3400000,
+};
+
+static const unsigned int fixed_5000000_voltage[] = {
+	5000000
+};
+
+static const unsigned int ldo_ilimsel[] = {
+	400000, 1500000
+};
+
+static const unsigned int usb_ilimsel[] = {
+	200000, 400000, 800000, 1000000
+};
+
+static const unsigned int fixed_2400000_ilimsel[] = {
+	2400000
+};
+
+static const unsigned int fixed_1200000_ilimsel[] = {
+	1200000
+};
+
+static const unsigned int fixed_400000_ilimsel[] = {
+	400000
+};
+
+#define __MK_FIELD(_reg, _mask, _shift) \
+	{ .reg = (_reg), .mask = (_mask), .shift = (_shift), }
+
+static const struct supply_info supply_info[N_REGULATORS] = {
+	{
+		.name		= "DCDC1",
+		.n_voltages	= ARRAY_SIZE(dcdc1_voltages),
+		.voltages	= dcdc1_voltages,
+		.n_ilimsels	= ARRAY_SIZE(fixed_2400000_ilimsel),
+		.ilimsels	= fixed_2400000_ilimsel,
+		.enable		= __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
+					     DCDCDCDC1_EN_SHIFT),
+		.voltage	= __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
+					     DCDC_VDCDC1_SHIFT),
+	},
+	{
+		.name		= "DCDC2",
+		.n_voltages	= ARRAY_SIZE(dcdc2_voltages),
+		.voltages	= dcdc2_voltages,
+		.n_ilimsels	= ARRAY_SIZE(fixed_1200000_ilimsel),
+		.ilimsels	= fixed_1200000_ilimsel,
+		.enable		= __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
+					     DCDCDCDC2_EN_SHIFT),
+		.voltage	= __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
+					     DCDC_VDCDC2_SHIFT),
+	},
+	{
+		.name		= "DCDC3",
+		.n_voltages	= ARRAY_SIZE(dcdc3_voltages),
+		.voltages	= dcdc3_voltages,
+		.n_ilimsels	= ARRAY_SIZE(fixed_1200000_ilimsel),
+		.ilimsels	= fixed_1200000_ilimsel,
+		.enable		= __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
+					DCDCDCDC3_EN_SHIFT),
+		.voltage	= __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
+					     DCDC_VDCDC3_SHIFT),
+	},
+	{
+		.name		= "LDO1",
+		.n_voltages	= ARRAY_SIZE(ldo1_voltages),
+		.voltages	= ldo1_voltages,
+		.n_ilimsels	= ARRAY_SIZE(ldo_ilimsel),
+		.ilimsels	= ldo_ilimsel,
+		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+					     BLOCK_LDO1_SHIFT),
+		.voltage	= __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK,
+					     LDO1_VSEL_SHIFT),
+		.ilimsel	= __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK,
+					     LDO1_ILIM_SHIFT),
+	},
+	{
+		.name		= "LDO2",
+		.n_voltages	= ARRAY_SIZE(ldo2_voltages),
+		.voltages	= ldo2_voltages,
+		.n_ilimsels	= ARRAY_SIZE(ldo_ilimsel),
+		.ilimsels	= ldo_ilimsel,
+		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+					     BLOCK_LDO2_SHIFT),
+		.voltage	= __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK,
+					     LDO2_VSEL_SHIFT),
+		.ilimsel	= __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK,
+					     LDO2_ILIM_SHIFT),
+	},
+	{
+		.name		= "USB",
+		.n_voltages	= ARRAY_SIZE(fixed_5000000_voltage),
+		.voltages	= fixed_5000000_voltage,
+		.n_ilimsels	= ARRAY_SIZE(usb_ilimsel),
+		.ilimsels	= usb_ilimsel,
+		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+					     BLOCK_USB_SHIFT),
+		.ilimsel	= __MK_FIELD(REG_USB, USB_ILIM_MASK,
+					     USB_ILIM_SHIFT),
+	},
+	{
+		.name		= "LCD",
+		.n_voltages	= ARRAY_SIZE(fixed_5000000_voltage),
+		.voltages	= fixed_5000000_voltage,
+		.n_ilimsels	= ARRAY_SIZE(fixed_400000_ilimsel),
+		.ilimsels	= fixed_400000_ilimsel,
+		.enable		= __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
+					     BLOCK_LCD_SHIFT),
+	},
+};
+
+static int set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	if (rdev->desc->n_voltages == 1)
+		return -EINVAL;
+
+	return write_field(hw, &info->voltage, selector);
+}
+
+static int get_voltage_sel(struct regulator_dev *rdev)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+	int ret;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	if (rdev->desc->n_voltages == 1)
+		return 0;
+
+	ret = read_field(hw, &info->voltage);
+	if (ret < 0)
+		return ret;
+	if (WARN_ON(ret >= info->n_voltages))
+		return -EIO;
+
+	return ret;
+}
+
+static int set_current_limit(struct regulator_dev *rdev, int min_uA,
+			     int max_uA)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+	int i;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	if (info->n_ilimsels == 1)
+		return -EINVAL;
+
+	for (i = info->n_ilimsels - 1; i >= 0; i--) {
+		if (min_uA <= info->ilimsels[i] &&
+		    max_uA >= info->ilimsels[i])
+			return write_field(hw, &info->ilimsel, i);
+	}
+
+	return -EINVAL;
+}
+
+static int get_current_limit(struct regulator_dev *rdev)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+	int ret;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	if (info->n_ilimsels == 1)
+		return info->ilimsels[0];
+
+	ret = read_field(hw, &info->ilimsel);
+	if (ret < 0)
+		return ret;
+	if (WARN_ON(ret >= info->n_ilimsels))
+		return -EIO;
+
+	return info->ilimsels[ret];
+}
+
+static int enable_supply(struct regulator_dev *rdev)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	return write_field(hw, &info->enable, 1);
+}
+
+static int disable_supply(struct regulator_dev *rdev)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	return write_field(hw, &info->enable, 0);
+}
+
+static int is_supply_enabled(struct regulator_dev *rdev)
+{
+	const struct supply_info *info;
+	struct tps6524x *hw;
+
+	hw	= rdev_get_drvdata(rdev);
+	info	= &supply_info[rdev_get_id(rdev)];
+
+	return read_field(hw, &info->enable);
+}
+
+static const struct regulator_ops regulator_ops = {
+	.is_enabled		= is_supply_enabled,
+	.enable			= enable_supply,
+	.disable		= disable_supply,
+	.get_voltage_sel	= get_voltage_sel,
+	.set_voltage_sel	= set_voltage_sel,
+	.list_voltage		= regulator_list_voltage_table,
+	.map_voltage		= regulator_map_voltage_ascend,
+	.set_current_limit	= set_current_limit,
+	.get_current_limit	= get_current_limit,
+};
+
+static int pmic_probe(struct spi_device *spi)
+{
+	struct tps6524x *hw;
+	struct device *dev = &spi->dev;
+	const struct supply_info *info = supply_info;
+	struct regulator_init_data *init_data;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	int i;
+
+	init_data = dev_get_platdata(dev);
+	if (!init_data) {
+		dev_err(dev, "could not find regulator platform data\n");
+		return -EINVAL;
+	}
+
+	hw = devm_kzalloc(&spi->dev, sizeof(struct tps6524x), GFP_KERNEL);
+	if (!hw)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, hw);
+
+	memset(hw, 0, sizeof(struct tps6524x));
+	hw->dev = dev;
+	hw->spi = spi;
+	mutex_init(&hw->lock);
+
+	for (i = 0; i < N_REGULATORS; i++, info++, init_data++) {
+		hw->desc[i].name	= info->name;
+		hw->desc[i].id		= i;
+		hw->desc[i].n_voltages	= info->n_voltages;
+		hw->desc[i].volt_table	= info->voltages;
+		hw->desc[i].ops		= &regulator_ops;
+		hw->desc[i].type	= REGULATOR_VOLTAGE;
+		hw->desc[i].owner	= THIS_MODULE;
+
+		config.dev = dev;
+		config.init_data = init_data;
+		config.driver_data = hw;
+
+		rdev = devm_regulator_register(dev, &hw->desc[i], &config);
+		if (IS_ERR(rdev))
+			return PTR_ERR(rdev);
+	}
+
+	return 0;
+}
+
+static struct spi_driver pmic_driver = {
+	.probe		= pmic_probe,
+	.driver		= {
+		.name	= "tps6524x",
+	},
+};
+
+module_spi_driver(pmic_driver);
+
+MODULE_DESCRIPTION("TPS6524X PMIC Driver");
+MODULE_AUTHOR("Cyril Chemparathy");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:tps6524x");