Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1121 insertions, 0 deletions

diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
new file mode 100644
index 000000000..e7cc927ed
--- /dev/null
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -0,0 +1,1121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *	Adaptec AAC series RAID controller driver
+ *	(c) Copyright 2001 Red Hat Inc.
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ *               2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
+ *		 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
+ *
+ * Module Name:
+ *  commctrl.c
+ *
+ * Abstract: Contains all routines for control of the AFA comm layer
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/blkdev.h>
+#include <linux/compat.h>
+#include <linux/delay.h> /* ssleep prototype */
+#include <linux/kthread.h>
+#include <linux/uaccess.h>
+#include <scsi/scsi_host.h>
+
+#include "aacraid.h"
+
+# define AAC_DEBUG_PREAMBLE	KERN_INFO
+# define AAC_DEBUG_POSTAMBLE
+/**
+ *	ioctl_send_fib	-	send a FIB from userspace
+ *	@dev:	adapter is being processed
+ *	@arg:	arguments to the ioctl call
+ *
+ *	This routine sends a fib to the adapter on behalf of a user level
+ *	program.
+ */
+static int ioctl_send_fib(struct aac_dev * dev, void __user *arg)
+{
+	struct hw_fib * kfib;
+	struct fib *fibptr;
+	struct hw_fib * hw_fib = (struct hw_fib *)0;
+	dma_addr_t hw_fib_pa = (dma_addr_t)0LL;
+	unsigned int size, osize;
+	int retval;
+
+	if (dev->in_reset) {
+		return -EBUSY;
+	}
+	fibptr = aac_fib_alloc(dev);
+	if(fibptr == NULL) {
+		return -ENOMEM;
+	}
+
+	kfib = fibptr->hw_fib_va;
+	/*
+	 *	First copy in the header so that we can check the size field.
+	 */
+	if (copy_from_user((void *)kfib, arg, sizeof(struct aac_fibhdr))) {
+		aac_fib_free(fibptr);
+		return -EFAULT;
+	}
+	/*
+	 *	Since we copy based on the fib header size, make sure that we
+	 *	will not overrun the buffer when we copy the memory. Return
+	 *	an error if we would.
+	 */
+	osize = size = le16_to_cpu(kfib->header.Size) +
+		sizeof(struct aac_fibhdr);
+	if (size < le16_to_cpu(kfib->header.SenderSize))
+		size = le16_to_cpu(kfib->header.SenderSize);
+	if (size > dev->max_fib_size) {
+		dma_addr_t daddr;
+
+		if (size > 2048) {
+			retval = -EINVAL;
+			goto cleanup;
+		}
+
+		kfib = dma_alloc_coherent(&dev->pdev->dev, size, &daddr,
+					  GFP_KERNEL);
+		if (!kfib) {
+			retval = -ENOMEM;
+			goto cleanup;
+		}
+
+		/* Highjack the hw_fib */
+		hw_fib = fibptr->hw_fib_va;
+		hw_fib_pa = fibptr->hw_fib_pa;
+		fibptr->hw_fib_va = kfib;
+		fibptr->hw_fib_pa = daddr;
+		memset(((char *)kfib) + dev->max_fib_size, 0, size - dev->max_fib_size);
+		memcpy(kfib, hw_fib, dev->max_fib_size);
+	}
+
+	if (copy_from_user(kfib, arg, size)) {
+		retval = -EFAULT;
+		goto cleanup;
+	}
+
+	/* Sanity check the second copy */
+	if ((osize != le16_to_cpu(kfib->header.Size) +
+		sizeof(struct aac_fibhdr))
+		|| (size < le16_to_cpu(kfib->header.SenderSize))) {
+		retval = -EINVAL;
+		goto cleanup;
+	}
+
+	if (kfib->header.Command == cpu_to_le16(TakeABreakPt)) {
+		aac_adapter_interrupt(dev);
+		/*
+		 * Since we didn't really send a fib, zero out the state to allow
+		 * cleanup code not to assert.
+		 */
+		kfib->header.XferState = 0;
+	} else {
+		retval = aac_fib_send(le16_to_cpu(kfib->header.Command), fibptr,
+				le16_to_cpu(kfib->header.Size) , FsaNormal,
+				1, 1, NULL, NULL);
+		if (retval) {
+			goto cleanup;
+		}
+		if (aac_fib_complete(fibptr) != 0) {
+			retval = -EINVAL;
+			goto cleanup;
+		}
+	}
+	/*
+	 *	Make sure that the size returned by the adapter (which includes
+	 *	the header) is less than or equal to the size of a fib, so we
+	 *	don't corrupt application data. Then copy that size to the user
+	 *	buffer. (Don't try to add the header information again, since it
+	 *	was already included by the adapter.)
+	 */
+
+	retval = 0;
+	if (copy_to_user(arg, (void *)kfib, size))
+		retval = -EFAULT;
+cleanup:
+	if (hw_fib) {
+		dma_free_coherent(&dev->pdev->dev, size, kfib,
+				  fibptr->hw_fib_pa);
+		fibptr->hw_fib_pa = hw_fib_pa;
+		fibptr->hw_fib_va = hw_fib;
+	}
+	if (retval != -ERESTARTSYS)
+		aac_fib_free(fibptr);
+	return retval;
+}
+
+/**
+ *	open_getadapter_fib	-	Get the next fib
+ *	@dev:	adapter is being processed
+ *	@arg:	arguments to the open call
+ *
+ *	This routine will get the next Fib, if available, from the AdapterFibContext
+ *	passed in from the user.
+ */
+static int open_getadapter_fib(struct aac_dev * dev, void __user *arg)
+{
+	struct aac_fib_context * fibctx;
+	int status;
+
+	fibctx = kmalloc(sizeof(struct aac_fib_context), GFP_KERNEL);
+	if (fibctx == NULL) {
+		status = -ENOMEM;
+	} else {
+		unsigned long flags;
+		struct list_head * entry;
+		struct aac_fib_context * context;
+
+		fibctx->type = FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT;
+		fibctx->size = sizeof(struct aac_fib_context);
+		/*
+		 *	Yes yes, I know this could be an index, but we have a
+		 * better guarantee of uniqueness for the locked loop below.
+		 * Without the aid of a persistent history, this also helps
+		 * reduce the chance that the opaque context would be reused.
+		 */
+		fibctx->unique = (u32)((ulong)fibctx & 0xFFFFFFFF);
+		/*
+		 *	Initialize the mutex used to wait for the next AIF.
+		 */
+		init_completion(&fibctx->completion);
+		fibctx->wait = 0;
+		/*
+		 *	Initialize the fibs and set the count of fibs on
+		 *	the list to 0.
+		 */
+		fibctx->count = 0;
+		INIT_LIST_HEAD(&fibctx->fib_list);
+		fibctx->jiffies = jiffies/HZ;
+		/*
+		 *	Now add this context onto the adapter's
+		 *	AdapterFibContext list.
+		 */
+		spin_lock_irqsave(&dev->fib_lock, flags);
+		/* Ensure that we have a unique identifier */
+		entry = dev->fib_list.next;
+		while (entry != &dev->fib_list) {
+			context = list_entry(entry, struct aac_fib_context, next);
+			if (context->unique == fibctx->unique) {
+				/* Not unique (32 bits) */
+				fibctx->unique++;
+				entry = dev->fib_list.next;
+			} else {
+				entry = entry->next;
+			}
+		}
+		list_add_tail(&fibctx->next, &dev->fib_list);
+		spin_unlock_irqrestore(&dev->fib_lock, flags);
+		if (copy_to_user(arg, &fibctx->unique,
+						sizeof(fibctx->unique))) {
+			status = -EFAULT;
+		} else {
+			status = 0;
+		}
+	}
+	return status;
+}
+
+struct compat_fib_ioctl {
+	u32	fibctx;
+	s32	wait;
+	compat_uptr_t fib;
+};
+
+/**
+ *	next_getadapter_fib	-	get the next fib
+ *	@dev: adapter to use
+ *	@arg: ioctl argument
+ *
+ *	This routine will get the next Fib, if available, from the AdapterFibContext
+ *	passed in from the user.
+ */
+static int next_getadapter_fib(struct aac_dev * dev, void __user *arg)
+{
+	struct fib_ioctl f;
+	struct fib *fib;
+	struct aac_fib_context *fibctx;
+	int status;
+	struct list_head * entry;
+	unsigned long flags;
+
+	if (in_compat_syscall()) {
+		struct compat_fib_ioctl cf;
+
+		if (copy_from_user(&cf, arg, sizeof(struct compat_fib_ioctl)))
+			return -EFAULT;
+
+		f.fibctx = cf.fibctx;
+		f.wait = cf.wait;
+		f.fib = compat_ptr(cf.fib);
+	} else {
+		if (copy_from_user(&f, arg, sizeof(struct fib_ioctl)))
+			return -EFAULT;
+	}
+	/*
+	 *	Verify that the HANDLE passed in was a valid AdapterFibContext
+	 *
+	 *	Search the list of AdapterFibContext addresses on the adapter
+	 *	to be sure this is a valid address
+	 */
+	spin_lock_irqsave(&dev->fib_lock, flags);
+	entry = dev->fib_list.next;
+	fibctx = NULL;
+
+	while (entry != &dev->fib_list) {
+		fibctx = list_entry(entry, struct aac_fib_context, next);
+		/*
+		 *	Extract the AdapterFibContext from the Input parameters.
+		 */
+		if (fibctx->unique == f.fibctx) { /* We found a winner */
+			break;
+		}
+		entry = entry->next;
+		fibctx = NULL;
+	}
+	if (!fibctx) {
+		spin_unlock_irqrestore(&dev->fib_lock, flags);
+		dprintk ((KERN_INFO "Fib Context not found\n"));
+		return -EINVAL;
+	}
+
+	if((fibctx->type != FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT) ||
+		 (fibctx->size != sizeof(struct aac_fib_context))) {
+		spin_unlock_irqrestore(&dev->fib_lock, flags);
+		dprintk ((KERN_INFO "Fib Context corrupt?\n"));
+		return -EINVAL;
+	}
+	status = 0;
+	/*
+	 *	If there are no fibs to send back, then either wait or return
+	 *	-EAGAIN
+	 */
+return_fib:
+	if (!list_empty(&fibctx->fib_list)) {
+		/*
+		 *	Pull the next fib from the fibs
+		 */
+		entry = fibctx->fib_list.next;
+		list_del(entry);
+
+		fib = list_entry(entry, struct fib, fiblink);
+		fibctx->count--;
+		spin_unlock_irqrestore(&dev->fib_lock, flags);
+		if (copy_to_user(f.fib, fib->hw_fib_va, sizeof(struct hw_fib))) {
+			kfree(fib->hw_fib_va);
+			kfree(fib);
+			return -EFAULT;
+		}
+		/*
+		 *	Free the space occupied by this copy of the fib.
+		 */
+		kfree(fib->hw_fib_va);
+		kfree(fib);
+		status = 0;
+	} else {
+		spin_unlock_irqrestore(&dev->fib_lock, flags);
+		/* If someone killed the AIF aacraid thread, restart it */
+		status = !dev->aif_thread;
+		if (status && !dev->in_reset && dev->queues && dev->fsa_dev) {
+			/* Be paranoid, be very paranoid! */
+			kthread_stop(dev->thread);
+			ssleep(1);
+			dev->aif_thread = 0;
+			dev->thread = kthread_run(aac_command_thread, dev,
+						  "%s", dev->name);
+			ssleep(1);
+		}
+		if (f.wait) {
+			if (wait_for_completion_interruptible(&fibctx->completion) < 0) {
+				status = -ERESTARTSYS;
+			} else {
+				/* Lock again and retry */
+				spin_lock_irqsave(&dev->fib_lock, flags);
+				goto return_fib;
+			}
+		} else {
+			status = -EAGAIN;
+		}
+	}
+	fibctx->jiffies = jiffies/HZ;
+	return status;
+}
+
+int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context * fibctx)
+{
+	struct fib *fib;
+
+	/*
+	 *	First free any FIBs that have not been consumed.
+	 */
+	while (!list_empty(&fibctx->fib_list)) {
+		struct list_head * entry;
+		/*
+		 *	Pull the next fib from the fibs
+		 */
+		entry = fibctx->fib_list.next;
+		list_del(entry);
+		fib = list_entry(entry, struct fib, fiblink);
+		fibctx->count--;
+		/*
+		 *	Free the space occupied by this copy of the fib.
+		 */
+		kfree(fib->hw_fib_va);
+		kfree(fib);
+	}
+	/*
+	 *	Remove the Context from the AdapterFibContext List
+	 */
+	list_del(&fibctx->next);
+	/*
+	 *	Invalidate context
+	 */
+	fibctx->type = 0;
+	/*
+	 *	Free the space occupied by the Context
+	 */
+	kfree(fibctx);
+	return 0;
+}
+
+/**
+ *	close_getadapter_fib	-	close down user fib context
+ *	@dev: adapter
+ *	@arg: ioctl arguments
+ *
+ *	This routine will close down the fibctx passed in from the user.
+ */
+
+static int close_getadapter_fib(struct aac_dev * dev, void __user *arg)
+{
+	struct aac_fib_context *fibctx;
+	int status;
+	unsigned long flags;
+	struct list_head * entry;
+
+	/*
+	 *	Verify that the HANDLE passed in was a valid AdapterFibContext
+	 *
+	 *	Search the list of AdapterFibContext addresses on the adapter
+	 *	to be sure this is a valid address
+	 */
+
+	entry = dev->fib_list.next;
+	fibctx = NULL;
+
+	while(entry != &dev->fib_list) {
+		fibctx = list_entry(entry, struct aac_fib_context, next);
+		/*
+		 *	Extract the fibctx from the input parameters
+		 */
+		if (fibctx->unique == (u32)(uintptr_t)arg) /* We found a winner */
+			break;
+		entry = entry->next;
+		fibctx = NULL;
+	}
+
+	if (!fibctx)
+		return 0; /* Already gone */
+
+	if((fibctx->type != FSAFS_NTC_GET_ADAPTER_FIB_CONTEXT) ||
+		 (fibctx->size != sizeof(struct aac_fib_context)))
+		return -EINVAL;
+	spin_lock_irqsave(&dev->fib_lock, flags);
+	status = aac_close_fib_context(dev, fibctx);
+	spin_unlock_irqrestore(&dev->fib_lock, flags);
+	return status;
+}
+
+/**
+ *	check_revision	-	close down user fib context
+ *	@dev: adapter
+ *	@arg: ioctl arguments
+ *
+ *	This routine returns the driver version.
+ *	Under Linux, there have been no version incompatibilities, so this is
+ *	simple!
+ */
+
+static int check_revision(struct aac_dev *dev, void __user *arg)
+{
+	struct revision response;
+	char *driver_version = aac_driver_version;
+	u32 version;
+
+	response.compat = 1;
+	version = (simple_strtol(driver_version,
+				&driver_version, 10) << 24) | 0x00000400;
+	version += simple_strtol(driver_version + 1, &driver_version, 10) << 16;
+	version += simple_strtol(driver_version + 1, NULL, 10);
+	response.version = cpu_to_le32(version);
+#	ifdef AAC_DRIVER_BUILD
+		response.build = cpu_to_le32(AAC_DRIVER_BUILD);
+#	else
+		response.build = cpu_to_le32(9999);
+#	endif
+
+	if (copy_to_user(arg, &response, sizeof(response)))
+		return -EFAULT;
+	return 0;
+}
+
+
+/**
+ * aac_send_raw_srb()
+ *	@dev:	adapter is being processed
+ *	@arg:	arguments to the send call
+ */
+static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)
+{
+	struct fib* srbfib;
+	int status;
+	struct aac_srb *srbcmd = NULL;
+	struct aac_hba_cmd_req *hbacmd = NULL;
+	struct user_aac_srb *user_srbcmd = NULL;
+	struct user_aac_srb __user *user_srb = arg;
+	struct aac_srb_reply __user *user_reply;
+	u32 chn;
+	u32 fibsize = 0;
+	u32 flags = 0;
+	s32 rcode = 0;
+	u32 data_dir;
+	void __user *sg_user[HBA_MAX_SG_EMBEDDED];
+	void *sg_list[HBA_MAX_SG_EMBEDDED];
+	u32 sg_count[HBA_MAX_SG_EMBEDDED];
+	u32 sg_indx = 0;
+	u32 byte_count = 0;
+	u32 actual_fibsize64, actual_fibsize = 0;
+	int i;
+	int is_native_device;
+	u64 address;
+
+
+	if (dev->in_reset) {
+		dprintk((KERN_DEBUG"aacraid: send raw srb -EBUSY\n"));
+		return -EBUSY;
+	}
+	if (!capable(CAP_SYS_ADMIN)){
+		dprintk((KERN_DEBUG"aacraid: No permission to send raw srb\n"));
+		return -EPERM;
+	}
+	/*
+	 *	Allocate and initialize a Fib then setup a SRB command
+	 */
+	if (!(srbfib = aac_fib_alloc(dev))) {
+		return -ENOMEM;
+	}
+
+	memset(sg_list, 0, sizeof(sg_list)); /* cleanup may take issue */
+	if(copy_from_user(&fibsize, &user_srb->count,sizeof(u32))){
+		dprintk((KERN_DEBUG"aacraid: Could not copy data size from user\n"));
+		rcode = -EFAULT;
+		goto cleanup;
+	}
+
+	if ((fibsize < (sizeof(struct user_aac_srb) - sizeof(struct user_sgentry))) ||
+	    (fibsize > (dev->max_fib_size - sizeof(struct aac_fibhdr)))) {
+		rcode = -EINVAL;
+		goto cleanup;
+	}
+
+	user_srbcmd = memdup_user(user_srb, fibsize);
+	if (IS_ERR(user_srbcmd)) {
+		rcode = PTR_ERR(user_srbcmd);
+		user_srbcmd = NULL;
+		goto cleanup;
+	}
+
+	flags = user_srbcmd->flags; /* from user in cpu order */
+	switch (flags & (SRB_DataIn | SRB_DataOut)) {
+	case SRB_DataOut:
+		data_dir = DMA_TO_DEVICE;
+		break;
+	case (SRB_DataIn | SRB_DataOut):
+		data_dir = DMA_BIDIRECTIONAL;
+		break;
+	case SRB_DataIn:
+		data_dir = DMA_FROM_DEVICE;
+		break;
+	default:
+		data_dir = DMA_NONE;
+	}
+	if (user_srbcmd->sg.count > ARRAY_SIZE(sg_list)) {
+		dprintk((KERN_DEBUG"aacraid: too many sg entries %d\n",
+			user_srbcmd->sg.count));
+		rcode = -EINVAL;
+		goto cleanup;
+	}
+	if ((data_dir == DMA_NONE) && user_srbcmd->sg.count) {
+		dprintk((KERN_DEBUG"aacraid:SG with no direction specified\n"));
+		rcode = -EINVAL;
+		goto cleanup;
+	}
+	actual_fibsize = sizeof(struct aac_srb) - sizeof(struct sgentry) +
+		((user_srbcmd->sg.count & 0xff) * sizeof(struct sgentry));
+	actual_fibsize64 = actual_fibsize + (user_srbcmd->sg.count & 0xff) *
+	  (sizeof(struct sgentry64) - sizeof(struct sgentry));
+	/* User made a mistake - should not continue */
+	if ((actual_fibsize != fibsize) && (actual_fibsize64 != fibsize)) {
+		dprintk((KERN_DEBUG"aacraid: Bad Size specified in "
+		  "Raw SRB command calculated fibsize=%lu;%lu "
+		  "user_srbcmd->sg.count=%d aac_srb=%lu sgentry=%lu;%lu "
+		  "issued fibsize=%d\n",
+		  actual_fibsize, actual_fibsize64, user_srbcmd->sg.count,
+		  sizeof(struct aac_srb), sizeof(struct sgentry),
+		  sizeof(struct sgentry64), fibsize));
+		rcode = -EINVAL;
+		goto cleanup;
+	}
+
+	chn = user_srbcmd->channel;
+	if (chn < AAC_MAX_BUSES && user_srbcmd->id < AAC_MAX_TARGETS &&
+		dev->hba_map[chn][user_srbcmd->id].devtype ==
+		AAC_DEVTYPE_NATIVE_RAW) {
+		is_native_device = 1;
+		hbacmd = (struct aac_hba_cmd_req *)srbfib->hw_fib_va;
+		memset(hbacmd, 0, 96);	/* sizeof(*hbacmd) is not necessary */
+
+		/* iu_type is a parameter of aac_hba_send */
+		switch (data_dir) {
+		case DMA_TO_DEVICE:
+			hbacmd->byte1 = 2;
+			break;
+		case DMA_FROM_DEVICE:
+		case DMA_BIDIRECTIONAL:
+			hbacmd->byte1 = 1;
+			break;
+		case DMA_NONE:
+		default:
+			break;
+		}
+		hbacmd->lun[1] = cpu_to_le32(user_srbcmd->lun);
+		hbacmd->it_nexus = dev->hba_map[chn][user_srbcmd->id].rmw_nexus;
+
+		/*
+		 * we fill in reply_qid later in aac_src_deliver_message
+		 * we fill in iu_type, request_id later in aac_hba_send
+		 * we fill in emb_data_desc_count, data_length later
+		 * in sg list build
+		 */
+
+		memcpy(hbacmd->cdb, user_srbcmd->cdb, sizeof(hbacmd->cdb));
+
+		address = (u64)srbfib->hw_error_pa;
+		hbacmd->error_ptr_hi = cpu_to_le32((u32)(address >> 32));
+		hbacmd->error_ptr_lo = cpu_to_le32((u32)(address & 0xffffffff));
+		hbacmd->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE);
+		hbacmd->emb_data_desc_count =
+					cpu_to_le32(user_srbcmd->sg.count);
+		srbfib->hbacmd_size = 64 +
+			user_srbcmd->sg.count * sizeof(struct aac_hba_sgl);
+
+	} else {
+		is_native_device = 0;
+		aac_fib_init(srbfib);
+
+		/* raw_srb FIB is not FastResponseCapable */
+		srbfib->hw_fib_va->header.XferState &=
+			~cpu_to_le32(FastResponseCapable);
+
+		srbcmd = (struct aac_srb *) fib_data(srbfib);
+
+		// Fix up srb for endian and force some values
+
+		srbcmd->function = cpu_to_le32(SRBF_ExecuteScsi); // Force this
+		srbcmd->channel	 = cpu_to_le32(user_srbcmd->channel);
+		srbcmd->id	 = cpu_to_le32(user_srbcmd->id);
+		srbcmd->lun	 = cpu_to_le32(user_srbcmd->lun);
+		srbcmd->timeout	 = cpu_to_le32(user_srbcmd->timeout);
+		srbcmd->flags	 = cpu_to_le32(flags);
+		srbcmd->retry_limit = 0; // Obsolete parameter
+		srbcmd->cdb_size = cpu_to_le32(user_srbcmd->cdb_size);
+		memcpy(srbcmd->cdb, user_srbcmd->cdb, sizeof(srbcmd->cdb));
+	}
+
+	byte_count = 0;
+	if (is_native_device) {
+		struct user_sgmap *usg32 = &user_srbcmd->sg;
+		struct user_sgmap64 *usg64 =
+			(struct user_sgmap64 *)&user_srbcmd->sg;
+
+		for (i = 0; i < usg32->count; i++) {
+			void *p;
+			u64 addr;
+
+			sg_count[i] = (actual_fibsize64 == fibsize) ?
+				usg64->sg[i].count : usg32->sg[i].count;
+			if (sg_count[i] >
+				(dev->scsi_host_ptr->max_sectors << 9)) {
+				pr_err("aacraid: upsg->sg[%d].count=%u>%u\n",
+					i, sg_count[i],
+					dev->scsi_host_ptr->max_sectors << 9);
+				rcode = -EINVAL;
+				goto cleanup;
+			}
+
+			p = kmalloc(sg_count[i], GFP_KERNEL);
+			if (!p) {
+				rcode = -ENOMEM;
+				goto cleanup;
+			}
+
+			if (actual_fibsize64 == fibsize) {
+				addr = (u64)usg64->sg[i].addr[0];
+				addr += ((u64)usg64->sg[i].addr[1]) << 32;
+			} else {
+				addr = (u64)usg32->sg[i].addr;
+			}
+
+			sg_user[i] = (void __user *)(uintptr_t)addr;
+			sg_list[i] = p; // save so we can clean up later
+			sg_indx = i;
+
+			if (flags & SRB_DataOut) {
+				if (copy_from_user(p, sg_user[i],
+					sg_count[i])) {
+					rcode = -EFAULT;
+					goto cleanup;
+				}
+			}
+			addr = dma_map_single(&dev->pdev->dev, p, sg_count[i],
+					      data_dir);
+			hbacmd->sge[i].addr_hi = cpu_to_le32((u32)(addr>>32));
+			hbacmd->sge[i].addr_lo = cpu_to_le32(
+						(u32)(addr & 0xffffffff));
+			hbacmd->sge[i].len = cpu_to_le32(sg_count[i]);
+			hbacmd->sge[i].flags = 0;
+			byte_count += sg_count[i];
+		}
+
+		if (usg32->count > 0)	/* embedded sglist */
+			hbacmd->sge[usg32->count-1].flags =
+				cpu_to_le32(0x40000000);
+		hbacmd->data_length = cpu_to_le32(byte_count);
+
+		status = aac_hba_send(HBA_IU_TYPE_SCSI_CMD_REQ, srbfib,
+					NULL, NULL);
+
+	} else if (dev->adapter_info.options & AAC_OPT_SGMAP_HOST64) {
+		struct user_sgmap64* upsg = (struct user_sgmap64*)&user_srbcmd->sg;
+		struct sgmap64* psg = (struct sgmap64*)&srbcmd->sg;
+
+		/*
+		 * This should also catch if user used the 32 bit sgmap
+		 */
+		if (actual_fibsize64 == fibsize) {
+			actual_fibsize = actual_fibsize64;
+			for (i = 0; i < upsg->count; i++) {
+				u64 addr;
+				void* p;
+
+				sg_count[i] = upsg->sg[i].count;
+				if (sg_count[i] >
+				    ((dev->adapter_info.options &
+				     AAC_OPT_NEW_COMM) ?
+				      (dev->scsi_host_ptr->max_sectors << 9) :
+				      65536)) {
+					rcode = -EINVAL;
+					goto cleanup;
+				}
+
+				p = kmalloc(sg_count[i], GFP_KERNEL);
+				if(!p) {
+					dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+					  sg_count[i], i, upsg->count));
+					rcode = -ENOMEM;
+					goto cleanup;
+				}
+				addr = (u64)upsg->sg[i].addr[0];
+				addr += ((u64)upsg->sg[i].addr[1]) << 32;
+				sg_user[i] = (void __user *)(uintptr_t)addr;
+				sg_list[i] = p; // save so we can clean up later
+				sg_indx = i;
+
+				if (flags & SRB_DataOut) {
+					if (copy_from_user(p, sg_user[i],
+						sg_count[i])){
+						dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+						rcode = -EFAULT;
+						goto cleanup;
+					}
+				}
+				addr = dma_map_single(&dev->pdev->dev, p,
+						      sg_count[i], data_dir);
+
+				psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
+				psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
+				byte_count += sg_count[i];
+				psg->sg[i].count = cpu_to_le32(sg_count[i]);
+			}
+		} else {
+			struct user_sgmap* usg;
+			usg = kmemdup(upsg,
+				      actual_fibsize - sizeof(struct aac_srb)
+				      + sizeof(struct sgmap), GFP_KERNEL);
+			if (!usg) {
+				dprintk((KERN_DEBUG"aacraid: Allocation error in Raw SRB command\n"));
+				rcode = -ENOMEM;
+				goto cleanup;
+			}
+			actual_fibsize = actual_fibsize64;
+
+			for (i = 0; i < usg->count; i++) {
+				u64 addr;
+				void* p;
+
+				sg_count[i] = usg->sg[i].count;
+				if (sg_count[i] >
+				    ((dev->adapter_info.options &
+				     AAC_OPT_NEW_COMM) ?
+				      (dev->scsi_host_ptr->max_sectors << 9) :
+				      65536)) {
+					kfree(usg);
+					rcode = -EINVAL;
+					goto cleanup;
+				}
+
+				p = kmalloc(sg_count[i], GFP_KERNEL);
+				if(!p) {
+					dprintk((KERN_DEBUG "aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+						sg_count[i], i, usg->count));
+					kfree(usg);
+					rcode = -ENOMEM;
+					goto cleanup;
+				}
+				sg_user[i] = (void __user *)(uintptr_t)usg->sg[i].addr;
+				sg_list[i] = p; // save so we can clean up later
+				sg_indx = i;
+
+				if (flags & SRB_DataOut) {
+					if (copy_from_user(p, sg_user[i],
+						sg_count[i])) {
+						kfree (usg);
+						dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+						rcode = -EFAULT;
+						goto cleanup;
+					}
+				}
+				addr = dma_map_single(&dev->pdev->dev, p,
+						      sg_count[i], data_dir);
+
+				psg->sg[i].addr[0] = cpu_to_le32(addr & 0xffffffff);
+				psg->sg[i].addr[1] = cpu_to_le32(addr>>32);
+				byte_count += sg_count[i];
+				psg->sg[i].count = cpu_to_le32(sg_count[i]);
+			}
+			kfree (usg);
+		}
+		srbcmd->count = cpu_to_le32(byte_count);
+		if (user_srbcmd->sg.count)
+			psg->count = cpu_to_le32(sg_indx+1);
+		else
+			psg->count = 0;
+		status = aac_fib_send(ScsiPortCommand64, srbfib, actual_fibsize, FsaNormal, 1, 1,NULL,NULL);
+	} else {
+		struct user_sgmap* upsg = &user_srbcmd->sg;
+		struct sgmap* psg = &srbcmd->sg;
+
+		if (actual_fibsize64 == fibsize) {
+			struct user_sgmap64* usg = (struct user_sgmap64 *)upsg;
+			for (i = 0; i < upsg->count; i++) {
+				uintptr_t addr;
+				void* p;
+
+				sg_count[i] = usg->sg[i].count;
+				if (sg_count[i] >
+				    ((dev->adapter_info.options &
+				     AAC_OPT_NEW_COMM) ?
+				      (dev->scsi_host_ptr->max_sectors << 9) :
+				      65536)) {
+					rcode = -EINVAL;
+					goto cleanup;
+				}
+				p = kmalloc(sg_count[i], GFP_KERNEL);
+				if (!p) {
+					dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+						sg_count[i], i, usg->count));
+					rcode = -ENOMEM;
+					goto cleanup;
+				}
+				addr = (u64)usg->sg[i].addr[0];
+				addr += ((u64)usg->sg[i].addr[1]) << 32;
+				sg_user[i] = (void __user *)addr;
+				sg_list[i] = p; // save so we can clean up later
+				sg_indx = i;
+
+				if (flags & SRB_DataOut) {
+					if (copy_from_user(p, sg_user[i],
+						sg_count[i])){
+						dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+						rcode = -EFAULT;
+						goto cleanup;
+					}
+				}
+				addr = dma_map_single(&dev->pdev->dev, p,
+						      usg->sg[i].count,
+						      data_dir);
+
+				psg->sg[i].addr = cpu_to_le32(addr & 0xffffffff);
+				byte_count += usg->sg[i].count;
+				psg->sg[i].count = cpu_to_le32(sg_count[i]);
+			}
+		} else {
+			for (i = 0; i < upsg->count; i++) {
+				dma_addr_t addr;
+				void* p;
+
+				sg_count[i] = upsg->sg[i].count;
+				if (sg_count[i] >
+				    ((dev->adapter_info.options &
+				     AAC_OPT_NEW_COMM) ?
+				      (dev->scsi_host_ptr->max_sectors << 9) :
+				      65536)) {
+					rcode = -EINVAL;
+					goto cleanup;
+				}
+				p = kmalloc(sg_count[i], GFP_KERNEL);
+				if (!p) {
+					dprintk((KERN_DEBUG"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\n",
+					  sg_count[i], i, upsg->count));
+					rcode = -ENOMEM;
+					goto cleanup;
+				}
+				sg_user[i] = (void __user *)(uintptr_t)upsg->sg[i].addr;
+				sg_list[i] = p; // save so we can clean up later
+				sg_indx = i;
+
+				if (flags & SRB_DataOut) {
+					if (copy_from_user(p, sg_user[i],
+						sg_count[i])) {
+						dprintk((KERN_DEBUG"aacraid: Could not copy sg data from user\n"));
+						rcode = -EFAULT;
+						goto cleanup;
+					}
+				}
+				addr = dma_map_single(&dev->pdev->dev, p,
+						      sg_count[i], data_dir);
+
+				psg->sg[i].addr = cpu_to_le32(addr);
+				byte_count += sg_count[i];
+				psg->sg[i].count = cpu_to_le32(sg_count[i]);
+			}
+		}
+		srbcmd->count = cpu_to_le32(byte_count);
+		if (user_srbcmd->sg.count)
+			psg->count = cpu_to_le32(sg_indx+1);
+		else
+			psg->count = 0;
+		status = aac_fib_send(ScsiPortCommand, srbfib, actual_fibsize, FsaNormal, 1, 1, NULL, NULL);
+	}
+
+	if (status == -ERESTARTSYS) {
+		rcode = -ERESTARTSYS;
+		goto cleanup;
+	}
+
+	if (status != 0) {
+		dprintk((KERN_DEBUG"aacraid: Could not send raw srb fib to hba\n"));
+		rcode = -ENXIO;
+		goto cleanup;
+	}
+
+	if (flags & SRB_DataIn) {
+		for(i = 0 ; i <= sg_indx; i++){
+			if (copy_to_user(sg_user[i], sg_list[i], sg_count[i])) {
+				dprintk((KERN_DEBUG"aacraid: Could not copy sg data to user\n"));
+				rcode = -EFAULT;
+				goto cleanup;
+
+			}
+		}
+	}
+
+	user_reply = arg + fibsize;
+	if (is_native_device) {
+		struct aac_hba_resp *err =
+			&((struct aac_native_hba *)srbfib->hw_fib_va)->resp.err;
+		struct aac_srb_reply reply;
+
+		memset(&reply, 0, sizeof(reply));
+		reply.status = ST_OK;
+		if (srbfib->flags & FIB_CONTEXT_FLAG_FASTRESP) {
+			/* fast response */
+			reply.srb_status = SRB_STATUS_SUCCESS;
+			reply.scsi_status = 0;
+			reply.data_xfer_length = byte_count;
+			reply.sense_data_size = 0;
+			memset(reply.sense_data, 0, AAC_SENSE_BUFFERSIZE);
+		} else {
+			reply.srb_status = err->service_response;
+			reply.scsi_status = err->status;
+			reply.data_xfer_length = byte_count -
+				le32_to_cpu(err->residual_count);
+			reply.sense_data_size = err->sense_response_data_len;
+			memcpy(reply.sense_data, err->sense_response_buf,
+				AAC_SENSE_BUFFERSIZE);
+		}
+		if (copy_to_user(user_reply, &reply,
+			sizeof(struct aac_srb_reply))) {
+			dprintk((KERN_DEBUG"aacraid: Copy to user failed\n"));
+			rcode = -EFAULT;
+			goto cleanup;
+		}
+	} else {
+		struct aac_srb_reply *reply;
+
+		reply = (struct aac_srb_reply *) fib_data(srbfib);
+		if (copy_to_user(user_reply, reply,
+			sizeof(struct aac_srb_reply))) {
+			dprintk((KERN_DEBUG"aacraid: Copy to user failed\n"));
+			rcode = -EFAULT;
+			goto cleanup;
+		}
+	}
+
+cleanup:
+	kfree(user_srbcmd);
+	if (rcode != -ERESTARTSYS) {
+		for (i = 0; i <= sg_indx; i++)
+			kfree(sg_list[i]);
+		aac_fib_complete(srbfib);
+		aac_fib_free(srbfib);
+	}
+
+	return rcode;
+}
+
+struct aac_pci_info {
+	u32 bus;
+	u32 slot;
+};
+
+
+static int aac_get_pci_info(struct aac_dev* dev, void __user *arg)
+{
+	struct aac_pci_info pci_info;
+
+	pci_info.bus = dev->pdev->bus->number;
+	pci_info.slot = PCI_SLOT(dev->pdev->devfn);
+
+	if (copy_to_user(arg, &pci_info, sizeof(struct aac_pci_info))) {
+		dprintk((KERN_DEBUG "aacraid: Could not copy pci info\n"));
+		return -EFAULT;
+	}
+	return 0;
+}
+
+static int aac_get_hba_info(struct aac_dev *dev, void __user *arg)
+{
+	struct aac_hba_info hbainfo;
+
+	memset(&hbainfo, 0, sizeof(hbainfo));
+	hbainfo.adapter_number		= (u8) dev->id;
+	hbainfo.system_io_bus_number	= dev->pdev->bus->number;
+	hbainfo.device_number		= (dev->pdev->devfn >> 3);
+	hbainfo.function_number		= (dev->pdev->devfn & 0x0007);
+
+	hbainfo.vendor_id		= dev->pdev->vendor;
+	hbainfo.device_id		= dev->pdev->device;
+	hbainfo.sub_vendor_id		= dev->pdev->subsystem_vendor;
+	hbainfo.sub_system_id		= dev->pdev->subsystem_device;
+
+	if (copy_to_user(arg, &hbainfo, sizeof(struct aac_hba_info))) {
+		dprintk((KERN_DEBUG "aacraid: Could not copy hba info\n"));
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+struct aac_reset_iop {
+	u8	reset_type;
+};
+
+static int aac_send_reset_adapter(struct aac_dev *dev, void __user *arg)
+{
+	struct aac_reset_iop reset;
+	int retval;
+
+	if (copy_from_user((void *)&reset, arg, sizeof(struct aac_reset_iop)))
+		return -EFAULT;
+
+	dev->adapter_shutdown = 1;
+
+	mutex_unlock(&dev->ioctl_mutex);
+	retval = aac_reset_adapter(dev, 0, reset.reset_type);
+	mutex_lock(&dev->ioctl_mutex);
+
+	return retval;
+}
+
+int aac_do_ioctl(struct aac_dev *dev, unsigned int cmd, void __user *arg)
+{
+	int status;
+
+	mutex_lock(&dev->ioctl_mutex);
+
+	if (dev->adapter_shutdown) {
+		status = -EACCES;
+		goto cleanup;
+	}
+
+	/*
+	 *	HBA gets first crack
+	 */
+
+	status = aac_dev_ioctl(dev, cmd, arg);
+	if (status != -ENOTTY)
+		goto cleanup;
+
+	switch (cmd) {
+	case FSACTL_MINIPORT_REV_CHECK:
+		status = check_revision(dev, arg);
+		break;
+	case FSACTL_SEND_LARGE_FIB:
+	case FSACTL_SENDFIB:
+		status = ioctl_send_fib(dev, arg);
+		break;
+	case FSACTL_OPEN_GET_ADAPTER_FIB:
+		status = open_getadapter_fib(dev, arg);
+		break;
+	case FSACTL_GET_NEXT_ADAPTER_FIB:
+		status = next_getadapter_fib(dev, arg);
+		break;
+	case FSACTL_CLOSE_GET_ADAPTER_FIB:
+		status = close_getadapter_fib(dev, arg);
+		break;
+	case FSACTL_SEND_RAW_SRB:
+		status = aac_send_raw_srb(dev,arg);
+		break;
+	case FSACTL_GET_PCI_INFO:
+		status = aac_get_pci_info(dev,arg);
+		break;
+	case FSACTL_GET_HBA_INFO:
+		status = aac_get_hba_info(dev, arg);
+		break;
+	case FSACTL_RESET_IOP:
+		status = aac_send_reset_adapter(dev, arg);
+		break;
+
+	default:
+		status = -ENOTTY;
+		break;
+	}
+
+cleanup:
+	mutex_unlock(&dev->ioctl_mutex);
+
+	return status;
+}
+