Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 338 insertions, 0 deletions

diff --git a/drivers/scsi/aha152x.h b/drivers/scsi/aha152x.h
new file mode 100644
index 000000000..efd01877d
--- /dev/null
+++ b/drivers/scsi/aha152x.h
@@ -0,0 +1,338 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _AHA152X_H
+#define _AHA152X_H
+
+/*
+ * $Id: aha152x.h,v 2.7 2004/01/24 11:39:03 fischer Exp $
+ */
+
+/* number of queueable commands
+   (unless we support more than 1 cmd_per_lun this should do) */
+#define AHA152X_MAXQUEUE 7
+
+#define AHA152X_REVID "Adaptec 152x SCSI driver; $Revision: 2.7 $"
+
+/* port addresses */
+#define SCSISEQ      (HOSTIOPORT0+0x00)    /* SCSI sequence control */
+#define SXFRCTL0     (HOSTIOPORT0+0x01)    /* SCSI transfer control 0 */
+#define SXFRCTL1     (HOSTIOPORT0+0x02)    /* SCSI transfer control 1 */
+#define SCSISIG      (HOSTIOPORT0+0x03)    /* SCSI signal in/out */
+#define SCSIRATE     (HOSTIOPORT0+0x04)    /* SCSI rate control */
+#define SELID        (HOSTIOPORT0+0x05)    /* selection/reselection ID */
+#define SCSIID       SELID                 /* SCSI ID */
+#define SCSIDAT      (HOSTIOPORT0+0x06)    /* SCSI latched data */
+#define SCSIBUS      (HOSTIOPORT0+0x07)    /* SCSI data bus */
+#define STCNT0       (HOSTIOPORT0+0x08)    /* SCSI transfer count 0 */
+#define STCNT1       (HOSTIOPORT0+0x09)    /* SCSI transfer count 1 */
+#define STCNT2       (HOSTIOPORT0+0x0a)    /* SCSI transfer count 2 */
+#define SSTAT0       (HOSTIOPORT0+0x0b)    /* SCSI interrupt status 0 */
+#define SSTAT1       (HOSTIOPORT0+0x0c)    /* SCSI interrupt status 1 */
+#define SSTAT2       (HOSTIOPORT0+0x0d)    /* SCSI interrupt status 2 */
+#define SCSITEST     (HOSTIOPORT0+0x0e)    /* SCSI test control */
+#define SSTAT3       SCSITEST              /* SCSI interrupt status 3 */
+#define SSTAT4       (HOSTIOPORT0+0x0f)    /* SCSI status 4 */
+#define SIMODE0      (HOSTIOPORT1+0x10)    /* SCSI interrupt mode 0 */
+#define SIMODE1      (HOSTIOPORT1+0x11)    /* SCSI interrupt mode 1 */
+#define DMACNTRL0    (HOSTIOPORT1+0x12)    /* DMA control 0 */
+#define DMACNTRL1    (HOSTIOPORT1+0x13)    /* DMA control 1 */
+#define DMASTAT      (HOSTIOPORT1+0x14)    /* DMA status */
+#define FIFOSTAT     (HOSTIOPORT1+0x15)    /* FIFO status */
+#define DATAPORT     (HOSTIOPORT1+0x16)    /* DATA port */
+#define BRSTCNTRL    (HOSTIOPORT1+0x18)    /* burst control */
+#define PORTA        (HOSTIOPORT1+0x1a)    /* PORT A */
+#define PORTB        (HOSTIOPORT1+0x1b)    /* PORT B */
+#define REV          (HOSTIOPORT1+0x1c)    /* revision */
+#define STACK        (HOSTIOPORT1+0x1d)    /* stack */
+#define TEST         (HOSTIOPORT1+0x1e)    /* test register */
+
+#define IO_RANGE        0x20
+
+/* used in aha152x_porttest */
+#define O_PORTA         0x1a               /* PORT A */
+#define O_PORTB         0x1b               /* PORT B */
+#define O_DMACNTRL1     0x13               /* DMA control 1 */
+#define O_STACK         0x1d               /* stack */
+
+/* used in tc1550_porttest */
+#define O_TC_PORTA      0x0a               /* PORT A */
+#define O_TC_PORTB      0x0b               /* PORT B */
+#define O_TC_DMACNTRL1  0x03               /* DMA control 1 */
+#define O_TC_STACK      0x0d               /* stack */
+
+/* bits and bitmasks to ports */
+
+/* SCSI sequence control */
+#define TEMODEO      0x80
+#define ENSELO       0x40
+#define ENSELI       0x20
+#define ENRESELI     0x10
+#define ENAUTOATNO   0x08
+#define ENAUTOATNI   0x04
+#define ENAUTOATNP   0x02
+#define SCSIRSTO     0x01
+
+/* SCSI transfer control 0 */
+#define SCSIEN       0x80
+#define DMAEN        0x40
+#define CH1          0x20
+#define CLRSTCNT     0x10
+#define SPIOEN       0x08
+#define CLRCH1       0x02
+
+/* SCSI transfer control 1 */
+#define BITBUCKET    0x80
+#define SWRAPEN      0x40
+#define ENSPCHK      0x20
+#define STIMESEL     0x18    /* mask */
+#define STIMESEL_    3
+#define ENSTIMER     0x04
+#define BYTEALIGN    0x02
+
+/* SCSI signal IN */
+#define SIG_CDI          0x80
+#define SIG_IOI          0x40
+#define SIG_MSGI         0x20
+#define SIG_ATNI         0x10
+#define SIG_SELI         0x08
+#define SIG_BSYI         0x04
+#define SIG_REQI         0x02
+#define SIG_ACKI         0x01
+
+/* SCSI Phases */
+#define P_MASK       (SIG_MSGI|SIG_CDI|SIG_IOI)
+#define P_DATAO      (0)
+#define P_DATAI      (SIG_IOI)
+#define P_CMD        (SIG_CDI)
+#define P_STATUS     (SIG_CDI|SIG_IOI)
+#define P_MSGO       (SIG_MSGI|SIG_CDI)
+#define P_MSGI       (SIG_MSGI|SIG_CDI|SIG_IOI)
+
+/* SCSI signal OUT */
+#define SIG_CDO          0x80
+#define SIG_IOO          0x40
+#define SIG_MSGO         0x20
+#define SIG_ATNO         0x10
+#define SIG_SELO         0x08
+#define SIG_BSYO         0x04
+#define SIG_REQO         0x02
+#define SIG_ACKO         0x01
+
+/* SCSI rate control */
+#define SXFR         0x70    /* mask */
+#define SXFR_        4
+#define SOFS         0x0f    /* mask */
+
+/* SCSI ID */
+#define OID          0x70
+#define OID_         4
+#define TID          0x07
+
+/* SCSI transfer count */
+#define GETSTCNT() ( (GETPORT(STCNT2)<<16) \
+                   + (GETPORT(STCNT1)<< 8) \
+                   + GETPORT(STCNT0) )
+
+#define SETSTCNT(X) { SETPORT(STCNT2, ((X) & 0xFF0000) >> 16); \
+                      SETPORT(STCNT1, ((X) & 0x00FF00) >>  8); \
+                      SETPORT(STCNT0, ((X) & 0x0000FF) ); }
+
+/* SCSI interrupt status */
+#define TARGET       0x80
+#define SELDO        0x40
+#define SELDI        0x20
+#define SELINGO      0x10
+#define SWRAP        0x08
+#define SDONE        0x04
+#define SPIORDY      0x02
+#define DMADONE      0x01
+
+#define SETSDONE     0x80
+#define CLRSELDO     0x40
+#define CLRSELDI     0x20
+#define CLRSELINGO   0x10
+#define CLRSWRAP     0x08
+#define CLRSDONE     0x04
+#define CLRSPIORDY   0x02
+#define CLRDMADONE   0x01
+
+/* SCSI status 1 */
+#define SELTO        0x80
+#define ATNTARG      0x40
+#define SCSIRSTI     0x20
+#define PHASEMIS     0x10
+#define BUSFREE      0x08
+#define SCSIPERR     0x04
+#define PHASECHG     0x02
+#define REQINIT      0x01
+
+#define CLRSELTIMO   0x80
+#define CLRATNO      0x40
+#define CLRSCSIRSTI  0x20
+#define CLRBUSFREE   0x08
+#define CLRSCSIPERR  0x04
+#define CLRPHASECHG  0x02
+#define CLRREQINIT   0x01
+
+/* SCSI status 2 */
+#define SOFFSET      0x20
+#define SEMPTY       0x10
+#define SFULL        0x08
+#define SFCNT        0x07    /* mask */
+
+/* SCSI status 3 */
+#define SCSICNT      0xf0    /* mask */
+#define SCSICNT_     4
+#define OFFCNT       0x0f    /* mask */
+
+/* SCSI TEST control */
+#define SCTESTU      0x08
+#define SCTESTD      0x04
+#define STCTEST      0x01
+
+/* SCSI status 4 */
+#define SYNCERR      0x04
+#define FWERR        0x02
+#define FRERR        0x01
+
+#define CLRSYNCERR   0x04
+#define CLRFWERR     0x02
+#define CLRFRERR     0x01
+
+/* SCSI interrupt mode 0 */
+#define ENSELDO      0x40
+#define ENSELDI      0x20
+#define ENSELINGO    0x10
+#define ENSWRAP      0x08
+#define ENSDONE      0x04
+#define ENSPIORDY    0x02
+#define ENDMADONE    0x01
+
+/* SCSI interrupt mode 1 */
+#define ENSELTIMO    0x80
+#define ENATNTARG    0x40
+#define ENSCSIRST    0x20
+#define ENPHASEMIS   0x10
+#define ENBUSFREE    0x08
+#define ENSCSIPERR   0x04
+#define ENPHASECHG   0x02
+#define ENREQINIT    0x01
+
+/* DMA control 0 */
+#define ENDMA        0x80
+#define _8BIT        0x40
+#define DMA          0x20
+#define WRITE_READ   0x08
+#define INTEN        0x04
+#define RSTFIFO      0x02
+#define SWINT        0x01
+
+/* DMA control 1 */
+#define PWRDWN       0x80
+#define STK          0x07    /* mask */
+
+/* DMA status */
+#define ATDONE       0x80
+#define WORDRDY      0x40
+#define INTSTAT      0x20
+#define DFIFOFULL    0x10
+#define DFIFOEMP     0x08
+
+/* BURST control */
+#define BON          0xf0
+#define BOFF         0x0f
+
+/* TEST REGISTER */
+#define BOFFTMR      0x40
+#define BONTMR       0x20
+#define STCNTH       0x10
+#define STCNTM       0x08
+#define STCNTL       0x04
+#define SCSIBLK      0x02
+#define DMABLK       0x01
+
+/* On the AHA-152x board PORTA and PORTB contain
+   some information about the board's configuration. */
+typedef union {
+  struct {
+    unsigned reserved:2;    /* reserved */
+    unsigned tardisc:1;     /* Target disconnect: 0=disabled, 1=enabled */
+    unsigned syncneg:1;     /* Initial sync neg: 0=disabled, 1=enabled */
+    unsigned msgclasses:2;  /* Message classes
+                                 0=#4
+                                 1=#0, #1, #2, #3, #4
+                                 2=#0, #3, #4
+                                 3=#0, #4
+                             */
+    unsigned boot:1;        /* boot: 0=disabled, 1=enabled */
+    unsigned dma:1;         /* Transfer mode: 0=PIO; 1=DMA */
+    unsigned id:3;          /* SCSI-id */
+    unsigned irq:2;         /* IRQ-Channel: 0,3=12, 1=10, 2=11 */
+    unsigned dmachan:2;     /* DMA-Channel: 0=0, 1=5, 2=6, 3=7 */
+    unsigned parity:1;      /* SCSI-parity: 1=enabled 0=disabled */
+  } fields;
+  unsigned short port;
+} aha152x_config ;
+
+#define cf_parity     fields.parity
+#define cf_dmachan    fields.dmachan
+#define cf_irq        fields.irq
+#define cf_id         fields.id
+#define cf_dma        fields.dma
+#define cf_boot       fields.boot
+#define cf_msgclasses fields.msgclasses
+#define cf_syncneg    fields.syncneg
+#define cf_tardisc    fields.tardisc
+#define cf_port       port
+
+/* Some macros to manipulate ports and their bits */
+
+#define SETPORT(PORT, VAL)	outb( (VAL), (PORT) )
+#define GETPORT(PORT)		inb( PORT )
+#define SETBITS(PORT, BITS)	outb( (inb(PORT) | (BITS)), (PORT) )
+#define CLRBITS(PORT, BITS)	outb( (inb(PORT) & ~(BITS)), (PORT) )
+#define TESTHI(PORT, BITS)	((inb(PORT) & (BITS)) == (BITS))
+#define TESTLO(PORT, BITS)	((inb(PORT) & (BITS)) == 0)
+
+#define SETRATE(RATE)		SETPORT(SCSIRATE,(RATE) & 0x7f)
+
+#if defined(AHA152X_DEBUG)
+enum {
+  debug_procinfo  = 0x0001,
+  debug_queue     = 0x0002,
+  debug_locking   = 0x0004,
+  debug_intr      = 0x0008,
+  debug_selection = 0x0010,
+  debug_msgo      = 0x0020,
+  debug_msgi      = 0x0040,
+  debug_status    = 0x0080,
+  debug_cmd       = 0x0100,
+  debug_datai     = 0x0200,
+  debug_datao     = 0x0400,
+  debug_eh	  = 0x0800,
+  debug_done      = 0x1000,
+  debug_phases    = 0x2000,
+};
+#endif
+
+/* for the pcmcia stub */
+struct aha152x_setup {
+	int io_port;
+	int irq;
+	int scsiid;
+	int reconnect;
+	int parity;
+	int synchronous;
+	int delay;
+	int ext_trans;
+	int tc1550;
+#if defined(AHA152X_DEBUG)
+	int debug;
+#endif
+	char *conf;
+};
+
+struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *);
+void aha152x_release(struct Scsi_Host *);
+int aha152x_host_reset_host(struct Scsi_Host *);
+
+#endif /* _AHA152X_H */