Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 369 insertions, 0 deletions

diff --git a/drivers/scsi/csiostor/csio_hw_t5.c b/drivers/scsi/csiostor/csio_hw_t5.c
new file mode 100644
index 000000000..86fded97d
--- /dev/null
+++ b/drivers/scsi/csiostor/csio_hw_t5.c
@@ -0,0 +1,369 @@
+/*
+ * This file is part of the Chelsio FCoE driver for Linux.
+ *
+ * Copyright (c) 2008-2013 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "csio_hw.h"
+#include "csio_init.h"
+
+static int
+csio_t5_set_mem_win(struct csio_hw *hw, uint32_t win)
+{
+	u32 mem_win_base;
+	/*
+	 * Truncation intentional: we only read the bottom 32-bits of the
+	 * 64-bit BAR0/BAR1 ...  We use the hardware backdoor mechanism to
+	 * read BAR0 instead of using pci_resource_start() because we could be
+	 * operating from within a Virtual Machine which is trapping our
+	 * accesses to our Configuration Space and we need to set up the PCI-E
+	 * Memory Window decoders with the actual addresses which will be
+	 * coming across the PCI-E link.
+	 */
+
+	/* For T5, only relative offset inside the PCIe BAR is passed */
+	mem_win_base = MEMWIN_BASE;
+
+	/*
+	 * Set up memory window for accessing adapter memory ranges.  (Read
+	 * back MA register to ensure that changes propagate before we attempt
+	 * to use the new values.)
+	 */
+	csio_wr_reg32(hw, mem_win_base | BIR_V(0) |
+			  WINDOW_V(ilog2(MEMWIN_APERTURE) - 10),
+			  PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win));
+	csio_rd_reg32(hw,
+		      PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win));
+
+	return 0;
+}
+
+/*
+ * Interrupt handler for the PCIE module.
+ */
+static void
+csio_t5_pcie_intr_handler(struct csio_hw *hw)
+{
+	static struct intr_info pcie_intr_info[] = {
+		{ MSTGRPPERR_F, "Master Response Read Queue parity error",
+		-1, 1 },
+		{ MSTTIMEOUTPERR_F, "Master Timeout FIFO parity error", -1, 1 },
+		{ MSIXSTIPERR_F, "MSI-X STI SRAM parity error", -1, 1 },
+		{ MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 },
+		{ MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 },
+		{ MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 },
+		{ MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 },
+		{ PIOCPLGRPPERR_F, "PCI PIO completion Group FIFO parity error",
+		-1, 1 },
+		{ PIOREQGRPPERR_F, "PCI PIO request Group FIFO parity error",
+		-1, 1 },
+		{ TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 },
+		{ MSTTAGQPERR_F, "PCI master tag queue parity error", -1, 1 },
+		{ CREQPERR_F, "PCI CMD channel request parity error", -1, 1 },
+		{ CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 },
+		{ DREQWRPERR_F, "PCI DMA channel write request parity error",
+		-1, 1 },
+		{ DREQPERR_F, "PCI DMA channel request parity error", -1, 1 },
+		{ DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 },
+		{ HREQWRPERR_F, "PCI HMA channel count parity error", -1, 1 },
+		{ HREQPERR_F, "PCI HMA channel request parity error", -1, 1 },
+		{ HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 },
+		{ CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 },
+		{ FIDPERR_F, "PCI FID parity error", -1, 1 },
+		{ VFIDPERR_F, "PCI INTx clear parity error", -1, 1 },
+		{ MAGRPPERR_F, "PCI MA group FIFO parity error", -1, 1 },
+		{ PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 },
+		{ IPRXHDRGRPPERR_F, "PCI IP Rx header group parity error",
+		-1, 1 },
+		{ IPRXDATAGRPPERR_F, "PCI IP Rx data group parity error",
+		-1, 1 },
+		{ RPLPERR_F, "PCI IP replay buffer parity error", -1, 1 },
+		{ IPSOTPERR_F, "PCI IP SOT buffer parity error", -1, 1 },
+		{ TRGT1GRPPERR_F, "PCI TRGT1 group FIFOs parity error", -1, 1 },
+		{ READRSPERR_F, "Outbound read error", -1, 0 },
+		{ 0, NULL, 0, 0 }
+	};
+
+	int fat;
+	fat = csio_handle_intr_status(hw, PCIE_INT_CAUSE_A, pcie_intr_info);
+	if (fat)
+		csio_hw_fatal_err(hw);
+}
+
+/*
+ * csio_t5_flash_cfg_addr - return the address of the flash configuration file
+ * @hw: the HW module
+ *
+ * Return the address within the flash where the Firmware Configuration
+ * File is stored.
+ */
+static unsigned int
+csio_t5_flash_cfg_addr(struct csio_hw *hw)
+{
+	return FLASH_CFG_START;
+}
+
+/*
+ *      csio_t5_mc_read - read from MC through backdoor accesses
+ *      @hw: the hw module
+ *      @idx: index to the register
+ *      @addr: address of first byte requested
+ *      @data: 64 bytes of data containing the requested address
+ *      @ecc: where to store the corresponding 64-bit ECC word
+ *
+ *      Read 64 bytes of data from MC starting at a 64-byte-aligned address
+ *      that covers the requested address @addr.  If @parity is not %NULL it
+ *      is assigned the 64-bit ECC word for the read data.
+ */
+static int
+csio_t5_mc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
+		uint64_t *ecc)
+{
+	int i;
+	uint32_t mc_bist_cmd_reg, mc_bist_cmd_addr_reg, mc_bist_cmd_len_reg;
+	uint32_t mc_bist_data_pattern_reg;
+
+	mc_bist_cmd_reg = MC_REG(MC_P_BIST_CMD_A, idx);
+	mc_bist_cmd_addr_reg = MC_REG(MC_P_BIST_CMD_ADDR_A, idx);
+	mc_bist_cmd_len_reg = MC_REG(MC_P_BIST_CMD_LEN_A, idx);
+	mc_bist_data_pattern_reg = MC_REG(MC_P_BIST_DATA_PATTERN_A, idx);
+
+	if (csio_rd_reg32(hw, mc_bist_cmd_reg) & START_BIST_F)
+		return -EBUSY;
+	csio_wr_reg32(hw, addr & ~0x3fU, mc_bist_cmd_addr_reg);
+	csio_wr_reg32(hw, 64, mc_bist_cmd_len_reg);
+	csio_wr_reg32(hw, 0xc, mc_bist_data_pattern_reg);
+	csio_wr_reg32(hw, BIST_OPCODE_V(1) | START_BIST_F |  BIST_CMD_GAP_V(1),
+		      mc_bist_cmd_reg);
+	i = csio_hw_wait_op_done_val(hw, mc_bist_cmd_reg, START_BIST_F,
+				     0, 10, 1, NULL);
+	if (i)
+		return i;
+
+#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA_A, i)
+
+	for (i = 15; i >= 0; i--)
+		*data++ = htonl(csio_rd_reg32(hw, MC_DATA(i)));
+	if (ecc)
+		*ecc = csio_rd_reg64(hw, MC_DATA(16));
+#undef MC_DATA
+	return 0;
+}
+
+/*
+ *      csio_t5_edc_read - read from EDC through backdoor accesses
+ *      @hw: the hw module
+ *      @idx: which EDC to access
+ *      @addr: address of first byte requested
+ *      @data: 64 bytes of data containing the requested address
+ *      @ecc: where to store the corresponding 64-bit ECC word
+ *
+ *      Read 64 bytes of data from EDC starting at a 64-byte-aligned address
+ *      that covers the requested address @addr.  If @parity is not %NULL it
+ *      is assigned the 64-bit ECC word for the read data.
+ */
+static int
+csio_t5_edc_read(struct csio_hw *hw, int idx, uint32_t addr, __be32 *data,
+		uint64_t *ecc)
+{
+	int i;
+	uint32_t edc_bist_cmd_reg, edc_bist_cmd_addr_reg, edc_bist_cmd_len_reg;
+	uint32_t edc_bist_cmd_data_pattern;
+
+/*
+ * These macro are missing in t4_regs.h file.
+ */
+#define EDC_STRIDE_T5 (EDC_T51_BASE_ADDR - EDC_T50_BASE_ADDR)
+#define EDC_REG_T5(reg, idx) (reg + EDC_STRIDE_T5 * idx)
+
+	edc_bist_cmd_reg = EDC_REG_T5(EDC_H_BIST_CMD_A, idx);
+	edc_bist_cmd_addr_reg = EDC_REG_T5(EDC_H_BIST_CMD_ADDR_A, idx);
+	edc_bist_cmd_len_reg = EDC_REG_T5(EDC_H_BIST_CMD_LEN_A, idx);
+	edc_bist_cmd_data_pattern = EDC_REG_T5(EDC_H_BIST_DATA_PATTERN_A, idx);
+#undef EDC_REG_T5
+#undef EDC_STRIDE_T5
+
+	if (csio_rd_reg32(hw, edc_bist_cmd_reg) & START_BIST_F)
+		return -EBUSY;
+	csio_wr_reg32(hw, addr & ~0x3fU, edc_bist_cmd_addr_reg);
+	csio_wr_reg32(hw, 64, edc_bist_cmd_len_reg);
+	csio_wr_reg32(hw, 0xc, edc_bist_cmd_data_pattern);
+	csio_wr_reg32(hw, BIST_OPCODE_V(1) | START_BIST_F |  BIST_CMD_GAP_V(1),
+		      edc_bist_cmd_reg);
+	i = csio_hw_wait_op_done_val(hw, edc_bist_cmd_reg, START_BIST_F,
+				     0, 10, 1, NULL);
+	if (i)
+		return i;
+
+#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA_A, i) + idx)
+
+	for (i = 15; i >= 0; i--)
+		*data++ = htonl(csio_rd_reg32(hw, EDC_DATA(i)));
+	if (ecc)
+		*ecc = csio_rd_reg64(hw, EDC_DATA(16));
+#undef EDC_DATA
+	return 0;
+}
+
+/*
+ * csio_t5_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
+ * @hw: the csio_hw
+ * @win: PCI-E memory Window to use
+ * @mtype: memory type: MEM_EDC0, MEM_EDC1, MEM_MC0 (or MEM_MC) or MEM_MC1
+ * @addr: address within indicated memory type
+ * @len: amount of memory to transfer
+ * @buf: host memory buffer
+ * @dir: direction of transfer 1 => read, 0 => write
+ *
+ * Reads/writes an [almost] arbitrary memory region in the firmware: the
+ * firmware memory address, length and host buffer must be aligned on
+ * 32-bit boundaries.  The memory is transferred as a raw byte sequence
+ * from/to the firmware's memory.  If this memory contains data
+ * structures which contain multi-byte integers, it's the callers
+ * responsibility to perform appropriate byte order conversions.
+ */
+static int
+csio_t5_memory_rw(struct csio_hw *hw, u32 win, int mtype, u32 addr,
+		u32 len, uint32_t *buf, int dir)
+{
+	u32 pos, start, offset, memoffset;
+	u32 edc_size, mc_size, win_pf, mem_reg, mem_aperture, mem_base;
+
+	/*
+	 * Argument sanity checks ...
+	 */
+	if ((addr & 0x3) || (len & 0x3))
+		return -EINVAL;
+
+	/* Offset into the region of memory which is being accessed
+	 * MEM_EDC0 = 0
+	 * MEM_EDC1 = 1
+	 * MEM_MC   = 2 -- T4
+	 * MEM_MC0  = 2 -- For T5
+	 * MEM_MC1  = 3 -- For T5
+	 */
+	edc_size  = EDRAM0_SIZE_G(csio_rd_reg32(hw, MA_EDRAM0_BAR_A));
+	if (mtype != MEM_MC1)
+		memoffset = (mtype * (edc_size * 1024 * 1024));
+	else {
+		mc_size = EXT_MEM_SIZE_G(csio_rd_reg32(hw,
+						       MA_EXT_MEMORY_BAR_A));
+		memoffset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
+	}
+
+	/* Determine the PCIE_MEM_ACCESS_OFFSET */
+	addr = addr + memoffset;
+
+	/*
+	 * Each PCI-E Memory Window is programmed with a window size -- or
+	 * "aperture" -- which controls the granularity of its mapping onto
+	 * adapter memory.  We need to grab that aperture in order to know
+	 * how to use the specified window.  The window is also programmed
+	 * with the base address of the Memory Window in BAR0's address
+	 * space.  For T4 this is an absolute PCI-E Bus Address.  For T5
+	 * the address is relative to BAR0.
+	 */
+	mem_reg = csio_rd_reg32(hw,
+			PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, win));
+	mem_aperture = 1 << (WINDOW_V(mem_reg) + 10);
+	mem_base = PCIEOFST_G(mem_reg) << 10;
+
+	start = addr & ~(mem_aperture-1);
+	offset = addr - start;
+	win_pf = PFNUM_V(hw->pfn);
+
+	csio_dbg(hw, "csio_t5_memory_rw: mem_reg: 0x%x, mem_aperture: 0x%x\n",
+		 mem_reg, mem_aperture);
+	csio_dbg(hw, "csio_t5_memory_rw: mem_base: 0x%x, mem_offset: 0x%x\n",
+		 mem_base, memoffset);
+	csio_dbg(hw, "csio_t5_memory_rw: start:0x%x, offset:0x%x, win_pf:%d\n",
+		 start, offset, win_pf);
+	csio_dbg(hw, "csio_t5_memory_rw: mtype: %d, addr: 0x%x, len: %d\n",
+		 mtype, addr, len);
+
+	for (pos = start; len > 0; pos += mem_aperture, offset = 0) {
+		/*
+		 * Move PCI-E Memory Window to our current transfer
+		 * position.  Read it back to ensure that changes propagate
+		 * before we attempt to use the new value.
+		 */
+		csio_wr_reg32(hw, pos | win_pf,
+			PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win));
+		csio_rd_reg32(hw,
+			PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win));
+
+		while (offset < mem_aperture && len > 0) {
+			if (dir)
+				*buf++ = csio_rd_reg32(hw, mem_base + offset);
+			else
+				csio_wr_reg32(hw, *buf++, mem_base + offset);
+
+			offset += sizeof(__be32);
+			len -= sizeof(__be32);
+		}
+	}
+	return 0;
+}
+
+/*
+ * csio_t5_dfs_create_ext_mem - setup debugfs for MC0 or MC1 to read the values
+ * @hw: the csio_hw
+ *
+ * This function creates files in the debugfs with external memory region
+ * MC0 & MC1.
+ */
+static void
+csio_t5_dfs_create_ext_mem(struct csio_hw *hw)
+{
+	u32 size;
+	int i = csio_rd_reg32(hw, MA_TARGET_MEM_ENABLE_A);
+
+	if (i & EXT_MEM_ENABLE_F) {
+		size = csio_rd_reg32(hw, MA_EXT_MEMORY_BAR_A);
+		csio_add_debugfs_mem(hw, "mc0", MEM_MC0,
+				     EXT_MEM_SIZE_G(size));
+	}
+	if (i & EXT_MEM1_ENABLE_F) {
+		size = csio_rd_reg32(hw, MA_EXT_MEMORY1_BAR_A);
+		csio_add_debugfs_mem(hw, "mc1", MEM_MC1,
+				     EXT_MEM_SIZE_G(size));
+	}
+}
+
+/* T5 adapter specific function */
+struct csio_hw_chip_ops t5_ops = {
+	.chip_set_mem_win		= csio_t5_set_mem_win,
+	.chip_pcie_intr_handler		= csio_t5_pcie_intr_handler,
+	.chip_flash_cfg_addr		= csio_t5_flash_cfg_addr,
+	.chip_mc_read			= csio_t5_mc_read,
+	.chip_edc_read			= csio_t5_edc_read,
+	.chip_memory_rw			= csio_t5_memory_rw,
+	.chip_dfs_create_ext_mem	= csio_t5_dfs_create_ext_mem,
+};