Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 174 insertions, 0 deletions

diff --git a/drivers/scsi/elx/efct/efct_io.h b/drivers/scsi/elx/efct/efct_io.h
new file mode 100644
index 000000000..bb0f51811
--- /dev/null
+++ b/drivers/scsi/elx/efct/efct_io.h
@@ -0,0 +1,174 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2021 Broadcom. All Rights Reserved. The term
+ * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.
+ */
+
+#if !defined(__EFCT_IO_H__)
+#define __EFCT_IO_H__
+
+#include "efct_lio.h"
+
+#define EFCT_LOG_ENABLE_IO_ERRORS(efct)		\
+		(((efct) != NULL) ? (((efct)->logmask & (1U << 6)) != 0) : 0)
+
+#define io_error_log(io, fmt, ...)  \
+	do { \
+		if (EFCT_LOG_ENABLE_IO_ERRORS(io->efct)) \
+			efc_log_warn(io->efct, fmt, ##__VA_ARGS__); \
+	} while (0)
+
+#define SCSI_CMD_BUF_LENGTH	48
+#define SCSI_RSP_BUF_LENGTH	(FCP_RESP_WITH_EXT + SCSI_SENSE_BUFFERSIZE)
+#define EFCT_NUM_SCSI_IOS	8192
+
+enum efct_io_type {
+	EFCT_IO_TYPE_IO = 0,
+	EFCT_IO_TYPE_ELS,
+	EFCT_IO_TYPE_CT,
+	EFCT_IO_TYPE_CT_RESP,
+	EFCT_IO_TYPE_BLS_RESP,
+	EFCT_IO_TYPE_ABORT,
+
+	EFCT_IO_TYPE_MAX,
+};
+
+enum efct_els_state {
+	EFCT_ELS_REQUEST = 0,
+	EFCT_ELS_REQUEST_DELAYED,
+	EFCT_ELS_REQUEST_DELAY_ABORT,
+	EFCT_ELS_REQ_ABORT,
+	EFCT_ELS_REQ_ABORTED,
+	EFCT_ELS_ABORT_IO_COMPL,
+};
+
+/**
+ * Scsi target IO object
+ * @efct:		pointer back to efct
+ * @instance_index:	unique instance index value
+ * @io:			IO display name
+ * @node:		pointer to node
+ * @list_entry:		io list entry
+ * @io_pending_link:	io pending list entry
+ * @ref:		reference counter
+ * @release:		release callback function
+ * @init_task_tag:	initiator task tag (OX_ID) for back-end and SCSI logging
+ * @tgt_task_tag:	target task tag (RX_ID) for back-end and SCSI logging
+ * @hw_tag:		HW layer unique IO id
+ * @tag:		unique IO identifier
+ * @sgl:		SGL
+ * @sgl_allocated:	Number of allocated SGEs
+ * @sgl_count:		Number of SGEs in this SGL
+ * @tgt_io:		backend target private IO data
+ * @exp_xfer_len:	expected data transfer length, based on FC header
+ * @hw_priv:		Declarations private to HW/SLI
+ * @io_type:		indicates what this struct efct_io structure is used for
+ * @hio:		hw io object
+ * @transferred:	Number of bytes transferred
+ * @auto_resp:		set if auto_trsp was set
+ * @low_latency:	set if low latency request
+ * @wq_steering:	selected WQ steering request
+ * @wq_class:		selected WQ class if steering is class
+ * @xfer_req:		transfer size for current request
+ * @scsi_tgt_cb:	target callback function
+ * @scsi_tgt_cb_arg:	target callback function argument
+ * @abort_cb:		abort callback function
+ * @abort_cb_arg:	abort callback function argument
+ * @bls_cb:		BLS callback function
+ * @bls_cb_arg:		BLS callback function argument
+ * @tmf_cmd:		TMF command being processed
+ * @abort_rx_id:	rx_id from the ABTS that initiated the command abort
+ * @cmd_tgt:		True if this is a Target command
+ * @send_abts:		when aborting, indicates ABTS is to be sent
+ * @cmd_ini:		True if this is an Initiator command
+ * @seq_init:		True if local node has sequence initiative
+ * @iparam:		iparams for hw io send call
+ * @hio_type:		HW IO type
+ * @wire_len:		wire length
+ * @hw_cb:		saved HW callback
+ * @io_to_abort:	for abort handling, pointer to IO to abort
+ * @rspbuf:		SCSI Response buffer
+ * @timeout:		Timeout value in seconds for this IO
+ * @cs_ctl:		CS_CTL priority for this IO
+ * @io_free:		Is io object in freelist
+ * @app_id:		application id
+ */
+struct efct_io {
+	struct efct		*efct;
+	u32			instance_index;
+	const char		*display_name;
+	struct efct_node	*node;
+
+	struct list_head	list_entry;
+	struct list_head	io_pending_link;
+	struct kref		ref;
+	void (*release)(struct kref *arg);
+	u32			init_task_tag;
+	u32			tgt_task_tag;
+	u32			hw_tag;
+	u32			tag;
+	struct efct_scsi_sgl	*sgl;
+	u32			sgl_allocated;
+	u32			sgl_count;
+	struct efct_scsi_tgt_io tgt_io;
+	u32			exp_xfer_len;
+
+	void			*hw_priv;
+
+	enum efct_io_type	io_type;
+	struct efct_hw_io	*hio;
+	size_t			transferred;
+
+	bool			auto_resp;
+	bool			low_latency;
+	u8			wq_steering;
+	u8			wq_class;
+	u64			xfer_req;
+	efct_scsi_io_cb_t	scsi_tgt_cb;
+	void			*scsi_tgt_cb_arg;
+	efct_scsi_io_cb_t	abort_cb;
+	void			*abort_cb_arg;
+	efct_scsi_io_cb_t	bls_cb;
+	void			*bls_cb_arg;
+	enum efct_scsi_tmf_cmd	tmf_cmd;
+	u16			abort_rx_id;
+
+	bool			cmd_tgt;
+	bool			send_abts;
+	bool			cmd_ini;
+	bool			seq_init;
+	union efct_hw_io_param_u iparam;
+	enum efct_hw_io_type	hio_type;
+	u64			wire_len;
+	void			*hw_cb;
+
+	struct efct_io		*io_to_abort;
+
+	struct efc_dma		rspbuf;
+	u32			timeout;
+	u8			cs_ctl;
+	u8			io_free;
+	u32			app_id;
+};
+
+struct efct_io_cb_arg {
+	int status;
+	int ext_status;
+	void *app;
+};
+
+struct efct_io_pool *
+efct_io_pool_create(struct efct *efct, u32 num_sgl);
+int
+efct_io_pool_free(struct efct_io_pool *io_pool);
+u32
+efct_io_pool_allocated(struct efct_io_pool *io_pool);
+
+struct efct_io *
+efct_io_pool_io_alloc(struct efct_io_pool *io_pool);
+void
+efct_io_pool_io_free(struct efct_io_pool *io_pool, struct efct_io *io);
+struct efct_io *
+efct_io_find_tgt_io(struct efct *efct, struct efct_node *node,
+		    u16 ox_id, u16 rx_id);
+#endif /* __EFCT_IO_H__ */