Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 768 insertions, 0 deletions

diff --git a/drivers/scsi/fnic/fcpio.h b/drivers/scsi/fnic/fcpio.h
new file mode 100644
index 000000000..54a0b2ba8
--- /dev/null
+++ b/drivers/scsi/fnic/fcpio.h
@@ -0,0 +1,768 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc.  All rights reserved.
+ */
+#ifndef _FCPIO_H_
+#define _FCPIO_H_
+
+#include <linux/if_ether.h>
+
+/*
+ * This header file includes all of the data structures used for
+ * communication by the host driver to the fcp firmware.
+ */
+
+/*
+ * Exchange and sequence id space allocated to the host driver
+ */
+#define FCPIO_HOST_EXCH_RANGE_START         0x1000
+#define FCPIO_HOST_EXCH_RANGE_END           0x1fff
+#define FCPIO_HOST_SEQ_ID_RANGE_START       0x80
+#define FCPIO_HOST_SEQ_ID_RANGE_END         0xff
+
+/*
+ * Command entry type
+ */
+enum fcpio_type {
+	/*
+	 * Initiator request types
+	 */
+	FCPIO_ICMND_16 = 0x1,
+	FCPIO_ICMND_32,
+	FCPIO_ICMND_CMPL,
+	FCPIO_ITMF,
+	FCPIO_ITMF_CMPL,
+
+	/*
+	 * Target request types
+	 */
+	FCPIO_TCMND_16 = 0x11,
+	FCPIO_TCMND_32,
+	FCPIO_TDATA,
+	FCPIO_TXRDY,
+	FCPIO_TRSP,
+	FCPIO_TDRSP_CMPL,
+	FCPIO_TTMF,
+	FCPIO_TTMF_ACK,
+	FCPIO_TABORT,
+	FCPIO_TABORT_CMPL,
+
+	/*
+	 * Misc request types
+	 */
+	FCPIO_ACK = 0x20,
+	FCPIO_RESET,
+	FCPIO_RESET_CMPL,
+	FCPIO_FLOGI_REG,
+	FCPIO_FLOGI_REG_CMPL,
+	FCPIO_ECHO,
+	FCPIO_ECHO_CMPL,
+	FCPIO_LUNMAP_CHNG,
+	FCPIO_LUNMAP_REQ,
+	FCPIO_LUNMAP_REQ_CMPL,
+	FCPIO_FLOGI_FIP_REG,
+	FCPIO_FLOGI_FIP_REG_CMPL,
+};
+
+/*
+ * Header status codes from the firmware
+ */
+enum fcpio_status {
+	FCPIO_SUCCESS = 0,              /* request was successful */
+
+	/*
+	 * If a request to the firmware is rejected, the original request
+	 * header will be returned with the status set to one of the following:
+	 */
+	FCPIO_INVALID_HEADER,    /* header contains invalid data */
+	FCPIO_OUT_OF_RESOURCE,   /* out of resources to complete request */
+	FCPIO_INVALID_PARAM,     /* some parameter in request is invalid */
+	FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */
+	FCPIO_IO_NOT_FOUND,      /* requested I/O was not found */
+
+	/*
+	 * Once a request is processed, the firmware will usually return
+	 * a cmpl message type.  In cases where errors occurred,
+	 * the header status field would be filled in with one of the following:
+	 */
+	FCPIO_ABORTED = 0x41,     /* request was aborted */
+	FCPIO_TIMEOUT,            /* request was timed out */
+	FCPIO_SGL_INVALID,        /* request was aborted due to sgl error */
+	FCPIO_MSS_INVALID,        /* request was aborted due to mss error */
+	FCPIO_DATA_CNT_MISMATCH,  /* recv/sent more/less data than exp. */
+	FCPIO_FW_ERR,             /* request was terminated due to fw error */
+	FCPIO_ITMF_REJECTED,      /* itmf req was rejected by remote node */
+	FCPIO_ITMF_FAILED,        /* itmf req was failed by remote node */
+	FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */
+	FCPIO_CMND_REJECTED,      /* request was invalid and rejected */
+	FCPIO_NO_PATH_AVAIL,      /* no paths to the lun was available */
+	FCPIO_PATH_FAILED,        /* i/o sent to current path failed */
+	FCPIO_LUNMAP_CHNG_PEND,   /* i/o rejected due to lunmap change */
+};
+
+/*
+ * The header command tag.  All host requests will use the "tag" field
+ * to mark commands with a unique tag.  When the firmware responds to
+ * a host request, it will copy the tag field into the response.
+ *
+ * The only firmware requests that will use the rx_id/ox_id fields instead
+ * of the tag field will be the target command and target task management
+ * requests.  These two requests do not have corresponding host requests
+ * since they come directly from the FC initiator on the network.
+ */
+struct fcpio_tag {
+	union {
+		u32 req_id;
+		struct {
+			u16 rx_id;
+			u16 ox_id;
+		} ex_id;
+	} u;
+};
+
+static inline void
+fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id)
+{
+	tag->u.req_id = id;
+}
+
+static inline void
+fcpio_tag_id_dec(struct fcpio_tag *tag, u32 *id)
+{
+	*id = tag->u.req_id;
+}
+
+static inline void
+fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id)
+{
+	tag->u.ex_id.rx_id = rx_id;
+	tag->u.ex_id.ox_id = ox_id;
+}
+
+static inline void
+fcpio_tag_exid_dec(struct fcpio_tag *tag, u16 *ox_id, u16 *rx_id)
+{
+	*rx_id = tag->u.ex_id.rx_id;
+	*ox_id = tag->u.ex_id.ox_id;
+}
+
+/*
+ * The header for an fcpio request, whether from the firmware or from the
+ * host driver
+ */
+struct fcpio_header {
+	u8            type;           /* enum fcpio_type */
+	u8            status;         /* header status entry */
+	u16           _resvd;         /* reserved */
+	struct fcpio_tag    tag;      /* header tag */
+};
+
+static inline void
+fcpio_header_enc(struct fcpio_header *hdr,
+		 u8 type, u8 status,
+		 struct fcpio_tag tag)
+{
+	hdr->type = type;
+	hdr->status = status;
+	hdr->_resvd = 0;
+	hdr->tag = tag;
+}
+
+static inline void
+fcpio_header_dec(struct fcpio_header *hdr,
+		 u8 *type, u8 *status,
+		 struct fcpio_tag *tag)
+{
+	*type = hdr->type;
+	*status = hdr->status;
+	*tag = hdr->tag;
+}
+
+#define CDB_16      16
+#define CDB_32      32
+#define LUN_ADDRESS 8
+
+/*
+ * fcpio_icmnd_16: host -> firmware request
+ *
+ * used for sending out an initiator SCSI 16-byte command
+ */
+struct fcpio_icmnd_16 {
+	u32	  lunmap_id;		/* index into lunmap table */
+	u8	  special_req_flags;	/* special exchange request flags */
+	u8	  _resvd0[3];	        /* reserved */
+	u32	  sgl_cnt;		/* scatter-gather list count */
+	u32	  sense_len;		/* sense buffer length */
+	u64	  sgl_addr;		/* scatter-gather list addr */
+	u64	  sense_addr;		/* sense buffer address */
+	u8	  crn;			/* SCSI Command Reference No. */
+	u8	  pri_ta;		/* SCSI Priority and Task attribute */
+	u8	  _resvd1;		/* reserved: should be 0 */
+	u8	  flags;		/* command flags */
+	u8	  scsi_cdb[CDB_16];	/* SCSI Cmnd Descriptor Block */
+	u32	  data_len;		/* length of data expected */
+	u8	  lun[LUN_ADDRESS];	/* FC vNIC only: LUN address */
+	u8	  _resvd2;		/* reserved */
+	u8	  d_id[3];		/* FC vNIC only: Target D_ID */
+	u16	  mss;			/* FC vNIC only: max burst */
+	u16	  _resvd3;		/* reserved */
+	u32	  r_a_tov;		/* FC vNIC only: Res. Alloc Timeout */
+	u32	  e_d_tov;	        /* FC vNIC only: Err Detect Timeout */
+};
+
+/*
+ * Special request flags
+ */
+#define FCPIO_ICMND_SRFLAG_RETRY 0x01   /* Enable Retry handling on exchange */
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define FCPIO_ICMND_PTA_SIMPLE      0   /* simple task attribute */
+#define FCPIO_ICMND_PTA_HEADQ       1   /* head of queue task attribute */
+#define FCPIO_ICMND_PTA_ORDERED     2   /* ordered task attribute */
+#define FCPIO_ICMND_PTA_ACA         4   /* auto contingent allegiance */
+#define FCPIO_ICMND_PRI_SHIFT       3   /* priority field starts in bit 3 */
+
+/*
+ * Command flags
+ */
+#define FCPIO_ICMND_RDDATA      0x02    /* read data */
+#define FCPIO_ICMND_WRDATA      0x01    /* write data */
+
+/*
+ * fcpio_icmnd_32: host -> firmware request
+ *
+ * used for sending out an initiator SCSI 32-byte command
+ */
+struct fcpio_icmnd_32 {
+	u32   lunmap_id;              /* index into lunmap table */
+	u8    special_req_flags;      /* special exchange request flags */
+	u8    _resvd0[3];             /* reserved */
+	u32   sgl_cnt;                /* scatter-gather list count */
+	u32   sense_len;              /* sense buffer length */
+	u64   sgl_addr;               /* scatter-gather list addr */
+	u64   sense_addr;             /* sense buffer address */
+	u8    crn;                    /* SCSI Command Reference No. */
+	u8    pri_ta;                 /* SCSI Priority and Task attribute */
+	u8    _resvd1;                /* reserved: should be 0 */
+	u8    flags;                  /* command flags */
+	u8    scsi_cdb[CDB_32];       /* SCSI Cmnd Descriptor Block */
+	u32   data_len;               /* length of data expected */
+	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
+	u8    _resvd2;                /* reserved */
+	u8    d_id[3];		      /* FC vNIC only: Target D_ID */
+	u16   mss;                    /* FC vNIC only: max burst */
+	u16   _resvd3;                /* reserved */
+	u32   r_a_tov;                /* FC vNIC only: Res. Alloc Timeout */
+	u32   e_d_tov;                /* FC vNIC only: Error Detect Timeout */
+};
+
+/*
+ * fcpio_itmf: host -> firmware request
+ *
+ * used for requesting the firmware to abort a request and/or send out
+ * a task management function
+ *
+ * The t_tag field is only needed when the request type is ABT_TASK.
+ */
+struct fcpio_itmf {
+	u32   lunmap_id;              /* index into lunmap table */
+	u32   tm_req;                 /* SCSI Task Management request */
+	u32   t_tag;                  /* header tag of fcpio to be aborted */
+	u32   _resvd;                 /* _reserved */
+	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
+	u8    _resvd1;                /* reserved */
+	u8    d_id[3];		      /* FC vNIC only: Target D_ID */
+	u32   r_a_tov;                /* FC vNIC only: R_A_TOV in msec */
+	u32   e_d_tov;                /* FC vNIC only: E_D_TOV in msec */
+};
+
+/*
+ * Task Management request
+ */
+enum fcpio_itmf_tm_req_type {
+	FCPIO_ITMF_ABT_TASK_TERM = 0x01,    /* abort task and terminate */
+	FCPIO_ITMF_ABT_TASK,                /* abort task and issue abts */
+	FCPIO_ITMF_ABT_TASK_SET,            /* abort task set */
+	FCPIO_ITMF_CLR_TASK_SET,            /* clear task set */
+	FCPIO_ITMF_LUN_RESET,               /* logical unit reset task mgmt */
+	FCPIO_ITMF_CLR_ACA,                 /* Clear ACA condition */
+};
+
+/*
+ * fcpio_tdata: host -> firmware request
+ *
+ * used for requesting the firmware to send out a read data transfer for a
+ * target command
+ */
+struct fcpio_tdata {
+	u16   rx_id;                  /* FC rx_id of target command */
+	u16   flags;                  /* command flags */
+	u32   rel_offset;             /* data sequence relative offset */
+	u32   sgl_cnt;                /* scatter-gather list count */
+	u32   data_len;               /* length of data expected to send */
+	u64   sgl_addr;               /* scatter-gather list address */
+};
+
+/*
+ * Command flags
+ */
+#define FCPIO_TDATA_SCSI_RSP    0x01    /* send a scsi resp. after last frame */
+
+/*
+ * fcpio_txrdy: host -> firmware request
+ *
+ * used for requesting the firmware to send out a write data transfer for a
+ * target command
+ */
+struct fcpio_txrdy {
+	u16   rx_id;                  /* FC rx_id of target command */
+	u16   _resvd0;                /* reserved */
+	u32   rel_offset;             /* data sequence relative offset */
+	u32   sgl_cnt;                /* scatter-gather list count */
+	u32   data_len;               /* length of data expected to send */
+	u64   sgl_addr;               /* scatter-gather list address */
+};
+
+/*
+ * fcpio_trsp: host -> firmware request
+ *
+ * used for requesting the firmware to send out a response for a target
+ * command
+ */
+struct fcpio_trsp {
+	u16   rx_id;                  /* FC rx_id of target command */
+	u16   _resvd0;                /* reserved */
+	u32   sense_len;              /* sense data buffer length */
+	u64   sense_addr;             /* sense data buffer address */
+	u16   _resvd1;                /* reserved */
+	u8    flags;                  /* response request flags */
+	u8    scsi_status;            /* SCSI status */
+	u32   residual;               /* SCSI data residual value of I/O */
+};
+
+/*
+ * resposnse request flags
+ */
+#define FCPIO_TRSP_RESID_UNDER  0x08   /* residual is valid and is underflow */
+#define FCPIO_TRSP_RESID_OVER   0x04   /* residual is valid and is overflow */
+
+/*
+ * fcpio_ttmf_ack: host -> firmware response
+ *
+ * used by the host to indicate to the firmware it has received and processed
+ * the target tmf request
+ */
+struct fcpio_ttmf_ack {
+	u16   rx_id;                  /* FC rx_id of target command */
+	u16   _resvd0;                /* reserved */
+	u32   tmf_status;             /* SCSI task management status */
+};
+
+/*
+ * fcpio_tabort: host -> firmware request
+ *
+ * used by the host to request the firmware to abort a target request that was
+ * received by the firmware
+ */
+struct fcpio_tabort {
+	u16   rx_id;                  /* rx_id of the target request */
+};
+
+/*
+ * fcpio_reset: host -> firmware request
+ *
+ * used by the host to signal a reset of the driver to the firmware
+ * and to request firmware to clean up all outstanding I/O
+ */
+struct fcpio_reset {
+	u32   _resvd;
+};
+
+enum fcpio_flogi_reg_format_type {
+	FCPIO_FLOGI_REG_DEF_DEST = 0,    /* Use the oui | s_id mac format */
+	FCPIO_FLOGI_REG_GW_DEST,         /* Use the fixed gateway mac */
+};
+
+/*
+ * fcpio_flogi_reg: host -> firmware request
+ *
+ * fc vnic only
+ * used by the host to notify the firmware of the lif's s_id
+ * and destination mac address format
+ */
+struct fcpio_flogi_reg {
+	u8 format;
+	u8 s_id[3];			/* FC vNIC only: Source S_ID */
+	u8 gateway_mac[ETH_ALEN];	/* Destination gateway mac */
+	u16 _resvd;
+	u32 r_a_tov;			/* R_A_TOV in msec */
+	u32 e_d_tov;			/* E_D_TOV in msec */
+};
+
+/*
+ * fcpio_echo: host -> firmware request
+ *
+ * sends a heartbeat echo request to the firmware
+ */
+struct fcpio_echo {
+	u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_req: host -> firmware request
+ *
+ * scsi vnic only
+ * sends a request to retrieve the lunmap table for scsi vnics
+ */
+struct fcpio_lunmap_req {
+	u64 addr;                     /* address of the buffer */
+	u32 len;                      /* len of the buffer */
+};
+
+/*
+ * fcpio_flogi_fip_reg: host -> firmware request
+ *
+ * fc vnic only
+ * used by the host to notify the firmware of the lif's s_id
+ * and destination mac address format
+ */
+struct fcpio_flogi_fip_reg {
+	u8    _resvd0;
+	u8     s_id[3];               /* FC vNIC only: Source S_ID */
+	u8     fcf_mac[ETH_ALEN];     /* FCF Target destination mac */
+	u16   _resvd1;
+	u32   r_a_tov;                /* R_A_TOV in msec */
+	u32   e_d_tov;                /* E_D_TOV in msec */
+	u8    ha_mac[ETH_ALEN];       /* Host adapter source mac */
+	u16   _resvd2;
+};
+
+/*
+ * Basic structure for all fcpio structures that are sent from the host to the
+ * firmware.  They are 128 bytes per structure.
+ */
+#define FCPIO_HOST_REQ_LEN      128     /* expected length of host requests */
+
+struct fcpio_host_req {
+	struct fcpio_header hdr;
+
+	union {
+		/*
+		 * Defines space needed for request
+		 */
+		u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)];
+
+		/*
+		 * Initiator host requests
+		 */
+		struct fcpio_icmnd_16               icmnd_16;
+		struct fcpio_icmnd_32               icmnd_32;
+		struct fcpio_itmf                   itmf;
+
+		/*
+		 * Target host requests
+		 */
+		struct fcpio_tdata                  tdata;
+		struct fcpio_txrdy                  txrdy;
+		struct fcpio_trsp                   trsp;
+		struct fcpio_ttmf_ack               ttmf_ack;
+		struct fcpio_tabort                 tabort;
+
+		/*
+		 * Misc requests
+		 */
+		struct fcpio_reset                  reset;
+		struct fcpio_flogi_reg              flogi_reg;
+		struct fcpio_echo                   echo;
+		struct fcpio_lunmap_req             lunmap_req;
+		struct fcpio_flogi_fip_reg          flogi_fip_reg;
+	} u;
+};
+
+/*
+ * fcpio_icmnd_cmpl: firmware -> host response
+ *
+ * used for sending the host a response to an initiator command
+ */
+struct fcpio_icmnd_cmpl {
+	u8    _resvd0[6];             /* reserved */
+	u8    flags;                  /* response flags */
+	u8    scsi_status;            /* SCSI status */
+	u32   residual;               /* SCSI data residual length */
+	u32   sense_len;              /* SCSI sense length */
+};
+
+/*
+ * response flags
+ */
+#define FCPIO_ICMND_CMPL_RESID_UNDER    0x08    /* resid under and valid */
+#define FCPIO_ICMND_CMPL_RESID_OVER     0x04    /* resid over and valid */
+
+/*
+ * fcpio_itmf_cmpl: firmware -> host response
+ *
+ * used for sending the host a response for a itmf request
+ */
+struct fcpio_itmf_cmpl {
+	u32    _resvd;                /* reserved */
+};
+
+/*
+ * fcpio_tcmnd_16: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming target SCSI 16-Byte
+ * request
+ */
+struct fcpio_tcmnd_16 {
+	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
+	u8    crn;                    /* SCSI Command Reference No. */
+	u8    pri_ta;                 /* SCSI Priority and Task attribute */
+	u8    _resvd2;                /* reserved: should be 0 */
+	u8    flags;                  /* command flags */
+	u8    scsi_cdb[CDB_16];       /* SCSI Cmnd Descriptor Block */
+	u32   data_len;               /* length of data expected */
+	u8    _resvd1;                /* reserved */
+	u8    s_id[3];		      /* FC vNIC only: Source S_ID */
+};
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define FCPIO_TCMND_PTA_SIMPLE      0   /* simple task attribute */
+#define FCPIO_TCMND_PTA_HEADQ       1   /* head of queue task attribute */
+#define FCPIO_TCMND_PTA_ORDERED     2   /* ordered task attribute */
+#define FCPIO_TCMND_PTA_ACA         4   /* auto contingent allegiance */
+#define FCPIO_TCMND_PRI_SHIFT       3   /* priority field starts in bit 3 */
+
+/*
+ * Command flags
+ */
+#define FCPIO_TCMND_RDDATA      0x02    /* read data */
+#define FCPIO_TCMND_WRDATA      0x01    /* write data */
+
+/*
+ * fcpio_tcmnd_32: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming target SCSI 32-Byte
+ * request
+ */
+struct fcpio_tcmnd_32 {
+	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
+	u8    crn;                    /* SCSI Command Reference No. */
+	u8    pri_ta;                 /* SCSI Priority and Task attribute */
+	u8    _resvd2;                /* reserved: should be 0 */
+	u8    flags;                  /* command flags */
+	u8    scsi_cdb[CDB_32];       /* SCSI Cmnd Descriptor Block */
+	u32   data_len;               /* length of data expected */
+	u8    _resvd0;                /* reserved */
+	u8    s_id[3];		      /* FC vNIC only: Source S_ID */
+};
+
+/*
+ * fcpio_tdrsp_cmpl: firmware -> host response
+ *
+ * used by the firmware to notify the host of a response to a host target
+ * command
+ */
+struct fcpio_tdrsp_cmpl {
+	u16   rx_id;                  /* rx_id of the target request */
+	u16   _resvd0;                /* reserved */
+};
+
+/*
+ * fcpio_ttmf: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming task management
+ * function request
+ */
+struct fcpio_ttmf {
+	u8    _resvd0;                /* reserved */
+	u8    s_id[3];		      /* FC vNIC only: Source S_ID */
+	u8    lun[LUN_ADDRESS];       /* FC vNIC only: LUN address */
+	u8    crn;                    /* SCSI Command Reference No. */
+	u8    _resvd2[3];             /* reserved */
+	u32   tmf_type;               /* task management request type */
+};
+
+/*
+ * Task Management request
+ */
+#define FCPIO_TTMF_CLR_ACA      0x40    /* Clear ACA condition */
+#define FCPIO_TTMF_LUN_RESET    0x10    /* logical unit reset task mgmt */
+#define FCPIO_TTMF_CLR_TASK_SET 0x04    /* clear task set */
+#define FCPIO_TTMF_ABT_TASK_SET 0x02    /* abort task set */
+#define FCPIO_TTMF_ABT_TASK     0x01    /* abort task */
+
+/*
+ * fcpio_tabort_cmpl: firmware -> host response
+ *
+ * used by the firmware to respond to a host's tabort request
+ */
+struct fcpio_tabort_cmpl {
+	u16   rx_id;                  /* rx_id of the target request */
+	u16   _resvd0;                /* reserved */
+};
+
+/*
+ * fcpio_ack: firmware -> host response
+ *
+ * used by firmware to notify the host of the last work request received
+ */
+struct fcpio_ack {
+	u16  request_out;             /* last host entry received */
+	u16  _resvd;
+};
+
+/*
+ * fcpio_reset_cmpl: firmware -> host response
+ *
+ * use by firmware to respond to the host's reset request
+ */
+struct fcpio_reset_cmpl {
+	u16   vnic_id;
+};
+
+/*
+ * fcpio_flogi_reg_cmpl: firmware -> host response
+ *
+ * fc vnic only
+ * response to the fcpio_flogi_reg request
+ */
+struct fcpio_flogi_reg_cmpl {
+	u32 _resvd;
+};
+
+/*
+ * fcpio_echo_cmpl: firmware -> host response
+ *
+ * response to the fcpio_echo request
+ */
+struct fcpio_echo_cmpl {
+	u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_chng: firmware -> host notification
+ *
+ * scsi vnic only
+ * notifies the host that the lunmap tables have changed
+ */
+struct fcpio_lunmap_chng {
+	u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_req_cmpl: firmware -> host response
+ *
+ * scsi vnic only
+ * response for lunmap table request from the host
+ */
+struct fcpio_lunmap_req_cmpl {
+	u32 _resvd;
+};
+
+/*
+ * Basic structure for all fcpio structures that are sent from the firmware to
+ * the host.  They are 64 bytes per structure.
+ */
+#define FCPIO_FW_REQ_LEN        64      /* expected length of fw requests */
+struct fcpio_fw_req {
+	struct fcpio_header hdr;
+
+	union {
+		/*
+		 * Defines space needed for request
+		 */
+		u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)];
+
+		/*
+		 * Initiator firmware responses
+		 */
+		struct fcpio_icmnd_cmpl         icmnd_cmpl;
+		struct fcpio_itmf_cmpl          itmf_cmpl;
+
+		/*
+		 * Target firmware new requests
+		 */
+		struct fcpio_tcmnd_16           tcmnd_16;
+		struct fcpio_tcmnd_32           tcmnd_32;
+
+		/*
+		 * Target firmware responses
+		 */
+		struct fcpio_tdrsp_cmpl         tdrsp_cmpl;
+		struct fcpio_ttmf               ttmf;
+		struct fcpio_tabort_cmpl        tabort_cmpl;
+
+		/*
+		 * Firmware response to work received
+		 */
+		struct fcpio_ack                ack;
+
+		/*
+		 * Misc requests
+		 */
+		struct fcpio_reset_cmpl         reset_cmpl;
+		struct fcpio_flogi_reg_cmpl     flogi_reg_cmpl;
+		struct fcpio_echo_cmpl          echo_cmpl;
+		struct fcpio_lunmap_chng        lunmap_chng;
+		struct fcpio_lunmap_req_cmpl    lunmap_req_cmpl;
+	} u;
+};
+
+/*
+ * Access routines to encode and decode the color bit, which is the most
+ * significant bit of the MSB of the structure
+ */
+static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color)
+{
+	u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;
+
+	if (color)
+		*c |= 0x80;
+	else
+		*c &= ~0x80;
+}
+
+static inline void fcpio_color_dec(struct fcpio_fw_req *fw_req, u8 *color)
+{
+	u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;
+
+	*color = *c >> 7;
+
+	/*
+	 * Make sure color bit is read from desc *before* other fields
+	 * are read from desc.  Hardware guarantees color bit is last
+	 * bit (byte) written.  Adding the rmb() prevents the compiler
+	 * and/or CPU from reordering the reads which would potentially
+	 * result in reading stale values.
+	 */
+
+	rmb();
+
+}
+
+/*
+ * Lunmap table entry for scsi vnics
+ */
+#define FCPIO_LUNMAP_TABLE_SIZE     256
+#define FCPIO_FLAGS_LUNMAP_VALID    0x80
+#define FCPIO_FLAGS_BOOT            0x01
+struct fcpio_lunmap_entry {
+	u8    bus;
+	u8    target;
+	u8    lun;
+	u8    path_cnt;
+	u16   flags;
+	u16   update_cnt;
+};
+
+struct fcpio_lunmap_tbl {
+	u32                   update_cnt;
+	struct fcpio_lunmap_entry   lunmaps[FCPIO_LUNMAP_TABLE_SIZE];
+};
+
+#endif /* _FCPIO_H_ */