Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 362 insertions, 0 deletions

diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h
new file mode 100644
index 000000000..7ae074e5d
--- /dev/null
+++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.h
@@ -0,0 +1,362 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*******************************************************************************
+ * IBM Virtual SCSI Target Driver
+ * Copyright (C) 2003-2005 Dave Boutcher (boutcher@us.ibm.com) IBM Corp.
+ *			   Santiago Leon (santil@us.ibm.com) IBM Corp.
+ *			   Linda Xie (lxie@us.ibm.com) IBM Corp.
+ *
+ * Copyright (C) 2005-2011 FUJITA Tomonori <tomof@acm.org>
+ * Copyright (C) 2010 Nicholas A. Bellinger <nab@kernel.org>
+ * Copyright (C) 2016 Bryant G. Ly <bryantly@linux.vnet.ibm.com> IBM Corp.
+ *
+ * Authors: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
+ * Authors: Michael Cyr <mikecyr@linux.vnet.ibm.com>
+ *
+ ****************************************************************************/
+
+#ifndef __H_IBMVSCSI_TGT
+#define __H_IBMVSCSI_TGT
+
+#include <linux/interrupt.h>
+#include "libsrp.h"
+
+#define SYS_ID_NAME_LEN		64
+#define PARTITION_NAMELEN	96
+#define IBMVSCSIS_NAMELEN       32
+
+#define MSG_HI  0
+#define MSG_LOW 1
+
+#define MAX_CMD_Q_PAGES       4
+#define CRQ_PER_PAGE          (PAGE_SIZE / sizeof(struct viosrp_crq))
+/* in terms of number of elements */
+#define DEFAULT_CMD_Q_SIZE    CRQ_PER_PAGE
+#define MAX_CMD_Q_SIZE        (DEFAULT_CMD_Q_SIZE * MAX_CMD_Q_PAGES)
+
+#define SRP_VIOLATION           0x102  /* general error code */
+
+/*
+ * SRP buffer formats defined as of 16.a supported by this driver.
+ */
+#define SUPPORTED_FORMATS  ((SRP_DATA_DESC_DIRECT << 1) | \
+			    (SRP_DATA_DESC_INDIRECT << 1))
+
+#define SCSI_LUN_ADDR_METHOD_FLAT	1
+
+struct dma_window {
+	u32 liobn;	/* Unique per vdevice */
+	u64 tce_base;	/* Physical location of the TCE table */
+	u64 tce_size;	/* Size of the TCE table in bytes */
+};
+
+struct target_dds {
+	u64 unit_id;                /* 64 bit will force alignment */
+#define NUM_DMA_WINDOWS 2
+#define LOCAL  0
+#define REMOTE 1
+	struct dma_window  window[NUM_DMA_WINDOWS];
+
+	/* root node property "ibm,partition-no" */
+	uint partition_num;
+	char partition_name[PARTITION_NAMELEN];
+};
+
+#define MAX_NUM_PORTS        1
+#define MAX_H_COPY_RDMA      (128 * 1024)
+
+#define MAX_EYE   64
+
+/* Return codes */
+#define ADAPT_SUCCESS            0L
+/* choose error codes that do not conflict with PHYP */
+#define ERROR                   -40L
+
+struct format_code {
+	u8 reserved;
+	u8 buffers;
+};
+
+struct client_info {
+#define SRP_VERSION "16.a"
+	char srp_version[8];
+	/* root node property ibm,partition-name */
+	char partition_name[PARTITION_NAMELEN];
+	/* root node property ibm,partition-no */
+	u32 partition_number;
+	/* initially 1 */
+	u32 mad_version;
+	u32 os_type;
+};
+
+/*
+ * Changing this constant changes the number of seconds to wait before
+ * considering the client will never service its queue again.
+ */
+#define SECONDS_TO_CONSIDER_FAILED 30
+/*
+ * These constants set the polling period used to determine if the client
+ * has freed at least one element in the response queue.
+ */
+#define WAIT_SECONDS 1
+#define WAIT_NANO_SECONDS 5000
+#define MAX_TIMER_POPS ((1000000 / WAIT_NANO_SECONDS) * \
+			SECONDS_TO_CONSIDER_FAILED)
+/*
+ * general purpose timer control block
+ * which can be used for multiple functions
+ */
+struct timer_cb {
+	struct hrtimer timer;
+	/*
+	 * how long has it been since the client
+	 * serviced the queue. The variable is incrmented
+	 * in the service_wait_q routine and cleared
+	 * in send messages
+	 */
+	int timer_pops;
+	/* the timer is started */
+	bool started;
+};
+
+struct cmd_queue {
+	/* kva */
+	struct viosrp_crq *base_addr;
+	dma_addr_t crq_token;
+	/* used to maintain index */
+	uint mask;
+	/* current element */
+	uint index;
+	int size;
+};
+
+#define SCSOLNT_RESP_SHIFT	1
+#define UCSOLNT_RESP_SHIFT	2
+
+#define SCSOLNT         BIT(SCSOLNT_RESP_SHIFT)
+#define UCSOLNT         BIT(UCSOLNT_RESP_SHIFT)
+
+enum cmd_type {
+	SCSI_CDB	= 0x01,
+	TASK_MANAGEMENT	= 0x02,
+	/* MAD or addressed to port 0 */
+	ADAPTER_MAD	= 0x04,
+	UNSET_TYPE	= 0x08,
+};
+
+struct iu_rsp {
+	u8 format;
+	u8 sol_not;
+	u16 len;
+	/* tag is just to help client identify cmd, so don't translate be/le */
+	u64 tag;
+};
+
+struct ibmvscsis_cmd {
+	struct list_head list;
+	/* Used for TCM Core operations */
+	struct se_cmd se_cmd;
+	struct iu_entry *iue;
+	struct iu_rsp rsp;
+	struct work_struct work;
+	struct scsi_info *adapter;
+	struct ibmvscsis_cmd *abort_cmd;
+	/* Sense buffer that will be mapped into outgoing status */
+	unsigned char sense_buf[TRANSPORT_SENSE_BUFFER];
+	u64 init_time;
+#define CMD_FAST_FAIL	BIT(0)
+#define DELAY_SEND	BIT(1)
+	u32 flags;
+	char type;
+};
+
+struct ibmvscsis_nexus {
+	struct se_session *se_sess;
+};
+
+struct ibmvscsis_tport {
+	/* SCSI protocol the tport is providing */
+	u8 tport_proto_id;
+	/* ASCII formatted WWPN for SRP Target port */
+	char tport_name[IBMVSCSIS_NAMELEN];
+	/* Returned by ibmvscsis_make_tport() */
+	struct se_wwn tport_wwn;
+	/* Returned by ibmvscsis_make_tpg() */
+	struct se_portal_group se_tpg;
+	/* ibmvscsis port target portal group tag for TCM */
+	u16 tport_tpgt;
+	/* Pointer to TCM session for I_T Nexus */
+	struct ibmvscsis_nexus *ibmv_nexus;
+	bool enabled;
+	bool releasing;
+};
+
+struct scsi_info {
+	struct list_head list;
+	char eye[MAX_EYE];
+
+	/* commands waiting for space on repsonse queue */
+	struct list_head waiting_rsp;
+#define NO_QUEUE                    0x00
+#define WAIT_ENABLED                0X01
+#define WAIT_CONNECTION             0x04
+	/* have established a connection */
+#define CONNECTED                   0x08
+	/* at least one port is processing SRP IU */
+#define SRP_PROCESSING              0x10
+	/* remove request received */
+#define UNCONFIGURING               0x20
+	/* disconnect by letting adapter go idle, no error */
+#define WAIT_IDLE                   0x40
+	/* disconnecting to clear an error */
+#define ERR_DISCONNECT              0x80
+	/* disconnect to clear error state, then come back up */
+#define ERR_DISCONNECT_RECONNECT    0x100
+	/* disconnected after clearing an error */
+#define ERR_DISCONNECTED            0x200
+	/* A series of errors caused unexpected errors */
+#define UNDEFINED                   0x400
+	u16  state;
+	int fast_fail;
+	struct target_dds dds;
+	char *cmd_pool;
+	/* list of free commands */
+	struct list_head free_cmd;
+	/* command elements ready for scheduler */
+	struct list_head schedule_q;
+	/* commands sent to TCM */
+	struct list_head active_q;
+	caddr_t *map_buf;
+	/* ioba of map buffer */
+	dma_addr_t map_ioba;
+	/* allowable number of outstanding SRP requests */
+	int request_limit;
+	/* extra credit */
+	int credit;
+	/* outstanding transactions against credit limit */
+	int debit;
+
+	/* allow only one outstanding mad request */
+#define PROCESSING_MAD                0x00002
+	/* Waiting to go idle */
+#define WAIT_FOR_IDLE		      0x00004
+	/* H_REG_CRQ called */
+#define CRQ_CLOSED                    0x00010
+	/* detected that client has failed */
+#define CLIENT_FAILED                 0x00040
+	/* detected that transport event occurred */
+#define TRANS_EVENT                   0x00080
+	/* don't attempt to send anything to the client */
+#define RESPONSE_Q_DOWN               0x00100
+	/* request made to schedule disconnect handler */
+#define SCHEDULE_DISCONNECT           0x00400
+	/* disconnect handler is scheduled */
+#define DISCONNECT_SCHEDULED          0x00800
+	/* remove function is sleeping */
+#define CFG_SLEEPING                  0x01000
+	/* Register for Prepare for Suspend Transport Events */
+#define PREP_FOR_SUSPEND_ENABLED      0x02000
+	/* Prepare for Suspend event sent */
+#define PREP_FOR_SUSPEND_PENDING      0x04000
+	/* Resume from Suspend event sent */
+#define PREP_FOR_SUSPEND_ABORTED      0x08000
+	/* Prepare for Suspend event overwrote another CRQ entry */
+#define PREP_FOR_SUSPEND_OVERWRITE    0x10000
+	u32 flags;
+	/* adapter lock */
+	spinlock_t intr_lock;
+	/* information needed to manage command queue */
+	struct cmd_queue cmd_q;
+	/* used in hcall to copy response back into srp buffer */
+	u64  empty_iu_id;
+	/* used in crq, to tag what iu the response is for */
+	u64  empty_iu_tag;
+	uint new_state;
+	uint resume_state;
+	/* control block for the response queue timer */
+	struct timer_cb rsp_q_timer;
+	/* keep last client to enable proper accounting */
+	struct client_info client_data;
+	/* what can this client do */
+	u32 client_cap;
+	/*
+	 * The following two fields capture state and flag changes that
+	 * can occur when the lock is given up.  In the orginal design,
+	 * the lock was held during calls into phyp;
+	 * however, phyp did not meet PAPR architecture.  This is
+	 * a work around.
+	 */
+	u16  phyp_acr_state;
+	u32 phyp_acr_flags;
+
+	struct workqueue_struct *work_q;
+	struct completion wait_idle;
+	struct completion unconfig;
+	struct device dev;
+	struct vio_dev *dma_dev;
+	struct srp_target target;
+	struct ibmvscsis_tport tport;
+	struct tasklet_struct work_task;
+	struct work_struct proc_work;
+};
+
+/*
+ * Provide a constant that allows software to detect the adapter is
+ * disconnecting from the client from one of several states.
+ */
+#define IS_DISCONNECTING (UNCONFIGURING | ERR_DISCONNECT_RECONNECT | \
+			  ERR_DISCONNECT)
+
+/*
+ * Provide a constant that can be used with interrupt handling that
+ * essentially lets the interrupt handler know that all requests should
+ * be thrown out,
+ */
+#define DONT_PROCESS_STATE (IS_DISCONNECTING | UNDEFINED | \
+			    ERR_DISCONNECTED  | WAIT_IDLE)
+
+/*
+ * If any of these flag bits are set then do not allow the interrupt
+ * handler to schedule the off level handler.
+ */
+#define BLOCK (DISCONNECT_SCHEDULED)
+
+/* State and transition events that stop the interrupt handler */
+#define TARGET_STOP(VSCSI) (long)(((VSCSI)->state & DONT_PROCESS_STATE) | \
+				  ((VSCSI)->flags & BLOCK))
+
+#define PREP_FOR_SUSPEND_FLAGS  (PREP_FOR_SUSPEND_ENABLED | \
+				 PREP_FOR_SUSPEND_PENDING | \
+				 PREP_FOR_SUSPEND_ABORTED | \
+				 PREP_FOR_SUSPEND_OVERWRITE)
+
+/* flag bit that are not reset during disconnect */
+#define PRESERVE_FLAG_FIELDS (PREP_FOR_SUSPEND_FLAGS)
+
+#define vio_iu(IUE) ((union viosrp_iu *)((IUE)->sbuf->buf))
+
+#define READ_CMD(cdb)	(((cdb)[0] & 0x1F) == 8)
+#define WRITE_CMD(cdb)	(((cdb)[0] & 0x1F) == 0xA)
+
+#ifndef H_GET_PARTNER_INFO
+#define H_GET_PARTNER_INFO              0x0000000000000008LL
+#endif
+#ifndef H_ENABLE_PREPARE_FOR_SUSPEND
+#define H_ENABLE_PREPARE_FOR_SUSPEND    0x000000000000001DLL
+#endif
+#ifndef H_READY_FOR_SUSPEND
+#define H_READY_FOR_SUSPEND             0x000000000000001ELL
+#endif
+
+
+#define h_copy_rdma(l, sa, sb, da, db) \
+		plpar_hcall_norets(H_COPY_RDMA, l, sa, sb, da, db)
+#define h_vioctl(u, o, a, u1, u2, u3, u4) \
+		plpar_hcall_norets(H_VIOCTL, u, o, a, u1, u2)
+#define h_reg_crq(ua, tok, sz) \
+		plpar_hcall_norets(H_REG_CRQ, ua, tok, sz)
+#define h_free_crq(ua) \
+		plpar_hcall_norets(H_FREE_CRQ, ua)
+#define h_send_crq(ua, d1, d2) \
+		plpar_hcall_norets(H_SEND_CRQ, ua, d1, d2)
+
+#endif