Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 451 insertions, 0 deletions

diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
new file mode 100644
index 000000000..8f6ffb402
--- /dev/null
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h
@@ -0,0 +1,451 @@
+/*
+ * Management Module Support for MPT (Message Passing Technology) based
+ * controllers
+ *
+ * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.h
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2014 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA.
+ */
+
+#ifndef MPT3SAS_CTL_H_INCLUDED
+#define MPT3SAS_CTL_H_INCLUDED
+
+#ifdef __KERNEL__
+#include <linux/miscdevice.h>
+#endif
+
+#include "mpt3sas_base.h"
+
+#ifndef MPT2SAS_MINOR
+#define MPT2SAS_MINOR		(MPT_MINOR + 1)
+#endif
+#ifndef MPT3SAS_MINOR
+#define MPT3SAS_MINOR		(MPT_MINOR + 2)
+#endif
+#define MPT2SAS_DEV_NAME	"mpt2ctl"
+#define MPT3SAS_DEV_NAME	"mpt3ctl"
+#define MPT3_MAGIC_NUMBER	'L'
+#define MPT3_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
+
+/**
+ * IOCTL opcodes
+ */
+#define MPT3IOCINFO	_IOWR(MPT3_MAGIC_NUMBER, 17, \
+	struct mpt3_ioctl_iocinfo)
+#define MPT3COMMAND	_IOWR(MPT3_MAGIC_NUMBER, 20, \
+	struct mpt3_ioctl_command)
+#ifdef CONFIG_COMPAT
+#define MPT3COMMAND32	_IOWR(MPT3_MAGIC_NUMBER, 20, \
+	struct mpt3_ioctl_command32)
+#endif
+#define MPT3EVENTQUERY	_IOWR(MPT3_MAGIC_NUMBER, 21, \
+	struct mpt3_ioctl_eventquery)
+#define MPT3EVENTENABLE	_IOWR(MPT3_MAGIC_NUMBER, 22, \
+	struct mpt3_ioctl_eventenable)
+#define MPT3EVENTREPORT	_IOWR(MPT3_MAGIC_NUMBER, 23, \
+	struct mpt3_ioctl_eventreport)
+#define MPT3HARDRESET	_IOWR(MPT3_MAGIC_NUMBER, 24, \
+	struct mpt3_ioctl_diag_reset)
+#define MPT3BTDHMAPPING	_IOWR(MPT3_MAGIC_NUMBER, 31, \
+	struct mpt3_ioctl_btdh_mapping)
+
+/* diag buffer support */
+#define MPT3DIAGREGISTER _IOWR(MPT3_MAGIC_NUMBER, 26, \
+	struct mpt3_diag_register)
+#define MPT3DIAGRELEASE	_IOWR(MPT3_MAGIC_NUMBER, 27, \
+	struct mpt3_diag_release)
+#define MPT3DIAGUNREGISTER _IOWR(MPT3_MAGIC_NUMBER, 28, \
+	struct mpt3_diag_unregister)
+#define MPT3DIAGQUERY	_IOWR(MPT3_MAGIC_NUMBER, 29, \
+	struct mpt3_diag_query)
+#define MPT3DIAGREADBUFFER _IOWR(MPT3_MAGIC_NUMBER, 30, \
+	struct mpt3_diag_read_buffer)
+#define MPT3ADDNLDIAGQUERY _IOWR(MPT3_MAGIC_NUMBER, 32, \
+	struct mpt3_addnl_diag_query)
+
+/* Trace Buffer default UniqueId */
+#define MPT2DIAGBUFFUNIQUEID (0x07075900)
+#define MPT3DIAGBUFFUNIQUEID (0x4252434D)
+
+/* UID not found */
+#define MPT3_DIAG_UID_NOT_FOUND (0xFF)
+
+
+/**
+ * struct mpt3_ioctl_header - main header structure
+ * @ioc_number -  IOC unit number
+ * @port_number - IOC port number
+ * @max_data_size - maximum number bytes to transfer on read
+ */
+struct mpt3_ioctl_header {
+	uint32_t ioc_number;
+	uint32_t port_number;
+	uint32_t max_data_size;
+};
+
+/**
+ * struct mpt3_ioctl_diag_reset - diagnostic reset
+ * @hdr - generic header
+ */
+struct mpt3_ioctl_diag_reset {
+	struct mpt3_ioctl_header hdr;
+};
+
+
+/**
+ * struct mpt3_ioctl_pci_info - pci device info
+ * @device - pci device id
+ * @function - pci function id
+ * @bus - pci bus id
+ * @segment_id - pci segment id
+ */
+struct mpt3_ioctl_pci_info {
+	union {
+		struct {
+			uint32_t device:5;
+			uint32_t function:3;
+			uint32_t bus:24;
+		} bits;
+		uint32_t  word;
+	} u;
+	uint32_t segment_id;
+};
+
+
+#define MPT2_IOCTL_INTERFACE_SCSI	(0x00)
+#define MPT2_IOCTL_INTERFACE_FC		(0x01)
+#define MPT2_IOCTL_INTERFACE_FC_IP	(0x02)
+#define MPT2_IOCTL_INTERFACE_SAS	(0x03)
+#define MPT2_IOCTL_INTERFACE_SAS2	(0x04)
+#define MPT2_IOCTL_INTERFACE_SAS2_SSS6200	(0x05)
+#define MPT3_IOCTL_INTERFACE_SAS3	(0x06)
+#define MPT3_IOCTL_INTERFACE_SAS35	(0x07)
+#define MPT2_IOCTL_VERSION_LENGTH	(32)
+
+/**
+ * struct mpt3_ioctl_iocinfo - generic controller info
+ * @hdr - generic header
+ * @adapter_type - type of adapter (spi, fc, sas)
+ * @port_number - port number
+ * @pci_id - PCI Id
+ * @hw_rev - hardware revision
+ * @sub_system_device - PCI subsystem Device ID
+ * @sub_system_vendor - PCI subsystem Vendor ID
+ * @rsvd0 - reserved
+ * @firmware_version - firmware version
+ * @bios_version - BIOS version
+ * @driver_version - driver version - 32 ASCII characters
+ * @rsvd1 - reserved
+ * @scsi_id - scsi id of adapter 0
+ * @rsvd2 - reserved
+ * @pci_information - pci info (2nd revision)
+ */
+struct mpt3_ioctl_iocinfo {
+	struct mpt3_ioctl_header hdr;
+	uint32_t adapter_type;
+	uint32_t port_number;
+	uint32_t pci_id;
+	uint32_t hw_rev;
+	uint32_t subsystem_device;
+	uint32_t subsystem_vendor;
+	uint32_t rsvd0;
+	uint32_t firmware_version;
+	uint32_t bios_version;
+	uint8_t driver_version[MPT2_IOCTL_VERSION_LENGTH];
+	uint8_t rsvd1;
+	uint8_t scsi_id;
+	uint16_t rsvd2;
+	struct mpt3_ioctl_pci_info pci_information;
+};
+
+
+/* number of event log entries */
+#define MPT3SAS_CTL_EVENT_LOG_SIZE (200)
+
+/**
+ * struct mpt3_ioctl_eventquery - query event count and type
+ * @hdr - generic header
+ * @event_entries - number of events returned by get_event_report
+ * @rsvd - reserved
+ * @event_types - type of events currently being captured
+ */
+struct mpt3_ioctl_eventquery {
+	struct mpt3_ioctl_header hdr;
+	uint16_t event_entries;
+	uint16_t rsvd;
+	uint32_t event_types[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
+};
+
+/**
+ * struct mpt3_ioctl_eventenable - enable/disable event capturing
+ * @hdr - generic header
+ * @event_types - toggle off/on type of events to be captured
+ */
+struct mpt3_ioctl_eventenable {
+	struct mpt3_ioctl_header hdr;
+	uint32_t event_types[4];
+};
+
+#define MPT3_EVENT_DATA_SIZE (192)
+/**
+ * struct MPT3_IOCTL_EVENTS -
+ * @event - the event that was reported
+ * @context - unique value for each event assigned by driver
+ * @data - event data returned in fw reply message
+ */
+struct MPT3_IOCTL_EVENTS {
+	uint32_t event;
+	uint32_t context;
+	uint8_t data[MPT3_EVENT_DATA_SIZE];
+};
+
+/**
+ * struct mpt3_ioctl_eventreport - returing event log
+ * @hdr - generic header
+ * @event_data - (see struct MPT3_IOCTL_EVENTS)
+ */
+struct mpt3_ioctl_eventreport {
+	struct mpt3_ioctl_header hdr;
+	struct MPT3_IOCTL_EVENTS event_data[1];
+};
+
+/**
+ * struct mpt3_ioctl_command - generic mpt firmware passthru ioctl
+ * @hdr - generic header
+ * @timeout - command timeout in seconds. (if zero then use driver default
+ *  value).
+ * @reply_frame_buf_ptr - reply location
+ * @data_in_buf_ptr - destination for read
+ * @data_out_buf_ptr - data source for write
+ * @sense_data_ptr - sense data location
+ * @max_reply_bytes - maximum number of reply bytes to be sent to app.
+ * @data_in_size - number bytes for data transfer in (read)
+ * @data_out_size - number bytes for data transfer out (write)
+ * @max_sense_bytes - maximum number of bytes for auto sense buffers
+ * @data_sge_offset - offset in words from the start of the request message to
+ * the first SGL
+ * @mf[1];
+ */
+struct mpt3_ioctl_command {
+	struct mpt3_ioctl_header hdr;
+	uint32_t timeout;
+	void __user *reply_frame_buf_ptr;
+	void __user *data_in_buf_ptr;
+	void __user *data_out_buf_ptr;
+	void __user *sense_data_ptr;
+	uint32_t max_reply_bytes;
+	uint32_t data_in_size;
+	uint32_t data_out_size;
+	uint32_t max_sense_bytes;
+	uint32_t data_sge_offset;
+	uint8_t mf[1];
+};
+
+#ifdef CONFIG_COMPAT
+struct mpt3_ioctl_command32 {
+	struct mpt3_ioctl_header hdr;
+	uint32_t timeout;
+	uint32_t reply_frame_buf_ptr;
+	uint32_t data_in_buf_ptr;
+	uint32_t data_out_buf_ptr;
+	uint32_t sense_data_ptr;
+	uint32_t max_reply_bytes;
+	uint32_t data_in_size;
+	uint32_t data_out_size;
+	uint32_t max_sense_bytes;
+	uint32_t data_sge_offset;
+	uint8_t mf[1];
+};
+#endif
+
+/**
+ * struct mpt3_ioctl_btdh_mapping - mapping info
+ * @hdr - generic header
+ * @id - target device identification number
+ * @bus - SCSI bus number that the target device exists on
+ * @handle - device handle for the target device
+ * @rsvd - reserved
+ *
+ * To obtain a bus/id the application sets
+ * handle to valid handle, and bus/id to 0xFFFF.
+ *
+ * To obtain the device handle the application sets
+ * bus/id valid value, and the handle to 0xFFFF.
+ */
+struct mpt3_ioctl_btdh_mapping {
+	struct mpt3_ioctl_header hdr;
+	uint32_t id;
+	uint32_t bus;
+	uint16_t handle;
+	uint16_t rsvd;
+};
+
+
+
+/* application flags for mpt3_diag_register, mpt3_diag_query */
+#define MPT3_APP_FLAGS_APP_OWNED	(0x0001)
+#define MPT3_APP_FLAGS_BUFFER_VALID	(0x0002)
+#define MPT3_APP_FLAGS_FW_BUFFER_ACCESS	(0x0004)
+#define MPT3_APP_FLAGS_DYNAMIC_BUFFER_ALLOC (0x0008)
+
+/* flags for mpt3_diag_read_buffer */
+#define MPT3_FLAGS_REREGISTER		(0x0001)
+
+#define MPT3_PRODUCT_SPECIFIC_DWORDS		23
+
+/**
+ * struct mpt3_diag_register - application register with driver
+ * @hdr - generic header
+ * @reserved -
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
+ * @application_flags - misc flags
+ * @diagnostic_flags - specifies flags affecting command processing
+ * @product_specific - product specific information
+ * @requested_buffer_size - buffers size in bytes
+ * @unique_id - tag specified by application that is used to signal ownership
+ *  of the buffer.
+ *
+ * This will allow the driver to setup any required buffers that will be
+ * needed by firmware to communicate with the driver.
+ */
+struct mpt3_diag_register {
+	struct mpt3_ioctl_header hdr;
+	uint8_t reserved;
+	uint8_t buffer_type;
+	uint16_t application_flags;
+	uint32_t diagnostic_flags;
+	uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS];
+	uint32_t requested_buffer_size;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_unregister - application unregister with driver
+ * @hdr - generic header
+ * @unique_id - tag uniquely identifies the buffer to be unregistered
+ *
+ * This will allow the driver to cleanup any memory allocated for diag
+ * messages and to free up any resources.
+ */
+struct mpt3_diag_unregister {
+	struct mpt3_ioctl_header hdr;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_query - query relevant info associated with diag buffers
+ * @hdr - generic header
+ * @reserved -
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
+ * @application_flags - misc flags
+ * @diagnostic_flags - specifies flags affecting command processing
+ * @product_specific - product specific information
+ * @total_buffer_size - diag buffer size in bytes
+ * @driver_added_buffer_size - size of extra space appended to end of buffer
+ * @unique_id - unique id associated with this buffer.
+ *
+ * The application will send only buffer_type and unique_id.  Driver will
+ * inspect unique_id first, if valid, fill in all the info.  If unique_id is
+ * 0x00, the driver will return info specified by Buffer Type.
+ */
+struct mpt3_diag_query {
+	struct mpt3_ioctl_header hdr;
+	uint8_t reserved;
+	uint8_t buffer_type;
+	uint16_t application_flags;
+	uint32_t diagnostic_flags;
+	uint32_t product_specific[MPT3_PRODUCT_SPECIFIC_DWORDS];
+	uint32_t total_buffer_size;
+	uint32_t driver_added_buffer_size;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_release -  request to send Diag Release Message to firmware
+ * @hdr - generic header
+ * @unique_id - tag uniquely identifies the buffer to be released
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwriting information in the buffer.
+ */
+struct mpt3_diag_release {
+	struct mpt3_ioctl_header hdr;
+	uint32_t unique_id;
+};
+
+/**
+ * struct mpt3_diag_read_buffer - request for copy of the diag buffer
+ * @hdr - generic header
+ * @status -
+ * @reserved -
+ * @flags - misc flags
+ * @starting_offset - starting offset within drivers buffer where to start
+ *  reading data at into the specified application buffer
+ * @bytes_to_read - number of bytes to copy from the drivers buffer into the
+ *  application buffer starting at starting_offset.
+ * @unique_id - unique id associated with this buffer.
+ * @diagnostic_data - data payload
+ */
+struct mpt3_diag_read_buffer {
+	struct mpt3_ioctl_header hdr;
+	uint8_t status;
+	uint8_t reserved;
+	uint16_t flags;
+	uint32_t starting_offset;
+	uint32_t bytes_to_read;
+	uint32_t unique_id;
+	uint32_t diagnostic_data[1];
+};
+
+/**
+ * struct mpt3_addnl_diag_query - diagnostic buffer release reason
+ * @hdr - generic header
+ * @unique_id - unique id associated with this buffer.
+ * @rel_query - release query.
+ * @reserved2
+ */
+struct mpt3_addnl_diag_query {
+	struct mpt3_ioctl_header hdr;
+	uint32_t unique_id;
+	struct htb_rel_query rel_query;
+	uint32_t reserved2[2];
+};
+
+#endif /* MPT3SAS_CTL_H_INCLUDED */