Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 437 insertions, 0 deletions

diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
new file mode 100644
index 000000000..2b80cab70
--- /dev/null
+++ b/drivers/scsi/ps3rom.c
@@ -0,0 +1,437 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PS3 BD/DVD/CD-ROM Storage Driver
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2007 Sony Corp.
+ */
+
+#include <linux/cdrom.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_eh.h>
+
+#include <asm/lv1call.h>
+#include <asm/ps3stor.h>
+
+
+#define DEVICE_NAME			"ps3rom"
+
+#define BOUNCE_SIZE			(64*1024)
+
+#define PS3ROM_MAX_SECTORS		(BOUNCE_SIZE >> 9)
+
+
+struct ps3rom_private {
+	struct ps3_storage_device *dev;
+	struct scsi_cmnd *curr_cmd;
+};
+
+
+#define LV1_STORAGE_SEND_ATAPI_COMMAND	(1)
+
+struct lv1_atapi_cmnd_block {
+	u8	pkt[32];	/* packet command block           */
+	u32	pktlen;		/* should be 12 for ATAPI 8020    */
+	u32	blocks;
+	u32	block_size;
+	u32	proto;		/* transfer mode                  */
+	u32	in_out;		/* transfer direction             */
+	u64	buffer;		/* parameter except command block */
+	u32	arglen;		/* length above                   */
+};
+
+enum lv1_atapi_proto {
+	NON_DATA_PROTO     = 0,
+	PIO_DATA_IN_PROTO  = 1,
+	PIO_DATA_OUT_PROTO = 2,
+	DMA_PROTO = 3
+};
+
+enum lv1_atapi_in_out {
+	DIR_WRITE = 0,		/* memory -> device */
+	DIR_READ = 1		/* device -> memory */
+};
+
+
+static int ps3rom_slave_configure(struct scsi_device *scsi_dev)
+{
+	struct ps3rom_private *priv = shost_priv(scsi_dev->host);
+	struct ps3_storage_device *dev = priv->dev;
+
+	dev_dbg(&dev->sbd.core, "%s:%u: id %u, lun %llu, channel %u\n", __func__,
+		__LINE__, scsi_dev->id, scsi_dev->lun, scsi_dev->channel);
+
+	/*
+	 * ATAPI SFF8020 devices use MODE_SENSE_10,
+	 * so we can prohibit MODE_SENSE_6
+	 */
+	scsi_dev->use_10_for_ms = 1;
+
+	/* we don't support {READ,WRITE}_6 */
+	scsi_dev->use_10_for_rw = 1;
+
+	return 0;
+}
+
+static int ps3rom_atapi_request(struct ps3_storage_device *dev,
+				struct scsi_cmnd *cmd)
+{
+	struct lv1_atapi_cmnd_block atapi_cmnd;
+	unsigned char opcode = cmd->cmnd[0];
+	int res;
+	u64 lpar;
+
+	dev_dbg(&dev->sbd.core, "%s:%u: send ATAPI command 0x%02x\n", __func__,
+		__LINE__, opcode);
+
+	memset(&atapi_cmnd, 0, sizeof(struct lv1_atapi_cmnd_block));
+	memcpy(&atapi_cmnd.pkt, cmd->cmnd, 12);
+	atapi_cmnd.pktlen = 12;
+	atapi_cmnd.block_size = 1; /* transfer size is block_size * blocks */
+	atapi_cmnd.blocks = atapi_cmnd.arglen = scsi_bufflen(cmd);
+	atapi_cmnd.buffer = dev->bounce_lpar;
+
+	switch (cmd->sc_data_direction) {
+	case DMA_FROM_DEVICE:
+		if (scsi_bufflen(cmd) >= CD_FRAMESIZE)
+			atapi_cmnd.proto = DMA_PROTO;
+		else
+			atapi_cmnd.proto = PIO_DATA_IN_PROTO;
+		atapi_cmnd.in_out = DIR_READ;
+		break;
+
+	case DMA_TO_DEVICE:
+		if (scsi_bufflen(cmd) >= CD_FRAMESIZE)
+			atapi_cmnd.proto = DMA_PROTO;
+		else
+			atapi_cmnd.proto = PIO_DATA_OUT_PROTO;
+		atapi_cmnd.in_out = DIR_WRITE;
+		scsi_sg_copy_to_buffer(cmd, dev->bounce_buf, dev->bounce_size);
+		break;
+
+	default:
+		atapi_cmnd.proto = NON_DATA_PROTO;
+		break;
+	}
+
+	lpar = ps3_mm_phys_to_lpar(__pa(&atapi_cmnd));
+	res = lv1_storage_send_device_command(dev->sbd.dev_id,
+					      LV1_STORAGE_SEND_ATAPI_COMMAND,
+					      lpar, sizeof(atapi_cmnd),
+					      atapi_cmnd.buffer,
+					      atapi_cmnd.arglen, &dev->tag);
+	if (res == LV1_DENIED_BY_POLICY) {
+		dev_dbg(&dev->sbd.core,
+			"%s:%u: ATAPI command 0x%02x denied by policy\n",
+			__func__, __LINE__, opcode);
+		return DID_ERROR << 16;
+	}
+
+	if (res) {
+		dev_err(&dev->sbd.core,
+			"%s:%u: ATAPI command 0x%02x failed %d\n", __func__,
+			__LINE__, opcode, res);
+		return DID_ERROR << 16;
+	}
+
+	return 0;
+}
+
+static inline unsigned int srb10_lba(const struct scsi_cmnd *cmd)
+{
+	return cmd->cmnd[2] << 24 | cmd->cmnd[3] << 16 | cmd->cmnd[4] << 8 |
+	       cmd->cmnd[5];
+}
+
+static inline unsigned int srb10_len(const struct scsi_cmnd *cmd)
+{
+	return cmd->cmnd[7] << 8 | cmd->cmnd[8];
+}
+
+static int ps3rom_read_request(struct ps3_storage_device *dev,
+			       struct scsi_cmnd *cmd, u32 start_sector,
+			       u32 sectors)
+{
+	int res;
+
+	dev_dbg(&dev->sbd.core, "%s:%u: read %u sectors starting at %u\n",
+		__func__, __LINE__, sectors, start_sector);
+
+	res = lv1_storage_read(dev->sbd.dev_id,
+			       dev->regions[dev->region_idx].id, start_sector,
+			       sectors, 0, dev->bounce_lpar, &dev->tag);
+	if (res) {
+		dev_err(&dev->sbd.core, "%s:%u: read failed %d\n", __func__,
+			__LINE__, res);
+		return DID_ERROR << 16;
+	}
+
+	return 0;
+}
+
+static int ps3rom_write_request(struct ps3_storage_device *dev,
+				struct scsi_cmnd *cmd, u32 start_sector,
+				u32 sectors)
+{
+	int res;
+
+	dev_dbg(&dev->sbd.core, "%s:%u: write %u sectors starting at %u\n",
+		__func__, __LINE__, sectors, start_sector);
+
+	scsi_sg_copy_to_buffer(cmd, dev->bounce_buf, dev->bounce_size);
+
+	res = lv1_storage_write(dev->sbd.dev_id,
+				dev->regions[dev->region_idx].id, start_sector,
+				sectors, 0, dev->bounce_lpar, &dev->tag);
+	if (res) {
+		dev_err(&dev->sbd.core, "%s:%u: write failed %d\n", __func__,
+			__LINE__, res);
+		return DID_ERROR << 16;
+	}
+
+	return 0;
+}
+
+static int ps3rom_queuecommand_lck(struct scsi_cmnd *cmd)
+{
+	struct ps3rom_private *priv = shost_priv(cmd->device->host);
+	struct ps3_storage_device *dev = priv->dev;
+	unsigned char opcode;
+	int res;
+
+	priv->curr_cmd = cmd;
+
+	opcode = cmd->cmnd[0];
+	/*
+	 * While we can submit READ/WRITE SCSI commands as ATAPI commands,
+	 * it's recommended for various reasons (performance, error handling,
+	 * ...) to use lv1_storage_{read,write}() instead
+	 */
+	switch (opcode) {
+	case READ_10:
+		res = ps3rom_read_request(dev, cmd, srb10_lba(cmd),
+					  srb10_len(cmd));
+		break;
+
+	case WRITE_10:
+		res = ps3rom_write_request(dev, cmd, srb10_lba(cmd),
+					   srb10_len(cmd));
+		break;
+
+	default:
+		res = ps3rom_atapi_request(dev, cmd);
+		break;
+	}
+
+	if (res) {
+		scsi_build_sense(cmd, 0, ILLEGAL_REQUEST, 0, 0);
+		cmd->result = res;
+		priv->curr_cmd = NULL;
+		scsi_done(cmd);
+	}
+
+	return 0;
+}
+
+static DEF_SCSI_QCMD(ps3rom_queuecommand)
+
+static int decode_lv1_status(u64 status, unsigned char *sense_key,
+			     unsigned char *asc, unsigned char *ascq)
+{
+	if (((status >> 24) & 0xff) != SAM_STAT_CHECK_CONDITION)
+		return -1;
+
+	*sense_key = (status >> 16) & 0xff;
+	*asc       = (status >>  8) & 0xff;
+	*ascq      =  status        & 0xff;
+	return 0;
+}
+
+static irqreturn_t ps3rom_interrupt(int irq, void *data)
+{
+	struct ps3_storage_device *dev = data;
+	struct Scsi_Host *host;
+	struct ps3rom_private *priv;
+	struct scsi_cmnd *cmd;
+	int res;
+	u64 tag, status;
+	unsigned char sense_key, asc, ascq;
+
+	res = lv1_storage_get_async_status(dev->sbd.dev_id, &tag, &status);
+	/*
+	 * status = -1 may mean that ATAPI transport completed OK, but
+	 * ATAPI command itself resulted CHECK CONDITION
+	 * so, upper layer should issue REQUEST_SENSE to check the sense data
+	 */
+
+	if (tag != dev->tag)
+		dev_err(&dev->sbd.core,
+			"%s:%u: tag mismatch, got %llx, expected %llx\n",
+			__func__, __LINE__, tag, dev->tag);
+
+	if (res) {
+		dev_err(&dev->sbd.core, "%s:%u: res=%d status=0x%llx\n",
+			__func__, __LINE__, res, status);
+		return IRQ_HANDLED;
+	}
+
+	host = ps3_system_bus_get_drvdata(&dev->sbd);
+	priv = shost_priv(host);
+	cmd = priv->curr_cmd;
+
+	if (!status) {
+		/* OK, completed */
+		if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
+			int len;
+
+			len = scsi_sg_copy_from_buffer(cmd,
+						       dev->bounce_buf,
+						       dev->bounce_size);
+
+			scsi_set_resid(cmd, scsi_bufflen(cmd) - len);
+		}
+		cmd->result = DID_OK << 16;
+		goto done;
+	}
+
+	if (cmd->cmnd[0] == REQUEST_SENSE) {
+		/* SCSI spec says request sense should never get error */
+		dev_err(&dev->sbd.core, "%s:%u: end error without autosense\n",
+			__func__, __LINE__);
+		cmd->result = DID_ERROR << 16 | SAM_STAT_CHECK_CONDITION;
+		goto done;
+	}
+
+	if (decode_lv1_status(status, &sense_key, &asc, &ascq)) {
+		cmd->result = DID_ERROR << 16;
+		goto done;
+	}
+
+	scsi_build_sense(cmd, 0, sense_key, asc, ascq);
+
+done:
+	priv->curr_cmd = NULL;
+	scsi_done(cmd);
+	return IRQ_HANDLED;
+}
+
+static struct scsi_host_template ps3rom_host_template = {
+	.name =			DEVICE_NAME,
+	.slave_configure =	ps3rom_slave_configure,
+	.queuecommand =		ps3rom_queuecommand,
+	.can_queue =		1,
+	.this_id =		7,
+	.sg_tablesize =		SG_ALL,
+	.emulated =             1,		/* only sg driver uses this */
+	.max_sectors =		PS3ROM_MAX_SECTORS,
+	.module =		THIS_MODULE,
+};
+
+
+static int ps3rom_probe(struct ps3_system_bus_device *_dev)
+{
+	struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
+	int error;
+	struct Scsi_Host *host;
+	struct ps3rom_private *priv;
+
+	if (dev->blk_size != CD_FRAMESIZE) {
+		dev_err(&dev->sbd.core,
+			"%s:%u: cannot handle block size %llu\n", __func__,
+			__LINE__, dev->blk_size);
+		return -EINVAL;
+	}
+
+	dev->bounce_size = BOUNCE_SIZE;
+	dev->bounce_buf = kmalloc(BOUNCE_SIZE, GFP_DMA);
+	if (!dev->bounce_buf)
+		return -ENOMEM;
+
+	error = ps3stor_setup(dev, ps3rom_interrupt);
+	if (error)
+		goto fail_free_bounce;
+
+	host = scsi_host_alloc(&ps3rom_host_template,
+			       sizeof(struct ps3rom_private));
+	if (!host) {
+		dev_err(&dev->sbd.core, "%s:%u: scsi_host_alloc failed\n",
+			__func__, __LINE__);
+		error = -ENOMEM;
+		goto fail_teardown;
+	}
+
+	priv = shost_priv(host);
+	ps3_system_bus_set_drvdata(&dev->sbd, host);
+	priv->dev = dev;
+
+	/* One device/LUN per SCSI bus */
+	host->max_id = 1;
+	host->max_lun = 1;
+
+	error = scsi_add_host(host, &dev->sbd.core);
+	if (error) {
+		dev_err(&dev->sbd.core, "%s:%u: scsi_host_alloc failed %d\n",
+			__func__, __LINE__, error);
+		error = -ENODEV;
+		goto fail_host_put;
+	}
+
+	scsi_scan_host(host);
+	return 0;
+
+fail_host_put:
+	scsi_host_put(host);
+	ps3_system_bus_set_drvdata(&dev->sbd, NULL);
+fail_teardown:
+	ps3stor_teardown(dev);
+fail_free_bounce:
+	kfree(dev->bounce_buf);
+	return error;
+}
+
+static void ps3rom_remove(struct ps3_system_bus_device *_dev)
+{
+	struct ps3_storage_device *dev = to_ps3_storage_device(&_dev->core);
+	struct Scsi_Host *host = ps3_system_bus_get_drvdata(&dev->sbd);
+
+	scsi_remove_host(host);
+	ps3stor_teardown(dev);
+	scsi_host_put(host);
+	ps3_system_bus_set_drvdata(&dev->sbd, NULL);
+	kfree(dev->bounce_buf);
+}
+
+static struct ps3_system_bus_driver ps3rom = {
+	.match_id	= PS3_MATCH_ID_STOR_ROM,
+	.core.name	= DEVICE_NAME,
+	.core.owner	= THIS_MODULE,
+	.probe		= ps3rom_probe,
+	.remove		= ps3rom_remove
+};
+
+
+static int __init ps3rom_init(void)
+{
+	return ps3_system_bus_driver_register(&ps3rom);
+}
+
+static void __exit ps3rom_exit(void)
+{
+	ps3_system_bus_driver_unregister(&ps3rom);
+}
+
+module_init(ps3rom_init);
+module_exit(ps3rom_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PS3 BD/DVD/CD-ROM Storage Driver");
+MODULE_AUTHOR("Sony Corporation");
+MODULE_ALIAS(PS3_MODULE_ALIAS_STOR_ROM);