Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 513 insertions, 0 deletions

diff --git a/drivers/scsi/snic/snic_fwint.h b/drivers/scsi/snic/snic_fwint.h
new file mode 100644
index 000000000..2550ba964
--- /dev/null
+++ b/drivers/scsi/snic/snic_fwint.h
@@ -0,0 +1,513 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright 2014 Cisco Systems, Inc.  All rights reserved. */
+
+#ifndef __SNIC_FWINT_H
+#define __SNIC_FWINT_H
+
+#define SNIC_CDB_LEN	32	/* SCSI CDB size 32, can be used for 16 bytes */
+#define LUN_ADDR_LEN	8
+
+/*
+ * Command entry type
+ */
+enum snic_io_type {
+	/*
+	 * Initiator request types
+	 */
+	SNIC_REQ_REPORT_TGTS = 0x2,	/* Report Targets */
+	SNIC_REQ_ICMND,			/* Initiator command for SCSI IO */
+	SNIC_REQ_ITMF,			/* Initiator command for Task Mgmt */
+	SNIC_REQ_HBA_RESET,		/* SNIC Reset */
+	SNIC_REQ_EXCH_VER,		/* Exchange Version Information */
+	SNIC_REQ_TGT_INFO,		/* Backend/Target Information */
+	SNIC_REQ_BOOT_LUNS,
+
+	/*
+	 * Response type
+	 */
+	SNIC_RSP_REPORT_TGTS_CMPL = 0x12,/* Report Targets Completion */
+	SNIC_RSP_ICMND_CMPL,		/* SCSI IO Completion */
+	SNIC_RSP_ITMF_CMPL,		/* Task Management Completion */
+	SNIC_RSP_HBA_RESET_CMPL,	/* SNIC Reset Completion */
+	SNIC_RSP_EXCH_VER_CMPL,		/* Exchange Version Completion*/
+	SNIC_RSP_BOOT_LUNS_CMPL,
+
+	/*
+	 * Misc Request types
+	 */
+	SNIC_MSG_ACK = 0x80,		/* Ack: snic_notify_msg */
+	SNIC_MSG_ASYNC_EVNOTIFY,	/* Asynchronous Event Notification */
+}; /* end of enum snic_io_type */
+
+
+/*
+ * Header status codes from firmware
+ */
+enum snic_io_status {
+	SNIC_STAT_IO_SUCCESS = 0,	/* request was successful */
+
+	/*
+	 * If a request to the fw is rejected, the original request header
+	 * will be returned with the status set to one of the following:
+	 */
+	SNIC_STAT_INVALID_HDR,	/* header contains invalid data */
+	SNIC_STAT_OUT_OF_RES,	/* out of resources to complete request */
+	SNIC_STAT_INVALID_PARM,	/* some parameter in request is not valid */
+	SNIC_STAT_REQ_NOT_SUP,	/* req type is not supported */
+	SNIC_STAT_IO_NOT_FOUND,	/* requested IO was not found */
+
+	/*
+	 * Once a request is processed, the fw will usually return
+	 * a cmpl message type. In cases where errors occurred,
+	 * the header status would be filled in with one of the following:
+	 */
+	SNIC_STAT_ABORTED,		/* req was aborted */
+	SNIC_STAT_TIMEOUT,		/* req was timed out */
+	SNIC_STAT_SGL_INVALID,		/* req was aborted due to sgl error */
+	SNIC_STAT_DATA_CNT_MISMATCH,	/*recv/sent more/less data than expec */
+	SNIC_STAT_FW_ERR,		/* req was terminated due to fw error */
+	SNIC_STAT_ITMF_REJECT,		/* itmf req was rejected by target */
+	SNIC_STAT_ITMF_FAIL,		/* itmf req was failed */
+	SNIC_STAT_ITMF_INCORRECT_LUN,	/* itmf req has incorrect LUN id*/
+	SNIC_STAT_CMND_REJECT,		/* req was invalid and rejected */
+	SNIC_STAT_DEV_OFFLINE,		/* req sent to offline device */
+	SNIC_STAT_NO_BOOTLUN,
+	SNIC_STAT_SCSI_ERR,		/* SCSI error returned by Target. */
+	SNIC_STAT_NOT_READY,		/* sNIC Subsystem is not ready */
+	SNIC_STAT_FATAL_ERROR,		/* sNIC is in unrecoverable state */
+}; /* end of enum snic_io_status */
+
+/*
+ * snic_io_hdr : host <--> firmware
+ *
+ * for any other message that will be queued to firmware should
+ *  have the following request header
+ */
+struct snic_io_hdr {
+	__le32	hid;
+	__le32	cmnd_id;	/* tag here */
+	ulong	init_ctx;	/* initiator context */
+	u8	type;		/* request/response type */
+	u8	status;		/* header status entry */
+	u8	protocol;	/* Protocol specific, may needed for RoCE*/
+	u8	flags;
+	__le16	sg_cnt;
+	u16	resvd;
+};
+
+/* auxillary funciton for encoding the snic_io_hdr */
+static inline void
+snic_io_hdr_enc(struct snic_io_hdr *hdr, u8 typ, u8 status, u32 id, u32 hid,
+		u16 sg_cnt, ulong ctx)
+{
+	hdr->type = typ;
+	hdr->status = status;
+	hdr->protocol = 0;
+	hdr->hid = cpu_to_le32(hid);
+	hdr->cmnd_id = cpu_to_le32(id);
+	hdr->sg_cnt = cpu_to_le16(sg_cnt);
+	hdr->init_ctx = ctx;
+	hdr->flags = 0;
+}
+
+/* auxillary funciton for decoding the snic_io_hdr */
+static inline void
+snic_io_hdr_dec(struct snic_io_hdr *hdr, u8 *typ, u8 *stat, u32 *cmnd_id,
+		u32 *hid, ulong *ctx)
+{
+	*typ = hdr->type;
+	*stat = hdr->status;
+	*hid = le32_to_cpu(hdr->hid);
+	*cmnd_id = le32_to_cpu(hdr->cmnd_id);
+	*ctx = hdr->init_ctx;
+}
+
+/*
+ * snic_host_info: host -> firmware
+ *
+ * Used for sending host information to firmware, and request fw version
+ */
+struct snic_exch_ver_req {
+	__le32	drvr_ver;	/* for debugging, when fw dump captured */
+	__le32	os_type;	/* for OS specific features */
+};
+
+/*
+ * os_type flags
+ * Bit 0-7 : OS information
+ * Bit 8-31: Feature/Capability Information
+ */
+#define SNIC_OS_LINUX	0x1
+#define SNIC_OS_WIN	0x2
+#define SNIC_OS_ESX	0x3
+
+/*
+ * HBA Capabilities
+ * Bit 1: Reserved.
+ * Bit 2: Dynamic Discovery of LUNs.
+ * Bit 3: Async event notifications on tgt online/offline events.
+ * Bit 4: IO timeout support in FW.
+ * Bit 5-31: Reserved.
+ */
+#define SNIC_HBA_CAP_DDL	0x02	/* Supports Dynamic Discovery of LUNs */
+#define SNIC_HBA_CAP_AEN	0x04	/* Supports Async Event Noitifcation */
+#define SNIC_HBA_CAP_TMO	0x08	/* Supports IO timeout in FW */
+
+/*
+ * snic_exch_ver_rsp : firmware -> host
+ *
+ * Used by firmware to send response to version request
+ */
+struct snic_exch_ver_rsp {
+	__le32	version;
+	__le32	hid;
+	__le32	max_concur_ios;		/* max concurrent ios */
+	__le32	max_sgs_per_cmd;	/* max sgls per IO */
+	__le32	max_io_sz;		/* max io size supported */
+	__le32	hba_cap;		/* hba capabilities */
+	__le32	max_tgts;		/* max tgts supported */
+	__le16	io_timeout;		/* FW extended timeout */
+	u16	rsvd;
+};
+
+
+/*
+ * snic_report_tgts : host -> firmware request
+ *
+ * Used by the host to request list of targets
+ */
+struct snic_report_tgts {
+	__le16	sg_cnt;
+	__le16	flags;		/* specific flags from fw */
+	u8	_resvd[4];
+	__le64	sg_addr;	/* Points to SGL */
+	__le64	sense_addr;
+};
+
+enum snic_type {
+	SNIC_NONE = 0x0,
+	SNIC_DAS,
+	SNIC_SAN,
+};
+
+
+/* Report Target Response */
+enum snic_tgt_type {
+	SNIC_TGT_NONE = 0x0,
+	SNIC_TGT_DAS,	/* DAS Target */
+	SNIC_TGT_SAN,	/* SAN Target */
+};
+
+/* target id format */
+struct snic_tgt_id {
+	__le32	tgt_id;		/* target id */
+	__le16	tgt_type;	/* tgt type */
+	__le16	vnic_id;	/* corresponding vnic id */
+};
+
+/*
+ * snic_report_tgts_cmpl : firmware -> host response
+ *
+ * Used by firmware to send response to Report Targets request
+ */
+struct snic_report_tgts_cmpl {
+	__le32	tgt_cnt;	/* Number of Targets accessible */
+	u32	_resvd;
+};
+
+/*
+ * Command flags
+ *
+ * Bit 0: Read flags
+ * Bit 1: Write flag
+ * Bit 2: ESGL - sg/esg array contains extended sg
+ *	  ESGE - is a host buffer contains sg elements
+ * Bit 3-4: Task Attributes
+ *		00b - simple
+ *		01b - head of queue
+ *		10b - ordered
+ * Bit 5-7: Priority - future use
+ * Bit 8-15: Reserved
+ */
+
+#define SNIC_ICMND_WR		0x01	/* write command */
+#define SNIC_ICMND_RD		0x02	/* read command */
+#define SNIC_ICMND_ESGL		0x04	/* SGE/ESGE array contains valid data*/
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define SNIC_ICMND_TSK_SHIFT		2	/* task attr starts at bit 2 */
+#define SNIC_ICMND_TSK_MASK(x)		((x>>SNIC_ICMND_TSK_SHIFT) & ~(0xffff))
+#define SNIC_ICMND_TSK_SIMPLE		0	/* simple task attr */
+#define SNIC_ICMND_TSK_HEAD_OF_QUEUE	1	/* head of qeuue task attr */
+#define SNIC_ICMND_TSK_ORDERED		2	/* ordered task attr */
+
+#define SNIC_ICMND_PRI_SHIFT		5	/* prio val starts at bit 5 */
+
+/*
+ * snic_icmnd : host-> firmware request
+ *
+ * used for sending out an initiator SCSI 16/32-byte command
+ */
+struct snic_icmnd {
+	__le16	sg_cnt;		/* Number of SG Elements */
+	__le16	flags;		/* flags */
+	__le32	sense_len;	/* Sense buffer length */
+	__le64	tgt_id;		/* Destination Target ID */
+	__le64	lun_id;		/* Destination LUN ID */
+	u8	cdb_len;
+	u8	_resvd;
+	__le16	time_out;	/* ms time for Res allocations fw to handle io*/
+	__le32	data_len;	/* Total number of bytes to be transferred */
+	u8	cdb[SNIC_CDB_LEN];
+	__le64	sg_addr;	/* Points to SG List */
+	__le64	sense_addr;	/* Sense buffer address */
+};
+
+
+/* Response flags */
+/* Bit 0: Under run
+ * Bit 1: Over Run
+ * Bit 2-7: Reserved
+ */
+#define SNIC_ICMND_CMPL_UNDR_RUN	0x01	/* resid under and valid */
+#define SNIC_ICMND_CMPL_OVER_RUN	0x02	/* resid over and valid */
+
+/*
+ * snic_icmnd_cmpl: firmware -> host response
+ *
+ * Used for sending the host a response to an icmnd (initiator command)
+ */
+struct snic_icmnd_cmpl {
+	u8	scsi_status;	/* value as per SAM */
+	u8	flags;
+	__le16	sense_len;	/* Sense Length */
+	__le32	resid;		/* Residue : # bytes under or over run */
+};
+
+/*
+ * snic_itmf: host->firmware request
+ *
+ * used for requesting the firmware to abort a request and/or send out
+ * a task management function
+ *
+ * the req_id field is valid in case of abort task and clear task
+ */
+struct snic_itmf {
+	u8	tm_type;	/* SCSI Task Management request */
+	u8	resvd;
+	__le16	flags;		/* flags */
+	__le32	req_id;		/* Command id of snic req to be aborted */
+	__le64	tgt_id;		/* Target ID */
+	__le64	lun_id;		/* Destination LUN ID */
+	__le16	timeout;	/* in sec */
+};
+
+/*
+ * Task Management Request
+ */
+enum snic_itmf_tm_type {
+	SNIC_ITMF_ABTS_TASK = 0x01,	/* Abort Task */
+	SNIC_ITMF_ABTS_TASK_SET,	/* Abort Task Set */
+	SNIC_ITMF_CLR_TASK,		/* Clear Task */
+	SNIC_ITMF_CLR_TASKSET,		/* Clear Task Set */
+	SNIC_ITMF_LUN_RESET,		/* Lun Reset */
+	SNIC_ITMF_ABTS_TASK_TERM,	/* Supported for SAN Targets */
+};
+
+/*
+ * snic_itmf_cmpl: firmware -> host resposne
+ *
+ * used for sending the host a response for a itmf request
+ */
+struct snic_itmf_cmpl {
+	__le32	nterminated;	/* # IOs terminated as a result of tmf */
+	u8	flags;		/* flags */
+	u8	_resvd[3];
+};
+
+/*
+ * itmfl_cmpl flags
+ * Bit 0 : 1 - Num terminated field valid
+ * Bit 1 - 7 : Reserved
+ */
+#define SNIC_NUM_TERM_VALID	0x01	/* Number of IOs terminated */
+
+/*
+ * snic_hba_reset: host -> firmware request
+ *
+ * used for requesting firmware to reset snic
+ */
+struct snic_hba_reset {
+	__le16	flags;		/* flags */
+	u8	_resvd[6];
+};
+
+/*
+ * snic_hba_reset_cmpl: firmware -> host response
+ *
+ * Used by firmware to respond to the host's hba reset request
+ */
+struct snic_hba_reset_cmpl {
+	u8	flags;		/* flags : more info needs to be added*/
+	u8	_resvd[7];
+};
+
+/*
+ * snic_notify_msg: firmware -> host response
+ *
+ * Used by firmware to notify host of the last work queue entry received
+ */
+struct snic_notify_msg {
+	__le32	wqe_num;	/* wq entry number */
+	u8	flags;		/* flags, macros */
+	u8	_resvd[4];
+};
+
+
+#define SNIC_EVDATA_LEN		24	/* in bytes */
+/* snic_async_evnotify: firmware -> host notification
+ *
+ * Used by firmware to notify the host about configuration/state changes
+ */
+struct snic_async_evnotify {
+	u8	FLS_EVENT_DESC;
+	u8	vnic;			/* vnic id */
+	u8	_resvd[2];
+	__le32	ev_id;			/* Event ID */
+	u8	ev_data[SNIC_EVDATA_LEN]; /* Event Data */
+	u8	_resvd2[4];
+};
+
+/* async event flags */
+enum snic_ev_type {
+	SNIC_EV_TGT_OFFLINE = 0x01, /* Target Offline, PL contains TGT ID */
+	SNIC_EV_TGT_ONLINE,	/* Target Online, PL contains TGT ID */
+	SNIC_EV_LUN_OFFLINE,	/* LUN Offline, PL contains LUN ID */
+	SNIC_EV_LUN_ONLINE,	/* LUN Online, PL contains LUN ID */
+	SNIC_EV_CONF_CHG,	/* Dev Config/Attr Change Event */
+	SNIC_EV_TGT_ADDED,	/* Target Added */
+	SNIC_EV_TGT_DELTD,	/* Target Del'd, PL contains TGT ID */
+	SNIC_EV_LUN_ADDED,	/* LUN Added */
+	SNIC_EV_LUN_DELTD,	/* LUN Del'd, PL cont. TGT & LUN ID */
+
+	SNIC_EV_DISC_CMPL = 0x10, /* Discovery Completed Event */
+};
+
+
+#define SNIC_HOST_REQ_LEN	128	/*Exp length of host req, wq desc sz*/
+/* Payload 88 bytes = 128 - 24 - 16 */
+#define SNIC_HOST_REQ_PAYLOAD	((int)(SNIC_HOST_REQ_LEN -		\
+					sizeof(struct snic_io_hdr) -	\
+					(2 * sizeof(u64)) - sizeof(ulong)))
+
+/*
+ * snic_host_req: host -> firmware request
+ *
+ * Basic structure for all snic requests that are sent from the host to
+ * firmware. They are 128 bytes in size.
+ */
+struct snic_host_req {
+	u64	ctrl_data[2];	/*16 bytes - Control Data */
+	struct snic_io_hdr hdr;
+	union {
+		/*
+		 * Entry specific space, last byte contains color
+		 */
+		u8	buf[SNIC_HOST_REQ_PAYLOAD];
+
+		/*
+		 * Exchange firmware version
+		 */
+		struct snic_exch_ver_req	exch_ver;
+
+		/* report targets */
+		struct snic_report_tgts		rpt_tgts;
+
+		/* io request */
+		struct snic_icmnd		icmnd;
+
+		/* task management request */
+		struct snic_itmf		itmf;
+
+		/* hba reset */
+		struct snic_hba_reset		reset;
+	} u;
+
+	ulong req_pa;
+}; /* end of snic_host_req structure */
+
+
+#define SNIC_FW_REQ_LEN		64 /* Expected length of fw req */
+struct snic_fw_req {
+	struct snic_io_hdr hdr;
+	union {
+		/*
+		 * Entry specific space, last byte contains color
+		 */
+		u8	buf[SNIC_FW_REQ_LEN - sizeof(struct snic_io_hdr)];
+
+		/* Exchange Version Response */
+		struct snic_exch_ver_rsp	exch_ver_cmpl;
+
+		/* Report Targets Response */
+		struct snic_report_tgts_cmpl	rpt_tgts_cmpl;
+
+		/* scsi response */
+		struct snic_icmnd_cmpl		icmnd_cmpl;
+
+		/* task management response */
+		struct snic_itmf_cmpl		itmf_cmpl;
+
+		/* hba reset response */
+		struct snic_hba_reset_cmpl	reset_cmpl;
+
+		/* notify message */
+		struct snic_notify_msg		ack;
+
+		/* async notification event */
+		struct snic_async_evnotify	async_ev;
+
+	} u;
+}; /* end of snic_fw_req structure */
+
+/*
+ * Auxillary macro to verify specific snic req/cmpl structures
+ * to ensure that it will be aligned to 64 bit, and not using
+ * color bit field
+ */
+#define VERIFY_REQ_SZ(x)
+#define VERIFY_CMPL_SZ(x)
+
+/*
+ * Access routines to encode and decode the color bit, which is the most
+ * significant bit of the structure.
+ */
+static inline void
+snic_color_enc(struct snic_fw_req *req, u8 color)
+{
+	u8 *c = ((u8 *) req) + sizeof(struct snic_fw_req) - 1;
+
+	if (color)
+		*c |= 0x80;
+	else
+		*c &= ~0x80;
+}
+
+static inline void
+snic_color_dec(struct snic_fw_req *req, u8 *color)
+{
+	u8 *c = ((u8 *) req) + sizeof(struct snic_fw_req) - 1;
+
+	*color = *c >> 7;
+
+	/* Make sure color bit is read from desc *before* other fields
+	 * are read from desc. Hardware guarantees color bit is last
+	 * bit (byte) written. Adding the rmb() prevents the compiler
+	 * and/or CPU from reordering the reads which would potentially
+	 * result in reading stale values.
+	 */
+	rmb();
+}
+#endif /* end of __SNIC_FWINT_H */