Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 245 insertions, 0 deletions

diff --git a/drivers/scsi/st.h b/drivers/scsi/st.h
new file mode 100644
index 000000000..7a68eaba7
--- /dev/null
+++ b/drivers/scsi/st.h
@@ -0,0 +1,245 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ST_H
+#define _ST_H
+
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/kref.h>
+#include <scsi/scsi_cmnd.h>
+
+/* Descriptor for analyzed sense data */
+struct st_cmdstatus {
+	int midlevel_result;
+	struct scsi_sense_hdr sense_hdr;
+	int have_sense;
+	int residual;
+	u64 uremainder64;
+	u8 flags;
+	u8 remainder_valid;
+	u8 fixed_format;
+	u8 deferred;
+};
+
+struct scsi_tape;
+
+/* scsi tape command */
+struct st_request {
+	unsigned char cmd[MAX_COMMAND_SIZE];
+	unsigned char sense[SCSI_SENSE_BUFFERSIZE];
+	int result;
+	struct scsi_tape *stp;
+	struct completion *waiting;
+	struct bio *bio;
+};
+
+/* The tape buffer descriptor. */
+struct st_buffer {
+	unsigned char cleared;  /* internal buffer cleared after open? */
+	unsigned short do_dio;  /* direct i/o set up? */
+	int buffer_size;
+	int buffer_blocks;
+	int buffer_bytes;
+	int read_pointer;
+	int writing;
+	int syscall_result;
+	struct st_request *last_SRpnt;
+	struct st_cmdstatus cmdstat;
+	struct page **reserved_pages;
+	int reserved_page_order;
+	struct page **mapped_pages;
+	struct rq_map_data map_data;
+	unsigned char *b_data;
+	unsigned short use_sg;	/* zero or max number of s/g segments for this adapter */
+	unsigned short sg_segs;		/* number of segments in s/g list */
+	unsigned short frp_segs;	/* number of buffer segments */
+};
+
+/* The tape mode definition */
+struct st_modedef {
+	unsigned char defined;
+	unsigned char sysv;	/* SYS V semantics? */
+	unsigned char do_async_writes;
+	unsigned char do_buffer_writes;
+	unsigned char do_read_ahead;
+	unsigned char defaults_for_writes;
+	unsigned char default_compression;	/* 0 = don't touch, etc */
+	short default_density;	/* Forced density, -1 = no value */
+	int default_blksize;	/* Forced blocksize, -1 = no value */
+	struct scsi_tape *tape;
+	struct device *devs[2];  /* Auto-rewind and non-rewind devices */
+	struct cdev *cdevs[2];  /* Auto-rewind and non-rewind devices */
+};
+
+/* Number of modes can be changed by changing ST_NBR_MODE_BITS. The maximum
+   number of modes is 16 (ST_NBR_MODE_BITS 4) */
+#define ST_NBR_MODE_BITS 2
+#define ST_NBR_MODES (1 << ST_NBR_MODE_BITS)
+#define ST_MODE_SHIFT (7 - ST_NBR_MODE_BITS)
+#define ST_MODE_MASK ((ST_NBR_MODES - 1) << ST_MODE_SHIFT)
+
+#define ST_MAX_TAPES (1 << (20 - (ST_NBR_MODE_BITS + 1)))
+#define ST_MAX_TAPE_ENTRIES  (ST_MAX_TAPES << (ST_NBR_MODE_BITS + 1))
+
+/* The status related to each partition */
+struct st_partstat {
+	unsigned char rw;
+	unsigned char eof;
+	unsigned char at_sm;
+	unsigned char last_block_valid;
+	u32 last_block_visited;
+	int drv_block;		/* The block where the drive head is */
+	int drv_file;
+};
+
+/* Tape statistics */
+struct scsi_tape_stats {
+	atomic64_t read_byte_cnt;  /* bytes read */
+	atomic64_t write_byte_cnt; /* bytes written */
+	atomic64_t in_flight;      /* Number of I/Os in flight */
+	atomic64_t read_cnt;       /* Count of read requests */
+	atomic64_t write_cnt;      /* Count of write requests */
+	atomic64_t other_cnt;      /* Count of other requests either
+				    * implicit or from user space
+				    * ioctl. */
+	atomic64_t resid_cnt;      /* Count of resid_len > 0 */
+	atomic64_t tot_read_time;  /* ktime spent completing reads */
+	atomic64_t tot_write_time; /* ktime spent completing writes */
+	atomic64_t tot_io_time;    /* ktime spent doing any I/O */
+	ktime_t read_time;         /* holds ktime request was queued */
+	ktime_t write_time;        /* holds ktime request was queued */
+	ktime_t other_time;        /* holds ktime request was queued */
+	atomic_t last_read_size;   /* Number of bytes issued for last read */
+	atomic_t last_write_size;  /* Number of bytes issued for last write */
+};
+
+#define ST_NBR_PARTITIONS 4
+
+/* The tape drive descriptor */
+struct scsi_tape {
+	struct scsi_device *device;
+	struct mutex lock;	/* For serialization */
+	struct completion wait;	/* For SCSI commands */
+	struct st_buffer *buffer;
+	int index;
+
+	/* Drive characteristics */
+	unsigned char omit_blklims;
+	unsigned char do_auto_lock;
+	unsigned char can_bsr;
+	unsigned char can_partitions;
+	unsigned char two_fm;
+	unsigned char fast_mteom;
+	unsigned char immediate;
+	unsigned char scsi2_logical;
+	unsigned char default_drvbuffer;	/* 0xff = don't touch, value 3 bits */
+	unsigned char cln_mode;			/* 0 = none, otherwise sense byte nbr */
+	unsigned char cln_sense_value;
+	unsigned char cln_sense_mask;
+	unsigned char use_pf;			/* Set Page Format bit in all mode selects? */
+	unsigned char try_dio;			/* try direct i/o in general? */
+	unsigned char try_dio_now;		/* try direct i/o before next close? */
+	unsigned char c_algo;			/* compression algorithm */
+	unsigned char pos_unknown;			/* after reset position unknown */
+	unsigned char sili;			/* use SILI when reading in variable b mode */
+	unsigned char immediate_filemark;	/* write filemark immediately */
+	int tape_type;
+	int long_timeout;	/* timeout for commands known to take long time */
+
+	/* Mode characteristics */
+	struct st_modedef modes[ST_NBR_MODES];
+	int current_mode;
+
+	/* Status variables */
+	int partition;
+	int new_partition;
+	int nbr_partitions;	/* zero until partition support enabled */
+	struct st_partstat ps[ST_NBR_PARTITIONS];
+	unsigned char dirty;
+	unsigned char ready;
+	unsigned char write_prot;
+	unsigned char drv_write_prot;
+	unsigned char in_use;
+	unsigned char blksize_changed;
+	unsigned char density_changed;
+	unsigned char compression_changed;
+	unsigned char drv_buffer;
+	unsigned char density;
+	unsigned char door_locked;
+	unsigned char autorew_dev;   /* auto-rewind device */
+	unsigned char rew_at_close;  /* rewind necessary at close */
+	unsigned char inited;
+	unsigned char cleaning_req;  /* cleaning requested? */
+	int block_size;
+	int min_block;
+	int max_block;
+	int recover_count;     /* From tape opening */
+	int recover_reg;       /* From last status call */
+
+#if DEBUG
+	unsigned char write_pending;
+	int nbr_finished;
+	int nbr_waits;
+	int nbr_requests;
+	int nbr_dio;
+	int nbr_pages;
+	unsigned char last_cmnd[6];
+	unsigned char last_sense[16];
+#endif
+	char name[DISK_NAME_LEN];
+	struct kref     kref;
+	struct scsi_tape_stats *stats;
+};
+
+/* Bit masks for use_pf */
+#define USE_PF      1
+#define PF_TESTED   2
+
+/* Values of eof */
+#define	ST_NOEOF	0
+#define ST_FM_HIT       1
+#define ST_FM           2
+#define ST_EOM_OK       3
+#define ST_EOM_ERROR	4
+#define	ST_EOD_1        5
+#define ST_EOD_2        6
+#define ST_EOD		7
+/* EOD hit while reading => ST_EOD_1 => return zero => ST_EOD_2 =>
+   return zero => ST_EOD, return ENOSPC */
+/* When writing: ST_EOM_OK == early warning found, write OK
+		 ST_EOD_1  == allow trying new write after early warning
+		 ST_EOM_ERROR == early warning found, not able to write all */
+
+/* Values of rw */
+#define	ST_IDLE		0
+#define	ST_READING	1
+#define	ST_WRITING	2
+
+/* Values of ready state */
+#define ST_READY	0
+#define ST_NOT_READY	1
+#define ST_NO_TAPE	2
+
+/* Values for door lock state */
+#define ST_UNLOCKED	0
+#define ST_LOCKED_EXPLICIT 1
+#define ST_LOCKED_AUTO  2
+#define ST_LOCK_FAILS   3
+
+/* Positioning SCSI-commands for Tandberg, etc. drives */
+#define	QFA_REQUEST_BLOCK	0x02
+#define	QFA_SEEK_BLOCK		0x0c
+
+/* Setting the binary options */
+#define ST_DONT_TOUCH  0
+#define ST_NO          1
+#define ST_YES         2
+
+#define EXTENDED_SENSE_START  18
+
+/* Masks for some conditions in the sense data */
+#define SENSE_FMK   0x80
+#define SENSE_EOM   0x40
+#define SENSE_ILI   0x20
+
+#endif