Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 341 insertions, 0 deletions

diff --git a/drivers/scsi/wd33c93.h b/drivers/scsi/wd33c93.h
new file mode 100644
index 000000000..e5e4254b1
--- /dev/null
+++ b/drivers/scsi/wd33c93.h
@@ -0,0 +1,341 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *    wd33c93.h -  Linux device driver definitions for the
+ *                 Commodore Amiga A2091/590 SCSI controller card
+ *
+ *    IMPORTANT: This file is for version 1.25 - 09/Jul/1997
+ *
+ * Copyright (c) 1996 John Shifflett, GeoLog Consulting
+ *    john@geolog.com
+ *    jshiffle@netcom.com
+ */
+#ifndef WD33C93_H
+#define WD33C93_H
+
+
+#define PROC_INTERFACE     /* add code for /proc/scsi/wd33c93/xxx interface */
+#ifdef  PROC_INTERFACE
+#define PROC_STATISTICS    /* add code for keeping various real time stats */
+#endif
+
+#define SYNC_DEBUG         /* extra info on sync negotiation printed */
+#define DEBUGGING_ON       /* enable command-line debugging bitmask */
+#define DEBUG_DEFAULTS 0   /* default debugging bitmask */
+
+
+#ifdef DEBUGGING_ON
+#define DB(f,a) if (hostdata->args & (f)) a;
+#else
+#define DB(f,a)
+#endif
+
+#define uchar unsigned char
+
+
+/* wd register names */
+#define WD_OWN_ID    0x00
+#define WD_CONTROL      0x01
+#define WD_TIMEOUT_PERIOD  0x02
+#define WD_CDB_1     0x03
+#define WD_CDB_2     0x04
+#define WD_CDB_3     0x05
+#define WD_CDB_4     0x06
+#define WD_CDB_5     0x07
+#define WD_CDB_6     0x08
+#define WD_CDB_7     0x09
+#define WD_CDB_8     0x0a
+#define WD_CDB_9     0x0b
+#define WD_CDB_10    0x0c
+#define WD_CDB_11    0x0d
+#define WD_CDB_12    0x0e
+#define WD_TARGET_LUN      0x0f
+#define WD_COMMAND_PHASE   0x10
+#define WD_SYNCHRONOUS_TRANSFER 0x11
+#define WD_TRANSFER_COUNT_MSB 0x12
+#define WD_TRANSFER_COUNT  0x13
+#define WD_TRANSFER_COUNT_LSB 0x14
+#define WD_DESTINATION_ID  0x15
+#define WD_SOURCE_ID    0x16
+#define WD_SCSI_STATUS     0x17
+#define WD_COMMAND      0x18
+#define WD_DATA      0x19
+#define WD_QUEUE_TAG    0x1a
+#define WD_AUXILIARY_STATUS   0x1f
+
+/* WD commands */
+#define WD_CMD_RESET    0x00
+#define WD_CMD_ABORT    0x01
+#define WD_CMD_ASSERT_ATN  0x02
+#define WD_CMD_NEGATE_ACK  0x03
+#define WD_CMD_DISCONNECT  0x04
+#define WD_CMD_RESELECT    0x05
+#define WD_CMD_SEL_ATN     0x06
+#define WD_CMD_SEL      0x07
+#define WD_CMD_SEL_ATN_XFER   0x08
+#define WD_CMD_SEL_XFER    0x09
+#define WD_CMD_RESEL_RECEIVE  0x0a
+#define WD_CMD_RESEL_SEND  0x0b
+#define WD_CMD_WAIT_SEL_RECEIVE 0x0c
+#define WD_CMD_TRANS_ADDR  0x18
+#define WD_CMD_TRANS_INFO  0x20
+#define WD_CMD_TRANSFER_PAD   0x21
+#define WD_CMD_SBT_MODE    0x80
+
+/* ASR register */
+#define ASR_INT         (0x80)
+#define ASR_LCI         (0x40)
+#define ASR_BSY         (0x20)
+#define ASR_CIP         (0x10)
+#define ASR_PE          (0x02)
+#define ASR_DBR         (0x01)
+
+/* SCSI Bus Phases */
+#define PHS_DATA_OUT    0x00
+#define PHS_DATA_IN     0x01
+#define PHS_COMMAND     0x02
+#define PHS_STATUS      0x03
+#define PHS_MESS_OUT    0x06
+#define PHS_MESS_IN     0x07
+
+/* Command Status Register definitions */
+
+  /* reset state interrupts */
+#define CSR_RESET    0x00
+#define CSR_RESET_AF    0x01
+
+  /* successful completion interrupts */
+#define CSR_RESELECT    0x10
+#define CSR_SELECT      0x11
+#define CSR_SEL_XFER_DONE  0x16
+#define CSR_XFER_DONE      0x18
+
+  /* paused or aborted interrupts */
+#define CSR_MSGIN    0x20
+#define CSR_SDP         0x21
+#define CSR_SEL_ABORT      0x22
+#define CSR_RESEL_ABORT    0x25
+#define CSR_RESEL_ABORT_AM 0x27
+#define CSR_ABORT    0x28
+
+  /* terminated interrupts */
+#define CSR_INVALID     0x40
+#define CSR_UNEXP_DISC     0x41
+#define CSR_TIMEOUT     0x42
+#define CSR_PARITY      0x43
+#define CSR_PARITY_ATN     0x44
+#define CSR_BAD_STATUS     0x45
+#define CSR_UNEXP    0x48
+
+  /* service required interrupts */
+#define CSR_RESEL    0x80
+#define CSR_RESEL_AM    0x81
+#define CSR_DISC     0x85
+#define CSR_SRV_REQ     0x88
+
+   /* Own ID/CDB Size register */
+#define OWNID_EAF    0x08
+#define OWNID_EHP    0x10
+#define OWNID_RAF    0x20
+#define OWNID_FS_8   0x00
+#define OWNID_FS_12  0x40
+#define OWNID_FS_16  0x80
+
+   /* define these so we don't have to change a2091.c, etc. */
+#define WD33C93_FS_8_10  OWNID_FS_8
+#define WD33C93_FS_12_15 OWNID_FS_12
+#define WD33C93_FS_16_20 OWNID_FS_16
+
+   /* pass input-clock explicitly. accepted mhz values are 8-10,12-20 */
+#define WD33C93_FS_MHZ(mhz) (mhz)
+
+   /* Control register */
+#define CTRL_HSP     0x01
+#define CTRL_HA      0x02
+#define CTRL_IDI     0x04
+#define CTRL_EDI     0x08
+#define CTRL_HHP     0x10
+#define CTRL_POLLED  0x00
+#define CTRL_BURST   0x20
+#define CTRL_BUS     0x40
+#define CTRL_DMA     0x80
+
+   /* Timeout Period register */
+#define TIMEOUT_PERIOD_VALUE  20    /* 20 = 200 ms */
+
+   /* Synchronous Transfer Register */
+#define STR_FSS      0x80
+
+   /* Destination ID register */
+#define DSTID_DPD    0x40
+#define DATA_OUT_DIR 0
+#define DATA_IN_DIR  1
+#define DSTID_SCC    0x80
+
+   /* Source ID register */
+#define SRCID_MASK   0x07
+#define SRCID_SIV    0x08
+#define SRCID_DSP    0x20
+#define SRCID_ES     0x40
+#define SRCID_ER     0x80
+
+   /* This is what the 3393 chip looks like to us */
+typedef struct {
+   volatile unsigned char  *SASR;
+   volatile unsigned char  *SCMD;
+} wd33c93_regs;
+
+
+typedef int (*dma_setup_t) (struct scsi_cmnd *SCpnt, int dir_in);
+typedef void (*dma_stop_t) (struct Scsi_Host *instance,
+		struct scsi_cmnd *SCpnt, int status);
+
+
+#define ILLEGAL_STATUS_BYTE   0xff
+
+#define DEFAULT_SX_PER   376     /* (ns) fairly safe */
+#define DEFAULT_SX_OFF   0       /* aka async */
+
+#define OPTIMUM_SX_PER   252     /* (ns) best we can do (mult-of-4) */
+#define OPTIMUM_SX_OFF   12      /* size of wd3393 fifo */
+
+struct sx_period {
+   unsigned int   period_ns;
+   uchar          reg_value;
+   };
+
+/* FEF: defines for hostdata->dma_buffer_pool */
+
+#define BUF_CHIP_ALLOCED 0
+#define BUF_SCSI_ALLOCED 1
+
+struct WD33C93_hostdata {
+    struct Scsi_Host *next;
+    wd33c93_regs     regs;
+    spinlock_t       lock;
+    uchar            clock_freq;
+    uchar            chip;             /* what kind of wd33c93? */
+    uchar            microcode;        /* microcode rev */
+    uchar            dma_buffer_pool;  /* FEF: buffer from chip_ram? */
+    int              dma_dir;          /* data transfer dir. */
+    dma_setup_t      dma_setup;
+    dma_stop_t       dma_stop;
+    unsigned int     dma_xfer_mask;
+    uchar            *dma_bounce_buffer;
+    unsigned int     dma_bounce_len;
+    volatile uchar   busy[8];          /* index = target, bit = lun */
+    volatile struct scsi_cmnd *input_Q;       /* commands waiting to be started */
+    volatile struct scsi_cmnd *selecting;     /* trying to select this command */
+    volatile struct scsi_cmnd *connected;     /* currently connected command */
+    volatile struct scsi_cmnd *disconnected_Q;/* commands waiting for reconnect */
+    uchar            state;            /* what we are currently doing */
+    uchar            dma;              /* current state of DMA (on/off) */
+    uchar            level2;           /* extent to which Level-2 commands are used */
+    uchar            disconnect;       /* disconnect/reselect policy */
+    unsigned int     args;             /* set from command-line argument */
+    uchar            incoming_msg[8];  /* filled during message_in phase */
+    int              incoming_ptr;     /* mainly used with EXTENDED messages */
+    uchar            outgoing_msg[8];  /* send this during next message_out */
+    int              outgoing_len;     /* length of outgoing message */
+    unsigned int     default_sx_per;   /* default transfer period for SCSI bus */
+    uchar            sync_xfer[8];     /* sync_xfer reg settings per target */
+    uchar            sync_stat[8];     /* status of sync negotiation per target */
+    uchar            no_sync;          /* bitmask: don't do sync on these targets */
+    uchar            no_dma;           /* set this flag to disable DMA */
+    uchar            dma_mode;         /* DMA Burst Mode or Single Byte DMA */
+    uchar            fast;             /* set this flag to enable Fast SCSI */
+    struct sx_period sx_table[9];      /* transfer periods for actual DTC-setting */
+#ifdef PROC_INTERFACE
+    uchar            proc;             /* bitmask: what's in proc output */
+#ifdef PROC_STATISTICS
+    unsigned long    cmd_cnt[8];       /* # of commands issued per target */
+    unsigned long    int_cnt;          /* # of interrupts serviced */
+    unsigned long    pio_cnt;          /* # of pio data transfers */
+    unsigned long    dma_cnt;          /* # of DMA data transfers */
+    unsigned long    disc_allowed_cnt[8]; /* # of disconnects allowed per target */
+    unsigned long    disc_done_cnt[8]; /* # of disconnects done per target*/
+#endif
+#endif
+    };
+
+static inline struct scsi_pointer *WD33C93_scsi_pointer(struct scsi_cmnd *cmd)
+{
+	return scsi_cmd_priv(cmd);
+}
+
+/* defines for hostdata->chip */
+
+#define C_WD33C93       0
+#define C_WD33C93A      1
+#define C_WD33C93B      2
+#define C_UNKNOWN_CHIP  100
+
+/* defines for hostdata->state */
+
+#define S_UNCONNECTED         0
+#define S_SELECTING           1
+#define S_RUNNING_LEVEL2      2
+#define S_CONNECTED           3
+#define S_PRE_TMP_DISC        4
+#define S_PRE_CMP_DISC        5
+
+/* defines for hostdata->dma */
+
+#define D_DMA_OFF          0
+#define D_DMA_RUNNING      1
+
+/* defines for hostdata->level2 */
+/* NOTE: only the first 3 are implemented so far */
+
+#define L2_NONE      1  /* no combination commands - we get lots of ints */
+#define L2_SELECT    2  /* start with SEL_ATN_XFER, but never resume it */
+#define L2_BASIC     3  /* resume after STATUS ints & RDP messages */
+#define L2_DATA      4  /* resume after DATA_IN/OUT ints */
+#define L2_MOST      5  /* resume after anything except a RESELECT int */
+#define L2_RESELECT  6  /* resume after everything, including RESELECT ints */
+#define L2_ALL       7  /* always resume */
+
+/* defines for hostdata->disconnect */
+
+#define DIS_NEVER    0
+#define DIS_ADAPTIVE 1
+#define DIS_ALWAYS   2
+
+/* defines for hostdata->args */
+
+#define DB_TEST1              1<<0
+#define DB_TEST2              1<<1
+#define DB_QUEUE_COMMAND      1<<2
+#define DB_EXECUTE            1<<3
+#define DB_INTR               1<<4
+#define DB_TRANSFER           1<<5
+#define DB_MASK               0x3f
+
+/* defines for hostdata->sync_stat[] */
+
+#define SS_UNSET     0
+#define SS_FIRST     1
+#define SS_WAITING   2
+#define SS_SET       3
+
+/* defines for hostdata->proc */
+
+#define PR_VERSION   1<<0
+#define PR_INFO      1<<1
+#define PR_STATISTICS 1<<2
+#define PR_CONNECTED 1<<3
+#define PR_INPUTQ    1<<4
+#define PR_DISCQ     1<<5
+#define PR_TEST      1<<6
+#define PR_STOP      1<<7
+
+
+void wd33c93_init (struct Scsi_Host *instance, const wd33c93_regs regs,
+         dma_setup_t setup, dma_stop_t stop, int clock_freq);
+int wd33c93_abort (struct scsi_cmnd *cmd);
+int wd33c93_queuecommand (struct Scsi_Host *h, struct scsi_cmnd *cmd);
+void wd33c93_intr (struct Scsi_Host *instance);
+int wd33c93_show_info(struct seq_file *, struct Scsi_Host *);
+int wd33c93_write_info(struct Scsi_Host *, char *, int);
+int wd33c93_host_reset (struct scsi_cmnd *);
+
+#endif /* WD33C93_H */