Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 550 insertions, 0 deletions

diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c
new file mode 100644
index 000000000..219483b79
--- /dev/null
+++ b/drivers/slimbus/core.c
@@ -0,0 +1,550 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2011-2017, The Linux Foundation
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/idr.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slimbus.h>
+#include "slimbus.h"
+
+static DEFINE_IDA(ctrl_ida);
+
+static const struct slim_device_id *slim_match(const struct slim_device_id *id,
+					       const struct slim_device *sbdev)
+{
+	while (id->manf_id != 0 || id->prod_code != 0) {
+		if (id->manf_id == sbdev->e_addr.manf_id &&
+		    id->prod_code == sbdev->e_addr.prod_code &&
+		    id->dev_index == sbdev->e_addr.dev_index &&
+		    id->instance == sbdev->e_addr.instance)
+			return id;
+		id++;
+	}
+	return NULL;
+}
+
+static int slim_device_match(struct device *dev, struct device_driver *drv)
+{
+	struct slim_device *sbdev = to_slim_device(dev);
+	struct slim_driver *sbdrv = to_slim_driver(drv);
+
+	/* Attempt an OF style match first */
+	if (of_driver_match_device(dev, drv))
+		return 1;
+
+	return !!slim_match(sbdrv->id_table, sbdev);
+}
+
+static void slim_device_update_status(struct slim_device *sbdev,
+				      enum slim_device_status status)
+{
+	struct slim_driver *sbdrv;
+
+	if (sbdev->status == status)
+		return;
+
+	sbdev->status = status;
+	if (!sbdev->dev.driver)
+		return;
+
+	sbdrv = to_slim_driver(sbdev->dev.driver);
+	if (sbdrv->device_status)
+		sbdrv->device_status(sbdev, sbdev->status);
+}
+
+static int slim_device_probe(struct device *dev)
+{
+	struct slim_device	*sbdev = to_slim_device(dev);
+	struct slim_driver	*sbdrv = to_slim_driver(dev->driver);
+	int ret;
+
+	ret = sbdrv->probe(sbdev);
+	if (ret)
+		return ret;
+
+	/* try getting the logical address after probe */
+	ret = slim_get_logical_addr(sbdev);
+	if (!ret) {
+		slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_UP);
+	} else {
+		dev_err(&sbdev->dev, "Failed to get logical address\n");
+		ret = -EPROBE_DEFER;
+	}
+
+	return ret;
+}
+
+static void slim_device_remove(struct device *dev)
+{
+	struct slim_device *sbdev = to_slim_device(dev);
+	struct slim_driver *sbdrv;
+
+	if (dev->driver) {
+		sbdrv = to_slim_driver(dev->driver);
+		if (sbdrv->remove)
+			sbdrv->remove(sbdev);
+	}
+}
+
+static int slim_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct slim_device *sbdev = to_slim_device(dev);
+
+	return add_uevent_var(env, "MODALIAS=slim:%s", dev_name(&sbdev->dev));
+}
+
+struct bus_type slimbus_bus = {
+	.name		= "slimbus",
+	.match		= slim_device_match,
+	.probe		= slim_device_probe,
+	.remove		= slim_device_remove,
+	.uevent		= slim_device_uevent,
+};
+EXPORT_SYMBOL_GPL(slimbus_bus);
+
+/*
+ * __slim_driver_register() - Client driver registration with SLIMbus
+ *
+ * @drv:Client driver to be associated with client-device.
+ * @owner: owning module/driver
+ *
+ * This API will register the client driver with the SLIMbus
+ * It is called from the driver's module-init function.
+ */
+int __slim_driver_register(struct slim_driver *drv, struct module *owner)
+{
+	/* ID table and probe are mandatory */
+	if (!(drv->driver.of_match_table || drv->id_table) || !drv->probe)
+		return -EINVAL;
+
+	drv->driver.bus = &slimbus_bus;
+	drv->driver.owner = owner;
+
+	return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(__slim_driver_register);
+
+/*
+ * slim_driver_unregister() - Undo effect of slim_driver_register
+ *
+ * @drv: Client driver to be unregistered
+ */
+void slim_driver_unregister(struct slim_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(slim_driver_unregister);
+
+static void slim_dev_release(struct device *dev)
+{
+	struct slim_device *sbdev = to_slim_device(dev);
+
+	kfree(sbdev);
+}
+
+static int slim_add_device(struct slim_controller *ctrl,
+			   struct slim_device *sbdev,
+			   struct device_node *node)
+{
+	sbdev->dev.bus = &slimbus_bus;
+	sbdev->dev.parent = ctrl->dev;
+	sbdev->dev.release = slim_dev_release;
+	sbdev->dev.driver = NULL;
+	sbdev->ctrl = ctrl;
+	INIT_LIST_HEAD(&sbdev->stream_list);
+	spin_lock_init(&sbdev->stream_list_lock);
+	sbdev->dev.of_node = of_node_get(node);
+	sbdev->dev.fwnode = of_fwnode_handle(node);
+
+	dev_set_name(&sbdev->dev, "%x:%x:%x:%x",
+				  sbdev->e_addr.manf_id,
+				  sbdev->e_addr.prod_code,
+				  sbdev->e_addr.dev_index,
+				  sbdev->e_addr.instance);
+
+	return device_register(&sbdev->dev);
+}
+
+static struct slim_device *slim_alloc_device(struct slim_controller *ctrl,
+					     struct slim_eaddr *eaddr,
+					     struct device_node *node)
+{
+	struct slim_device *sbdev;
+	int ret;
+
+	sbdev = kzalloc(sizeof(*sbdev), GFP_KERNEL);
+	if (!sbdev)
+		return NULL;
+
+	sbdev->e_addr = *eaddr;
+	ret = slim_add_device(ctrl, sbdev, node);
+	if (ret) {
+		put_device(&sbdev->dev);
+		return NULL;
+	}
+
+	return sbdev;
+}
+
+static void of_register_slim_devices(struct slim_controller *ctrl)
+{
+	struct device *dev = ctrl->dev;
+	struct device_node *node;
+
+	if (!ctrl->dev->of_node)
+		return;
+
+	for_each_child_of_node(ctrl->dev->of_node, node) {
+		struct slim_device *sbdev;
+		struct slim_eaddr e_addr;
+		const char *compat = NULL;
+		int reg[2], ret;
+		int manf_id, prod_code;
+
+		compat = of_get_property(node, "compatible", NULL);
+		if (!compat)
+			continue;
+
+		ret = sscanf(compat, "slim%x,%x", &manf_id, &prod_code);
+		if (ret != 2) {
+			dev_err(dev, "Manf ID & Product code not found %s\n",
+				compat);
+			continue;
+		}
+
+		ret = of_property_read_u32_array(node, "reg", reg, 2);
+		if (ret) {
+			dev_err(dev, "Device and Instance id not found:%d\n",
+				ret);
+			continue;
+		}
+
+		e_addr.dev_index = reg[0];
+		e_addr.instance = reg[1];
+		e_addr.manf_id = manf_id;
+		e_addr.prod_code = prod_code;
+
+		sbdev = slim_alloc_device(ctrl, &e_addr, node);
+		if (!sbdev)
+			continue;
+	}
+}
+
+/*
+ * slim_register_controller() - Controller bring-up and registration.
+ *
+ * @ctrl: Controller to be registered.
+ *
+ * A controller is registered with the framework using this API.
+ * If devices on a controller were registered before controller,
+ * this will make sure that they get probed when controller is up
+ */
+int slim_register_controller(struct slim_controller *ctrl)
+{
+	int id;
+
+	id = ida_alloc(&ctrl_ida, GFP_KERNEL);
+	if (id < 0)
+		return id;
+
+	ctrl->id = id;
+
+	if (!ctrl->min_cg)
+		ctrl->min_cg = SLIM_MIN_CLK_GEAR;
+	if (!ctrl->max_cg)
+		ctrl->max_cg = SLIM_MAX_CLK_GEAR;
+
+	ida_init(&ctrl->laddr_ida);
+	idr_init(&ctrl->tid_idr);
+	mutex_init(&ctrl->lock);
+	mutex_init(&ctrl->sched.m_reconf);
+	init_completion(&ctrl->sched.pause_comp);
+	spin_lock_init(&ctrl->txn_lock);
+
+	dev_dbg(ctrl->dev, "Bus [%s] registered:dev:%p\n",
+		ctrl->name, ctrl->dev);
+
+	of_register_slim_devices(ctrl);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_register_controller);
+
+/* slim_remove_device: Remove the effect of slim_add_device() */
+static void slim_remove_device(struct slim_device *sbdev)
+{
+	of_node_put(sbdev->dev.of_node);
+	device_unregister(&sbdev->dev);
+}
+
+static int slim_ctrl_remove_device(struct device *dev, void *null)
+{
+	slim_remove_device(to_slim_device(dev));
+	return 0;
+}
+
+/**
+ * slim_unregister_controller() - Controller tear-down.
+ *
+ * @ctrl: Controller to tear-down.
+ */
+int slim_unregister_controller(struct slim_controller *ctrl)
+{
+	/* Remove all clients */
+	device_for_each_child(ctrl->dev, NULL, slim_ctrl_remove_device);
+	ida_free(&ctrl_ida, ctrl->id);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_unregister_controller);
+
+/**
+ * slim_report_absent() - Controller calls this function when a device
+ *	reports absent, OR when the device cannot be communicated with
+ *
+ * @sbdev: Device that cannot be reached, or sent report absent
+ */
+void slim_report_absent(struct slim_device *sbdev)
+{
+	struct slim_controller *ctrl = sbdev->ctrl;
+
+	if (!ctrl)
+		return;
+
+	/* invalidate logical addresses */
+	mutex_lock(&ctrl->lock);
+	sbdev->is_laddr_valid = false;
+	mutex_unlock(&ctrl->lock);
+	if (!ctrl->get_laddr)
+		ida_free(&ctrl->laddr_ida, sbdev->laddr);
+	slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_DOWN);
+}
+EXPORT_SYMBOL_GPL(slim_report_absent);
+
+static bool slim_eaddr_equal(struct slim_eaddr *a, struct slim_eaddr *b)
+{
+	return (a->manf_id == b->manf_id &&
+		a->prod_code == b->prod_code &&
+		a->dev_index == b->dev_index &&
+		a->instance == b->instance);
+}
+
+static int slim_match_dev(struct device *dev, void *data)
+{
+	struct slim_eaddr *e_addr = data;
+	struct slim_device *sbdev = to_slim_device(dev);
+
+	return slim_eaddr_equal(&sbdev->e_addr, e_addr);
+}
+
+static struct slim_device *find_slim_device(struct slim_controller *ctrl,
+					    struct slim_eaddr *eaddr)
+{
+	struct slim_device *sbdev;
+	struct device *dev;
+
+	dev = device_find_child(ctrl->dev, eaddr, slim_match_dev);
+	if (dev) {
+		sbdev = to_slim_device(dev);
+		return sbdev;
+	}
+
+	return NULL;
+}
+
+/**
+ * slim_get_device() - get handle to a device.
+ *
+ * @ctrl: Controller on which this device will be added/queried
+ * @e_addr: Enumeration address of the device to be queried
+ *
+ * Return: pointer to a device if it has already reported. Creates a new
+ * device and returns pointer to it if the device has not yet enumerated.
+ */
+struct slim_device *slim_get_device(struct slim_controller *ctrl,
+				    struct slim_eaddr *e_addr)
+{
+	struct slim_device *sbdev;
+
+	sbdev = find_slim_device(ctrl, e_addr);
+	if (!sbdev) {
+		sbdev = slim_alloc_device(ctrl, e_addr, NULL);
+		if (!sbdev)
+			return ERR_PTR(-ENOMEM);
+	}
+
+	return sbdev;
+}
+EXPORT_SYMBOL_GPL(slim_get_device);
+
+static int of_slim_match_dev(struct device *dev, void *data)
+{
+	struct device_node *np = data;
+	struct slim_device *sbdev = to_slim_device(dev);
+
+	return (sbdev->dev.of_node == np);
+}
+
+static struct slim_device *of_find_slim_device(struct slim_controller *ctrl,
+					       struct device_node *np)
+{
+	struct slim_device *sbdev;
+	struct device *dev;
+
+	dev = device_find_child(ctrl->dev, np, of_slim_match_dev);
+	if (dev) {
+		sbdev = to_slim_device(dev);
+		return sbdev;
+	}
+
+	return NULL;
+}
+
+/**
+ * of_slim_get_device() - get handle to a device using dt node.
+ *
+ * @ctrl: Controller on which this device will be added/queried
+ * @np: node pointer to device
+ *
+ * Return: pointer to a device if it has already reported. Creates a new
+ * device and returns pointer to it if the device has not yet enumerated.
+ */
+struct slim_device *of_slim_get_device(struct slim_controller *ctrl,
+				       struct device_node *np)
+{
+	return of_find_slim_device(ctrl, np);
+}
+EXPORT_SYMBOL_GPL(of_slim_get_device);
+
+static int slim_device_alloc_laddr(struct slim_device *sbdev,
+				   bool report_present)
+{
+	struct slim_controller *ctrl = sbdev->ctrl;
+	u8 laddr;
+	int ret;
+
+	mutex_lock(&ctrl->lock);
+	if (ctrl->get_laddr) {
+		ret = ctrl->get_laddr(ctrl, &sbdev->e_addr, &laddr);
+		if (ret < 0)
+			goto err;
+	} else if (report_present) {
+		ret = ida_simple_get(&ctrl->laddr_ida,
+				     0, SLIM_LA_MANAGER - 1, GFP_KERNEL);
+		if (ret < 0)
+			goto err;
+
+		laddr = ret;
+	} else {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (ctrl->set_laddr) {
+		ret = ctrl->set_laddr(ctrl, &sbdev->e_addr, laddr);
+		if (ret) {
+			ret = -EINVAL;
+			goto err;
+		}
+	}
+
+	sbdev->laddr = laddr;
+	sbdev->is_laddr_valid = true;
+	mutex_unlock(&ctrl->lock);
+
+	slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_UP);
+
+	dev_dbg(ctrl->dev, "setting slimbus l-addr:%x, ea:%x,%x,%x,%x\n",
+		laddr, sbdev->e_addr.manf_id, sbdev->e_addr.prod_code,
+		sbdev->e_addr.dev_index, sbdev->e_addr.instance);
+
+	return 0;
+
+err:
+	mutex_unlock(&ctrl->lock);
+	return ret;
+
+}
+
+/**
+ * slim_device_report_present() - Report enumerated device.
+ *
+ * @ctrl: Controller with which device is enumerated.
+ * @e_addr: Enumeration address of the device.
+ * @laddr: Return logical address (if valid flag is false)
+ *
+ * Called by controller in response to REPORT_PRESENT. Framework will assign
+ * a logical address to this enumeration address.
+ * Function returns -EXFULL to indicate that all logical addresses are already
+ * taken.
+ */
+int slim_device_report_present(struct slim_controller *ctrl,
+			       struct slim_eaddr *e_addr, u8 *laddr)
+{
+	struct slim_device *sbdev;
+	int ret;
+
+	ret = pm_runtime_get_sync(ctrl->dev);
+
+	if (ctrl->sched.clk_state != SLIM_CLK_ACTIVE) {
+		dev_err(ctrl->dev, "slim ctrl not active,state:%d, ret:%d\n",
+				    ctrl->sched.clk_state, ret);
+		goto slimbus_not_active;
+	}
+
+	sbdev = slim_get_device(ctrl, e_addr);
+	if (IS_ERR(sbdev))
+		return -ENODEV;
+
+	if (sbdev->is_laddr_valid) {
+		*laddr = sbdev->laddr;
+		return 0;
+	}
+
+	ret = slim_device_alloc_laddr(sbdev, true);
+
+slimbus_not_active:
+	pm_runtime_mark_last_busy(ctrl->dev);
+	pm_runtime_put_autosuspend(ctrl->dev);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(slim_device_report_present);
+
+/**
+ * slim_get_logical_addr() - get/allocate logical address of a SLIMbus device.
+ *
+ * @sbdev: client handle requesting the address.
+ *
+ * Return: zero if a logical address is valid or a new logical address
+ * has been assigned. error code in case of error.
+ */
+int slim_get_logical_addr(struct slim_device *sbdev)
+{
+	if (!sbdev->is_laddr_valid)
+		return slim_device_alloc_laddr(sbdev, false);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_get_logical_addr);
+
+static void __exit slimbus_exit(void)
+{
+	bus_unregister(&slimbus_bus);
+}
+module_exit(slimbus_exit);
+
+static int __init slimbus_init(void)
+{
+	return bus_register(&slimbus_bus);
+}
+postcore_initcall(slimbus_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SLIMbus core");