Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 490 insertions, 0 deletions

diff --git a/drivers/slimbus/stream.c b/drivers/slimbus/stream.c
new file mode 100644
index 000000000..1d6b38657
--- /dev/null
+++ b/drivers/slimbus/stream.c
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/slimbus.h>
+#include <uapi/sound/asound.h>
+#include "slimbus.h"
+
+/**
+ * struct segdist_code - Segment Distributions code from
+ *	Table 20 of SLIMbus Specs Version 2.0
+ *
+ * @ratem: Channel Rate Multipler(Segments per Superframe)
+ * @seg_interval: Number of slots between the first Slot of Segment
+ *		and the first slot of the next  consecutive Segment.
+ * @segdist_code: Segment Distribution Code SD[11:0]
+ * @seg_offset_mask: Segment offset mask in SD[11:0]
+ * @segdist_codes: List of all possible Segmet Distribution codes.
+ */
+static const struct segdist_code {
+	int ratem;
+	int seg_interval;
+	int segdist_code;
+	u32 seg_offset_mask;
+
+} segdist_codes[] = {
+	{1,	1536,	0x200,	 0xdff},
+	{2,	768,	0x100,	 0xcff},
+	{4,	384,	0x080,	 0xc7f},
+	{8,	192,	0x040,	 0xc3f},
+	{16,	96,	0x020,	 0xc1f},
+	{32,	48,	0x010,	 0xc0f},
+	{64,	24,	0x008,	 0xc07},
+	{128,	12,	0x004,	 0xc03},
+	{256,	6,	0x002,	 0xc01},
+	{512,	3,	0x001,	 0xc00},
+	{3,	512,	0xe00,	 0x1ff},
+	{6,	256,	0xd00,	 0x0ff},
+	{12,	128,	0xc80,	 0x07f},
+	{24,	64,	0xc40,	 0x03f},
+	{48,	32,	0xc20,	 0x01f},
+	{96,	16,	0xc10,	 0x00f},
+	{192,	8,	0xc08,	 0x007},
+	{364,	4,	0xc04,	 0x003},
+	{768,	2,	0xc02,	 0x001},
+};
+
+/*
+ * Presence Rate table for all Natural Frequencies
+ * The Presence rate of a constant bitrate stream is mean flow rate of the
+ * stream expressed in occupied Segments of that Data Channel per second.
+ * Table 66 from SLIMbus 2.0 Specs
+ *
+ * Index of the table corresponds to Presence rate code for the respective rate
+ * in the table.
+ */
+static const int slim_presence_rate_table[] = {
+	0, /* Not Indicated */
+	12000,
+	24000,
+	48000,
+	96000,
+	192000,
+	384000,
+	768000,
+	0, /* Reserved */
+	11025,
+	22050,
+	44100,
+	88200,
+	176400,
+	352800,
+	705600,
+	4000,
+	8000,
+	16000,
+	32000,
+	64000,
+	128000,
+	256000,
+	512000,
+};
+
+/**
+ * slim_stream_allocate() - Allocate a new SLIMbus Stream
+ * @dev:Slim device to be associated with
+ * @name: name of the stream
+ *
+ * This is very first call for SLIMbus streaming, this API will allocate
+ * a new SLIMbus stream and return a valid stream runtime pointer for client
+ * to use it in subsequent stream apis. state of stream is set to ALLOCATED
+ *
+ * Return: valid pointer on success and error code on failure.
+ * From ASoC DPCM framework, this state is linked to startup() operation.
+ */
+struct slim_stream_runtime *slim_stream_allocate(struct slim_device *dev,
+						 const char *name)
+{
+	struct slim_stream_runtime *rt;
+
+	rt = kzalloc(sizeof(*rt), GFP_KERNEL);
+	if (!rt)
+		return ERR_PTR(-ENOMEM);
+
+	rt->name = kasprintf(GFP_KERNEL, "slim-%s", name);
+	if (!rt->name) {
+		kfree(rt);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	rt->dev = dev;
+	spin_lock(&dev->stream_list_lock);
+	list_add_tail(&rt->node, &dev->stream_list);
+	spin_unlock(&dev->stream_list_lock);
+
+	return rt;
+}
+EXPORT_SYMBOL_GPL(slim_stream_allocate);
+
+static int slim_connect_port_channel(struct slim_stream_runtime *stream,
+				     struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[2];
+	struct slim_val_inf msg = {0, 2, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_CONNECT_SOURCE;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 6, stream->dev->laddr, &msg);
+
+	if (port->direction == SLIM_PORT_SINK)
+		txn.mc = SLIM_MSG_MC_CONNECT_SINK;
+
+	wbuf[0] = port->id;
+	wbuf[1] = port->ch.id;
+	port->ch.state = SLIM_CH_STATE_ASSOCIATED;
+	port->state = SLIM_PORT_UNCONFIGURED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_disconnect_port(struct slim_stream_runtime *stream,
+				struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[1];
+	struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_DISCONNECT_PORT;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
+
+	wbuf[0] = port->id;
+	port->ch.state = SLIM_CH_STATE_DISCONNECTED;
+	port->state = SLIM_PORT_DISCONNECTED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_deactivate_remove_channel(struct slim_stream_runtime *stream,
+					  struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[1];
+	struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_DEACTIVATE_CHANNEL;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
+	int ret;
+
+	wbuf[0] = port->ch.id;
+	ret = slim_do_transfer(sdev->ctrl, &txn);
+	if (ret)
+		return ret;
+
+	txn.mc = SLIM_MSG_MC_NEXT_REMOVE_CHANNEL;
+	port->ch.state = SLIM_CH_STATE_REMOVED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_get_prate_code(int rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(slim_presence_rate_table); i++) {
+		if (rate == slim_presence_rate_table[i])
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * slim_stream_prepare() - Prepare a SLIMbus Stream
+ *
+ * @rt: instance of slim stream runtime to configure
+ * @cfg: new configuration for the stream
+ *
+ * This API will configure SLIMbus stream with config parameters from cfg.
+ * return zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to hw_params() operation.
+ */
+int slim_stream_prepare(struct slim_stream_runtime *rt,
+			struct slim_stream_config *cfg)
+{
+	struct slim_controller *ctrl = rt->dev->ctrl;
+	struct slim_port *port;
+	int num_ports, i, port_id, prrate;
+
+	if (rt->ports) {
+		dev_err(&rt->dev->dev, "Stream already Prepared\n");
+		return -EINVAL;
+	}
+
+	num_ports = hweight32(cfg->port_mask);
+	rt->ports = kcalloc(num_ports, sizeof(*port), GFP_KERNEL);
+	if (!rt->ports)
+		return -ENOMEM;
+
+	rt->num_ports = num_ports;
+	rt->rate = cfg->rate;
+	rt->bps = cfg->bps;
+	rt->direction = cfg->direction;
+
+	prrate = slim_get_prate_code(cfg->rate);
+	if (prrate < 0) {
+		dev_err(&rt->dev->dev, "Cannot get presence rate for rate %d Hz\n",
+			cfg->rate);
+		return prrate;
+	}
+
+	if (cfg->rate % ctrl->a_framer->superfreq) {
+		/*
+		 * data rate not exactly multiple of super frame,
+		 * use PUSH/PULL protocol
+		 */
+		if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK)
+			rt->prot = SLIM_PROTO_PUSH;
+		else
+			rt->prot = SLIM_PROTO_PULL;
+	} else {
+		rt->prot = SLIM_PROTO_ISO;
+	}
+
+	rt->ratem = cfg->rate/ctrl->a_framer->superfreq;
+
+	i = 0;
+	for_each_set_bit(port_id, &cfg->port_mask, SLIM_DEVICE_MAX_PORTS) {
+		port = &rt->ports[i];
+		port->state = SLIM_PORT_DISCONNECTED;
+		port->id = port_id;
+		port->ch.prrate = prrate;
+		port->ch.id = cfg->chs[i];
+		port->ch.data_fmt = SLIM_CH_DATA_FMT_NOT_DEFINED;
+		port->ch.aux_fmt = SLIM_CH_AUX_FMT_NOT_APPLICABLE;
+		port->ch.state = SLIM_CH_STATE_ALLOCATED;
+
+		if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK)
+			port->direction = SLIM_PORT_SINK;
+		else
+			port->direction = SLIM_PORT_SOURCE;
+
+		slim_connect_port_channel(rt, port);
+		i++;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_stream_prepare);
+
+static int slim_define_channel_content(struct slim_stream_runtime *stream,
+				       struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[4];
+	struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CONTENT;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg);
+
+	wbuf[0] = port->ch.id;
+	wbuf[1] = port->ch.prrate;
+
+	/* Frequency Locked for ISO Protocol */
+	if (stream->prot != SLIM_PROTO_ISO)
+		wbuf[1] |= SLIM_CHANNEL_CONTENT_FL;
+
+	wbuf[2] = port->ch.data_fmt | (port->ch.aux_fmt << 4);
+	wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS;
+	port->ch.state = SLIM_CH_STATE_CONTENT_DEFINED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_get_segdist_code(int ratem)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(segdist_codes); i++) {
+		if (segdist_codes[i].ratem == ratem)
+			return segdist_codes[i].segdist_code;
+	}
+
+	return -EINVAL;
+}
+
+static int slim_define_channel(struct slim_stream_runtime *stream,
+				       struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[4];
+	struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CHANNEL;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg);
+
+	port->ch.seg_dist = slim_get_segdist_code(stream->ratem);
+
+	wbuf[0] = port->ch.id;
+	wbuf[1] = port->ch.seg_dist & 0xFF;
+	wbuf[2] = (stream->prot << 4) | ((port->ch.seg_dist & 0xF00) >> 8);
+	if (stream->prot == SLIM_PROTO_ISO)
+		wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS;
+	else
+		wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS + 1;
+
+	port->ch.state = SLIM_CH_STATE_DEFINED;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+static int slim_activate_channel(struct slim_stream_runtime *stream,
+				 struct slim_port *port)
+{
+	struct slim_device *sdev = stream->dev;
+	u8 wbuf[1];
+	struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
+	u8 mc = SLIM_MSG_MC_NEXT_ACTIVATE_CHANNEL;
+	DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
+
+	txn.msg->num_bytes = 1;
+	txn.msg->wbuf = wbuf;
+	wbuf[0] = port->ch.id;
+	port->ch.state = SLIM_CH_STATE_ACTIVE;
+
+	return slim_do_transfer(sdev->ctrl, &txn);
+}
+
+/**
+ * slim_stream_enable() - Enable a prepared SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to enable
+ *
+ * This API will enable all the ports and channels associated with
+ * SLIMbus stream
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to trigger() start operation.
+ */
+int slim_stream_enable(struct slim_stream_runtime *stream)
+{
+	DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION,
+				3, SLIM_LA_MANAGER, NULL);
+	struct slim_controller *ctrl = stream->dev->ctrl;
+	int ret, i;
+
+	if (ctrl->enable_stream) {
+		ret = ctrl->enable_stream(stream);
+		if (ret)
+			return ret;
+
+		for (i = 0; i < stream->num_ports; i++)
+			stream->ports[i].ch.state = SLIM_CH_STATE_ACTIVE;
+
+		return ret;
+	}
+
+	ret = slim_do_transfer(ctrl, &txn);
+	if (ret)
+		return ret;
+
+	/* define channels first before activating them */
+	for (i = 0; i < stream->num_ports; i++) {
+		struct slim_port *port = &stream->ports[i];
+
+		slim_define_channel(stream, port);
+		slim_define_channel_content(stream, port);
+	}
+
+	for (i = 0; i < stream->num_ports; i++) {
+		struct slim_port *port = &stream->ports[i];
+
+		slim_activate_channel(stream, port);
+		port->state = SLIM_PORT_CONFIGURED;
+	}
+	txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW;
+
+	return slim_do_transfer(ctrl, &txn);
+}
+EXPORT_SYMBOL_GPL(slim_stream_enable);
+
+/**
+ * slim_stream_disable() - Disable a SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to disable
+ *
+ * This API will disable all the ports and channels associated with
+ * SLIMbus stream
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to trigger() pause operation.
+ */
+int slim_stream_disable(struct slim_stream_runtime *stream)
+{
+	DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION,
+				3, SLIM_LA_MANAGER, NULL);
+	struct slim_controller *ctrl = stream->dev->ctrl;
+	int ret, i;
+
+	if (!stream->ports || !stream->num_ports)
+		return -EINVAL;
+
+	if (ctrl->disable_stream)
+		ctrl->disable_stream(stream);
+
+	ret = slim_do_transfer(ctrl, &txn);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < stream->num_ports; i++)
+		slim_deactivate_remove_channel(stream, &stream->ports[i]);
+
+	txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW;
+
+	return slim_do_transfer(ctrl, &txn);
+}
+EXPORT_SYMBOL_GPL(slim_stream_disable);
+
+/**
+ * slim_stream_unprepare() - Un-prepare a SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to unprepare
+ *
+ * This API will un allocate all the ports and channels associated with
+ * SLIMbus stream
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to trigger() stop operation.
+ */
+int slim_stream_unprepare(struct slim_stream_runtime *stream)
+{
+	int i;
+
+	if (!stream->ports || !stream->num_ports)
+		return -EINVAL;
+
+	for (i = 0; i < stream->num_ports; i++)
+		slim_disconnect_port(stream, &stream->ports[i]);
+
+	kfree(stream->ports);
+	stream->ports = NULL;
+	stream->num_ports = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_stream_unprepare);
+
+/**
+ * slim_stream_free() - Free a SLIMbus Stream
+ *
+ * @stream: instance of slim stream runtime to free
+ *
+ * This API will un allocate all the memory associated with
+ * slim stream runtime, user is not allowed to make an dereference
+ * to stream after this call.
+ *
+ * Return: zero on success and error code on failure. From ASoC DPCM framework,
+ * this state is linked to shutdown() operation.
+ */
+int slim_stream_free(struct slim_stream_runtime *stream)
+{
+	struct slim_device *sdev = stream->dev;
+
+	spin_lock(&sdev->stream_list_lock);
+	list_del(&stream->node);
+	spin_unlock(&sdev->stream_list_lock);
+
+	kfree(stream->name);
+	kfree(stream);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(slim_stream_free);