Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 720 insertions, 0 deletions

diff --git a/drivers/soc/rockchip/io-domain.c b/drivers/soc/rockchip/io-domain.c
new file mode 100644
index 000000000..6619256c2
--- /dev/null
+++ b/drivers/soc/rockchip/io-domain.c
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip IO Voltage Domain driver
+ *
+ * Copyright 2014 MundoReader S.L.
+ * Copyright 2014 Google, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define MAX_SUPPLIES		16
+
+/*
+ * The max voltage for 1.8V and 3.3V come from the Rockchip datasheet under
+ * "Recommended Operating Conditions" for "Digital GPIO".   When the typical
+ * is 3.3V the max is 3.6V.  When the typical is 1.8V the max is 1.98V.
+ *
+ * They are used like this:
+ * - If the voltage on a rail is above the "1.8" voltage (1.98V) we'll tell the
+ *   SoC we're at 3.3.
+ * - If the voltage on a rail is above the "3.3" voltage (3.6V) we'll consider
+ *   that to be an error.
+ */
+#define MAX_VOLTAGE_1_8		1980000
+#define MAX_VOLTAGE_3_3		3600000
+
+#define PX30_IO_VSEL			0x180
+#define PX30_IO_VSEL_VCCIO6_SRC		BIT(0)
+#define PX30_IO_VSEL_VCCIO6_SUPPLY_NUM	1
+
+#define RK3288_SOC_CON2			0x24c
+#define RK3288_SOC_CON2_FLASH0		BIT(7)
+#define RK3288_SOC_FLASH_SUPPLY_NUM	2
+
+#define RK3328_SOC_CON4			0x410
+#define RK3328_SOC_CON4_VCCIO2		BIT(7)
+#define RK3328_SOC_VCCIO2_SUPPLY_NUM	1
+
+#define RK3368_SOC_CON15		0x43c
+#define RK3368_SOC_CON15_FLASH0		BIT(14)
+#define RK3368_SOC_FLASH_SUPPLY_NUM	2
+
+#define RK3399_PMUGRF_CON0		0x180
+#define RK3399_PMUGRF_CON0_VSEL		BIT(8)
+#define RK3399_PMUGRF_VSEL_SUPPLY_NUM	9
+
+#define RK3568_PMU_GRF_IO_VSEL0		(0x0140)
+#define RK3568_PMU_GRF_IO_VSEL1		(0x0144)
+#define RK3568_PMU_GRF_IO_VSEL2		(0x0148)
+
+struct rockchip_iodomain;
+
+struct rockchip_iodomain_supply {
+	struct rockchip_iodomain *iod;
+	struct regulator *reg;
+	struct notifier_block nb;
+	int idx;
+};
+
+struct rockchip_iodomain_soc_data {
+	int grf_offset;
+	const char *supply_names[MAX_SUPPLIES];
+	void (*init)(struct rockchip_iodomain *iod);
+	int (*write)(struct rockchip_iodomain_supply *supply, int uV);
+};
+
+struct rockchip_iodomain {
+	struct device *dev;
+	struct regmap *grf;
+	const struct rockchip_iodomain_soc_data *soc_data;
+	struct rockchip_iodomain_supply supplies[MAX_SUPPLIES];
+	int (*write)(struct rockchip_iodomain_supply *supply, int uV);
+};
+
+static int rk3568_iodomain_write(struct rockchip_iodomain_supply *supply, int uV)
+{
+	struct rockchip_iodomain *iod = supply->iod;
+	u32 is_3v3 = uV > MAX_VOLTAGE_1_8;
+	u32 val0, val1;
+	int b;
+
+	switch (supply->idx) {
+	case 0: /* pmuio1 */
+		break;
+	case 1: /* pmuio2 */
+		b = supply->idx;
+		val0 = BIT(16 + b) | (is_3v3 ? 0 : BIT(b));
+		b = supply->idx + 4;
+		val1 = BIT(16 + b) | (is_3v3 ? BIT(b) : 0);
+
+		regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL2, val0);
+		regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL2, val1);
+		break;
+	case 3: /* vccio2 */
+		break;
+	case 2: /* vccio1 */
+	case 4: /* vccio3 */
+	case 5: /* vccio4 */
+	case 6: /* vccio5 */
+	case 7: /* vccio6 */
+	case 8: /* vccio7 */
+		b = supply->idx - 1;
+		val0 = BIT(16 + b) | (is_3v3 ? 0 : BIT(b));
+		val1 = BIT(16 + b) | (is_3v3 ? BIT(b) : 0);
+
+		regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL0, val0);
+		regmap_write(iod->grf, RK3568_PMU_GRF_IO_VSEL1, val1);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rockchip_iodomain_write(struct rockchip_iodomain_supply *supply,
+				   int uV)
+{
+	struct rockchip_iodomain *iod = supply->iod;
+	u32 val;
+	int ret;
+
+	/* set value bit */
+	val = (uV > MAX_VOLTAGE_1_8) ? 0 : 1;
+	val <<= supply->idx;
+
+	/* apply hiword-mask */
+	val |= (BIT(supply->idx) << 16);
+
+	ret = regmap_write(iod->grf, iod->soc_data->grf_offset, val);
+	if (ret)
+		dev_err(iod->dev, "Couldn't write to GRF\n");
+
+	return ret;
+}
+
+static int rockchip_iodomain_notify(struct notifier_block *nb,
+				    unsigned long event,
+				    void *data)
+{
+	struct rockchip_iodomain_supply *supply =
+			container_of(nb, struct rockchip_iodomain_supply, nb);
+	int uV;
+	int ret;
+
+	/*
+	 * According to Rockchip it's important to keep the SoC IO domain
+	 * higher than (or equal to) the external voltage.  That means we need
+	 * to change it before external voltage changes happen in the case
+	 * of an increase.
+	 *
+	 * Note that in the "pre" change we pick the max possible voltage that
+	 * the regulator might end up at (the client requests a range and we
+	 * don't know for certain the exact voltage).  Right now we rely on the
+	 * slop in MAX_VOLTAGE_1_8 and MAX_VOLTAGE_3_3 to save us if clients
+	 * request something like a max of 3.6V when they really want 3.3V.
+	 * We could attempt to come up with better rules if this fails.
+	 */
+	if (event & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
+		struct pre_voltage_change_data *pvc_data = data;
+
+		uV = max_t(unsigned long, pvc_data->old_uV, pvc_data->max_uV);
+	} else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
+			    REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
+		uV = (unsigned long)data;
+	} else {
+		return NOTIFY_OK;
+	}
+
+	dev_dbg(supply->iod->dev, "Setting to %d\n", uV);
+
+	if (uV > MAX_VOLTAGE_3_3) {
+		dev_err(supply->iod->dev, "Voltage too high: %d\n", uV);
+
+		if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
+			return NOTIFY_BAD;
+	}
+
+	ret = supply->iod->write(supply, uV);
+	if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
+		return NOTIFY_BAD;
+
+	dev_dbg(supply->iod->dev, "Setting to %d done\n", uV);
+	return NOTIFY_OK;
+}
+
+static void px30_iodomain_init(struct rockchip_iodomain *iod)
+{
+	int ret;
+	u32 val;
+
+	/* if no VCCIO6 supply we should leave things alone */
+	if (!iod->supplies[PX30_IO_VSEL_VCCIO6_SUPPLY_NUM].reg)
+		return;
+
+	/*
+	 * set vccio6 iodomain to also use this framework
+	 * instead of a special gpio.
+	 */
+	val = PX30_IO_VSEL_VCCIO6_SRC | (PX30_IO_VSEL_VCCIO6_SRC << 16);
+	ret = regmap_write(iod->grf, PX30_IO_VSEL, val);
+	if (ret < 0)
+		dev_warn(iod->dev, "couldn't update vccio6 ctrl\n");
+}
+
+static void rk3288_iodomain_init(struct rockchip_iodomain *iod)
+{
+	int ret;
+	u32 val;
+
+	/* if no flash supply we should leave things alone */
+	if (!iod->supplies[RK3288_SOC_FLASH_SUPPLY_NUM].reg)
+		return;
+
+	/*
+	 * set flash0 iodomain to also use this framework
+	 * instead of a special gpio.
+	 */
+	val = RK3288_SOC_CON2_FLASH0 | (RK3288_SOC_CON2_FLASH0 << 16);
+	ret = regmap_write(iod->grf, RK3288_SOC_CON2, val);
+	if (ret < 0)
+		dev_warn(iod->dev, "couldn't update flash0 ctrl\n");
+}
+
+static void rk3328_iodomain_init(struct rockchip_iodomain *iod)
+{
+	int ret;
+	u32 val;
+
+	/* if no vccio2 supply we should leave things alone */
+	if (!iod->supplies[RK3328_SOC_VCCIO2_SUPPLY_NUM].reg)
+		return;
+
+	/*
+	 * set vccio2 iodomain to also use this framework
+	 * instead of a special gpio.
+	 */
+	val = RK3328_SOC_CON4_VCCIO2 | (RK3328_SOC_CON4_VCCIO2 << 16);
+	ret = regmap_write(iod->grf, RK3328_SOC_CON4, val);
+	if (ret < 0)
+		dev_warn(iod->dev, "couldn't update vccio2 vsel ctrl\n");
+}
+
+static void rk3368_iodomain_init(struct rockchip_iodomain *iod)
+{
+	int ret;
+	u32 val;
+
+	/* if no flash supply we should leave things alone */
+	if (!iod->supplies[RK3368_SOC_FLASH_SUPPLY_NUM].reg)
+		return;
+
+	/*
+	 * set flash0 iodomain to also use this framework
+	 * instead of a special gpio.
+	 */
+	val = RK3368_SOC_CON15_FLASH0 | (RK3368_SOC_CON15_FLASH0 << 16);
+	ret = regmap_write(iod->grf, RK3368_SOC_CON15, val);
+	if (ret < 0)
+		dev_warn(iod->dev, "couldn't update flash0 ctrl\n");
+}
+
+static void rk3399_pmu_iodomain_init(struct rockchip_iodomain *iod)
+{
+	int ret;
+	u32 val;
+
+	/* if no pmu io supply we should leave things alone */
+	if (!iod->supplies[RK3399_PMUGRF_VSEL_SUPPLY_NUM].reg)
+		return;
+
+	/*
+	 * set pmu io iodomain to also use this framework
+	 * instead of a special gpio.
+	 */
+	val = RK3399_PMUGRF_CON0_VSEL | (RK3399_PMUGRF_CON0_VSEL << 16);
+	ret = regmap_write(iod->grf, RK3399_PMUGRF_CON0, val);
+	if (ret < 0)
+		dev_warn(iod->dev, "couldn't update pmu io iodomain ctrl\n");
+}
+
+static const struct rockchip_iodomain_soc_data soc_data_px30 = {
+	.grf_offset = 0x180,
+	.supply_names = {
+		NULL,
+		"vccio6",
+		"vccio1",
+		"vccio2",
+		"vccio3",
+		"vccio4",
+		"vccio5",
+		"vccio-oscgpi",
+	},
+	.init = px30_iodomain_init,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_px30_pmu = {
+	.grf_offset = 0x100,
+	.supply_names = {
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		"pmuio1",
+		"pmuio2",
+	},
+};
+
+/*
+ * On the rk3188 the io-domains are handled by a shared register with the
+ * lower 8 bits being still being continuing drive-strength settings.
+ */
+static const struct rockchip_iodomain_soc_data soc_data_rk3188 = {
+	.grf_offset = 0x104,
+	.supply_names = {
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		"ap0",
+		"ap1",
+		"cif",
+		"flash",
+		"vccio0",
+		"vccio1",
+		"lcdc0",
+		"lcdc1",
+	},
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3228 = {
+	.grf_offset = 0x418,
+	.supply_names = {
+		"vccio1",
+		"vccio2",
+		"vccio3",
+		"vccio4",
+	},
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3288 = {
+	.grf_offset = 0x380,
+	.supply_names = {
+		"lcdc",		/* LCDC_VDD */
+		"dvp",		/* DVPIO_VDD */
+		"flash0",	/* FLASH0_VDD (emmc) */
+		"flash1",	/* FLASH1_VDD (sdio1) */
+		"wifi",		/* APIO3_VDD  (sdio0) */
+		"bb",		/* APIO5_VDD */
+		"audio",	/* APIO4_VDD */
+		"sdcard",	/* SDMMC0_VDD (sdmmc) */
+		"gpio30",	/* APIO1_VDD */
+		"gpio1830",	/* APIO2_VDD */
+	},
+	.init = rk3288_iodomain_init,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3328 = {
+	.grf_offset = 0x410,
+	.supply_names = {
+		"vccio1",
+		"vccio2",
+		"vccio3",
+		"vccio4",
+		"vccio5",
+		"vccio6",
+		"pmuio",
+	},
+	.init = rk3328_iodomain_init,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3368 = {
+	.grf_offset = 0x900,
+	.supply_names = {
+		NULL,		/* reserved */
+		"dvp",		/* DVPIO_VDD */
+		"flash0",	/* FLASH0_VDD (emmc) */
+		"wifi",		/* APIO2_VDD (sdio0) */
+		NULL,
+		"audio",	/* APIO3_VDD */
+		"sdcard",	/* SDMMC0_VDD (sdmmc) */
+		"gpio30",	/* APIO1_VDD */
+		"gpio1830",	/* APIO4_VDD (gpujtag) */
+	},
+	.init = rk3368_iodomain_init,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3368_pmu = {
+	.grf_offset = 0x100,
+	.supply_names = {
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		"pmu",	        /*PMU IO domain*/
+		"vop",	        /*LCDC IO domain*/
+	},
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3399 = {
+	.grf_offset = 0xe640,
+	.supply_names = {
+		"bt656",		/* APIO2_VDD */
+		"audio",		/* APIO5_VDD */
+		"sdmmc",		/* SDMMC0_VDD */
+		"gpio1830",		/* APIO4_VDD */
+	},
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3399_pmu = {
+	.grf_offset = 0x180,
+	.supply_names = {
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		"pmu1830",		/* PMUIO2_VDD */
+	},
+	.init = rk3399_pmu_iodomain_init,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3568_pmu = {
+	.grf_offset = 0x140,
+	.supply_names = {
+		"pmuio1",
+		"pmuio2",
+		"vccio1",
+		"vccio2",
+		"vccio3",
+		"vccio4",
+		"vccio5",
+		"vccio6",
+		"vccio7",
+	},
+	.write = rk3568_iodomain_write,
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rv1108 = {
+	.grf_offset = 0x404,
+	.supply_names = {
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		"vccio1",
+		"vccio2",
+		"vccio3",
+		"vccio5",
+		"vccio6",
+	},
+
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rv1108_pmu = {
+	.grf_offset = 0x104,
+	.supply_names = {
+		"pmu",
+	},
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rv1126_pmu = {
+	.grf_offset = 0x140,
+	.supply_names = {
+		NULL,
+		"vccio1",
+		"vccio2",
+		"vccio3",
+		"vccio4",
+		"vccio5",
+		"vccio6",
+		"vccio7",
+		"pmuio0",
+		"pmuio1",
+	},
+};
+
+static const struct of_device_id rockchip_iodomain_match[] = {
+	{
+		.compatible = "rockchip,px30-io-voltage-domain",
+		.data = (void *)&soc_data_px30
+	},
+	{
+		.compatible = "rockchip,px30-pmu-io-voltage-domain",
+		.data = (void *)&soc_data_px30_pmu
+	},
+	{
+		.compatible = "rockchip,rk3188-io-voltage-domain",
+		.data = &soc_data_rk3188
+	},
+	{
+		.compatible = "rockchip,rk3228-io-voltage-domain",
+		.data = &soc_data_rk3228
+	},
+	{
+		.compatible = "rockchip,rk3288-io-voltage-domain",
+		.data = &soc_data_rk3288
+	},
+	{
+		.compatible = "rockchip,rk3328-io-voltage-domain",
+		.data = &soc_data_rk3328
+	},
+	{
+		.compatible = "rockchip,rk3368-io-voltage-domain",
+		.data = &soc_data_rk3368
+	},
+	{
+		.compatible = "rockchip,rk3368-pmu-io-voltage-domain",
+		.data = &soc_data_rk3368_pmu
+	},
+	{
+		.compatible = "rockchip,rk3399-io-voltage-domain",
+		.data = &soc_data_rk3399
+	},
+	{
+		.compatible = "rockchip,rk3399-pmu-io-voltage-domain",
+		.data = &soc_data_rk3399_pmu
+	},
+	{
+		.compatible = "rockchip,rk3568-pmu-io-voltage-domain",
+		.data = &soc_data_rk3568_pmu
+	},
+	{
+		.compatible = "rockchip,rv1108-io-voltage-domain",
+		.data = &soc_data_rv1108
+	},
+	{
+		.compatible = "rockchip,rv1108-pmu-io-voltage-domain",
+		.data = &soc_data_rv1108_pmu
+	},
+	{
+		.compatible = "rockchip,rv1126-pmu-io-voltage-domain",
+		.data = &soc_data_rv1126_pmu
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_iodomain_match);
+
+static int rockchip_iodomain_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct rockchip_iodomain *iod;
+	struct device *parent;
+	int i, ret = 0;
+
+	if (!np)
+		return -ENODEV;
+
+	iod = devm_kzalloc(&pdev->dev, sizeof(*iod), GFP_KERNEL);
+	if (!iod)
+		return -ENOMEM;
+
+	iod->dev = &pdev->dev;
+	platform_set_drvdata(pdev, iod);
+
+	match = of_match_node(rockchip_iodomain_match, np);
+	iod->soc_data = match->data;
+
+	if (iod->soc_data->write)
+		iod->write = iod->soc_data->write;
+	else
+		iod->write = rockchip_iodomain_write;
+
+	parent = pdev->dev.parent;
+	if (parent && parent->of_node) {
+		iod->grf = syscon_node_to_regmap(parent->of_node);
+	} else {
+		dev_dbg(&pdev->dev, "falling back to old binding\n");
+		iod->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	}
+
+	if (IS_ERR(iod->grf)) {
+		dev_err(&pdev->dev, "couldn't find grf regmap\n");
+		return PTR_ERR(iod->grf);
+	}
+
+	for (i = 0; i < MAX_SUPPLIES; i++) {
+		const char *supply_name = iod->soc_data->supply_names[i];
+		struct rockchip_iodomain_supply *supply = &iod->supplies[i];
+		struct regulator *reg;
+		int uV;
+
+		if (!supply_name)
+			continue;
+
+		reg = devm_regulator_get_optional(iod->dev, supply_name);
+		if (IS_ERR(reg)) {
+			ret = PTR_ERR(reg);
+
+			/* If a supply wasn't specified, that's OK */
+			if (ret == -ENODEV)
+				continue;
+			else if (ret != -EPROBE_DEFER)
+				dev_err(iod->dev, "couldn't get regulator %s\n",
+					supply_name);
+			goto unreg_notify;
+		}
+
+		/* set initial correct value */
+		uV = regulator_get_voltage(reg);
+
+		/* must be a regulator we can get the voltage of */
+		if (uV < 0) {
+			dev_err(iod->dev, "Can't determine voltage: %s\n",
+				supply_name);
+			ret = uV;
+			goto unreg_notify;
+		}
+
+		if (uV > MAX_VOLTAGE_3_3) {
+			dev_crit(iod->dev,
+				 "%d uV is too high. May damage SoC!\n",
+				 uV);
+			ret = -EINVAL;
+			goto unreg_notify;
+		}
+
+		/* setup our supply */
+		supply->idx = i;
+		supply->iod = iod;
+		supply->reg = reg;
+		supply->nb.notifier_call = rockchip_iodomain_notify;
+
+		ret = iod->write(supply, uV);
+		if (ret) {
+			supply->reg = NULL;
+			goto unreg_notify;
+		}
+
+		/* register regulator notifier */
+		ret = regulator_register_notifier(reg, &supply->nb);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"regulator notifier request failed\n");
+			supply->reg = NULL;
+			goto unreg_notify;
+		}
+	}
+
+	if (iod->soc_data->init)
+		iod->soc_data->init(iod);
+
+	return 0;
+
+unreg_notify:
+	for (i = MAX_SUPPLIES - 1; i >= 0; i--) {
+		struct rockchip_iodomain_supply *io_supply = &iod->supplies[i];
+
+		if (io_supply->reg)
+			regulator_unregister_notifier(io_supply->reg,
+						      &io_supply->nb);
+	}
+
+	return ret;
+}
+
+static int rockchip_iodomain_remove(struct platform_device *pdev)
+{
+	struct rockchip_iodomain *iod = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = MAX_SUPPLIES - 1; i >= 0; i--) {
+		struct rockchip_iodomain_supply *io_supply = &iod->supplies[i];
+
+		if (io_supply->reg)
+			regulator_unregister_notifier(io_supply->reg,
+						      &io_supply->nb);
+	}
+
+	return 0;
+}
+
+static struct platform_driver rockchip_iodomain_driver = {
+	.probe   = rockchip_iodomain_probe,
+	.remove  = rockchip_iodomain_remove,
+	.driver  = {
+		.name  = "rockchip-iodomain",
+		.of_match_table = rockchip_iodomain_match,
+	},
+};
+
+module_platform_driver(rockchip_iodomain_driver);
+
+MODULE_DESCRIPTION("Rockchip IO-domain driver");
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_AUTHOR("Doug Anderson <dianders@chromium.org>");
+MODULE_LICENSE("GPL v2");