Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 754 insertions, 0 deletions

diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
new file mode 100644
index 000000000..6a7f7df1e
--- /dev/null
+++ b/drivers/spi/spi-cadence.c
@@ -0,0 +1,754 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Cadence SPI controller driver (master mode only)
+ *
+ * Copyright (C) 2008 - 2014 Xilinx, Inc.
+ *
+ * based on Blackfin On-Chip SPI Driver (spi_bfin5xx.c)
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+
+/* Name of this driver */
+#define CDNS_SPI_NAME		"cdns-spi"
+
+/* Register offset definitions */
+#define CDNS_SPI_CR	0x00 /* Configuration  Register, RW */
+#define CDNS_SPI_ISR	0x04 /* Interrupt Status Register, RO */
+#define CDNS_SPI_IER	0x08 /* Interrupt Enable Register, WO */
+#define CDNS_SPI_IDR	0x0c /* Interrupt Disable Register, WO */
+#define CDNS_SPI_IMR	0x10 /* Interrupt Enabled Mask Register, RO */
+#define CDNS_SPI_ER	0x14 /* Enable/Disable Register, RW */
+#define CDNS_SPI_DR	0x18 /* Delay Register, RW */
+#define CDNS_SPI_TXD	0x1C /* Data Transmit Register, WO */
+#define CDNS_SPI_RXD	0x20 /* Data Receive Register, RO */
+#define CDNS_SPI_SICR	0x24 /* Slave Idle Count Register, RW */
+#define CDNS_SPI_THLD	0x28 /* Transmit FIFO Watermark Register,RW */
+
+#define SPI_AUTOSUSPEND_TIMEOUT		3000
+/*
+ * SPI Configuration Register bit Masks
+ *
+ * This register contains various control bits that affect the operation
+ * of the SPI controller
+ */
+#define CDNS_SPI_CR_MANSTRT	0x00010000 /* Manual TX Start */
+#define CDNS_SPI_CR_CPHA		0x00000004 /* Clock Phase Control */
+#define CDNS_SPI_CR_CPOL		0x00000002 /* Clock Polarity Control */
+#define CDNS_SPI_CR_SSCTRL		0x00003C00 /* Slave Select Mask */
+#define CDNS_SPI_CR_PERI_SEL	0x00000200 /* Peripheral Select Decode */
+#define CDNS_SPI_CR_BAUD_DIV	0x00000038 /* Baud Rate Divisor Mask */
+#define CDNS_SPI_CR_MSTREN		0x00000001 /* Master Enable Mask */
+#define CDNS_SPI_CR_MANSTRTEN	0x00008000 /* Manual TX Enable Mask */
+#define CDNS_SPI_CR_SSFORCE	0x00004000 /* Manual SS Enable Mask */
+#define CDNS_SPI_CR_BAUD_DIV_4	0x00000008 /* Default Baud Div Mask */
+#define CDNS_SPI_CR_DEFAULT	(CDNS_SPI_CR_MSTREN | \
+					CDNS_SPI_CR_SSCTRL | \
+					CDNS_SPI_CR_SSFORCE | \
+					CDNS_SPI_CR_BAUD_DIV_4)
+
+/*
+ * SPI Configuration Register - Baud rate and slave select
+ *
+ * These are the values used in the calculation of baud rate divisor and
+ * setting the slave select.
+ */
+
+#define CDNS_SPI_BAUD_DIV_MAX		7 /* Baud rate divisor maximum */
+#define CDNS_SPI_BAUD_DIV_MIN		1 /* Baud rate divisor minimum */
+#define CDNS_SPI_BAUD_DIV_SHIFT		3 /* Baud rate divisor shift in CR */
+#define CDNS_SPI_SS_SHIFT		10 /* Slave Select field shift in CR */
+#define CDNS_SPI_SS0			0x1 /* Slave Select zero */
+#define CDNS_SPI_NOSS			0xF /* No Slave select */
+
+/*
+ * SPI Interrupt Registers bit Masks
+ *
+ * All the four interrupt registers (Status/Mask/Enable/Disable) have the same
+ * bit definitions.
+ */
+#define CDNS_SPI_IXR_TXOW	0x00000004 /* SPI TX FIFO Overwater */
+#define CDNS_SPI_IXR_MODF	0x00000002 /* SPI Mode Fault */
+#define CDNS_SPI_IXR_RXNEMTY 0x00000010 /* SPI RX FIFO Not Empty */
+#define CDNS_SPI_IXR_DEFAULT	(CDNS_SPI_IXR_TXOW | \
+					CDNS_SPI_IXR_MODF)
+#define CDNS_SPI_IXR_TXFULL	0x00000008 /* SPI TX Full */
+#define CDNS_SPI_IXR_ALL	0x0000007F /* SPI all interrupts */
+
+/*
+ * SPI Enable Register bit Masks
+ *
+ * This register is used to enable or disable the SPI controller
+ */
+#define CDNS_SPI_ER_ENABLE	0x00000001 /* SPI Enable Bit Mask */
+#define CDNS_SPI_ER_DISABLE	0x0 /* SPI Disable Bit Mask */
+
+/* Default number of chip select lines */
+#define CDNS_SPI_DEFAULT_NUM_CS		4
+
+/**
+ * struct cdns_spi - This definition defines spi driver instance
+ * @regs:		Virtual address of the SPI controller registers
+ * @ref_clk:		Pointer to the peripheral clock
+ * @pclk:		Pointer to the APB clock
+ * @speed_hz:		Current SPI bus clock speed in Hz
+ * @txbuf:		Pointer	to the TX buffer
+ * @rxbuf:		Pointer to the RX buffer
+ * @tx_bytes:		Number of bytes left to transfer
+ * @rx_bytes:		Number of bytes requested
+ * @dev_busy:		Device busy flag
+ * @is_decoded_cs:	Flag for decoder property set or not
+ * @tx_fifo_depth:	Depth of the TX FIFO
+ */
+struct cdns_spi {
+	void __iomem *regs;
+	struct clk *ref_clk;
+	struct clk *pclk;
+	unsigned int clk_rate;
+	u32 speed_hz;
+	const u8 *txbuf;
+	u8 *rxbuf;
+	int tx_bytes;
+	int rx_bytes;
+	u8 dev_busy;
+	u32 is_decoded_cs;
+	unsigned int tx_fifo_depth;
+};
+
+/* Macros for the SPI controller read/write */
+static inline u32 cdns_spi_read(struct cdns_spi *xspi, u32 offset)
+{
+	return readl_relaxed(xspi->regs + offset);
+}
+
+static inline void cdns_spi_write(struct cdns_spi *xspi, u32 offset, u32 val)
+{
+	writel_relaxed(val, xspi->regs + offset);
+}
+
+/**
+ * cdns_spi_init_hw - Initialize the hardware and configure the SPI controller
+ * @xspi:	Pointer to the cdns_spi structure
+ *
+ * On reset the SPI controller is configured to be in master mode, baud rate
+ * divisor is set to 4, threshold value for TX FIFO not full interrupt is set
+ * to 1 and size of the word to be transferred as 8 bit.
+ * This function initializes the SPI controller to disable and clear all the
+ * interrupts, enable manual slave select and manual start, deselect all the
+ * chip select lines, and enable the SPI controller.
+ */
+static void cdns_spi_init_hw(struct cdns_spi *xspi)
+{
+	u32 ctrl_reg = CDNS_SPI_CR_DEFAULT;
+
+	if (xspi->is_decoded_cs)
+		ctrl_reg |= CDNS_SPI_CR_PERI_SEL;
+
+	cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
+	cdns_spi_write(xspi, CDNS_SPI_IDR, CDNS_SPI_IXR_ALL);
+
+	/* Clear the RX FIFO */
+	while (cdns_spi_read(xspi, CDNS_SPI_ISR) & CDNS_SPI_IXR_RXNEMTY)
+		cdns_spi_read(xspi, CDNS_SPI_RXD);
+
+	cdns_spi_write(xspi, CDNS_SPI_ISR, CDNS_SPI_IXR_ALL);
+	cdns_spi_write(xspi, CDNS_SPI_CR, ctrl_reg);
+	cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_ENABLE);
+}
+
+/**
+ * cdns_spi_chipselect - Select or deselect the chip select line
+ * @spi:	Pointer to the spi_device structure
+ * @is_high:	Select(0) or deselect (1) the chip select line
+ */
+static void cdns_spi_chipselect(struct spi_device *spi, bool is_high)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+	u32 ctrl_reg;
+
+	ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);
+
+	if (is_high) {
+		/* Deselect the slave */
+		ctrl_reg |= CDNS_SPI_CR_SSCTRL;
+	} else {
+		/* Select the slave */
+		ctrl_reg &= ~CDNS_SPI_CR_SSCTRL;
+		if (!(xspi->is_decoded_cs))
+			ctrl_reg |= ((~(CDNS_SPI_SS0 << spi->chip_select)) <<
+				     CDNS_SPI_SS_SHIFT) &
+				     CDNS_SPI_CR_SSCTRL;
+		else
+			ctrl_reg |= (spi->chip_select << CDNS_SPI_SS_SHIFT) &
+				     CDNS_SPI_CR_SSCTRL;
+	}
+
+	cdns_spi_write(xspi, CDNS_SPI_CR, ctrl_reg);
+}
+
+/**
+ * cdns_spi_config_clock_mode - Sets clock polarity and phase
+ * @spi:	Pointer to the spi_device structure
+ *
+ * Sets the requested clock polarity and phase.
+ */
+static void cdns_spi_config_clock_mode(struct spi_device *spi)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+	u32 ctrl_reg, new_ctrl_reg;
+
+	new_ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);
+	ctrl_reg = new_ctrl_reg;
+
+	/* Set the SPI clock phase and clock polarity */
+	new_ctrl_reg &= ~(CDNS_SPI_CR_CPHA | CDNS_SPI_CR_CPOL);
+	if (spi->mode & SPI_CPHA)
+		new_ctrl_reg |= CDNS_SPI_CR_CPHA;
+	if (spi->mode & SPI_CPOL)
+		new_ctrl_reg |= CDNS_SPI_CR_CPOL;
+
+	if (new_ctrl_reg != ctrl_reg) {
+		/*
+		 * Just writing the CR register does not seem to apply the clock
+		 * setting changes. This is problematic when changing the clock
+		 * polarity as it will cause the SPI slave to see spurious clock
+		 * transitions. To workaround the issue toggle the ER register.
+		 */
+		cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
+		cdns_spi_write(xspi, CDNS_SPI_CR, new_ctrl_reg);
+		cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_ENABLE);
+	}
+}
+
+/**
+ * cdns_spi_config_clock_freq - Sets clock frequency
+ * @spi:	Pointer to the spi_device structure
+ * @transfer:	Pointer to the spi_transfer structure which provides
+ *		information about next transfer setup parameters
+ *
+ * Sets the requested clock frequency.
+ * Note: If the requested frequency is not an exact match with what can be
+ * obtained using the prescalar value the driver sets the clock frequency which
+ * is lower than the requested frequency (maximum lower) for the transfer. If
+ * the requested frequency is higher or lower than that is supported by the SPI
+ * controller the driver will set the highest or lowest frequency supported by
+ * controller.
+ */
+static void cdns_spi_config_clock_freq(struct spi_device *spi,
+				       struct spi_transfer *transfer)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+	u32 ctrl_reg, baud_rate_val;
+	unsigned long frequency;
+
+	frequency = xspi->clk_rate;
+
+	ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);
+
+	/* Set the clock frequency */
+	if (xspi->speed_hz != transfer->speed_hz) {
+		/* first valid value is 1 */
+		baud_rate_val = CDNS_SPI_BAUD_DIV_MIN;
+		while ((baud_rate_val < CDNS_SPI_BAUD_DIV_MAX) &&
+		       (frequency / (2 << baud_rate_val)) > transfer->speed_hz)
+			baud_rate_val++;
+
+		ctrl_reg &= ~CDNS_SPI_CR_BAUD_DIV;
+		ctrl_reg |= baud_rate_val << CDNS_SPI_BAUD_DIV_SHIFT;
+
+		xspi->speed_hz = frequency / (2 << baud_rate_val);
+	}
+	cdns_spi_write(xspi, CDNS_SPI_CR, ctrl_reg);
+}
+
+/**
+ * cdns_spi_setup_transfer - Configure SPI controller for specified transfer
+ * @spi:	Pointer to the spi_device structure
+ * @transfer:	Pointer to the spi_transfer structure which provides
+ *		information about next transfer setup parameters
+ *
+ * Sets the operational mode of SPI controller for the next SPI transfer and
+ * sets the requested clock frequency.
+ *
+ * Return:	Always 0
+ */
+static int cdns_spi_setup_transfer(struct spi_device *spi,
+				   struct spi_transfer *transfer)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(spi->master);
+
+	cdns_spi_config_clock_freq(spi, transfer);
+
+	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u clock speed\n",
+		__func__, spi->mode, spi->bits_per_word,
+		xspi->speed_hz);
+
+	return 0;
+}
+
+/**
+ * cdns_spi_fill_tx_fifo - Fills the TX FIFO with as many bytes as possible
+ * @xspi:	Pointer to the cdns_spi structure
+ */
+static void cdns_spi_fill_tx_fifo(struct cdns_spi *xspi)
+{
+	unsigned long trans_cnt = 0;
+
+	while ((trans_cnt < xspi->tx_fifo_depth) &&
+	       (xspi->tx_bytes > 0)) {
+
+		/* When xspi in busy condition, bytes may send failed,
+		 * then spi control did't work thoroughly, add one byte delay
+		 */
+		if (cdns_spi_read(xspi, CDNS_SPI_ISR) &
+		    CDNS_SPI_IXR_TXFULL)
+			udelay(10);
+
+		if (xspi->txbuf)
+			cdns_spi_write(xspi, CDNS_SPI_TXD, *xspi->txbuf++);
+		else
+			cdns_spi_write(xspi, CDNS_SPI_TXD, 0);
+
+		xspi->tx_bytes--;
+		trans_cnt++;
+	}
+}
+
+/**
+ * cdns_spi_irq - Interrupt service routine of the SPI controller
+ * @irq:	IRQ number
+ * @dev_id:	Pointer to the xspi structure
+ *
+ * This function handles TX empty and Mode Fault interrupts only.
+ * On TX empty interrupt this function reads the received data from RX FIFO and
+ * fills the TX FIFO if there is any data remaining to be transferred.
+ * On Mode Fault interrupt this function indicates that transfer is completed,
+ * the SPI subsystem will identify the error as the remaining bytes to be
+ * transferred is non-zero.
+ *
+ * Return:	IRQ_HANDLED when handled; IRQ_NONE otherwise.
+ */
+static irqreturn_t cdns_spi_irq(int irq, void *dev_id)
+{
+	struct spi_master *master = dev_id;
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+	irqreturn_t status;
+	u32 intr_status;
+
+	status = IRQ_NONE;
+	intr_status = cdns_spi_read(xspi, CDNS_SPI_ISR);
+	cdns_spi_write(xspi, CDNS_SPI_ISR, intr_status);
+
+	if (intr_status & CDNS_SPI_IXR_MODF) {
+		/* Indicate that transfer is completed, the SPI subsystem will
+		 * identify the error as the remaining bytes to be
+		 * transferred is non-zero
+		 */
+		cdns_spi_write(xspi, CDNS_SPI_IDR, CDNS_SPI_IXR_DEFAULT);
+		spi_finalize_current_transfer(master);
+		status = IRQ_HANDLED;
+	} else if (intr_status & CDNS_SPI_IXR_TXOW) {
+		unsigned long trans_cnt;
+
+		trans_cnt = xspi->rx_bytes - xspi->tx_bytes;
+
+		/* Read out the data from the RX FIFO */
+		while (trans_cnt) {
+			u8 data;
+
+			data = cdns_spi_read(xspi, CDNS_SPI_RXD);
+			if (xspi->rxbuf)
+				*xspi->rxbuf++ = data;
+
+			xspi->rx_bytes--;
+			trans_cnt--;
+		}
+
+		if (xspi->tx_bytes) {
+			/* There is more data to send */
+			cdns_spi_fill_tx_fifo(xspi);
+		} else {
+			/* Transfer is completed */
+			cdns_spi_write(xspi, CDNS_SPI_IDR,
+				       CDNS_SPI_IXR_DEFAULT);
+			spi_finalize_current_transfer(master);
+		}
+		status = IRQ_HANDLED;
+	}
+
+	return status;
+}
+
+static int cdns_prepare_message(struct spi_master *master,
+				struct spi_message *msg)
+{
+	cdns_spi_config_clock_mode(msg->spi);
+	return 0;
+}
+
+/**
+ * cdns_transfer_one - Initiates the SPI transfer
+ * @master:	Pointer to spi_master structure
+ * @spi:	Pointer to the spi_device structure
+ * @transfer:	Pointer to the spi_transfer structure which provides
+ *		information about next transfer parameters
+ *
+ * This function fills the TX FIFO, starts the SPI transfer and
+ * returns a positive transfer count so that core will wait for completion.
+ *
+ * Return:	Number of bytes transferred in the last transfer
+ */
+static int cdns_transfer_one(struct spi_master *master,
+			     struct spi_device *spi,
+			     struct spi_transfer *transfer)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+	xspi->txbuf = transfer->tx_buf;
+	xspi->rxbuf = transfer->rx_buf;
+	xspi->tx_bytes = transfer->len;
+	xspi->rx_bytes = transfer->len;
+
+	cdns_spi_setup_transfer(spi, transfer);
+	cdns_spi_fill_tx_fifo(xspi);
+	spi_transfer_delay_exec(transfer);
+
+	cdns_spi_write(xspi, CDNS_SPI_IER, CDNS_SPI_IXR_DEFAULT);
+	return transfer->len;
+}
+
+/**
+ * cdns_prepare_transfer_hardware - Prepares hardware for transfer.
+ * @master:	Pointer to the spi_master structure which provides
+ *		information about the controller.
+ *
+ * This function enables SPI master controller.
+ *
+ * Return:	0 always
+ */
+static int cdns_prepare_transfer_hardware(struct spi_master *master)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+	cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_ENABLE);
+
+	return 0;
+}
+
+/**
+ * cdns_unprepare_transfer_hardware - Relaxes hardware after transfer
+ * @master:	Pointer to the spi_master structure which provides
+ *		information about the controller.
+ *
+ * This function disables the SPI master controller when no slave selected.
+ *
+ * Return:	0 always
+ */
+static int cdns_unprepare_transfer_hardware(struct spi_master *master)
+{
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+	u32 ctrl_reg;
+
+	/* Disable the SPI if slave is deselected */
+	ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);
+	ctrl_reg = (ctrl_reg & CDNS_SPI_CR_SSCTRL) >>  CDNS_SPI_SS_SHIFT;
+	if (ctrl_reg == CDNS_SPI_NOSS)
+		cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
+
+	return 0;
+}
+
+/**
+ * cdns_spi_detect_fifo_depth - Detect the FIFO depth of the hardware
+ * @xspi:	Pointer to the cdns_spi structure
+ *
+ * The depth of the TX FIFO is a synthesis configuration parameter of the SPI
+ * IP. The FIFO threshold register is sized so that its maximum value can be the
+ * FIFO size - 1. This is used to detect the size of the FIFO.
+ */
+static void cdns_spi_detect_fifo_depth(struct cdns_spi *xspi)
+{
+	/* The MSBs will get truncated giving us the size of the FIFO */
+	cdns_spi_write(xspi, CDNS_SPI_THLD, 0xffff);
+	xspi->tx_fifo_depth = cdns_spi_read(xspi, CDNS_SPI_THLD) + 1;
+
+	/* Reset to default */
+	cdns_spi_write(xspi, CDNS_SPI_THLD, 0x1);
+}
+
+/**
+ * cdns_spi_probe - Probe method for the SPI driver
+ * @pdev:	Pointer to the platform_device structure
+ *
+ * This function initializes the driver data structures and the hardware.
+ *
+ * Return:	0 on success and error value on error
+ */
+static int cdns_spi_probe(struct platform_device *pdev)
+{
+	int ret = 0, irq;
+	struct spi_master *master;
+	struct cdns_spi *xspi;
+	u32 num_cs;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(*xspi));
+	if (!master)
+		return -ENOMEM;
+
+	xspi = spi_master_get_devdata(master);
+	master->dev.of_node = pdev->dev.of_node;
+	platform_set_drvdata(pdev, master);
+
+	xspi->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(xspi->regs)) {
+		ret = PTR_ERR(xspi->regs);
+		goto remove_master;
+	}
+
+	xspi->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(xspi->pclk)) {
+		dev_err(&pdev->dev, "pclk clock not found.\n");
+		ret = PTR_ERR(xspi->pclk);
+		goto remove_master;
+	}
+
+	xspi->ref_clk = devm_clk_get(&pdev->dev, "ref_clk");
+	if (IS_ERR(xspi->ref_clk)) {
+		dev_err(&pdev->dev, "ref_clk clock not found.\n");
+		ret = PTR_ERR(xspi->ref_clk);
+		goto remove_master;
+	}
+
+	ret = clk_prepare_enable(xspi->pclk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable APB clock.\n");
+		goto remove_master;
+	}
+
+	ret = clk_prepare_enable(xspi->ref_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable device clock.\n");
+		goto clk_dis_apb;
+	}
+
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
+	if (ret < 0)
+		master->num_chipselect = CDNS_SPI_DEFAULT_NUM_CS;
+	else
+		master->num_chipselect = num_cs;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "is-decoded-cs",
+				   &xspi->is_decoded_cs);
+	if (ret < 0)
+		xspi->is_decoded_cs = 0;
+
+	cdns_spi_detect_fifo_depth(xspi);
+
+	/* SPI controller initializations */
+	cdns_spi_init_hw(xspi);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		ret = -ENXIO;
+		goto clk_dis_all;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, cdns_spi_irq,
+			       0, pdev->name, master);
+	if (ret != 0) {
+		ret = -ENXIO;
+		dev_err(&pdev->dev, "request_irq failed\n");
+		goto clk_dis_all;
+	}
+
+	master->use_gpio_descriptors = true;
+	master->prepare_transfer_hardware = cdns_prepare_transfer_hardware;
+	master->prepare_message = cdns_prepare_message;
+	master->transfer_one = cdns_transfer_one;
+	master->unprepare_transfer_hardware = cdns_unprepare_transfer_hardware;
+	master->set_cs = cdns_spi_chipselect;
+	master->auto_runtime_pm = true;
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
+	xspi->clk_rate = clk_get_rate(xspi->ref_clk);
+	/* Set to default valid value */
+	master->max_speed_hz = xspi->clk_rate / 4;
+	xspi->speed_hz = master->max_speed_hz;
+
+	master->bits_per_word_mask = SPI_BPW_MASK(8);
+
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+
+	ret = spi_register_master(master);
+	if (ret) {
+		dev_err(&pdev->dev, "spi_register_master failed\n");
+		goto clk_dis_all;
+	}
+
+	return ret;
+
+clk_dis_all:
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+	clk_disable_unprepare(xspi->ref_clk);
+clk_dis_apb:
+	clk_disable_unprepare(xspi->pclk);
+remove_master:
+	spi_master_put(master);
+	return ret;
+}
+
+/**
+ * cdns_spi_remove - Remove method for the SPI driver
+ * @pdev:	Pointer to the platform_device structure
+ *
+ * This function is called if a device is physically removed from the system or
+ * if the driver module is being unloaded. It frees all resources allocated to
+ * the device.
+ *
+ * Return:	0 on success and error value on error
+ */
+static int cdns_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+	cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
+
+	clk_disable_unprepare(xspi->ref_clk);
+	clk_disable_unprepare(xspi->pclk);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	spi_unregister_master(master);
+
+	return 0;
+}
+
+/**
+ * cdns_spi_suspend - Suspend method for the SPI driver
+ * @dev:	Address of the platform_device structure
+ *
+ * This function disables the SPI controller and
+ * changes the driver state to "suspend"
+ *
+ * Return:	0 on success and error value on error
+ */
+static int __maybe_unused cdns_spi_suspend(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+
+	return spi_master_suspend(master);
+}
+
+/**
+ * cdns_spi_resume - Resume method for the SPI driver
+ * @dev:	Address of the platform_device structure
+ *
+ * This function changes the driver state to "ready"
+ *
+ * Return:	0 on success and error value on error
+ */
+static int __maybe_unused cdns_spi_resume(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+	cdns_spi_init_hw(xspi);
+	return spi_master_resume(master);
+}
+
+/**
+ * cdns_spi_runtime_resume - Runtime resume method for the SPI driver
+ * @dev:	Address of the platform_device structure
+ *
+ * This function enables the clocks
+ *
+ * Return:	0 on success and error value on error
+ */
+static int __maybe_unused cdns_spi_runtime_resume(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+	int ret;
+
+	ret = clk_prepare_enable(xspi->pclk);
+	if (ret) {
+		dev_err(dev, "Cannot enable APB clock.\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(xspi->ref_clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable device clock.\n");
+		clk_disable_unprepare(xspi->pclk);
+		return ret;
+	}
+	return 0;
+}
+
+/**
+ * cdns_spi_runtime_suspend - Runtime suspend method for the SPI driver
+ * @dev:	Address of the platform_device structure
+ *
+ * This function disables the clocks
+ *
+ * Return:	Always 0
+ */
+static int __maybe_unused cdns_spi_runtime_suspend(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct cdns_spi *xspi = spi_master_get_devdata(master);
+
+	clk_disable_unprepare(xspi->ref_clk);
+	clk_disable_unprepare(xspi->pclk);
+
+	return 0;
+}
+
+static const struct dev_pm_ops cdns_spi_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(cdns_spi_runtime_suspend,
+			   cdns_spi_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(cdns_spi_suspend, cdns_spi_resume)
+};
+
+static const struct of_device_id cdns_spi_of_match[] = {
+	{ .compatible = "xlnx,zynq-spi-r1p6" },
+	{ .compatible = "cdns,spi-r1p6" },
+	{ /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_spi_of_match);
+
+/* cdns_spi_driver - This structure defines the SPI subsystem platform driver */
+static struct platform_driver cdns_spi_driver = {
+	.probe	= cdns_spi_probe,
+	.remove	= cdns_spi_remove,
+	.driver = {
+		.name = CDNS_SPI_NAME,
+		.of_match_table = cdns_spi_of_match,
+		.pm = &cdns_spi_dev_pm_ops,
+	},
+};
+
+module_platform_driver(cdns_spi_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Cadence SPI driver");
+MODULE_LICENSE("GPL");