Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1014 insertions, 0 deletions

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
new file mode 100644
index 000000000..c3bfb6c84
--- /dev/null
+++ b/drivers/spi/spi-dw-core.c
@@ -0,0 +1,1014 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Designware SPI core controller driver (refer pxa2xx_spi.c)
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/preempt.h>
+#include <linux/highmem.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+#include <linux/string.h>
+#include <linux/of.h>
+
+#include "spi-dw.h"
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#endif
+
+/* Slave spi_device related */
+struct dw_spi_chip_data {
+	u32 cr0;
+	u32 rx_sample_dly;	/* RX sample delay */
+};
+
+#ifdef CONFIG_DEBUG_FS
+
+#define DW_SPI_DBGFS_REG(_name, _off)	\
+{					\
+	.name = _name,			\
+	.offset = _off,			\
+}
+
+static const struct debugfs_reg32 dw_spi_dbgfs_regs[] = {
+	DW_SPI_DBGFS_REG("CTRLR0", DW_SPI_CTRLR0),
+	DW_SPI_DBGFS_REG("CTRLR1", DW_SPI_CTRLR1),
+	DW_SPI_DBGFS_REG("SSIENR", DW_SPI_SSIENR),
+	DW_SPI_DBGFS_REG("SER", DW_SPI_SER),
+	DW_SPI_DBGFS_REG("BAUDR", DW_SPI_BAUDR),
+	DW_SPI_DBGFS_REG("TXFTLR", DW_SPI_TXFTLR),
+	DW_SPI_DBGFS_REG("RXFTLR", DW_SPI_RXFTLR),
+	DW_SPI_DBGFS_REG("TXFLR", DW_SPI_TXFLR),
+	DW_SPI_DBGFS_REG("RXFLR", DW_SPI_RXFLR),
+	DW_SPI_DBGFS_REG("SR", DW_SPI_SR),
+	DW_SPI_DBGFS_REG("IMR", DW_SPI_IMR),
+	DW_SPI_DBGFS_REG("ISR", DW_SPI_ISR),
+	DW_SPI_DBGFS_REG("DMACR", DW_SPI_DMACR),
+	DW_SPI_DBGFS_REG("DMATDLR", DW_SPI_DMATDLR),
+	DW_SPI_DBGFS_REG("DMARDLR", DW_SPI_DMARDLR),
+	DW_SPI_DBGFS_REG("RX_SAMPLE_DLY", DW_SPI_RX_SAMPLE_DLY),
+};
+
+static int dw_spi_debugfs_init(struct dw_spi *dws)
+{
+	char name[32];
+
+	snprintf(name, 32, "dw_spi%d", dws->master->bus_num);
+	dws->debugfs = debugfs_create_dir(name, NULL);
+	if (!dws->debugfs)
+		return -ENOMEM;
+
+	dws->regset.regs = dw_spi_dbgfs_regs;
+	dws->regset.nregs = ARRAY_SIZE(dw_spi_dbgfs_regs);
+	dws->regset.base = dws->regs;
+	debugfs_create_regset32("registers", 0400, dws->debugfs, &dws->regset);
+
+	return 0;
+}
+
+static void dw_spi_debugfs_remove(struct dw_spi *dws)
+{
+	debugfs_remove_recursive(dws->debugfs);
+}
+
+#else
+static inline int dw_spi_debugfs_init(struct dw_spi *dws)
+{
+	return 0;
+}
+
+static inline void dw_spi_debugfs_remove(struct dw_spi *dws)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+void dw_spi_set_cs(struct spi_device *spi, bool enable)
+{
+	struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
+	bool cs_high = !!(spi->mode & SPI_CS_HIGH);
+
+	/*
+	 * DW SPI controller demands any native CS being set in order to
+	 * proceed with data transfer. So in order to activate the SPI
+	 * communications we must set a corresponding bit in the Slave
+	 * Enable register no matter whether the SPI core is configured to
+	 * support active-high or active-low CS level.
+	 */
+	if (cs_high == enable)
+		dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
+	else
+		dw_writel(dws, DW_SPI_SER, 0);
+}
+EXPORT_SYMBOL_NS_GPL(dw_spi_set_cs, SPI_DW_CORE);
+
+/* Return the max entries we can fill into tx fifo */
+static inline u32 dw_spi_tx_max(struct dw_spi *dws)
+{
+	u32 tx_room, rxtx_gap;
+
+	tx_room = dws->fifo_len - dw_readl(dws, DW_SPI_TXFLR);
+
+	/*
+	 * Another concern is about the tx/rx mismatch, we
+	 * though to use (dws->fifo_len - rxflr - txflr) as
+	 * one maximum value for tx, but it doesn't cover the
+	 * data which is out of tx/rx fifo and inside the
+	 * shift registers. So a control from sw point of
+	 * view is taken.
+	 */
+	rxtx_gap = dws->fifo_len - (dws->rx_len - dws->tx_len);
+
+	return min3((u32)dws->tx_len, tx_room, rxtx_gap);
+}
+
+/* Return the max entries we should read out of rx fifo */
+static inline u32 dw_spi_rx_max(struct dw_spi *dws)
+{
+	return min_t(u32, dws->rx_len, dw_readl(dws, DW_SPI_RXFLR));
+}
+
+static void dw_writer(struct dw_spi *dws)
+{
+	u32 max = dw_spi_tx_max(dws);
+	u32 txw = 0;
+
+	while (max--) {
+		if (dws->tx) {
+			if (dws->n_bytes == 1)
+				txw = *(u8 *)(dws->tx);
+			else if (dws->n_bytes == 2)
+				txw = *(u16 *)(dws->tx);
+			else
+				txw = *(u32 *)(dws->tx);
+
+			dws->tx += dws->n_bytes;
+		}
+		dw_write_io_reg(dws, DW_SPI_DR, txw);
+		--dws->tx_len;
+	}
+}
+
+static void dw_reader(struct dw_spi *dws)
+{
+	u32 max = dw_spi_rx_max(dws);
+	u32 rxw;
+
+	while (max--) {
+		rxw = dw_read_io_reg(dws, DW_SPI_DR);
+		if (dws->rx) {
+			if (dws->n_bytes == 1)
+				*(u8 *)(dws->rx) = rxw;
+			else if (dws->n_bytes == 2)
+				*(u16 *)(dws->rx) = rxw;
+			else
+				*(u32 *)(dws->rx) = rxw;
+
+			dws->rx += dws->n_bytes;
+		}
+		--dws->rx_len;
+	}
+}
+
+int dw_spi_check_status(struct dw_spi *dws, bool raw)
+{
+	u32 irq_status;
+	int ret = 0;
+
+	if (raw)
+		irq_status = dw_readl(dws, DW_SPI_RISR);
+	else
+		irq_status = dw_readl(dws, DW_SPI_ISR);
+
+	if (irq_status & DW_SPI_INT_RXOI) {
+		dev_err(&dws->master->dev, "RX FIFO overflow detected\n");
+		ret = -EIO;
+	}
+
+	if (irq_status & DW_SPI_INT_RXUI) {
+		dev_err(&dws->master->dev, "RX FIFO underflow detected\n");
+		ret = -EIO;
+	}
+
+	if (irq_status & DW_SPI_INT_TXOI) {
+		dev_err(&dws->master->dev, "TX FIFO overflow detected\n");
+		ret = -EIO;
+	}
+
+	/* Generically handle the erroneous situation */
+	if (ret) {
+		dw_spi_reset_chip(dws);
+		if (dws->master->cur_msg)
+			dws->master->cur_msg->status = ret;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(dw_spi_check_status, SPI_DW_CORE);
+
+static irqreturn_t dw_spi_transfer_handler(struct dw_spi *dws)
+{
+	u16 irq_status = dw_readl(dws, DW_SPI_ISR);
+
+	if (dw_spi_check_status(dws, false)) {
+		spi_finalize_current_transfer(dws->master);
+		return IRQ_HANDLED;
+	}
+
+	/*
+	 * Read data from the Rx FIFO every time we've got a chance executing
+	 * this method. If there is nothing left to receive, terminate the
+	 * procedure. Otherwise adjust the Rx FIFO Threshold level if it's a
+	 * final stage of the transfer. By doing so we'll get the next IRQ
+	 * right when the leftover incoming data is received.
+	 */
+	dw_reader(dws);
+	if (!dws->rx_len) {
+		dw_spi_mask_intr(dws, 0xff);
+		spi_finalize_current_transfer(dws->master);
+	} else if (dws->rx_len <= dw_readl(dws, DW_SPI_RXFTLR)) {
+		dw_writel(dws, DW_SPI_RXFTLR, dws->rx_len - 1);
+	}
+
+	/*
+	 * Send data out if Tx FIFO Empty IRQ is received. The IRQ will be
+	 * disabled after the data transmission is finished so not to
+	 * have the TXE IRQ flood at the final stage of the transfer.
+	 */
+	if (irq_status & DW_SPI_INT_TXEI) {
+		dw_writer(dws);
+		if (!dws->tx_len)
+			dw_spi_mask_intr(dws, DW_SPI_INT_TXEI);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dw_spi_irq(int irq, void *dev_id)
+{
+	struct spi_controller *master = dev_id;
+	struct dw_spi *dws = spi_controller_get_devdata(master);
+	u16 irq_status = dw_readl(dws, DW_SPI_ISR) & DW_SPI_INT_MASK;
+
+	if (!irq_status)
+		return IRQ_NONE;
+
+	if (!master->cur_msg) {
+		dw_spi_mask_intr(dws, 0xff);
+		return IRQ_HANDLED;
+	}
+
+	return dws->transfer_handler(dws);
+}
+
+static u32 dw_spi_prepare_cr0(struct dw_spi *dws, struct spi_device *spi)
+{
+	u32 cr0 = 0;
+
+	if (dw_spi_ip_is(dws, PSSI)) {
+		/* CTRLR0[ 5: 4] Frame Format */
+		cr0 |= FIELD_PREP(DW_PSSI_CTRLR0_FRF_MASK, DW_SPI_CTRLR0_FRF_MOTO_SPI);
+
+		/*
+		 * SPI mode (SCPOL|SCPH)
+		 * CTRLR0[ 6] Serial Clock Phase
+		 * CTRLR0[ 7] Serial Clock Polarity
+		 */
+		if (spi->mode & SPI_CPOL)
+			cr0 |= DW_PSSI_CTRLR0_SCPOL;
+		if (spi->mode & SPI_CPHA)
+			cr0 |= DW_PSSI_CTRLR0_SCPHA;
+
+		/* CTRLR0[11] Shift Register Loop */
+		if (spi->mode & SPI_LOOP)
+			cr0 |= DW_PSSI_CTRLR0_SRL;
+	} else {
+		/* CTRLR0[ 7: 6] Frame Format */
+		cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_FRF_MASK, DW_SPI_CTRLR0_FRF_MOTO_SPI);
+
+		/*
+		 * SPI mode (SCPOL|SCPH)
+		 * CTRLR0[ 8] Serial Clock Phase
+		 * CTRLR0[ 9] Serial Clock Polarity
+		 */
+		if (spi->mode & SPI_CPOL)
+			cr0 |= DW_HSSI_CTRLR0_SCPOL;
+		if (spi->mode & SPI_CPHA)
+			cr0 |= DW_HSSI_CTRLR0_SCPHA;
+
+		/* CTRLR0[13] Shift Register Loop */
+		if (spi->mode & SPI_LOOP)
+			cr0 |= DW_HSSI_CTRLR0_SRL;
+
+		/* CTRLR0[31] MST */
+		if (dw_spi_ver_is_ge(dws, HSSI, 102A))
+			cr0 |= DW_HSSI_CTRLR0_MST;
+	}
+
+	return cr0;
+}
+
+void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
+			  struct dw_spi_cfg *cfg)
+{
+	struct dw_spi_chip_data *chip = spi_get_ctldata(spi);
+	u32 cr0 = chip->cr0;
+	u32 speed_hz;
+	u16 clk_div;
+
+	/* CTRLR0[ 4/3: 0] or CTRLR0[ 20: 16] Data Frame Size */
+	cr0 |= (cfg->dfs - 1) << dws->dfs_offset;
+
+	if (dw_spi_ip_is(dws, PSSI))
+		/* CTRLR0[ 9:8] Transfer Mode */
+		cr0 |= FIELD_PREP(DW_PSSI_CTRLR0_TMOD_MASK, cfg->tmode);
+	else
+		/* CTRLR0[11:10] Transfer Mode */
+		cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_TMOD_MASK, cfg->tmode);
+
+	dw_writel(dws, DW_SPI_CTRLR0, cr0);
+
+	if (cfg->tmode == DW_SPI_CTRLR0_TMOD_EPROMREAD ||
+	    cfg->tmode == DW_SPI_CTRLR0_TMOD_RO)
+		dw_writel(dws, DW_SPI_CTRLR1, cfg->ndf ? cfg->ndf - 1 : 0);
+
+	/* Note DW APB SSI clock divider doesn't support odd numbers */
+	clk_div = (DIV_ROUND_UP(dws->max_freq, cfg->freq) + 1) & 0xfffe;
+	speed_hz = dws->max_freq / clk_div;
+
+	if (dws->current_freq != speed_hz) {
+		dw_spi_set_clk(dws, clk_div);
+		dws->current_freq = speed_hz;
+	}
+
+	/* Update RX sample delay if required */
+	if (dws->cur_rx_sample_dly != chip->rx_sample_dly) {
+		dw_writel(dws, DW_SPI_RX_SAMPLE_DLY, chip->rx_sample_dly);
+		dws->cur_rx_sample_dly = chip->rx_sample_dly;
+	}
+}
+EXPORT_SYMBOL_NS_GPL(dw_spi_update_config, SPI_DW_CORE);
+
+static void dw_spi_irq_setup(struct dw_spi *dws)
+{
+	u16 level;
+	u8 imask;
+
+	/*
+	 * Originally Tx and Rx data lengths match. Rx FIFO Threshold level
+	 * will be adjusted at the final stage of the IRQ-based SPI transfer
+	 * execution so not to lose the leftover of the incoming data.
+	 */
+	level = min_t(unsigned int, dws->fifo_len / 2, dws->tx_len);
+	dw_writel(dws, DW_SPI_TXFTLR, level);
+	dw_writel(dws, DW_SPI_RXFTLR, level - 1);
+
+	dws->transfer_handler = dw_spi_transfer_handler;
+
+	imask = DW_SPI_INT_TXEI | DW_SPI_INT_TXOI |
+		DW_SPI_INT_RXUI | DW_SPI_INT_RXOI | DW_SPI_INT_RXFI;
+	dw_spi_umask_intr(dws, imask);
+}
+
+/*
+ * The iterative procedure of the poll-based transfer is simple: write as much
+ * as possible to the Tx FIFO, wait until the pending to receive data is ready
+ * to be read, read it from the Rx FIFO and check whether the performed
+ * procedure has been successful.
+ *
+ * Note this method the same way as the IRQ-based transfer won't work well for
+ * the SPI devices connected to the controller with native CS due to the
+ * automatic CS assertion/de-assertion.
+ */
+static int dw_spi_poll_transfer(struct dw_spi *dws,
+				struct spi_transfer *transfer)
+{
+	struct spi_delay delay;
+	u16 nbits;
+	int ret;
+
+	delay.unit = SPI_DELAY_UNIT_SCK;
+	nbits = dws->n_bytes * BITS_PER_BYTE;
+
+	do {
+		dw_writer(dws);
+
+		delay.value = nbits * (dws->rx_len - dws->tx_len);
+		spi_delay_exec(&delay, transfer);
+
+		dw_reader(dws);
+
+		ret = dw_spi_check_status(dws, true);
+		if (ret)
+			return ret;
+	} while (dws->rx_len);
+
+	return 0;
+}
+
+static int dw_spi_transfer_one(struct spi_controller *master,
+			       struct spi_device *spi,
+			       struct spi_transfer *transfer)
+{
+	struct dw_spi *dws = spi_controller_get_devdata(master);
+	struct dw_spi_cfg cfg = {
+		.tmode = DW_SPI_CTRLR0_TMOD_TR,
+		.dfs = transfer->bits_per_word,
+		.freq = transfer->speed_hz,
+	};
+	int ret;
+
+	dws->dma_mapped = 0;
+	dws->n_bytes = DIV_ROUND_UP(transfer->bits_per_word, BITS_PER_BYTE);
+	dws->tx = (void *)transfer->tx_buf;
+	dws->tx_len = transfer->len / dws->n_bytes;
+	dws->rx = transfer->rx_buf;
+	dws->rx_len = dws->tx_len;
+
+	/* Ensure the data above is visible for all CPUs */
+	smp_mb();
+
+	dw_spi_enable_chip(dws, 0);
+
+	dw_spi_update_config(dws, spi, &cfg);
+
+	transfer->effective_speed_hz = dws->current_freq;
+
+	/* Check if current transfer is a DMA transaction */
+	if (master->can_dma && master->can_dma(master, spi, transfer))
+		dws->dma_mapped = master->cur_msg_mapped;
+
+	/* For poll mode just disable all interrupts */
+	dw_spi_mask_intr(dws, 0xff);
+
+	if (dws->dma_mapped) {
+		ret = dws->dma_ops->dma_setup(dws, transfer);
+		if (ret)
+			return ret;
+	}
+
+	dw_spi_enable_chip(dws, 1);
+
+	if (dws->dma_mapped)
+		return dws->dma_ops->dma_transfer(dws, transfer);
+	else if (dws->irq == IRQ_NOTCONNECTED)
+		return dw_spi_poll_transfer(dws, transfer);
+
+	dw_spi_irq_setup(dws);
+
+	return 1;
+}
+
+static void dw_spi_handle_err(struct spi_controller *master,
+			      struct spi_message *msg)
+{
+	struct dw_spi *dws = spi_controller_get_devdata(master);
+
+	if (dws->dma_mapped)
+		dws->dma_ops->dma_stop(dws);
+
+	dw_spi_reset_chip(dws);
+}
+
+static int dw_spi_adjust_mem_op_size(struct spi_mem *mem, struct spi_mem_op *op)
+{
+	if (op->data.dir == SPI_MEM_DATA_IN)
+		op->data.nbytes = clamp_val(op->data.nbytes, 0, DW_SPI_NDF_MASK + 1);
+
+	return 0;
+}
+
+static bool dw_spi_supports_mem_op(struct spi_mem *mem,
+				   const struct spi_mem_op *op)
+{
+	if (op->data.buswidth > 1 || op->addr.buswidth > 1 ||
+	    op->dummy.buswidth > 1 || op->cmd.buswidth > 1)
+		return false;
+
+	return spi_mem_default_supports_op(mem, op);
+}
+
+static int dw_spi_init_mem_buf(struct dw_spi *dws, const struct spi_mem_op *op)
+{
+	unsigned int i, j, len;
+	u8 *out;
+
+	/*
+	 * Calculate the total length of the EEPROM command transfer and
+	 * either use the pre-allocated buffer or create a temporary one.
+	 */
+	len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
+	if (op->data.dir == SPI_MEM_DATA_OUT)
+		len += op->data.nbytes;
+
+	if (len <= DW_SPI_BUF_SIZE) {
+		out = dws->buf;
+	} else {
+		out = kzalloc(len, GFP_KERNEL);
+		if (!out)
+			return -ENOMEM;
+	}
+
+	/*
+	 * Collect the operation code, address and dummy bytes into the single
+	 * buffer. If it's a transfer with data to be sent, also copy it into the
+	 * single buffer in order to speed the data transmission up.
+	 */
+	for (i = 0; i < op->cmd.nbytes; ++i)
+		out[i] = DW_SPI_GET_BYTE(op->cmd.opcode, op->cmd.nbytes - i - 1);
+	for (j = 0; j < op->addr.nbytes; ++i, ++j)
+		out[i] = DW_SPI_GET_BYTE(op->addr.val, op->addr.nbytes - j - 1);
+	for (j = 0; j < op->dummy.nbytes; ++i, ++j)
+		out[i] = 0x0;
+
+	if (op->data.dir == SPI_MEM_DATA_OUT)
+		memcpy(&out[i], op->data.buf.out, op->data.nbytes);
+
+	dws->n_bytes = 1;
+	dws->tx = out;
+	dws->tx_len = len;
+	if (op->data.dir == SPI_MEM_DATA_IN) {
+		dws->rx = op->data.buf.in;
+		dws->rx_len = op->data.nbytes;
+	} else {
+		dws->rx = NULL;
+		dws->rx_len = 0;
+	}
+
+	return 0;
+}
+
+static void dw_spi_free_mem_buf(struct dw_spi *dws)
+{
+	if (dws->tx != dws->buf)
+		kfree(dws->tx);
+}
+
+static int dw_spi_write_then_read(struct dw_spi *dws, struct spi_device *spi)
+{
+	u32 room, entries, sts;
+	unsigned int len;
+	u8 *buf;
+
+	/*
+	 * At initial stage we just pre-fill the Tx FIFO in with no rush,
+	 * since native CS hasn't been enabled yet and the automatic data
+	 * transmission won't start til we do that.
+	 */
+	len = min(dws->fifo_len, dws->tx_len);
+	buf = dws->tx;
+	while (len--)
+		dw_write_io_reg(dws, DW_SPI_DR, *buf++);
+
+	/*
+	 * After setting any bit in the SER register the transmission will
+	 * start automatically. We have to keep up with that procedure
+	 * otherwise the CS de-assertion will happen whereupon the memory
+	 * operation will be pre-terminated.
+	 */
+	len = dws->tx_len - ((void *)buf - dws->tx);
+	dw_spi_set_cs(spi, false);
+	while (len) {
+		entries = readl_relaxed(dws->regs + DW_SPI_TXFLR);
+		if (!entries) {
+			dev_err(&dws->master->dev, "CS de-assertion on Tx\n");
+			return -EIO;
+		}
+		room = min(dws->fifo_len - entries, len);
+		for (; room; --room, --len)
+			dw_write_io_reg(dws, DW_SPI_DR, *buf++);
+	}
+
+	/*
+	 * Data fetching will start automatically if the EEPROM-read mode is
+	 * activated. We have to keep up with the incoming data pace to
+	 * prevent the Rx FIFO overflow causing the inbound data loss.
+	 */
+	len = dws->rx_len;
+	buf = dws->rx;
+	while (len) {
+		entries = readl_relaxed(dws->regs + DW_SPI_RXFLR);
+		if (!entries) {
+			sts = readl_relaxed(dws->regs + DW_SPI_RISR);
+			if (sts & DW_SPI_INT_RXOI) {
+				dev_err(&dws->master->dev, "FIFO overflow on Rx\n");
+				return -EIO;
+			}
+			continue;
+		}
+		entries = min(entries, len);
+		for (; entries; --entries, --len)
+			*buf++ = dw_read_io_reg(dws, DW_SPI_DR);
+	}
+
+	return 0;
+}
+
+static inline bool dw_spi_ctlr_busy(struct dw_spi *dws)
+{
+	return dw_readl(dws, DW_SPI_SR) & DW_SPI_SR_BUSY;
+}
+
+static int dw_spi_wait_mem_op_done(struct dw_spi *dws)
+{
+	int retry = DW_SPI_WAIT_RETRIES;
+	struct spi_delay delay;
+	unsigned long ns, us;
+	u32 nents;
+
+	nents = dw_readl(dws, DW_SPI_TXFLR);
+	ns = NSEC_PER_SEC / dws->current_freq * nents;
+	ns *= dws->n_bytes * BITS_PER_BYTE;
+	if (ns <= NSEC_PER_USEC) {
+		delay.unit = SPI_DELAY_UNIT_NSECS;
+		delay.value = ns;
+	} else {
+		us = DIV_ROUND_UP(ns, NSEC_PER_USEC);
+		delay.unit = SPI_DELAY_UNIT_USECS;
+		delay.value = clamp_val(us, 0, USHRT_MAX);
+	}
+
+	while (dw_spi_ctlr_busy(dws) && retry--)
+		spi_delay_exec(&delay, NULL);
+
+	if (retry < 0) {
+		dev_err(&dws->master->dev, "Mem op hanged up\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void dw_spi_stop_mem_op(struct dw_spi *dws, struct spi_device *spi)
+{
+	dw_spi_enable_chip(dws, 0);
+	dw_spi_set_cs(spi, true);
+	dw_spi_enable_chip(dws, 1);
+}
+
+/*
+ * The SPI memory operation implementation below is the best choice for the
+ * devices, which are selected by the native chip-select lane. It's
+ * specifically developed to workaround the problem with automatic chip-select
+ * lane toggle when there is no data in the Tx FIFO buffer. Luckily the current
+ * SPI-mem core calls exec_op() callback only if the GPIO-based CS is
+ * unavailable.
+ */
+static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct dw_spi *dws = spi_controller_get_devdata(mem->spi->controller);
+	struct dw_spi_cfg cfg;
+	unsigned long flags;
+	int ret;
+
+	/*
+	 * Collect the outbound data into a single buffer to speed the
+	 * transmission up at least on the initial stage.
+	 */
+	ret = dw_spi_init_mem_buf(dws, op);
+	if (ret)
+		return ret;
+
+	/*
+	 * DW SPI EEPROM-read mode is required only for the SPI memory Data-IN
+	 * operation. Transmit-only mode is suitable for the rest of them.
+	 */
+	cfg.dfs = 8;
+	cfg.freq = clamp(mem->spi->max_speed_hz, 0U, dws->max_mem_freq);
+	if (op->data.dir == SPI_MEM_DATA_IN) {
+		cfg.tmode = DW_SPI_CTRLR0_TMOD_EPROMREAD;
+		cfg.ndf = op->data.nbytes;
+	} else {
+		cfg.tmode = DW_SPI_CTRLR0_TMOD_TO;
+	}
+
+	dw_spi_enable_chip(dws, 0);
+
+	dw_spi_update_config(dws, mem->spi, &cfg);
+
+	dw_spi_mask_intr(dws, 0xff);
+
+	dw_spi_enable_chip(dws, 1);
+
+	/*
+	 * DW APB SSI controller has very nasty peculiarities. First originally
+	 * (without any vendor-specific modifications) it doesn't provide a
+	 * direct way to set and clear the native chip-select signal. Instead
+	 * the controller asserts the CS lane if Tx FIFO isn't empty and a
+	 * transmission is going on, and automatically de-asserts it back to
+	 * the high level if the Tx FIFO doesn't have anything to be pushed
+	 * out. Due to that a multi-tasking or heavy IRQs activity might be
+	 * fatal, since the transfer procedure preemption may cause the Tx FIFO
+	 * getting empty and sudden CS de-assertion, which in the middle of the
+	 * transfer will most likely cause the data loss. Secondly the
+	 * EEPROM-read or Read-only DW SPI transfer modes imply the incoming
+	 * data being automatically pulled in into the Rx FIFO. So if the
+	 * driver software is late in fetching the data from the FIFO before
+	 * it's overflown, new incoming data will be lost. In order to make
+	 * sure the executed memory operations are CS-atomic and to prevent the
+	 * Rx FIFO overflow we have to disable the local interrupts so to block
+	 * any preemption during the subsequent IO operations.
+	 *
+	 * Note. At some circumstances disabling IRQs may not help to prevent
+	 * the problems described above. The CS de-assertion and Rx FIFO
+	 * overflow may still happen due to the relatively slow system bus or
+	 * CPU not working fast enough, so the write-then-read algo implemented
+	 * here just won't keep up with the SPI bus data transfer. Such
+	 * situation is highly platform specific and is supposed to be fixed by
+	 * manually restricting the SPI bus frequency using the
+	 * dws->max_mem_freq parameter.
+	 */
+	local_irq_save(flags);
+	preempt_disable();
+
+	ret = dw_spi_write_then_read(dws, mem->spi);
+
+	local_irq_restore(flags);
+	preempt_enable();
+
+	/*
+	 * Wait for the operation being finished and check the controller
+	 * status only if there hasn't been any run-time error detected. In the
+	 * former case it's just pointless. In the later one to prevent an
+	 * additional error message printing since any hw error flag being set
+	 * would be due to an error detected on the data transfer.
+	 */
+	if (!ret) {
+		ret = dw_spi_wait_mem_op_done(dws);
+		if (!ret)
+			ret = dw_spi_check_status(dws, true);
+	}
+
+	dw_spi_stop_mem_op(dws, mem->spi);
+
+	dw_spi_free_mem_buf(dws);
+
+	return ret;
+}
+
+/*
+ * Initialize the default memory operations if a glue layer hasn't specified
+ * custom ones. Direct mapping operations will be preserved anyway since DW SPI
+ * controller doesn't have an embedded dirmap interface. Note the memory
+ * operations implemented in this driver is the best choice only for the DW APB
+ * SSI controller with standard native CS functionality. If a hardware vendor
+ * has fixed the automatic CS assertion/de-assertion peculiarity, then it will
+ * be safer to use the normal SPI-messages-based transfers implementation.
+ */
+static void dw_spi_init_mem_ops(struct dw_spi *dws)
+{
+	if (!dws->mem_ops.exec_op && !(dws->caps & DW_SPI_CAP_CS_OVERRIDE) &&
+	    !dws->set_cs) {
+		dws->mem_ops.adjust_op_size = dw_spi_adjust_mem_op_size;
+		dws->mem_ops.supports_op = dw_spi_supports_mem_op;
+		dws->mem_ops.exec_op = dw_spi_exec_mem_op;
+		if (!dws->max_mem_freq)
+			dws->max_mem_freq = dws->max_freq;
+	}
+}
+
+/* This may be called twice for each spi dev */
+static int dw_spi_setup(struct spi_device *spi)
+{
+	struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
+	struct dw_spi_chip_data *chip;
+
+	/* Only alloc on first setup */
+	chip = spi_get_ctldata(spi);
+	if (!chip) {
+		struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
+		u32 rx_sample_dly_ns;
+
+		chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+		if (!chip)
+			return -ENOMEM;
+		spi_set_ctldata(spi, chip);
+		/* Get specific / default rx-sample-delay */
+		if (device_property_read_u32(&spi->dev,
+					     "rx-sample-delay-ns",
+					     &rx_sample_dly_ns) != 0)
+			/* Use default controller value */
+			rx_sample_dly_ns = dws->def_rx_sample_dly_ns;
+		chip->rx_sample_dly = DIV_ROUND_CLOSEST(rx_sample_dly_ns,
+							NSEC_PER_SEC /
+							dws->max_freq);
+	}
+
+	/*
+	 * Update CR0 data each time the setup callback is invoked since
+	 * the device parameters could have been changed, for instance, by
+	 * the MMC SPI driver or something else.
+	 */
+	chip->cr0 = dw_spi_prepare_cr0(dws, spi);
+
+	return 0;
+}
+
+static void dw_spi_cleanup(struct spi_device *spi)
+{
+	struct dw_spi_chip_data *chip = spi_get_ctldata(spi);
+
+	kfree(chip);
+	spi_set_ctldata(spi, NULL);
+}
+
+/* Restart the controller, disable all interrupts, clean rx fifo */
+static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws)
+{
+	dw_spi_reset_chip(dws);
+
+	/*
+	 * Retrieve the Synopsys component version if it hasn't been specified
+	 * by the platform. CoreKit version ID is encoded as a 3-chars ASCII
+	 * code enclosed with '*' (typical for the most of Synopsys IP-cores).
+	 */
+	if (!dws->ver) {
+		dws->ver = dw_readl(dws, DW_SPI_VERSION);
+
+		dev_dbg(dev, "Synopsys DWC%sSSI v%c.%c%c\n",
+			dw_spi_ip_is(dws, PSSI) ? " APB " : " ",
+			DW_SPI_GET_BYTE(dws->ver, 3), DW_SPI_GET_BYTE(dws->ver, 2),
+			DW_SPI_GET_BYTE(dws->ver, 1));
+	}
+
+	/*
+	 * Try to detect the FIFO depth if not set by interface driver,
+	 * the depth could be from 2 to 256 from HW spec
+	 */
+	if (!dws->fifo_len) {
+		u32 fifo;
+
+		for (fifo = 1; fifo < 256; fifo++) {
+			dw_writel(dws, DW_SPI_TXFTLR, fifo);
+			if (fifo != dw_readl(dws, DW_SPI_TXFTLR))
+				break;
+		}
+		dw_writel(dws, DW_SPI_TXFTLR, 0);
+
+		dws->fifo_len = (fifo == 1) ? 0 : fifo;
+		dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
+	}
+
+	/*
+	 * Detect CTRLR0.DFS field size and offset by testing the lowest bits
+	 * writability. Note DWC SSI controller also has the extended DFS, but
+	 * with zero offset.
+	 */
+	if (dw_spi_ip_is(dws, PSSI)) {
+		u32 cr0, tmp = dw_readl(dws, DW_SPI_CTRLR0);
+
+		dw_spi_enable_chip(dws, 0);
+		dw_writel(dws, DW_SPI_CTRLR0, 0xffffffff);
+		cr0 = dw_readl(dws, DW_SPI_CTRLR0);
+		dw_writel(dws, DW_SPI_CTRLR0, tmp);
+		dw_spi_enable_chip(dws, 1);
+
+		if (!(cr0 & DW_PSSI_CTRLR0_DFS_MASK)) {
+			dws->caps |= DW_SPI_CAP_DFS32;
+			dws->dfs_offset = __bf_shf(DW_PSSI_CTRLR0_DFS32_MASK);
+			dev_dbg(dev, "Detected 32-bits max data frame size\n");
+		}
+	} else {
+		dws->caps |= DW_SPI_CAP_DFS32;
+	}
+
+	/* enable HW fixup for explicit CS deselect for Amazon's alpine chip */
+	if (dws->caps & DW_SPI_CAP_CS_OVERRIDE)
+		dw_writel(dws, DW_SPI_CS_OVERRIDE, 0xF);
+}
+
+int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
+{
+	struct spi_controller *master;
+	int ret;
+
+	if (!dws)
+		return -EINVAL;
+
+	master = spi_alloc_master(dev, 0);
+	if (!master)
+		return -ENOMEM;
+
+	device_set_node(&master->dev, dev_fwnode(dev));
+
+	dws->master = master;
+	dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
+
+	spi_controller_set_devdata(master, dws);
+
+	/* Basic HW init */
+	dw_spi_hw_init(dev, dws);
+
+	ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dev_name(dev),
+			  master);
+	if (ret < 0 && ret != -ENOTCONN) {
+		dev_err(dev, "can not get IRQ\n");
+		goto err_free_master;
+	}
+
+	dw_spi_init_mem_ops(dws);
+
+	master->use_gpio_descriptors = true;
+	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP;
+	if (dws->caps & DW_SPI_CAP_DFS32)
+		master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
+	else
+		master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
+	master->bus_num = dws->bus_num;
+	master->num_chipselect = dws->num_cs;
+	master->setup = dw_spi_setup;
+	master->cleanup = dw_spi_cleanup;
+	if (dws->set_cs)
+		master->set_cs = dws->set_cs;
+	else
+		master->set_cs = dw_spi_set_cs;
+	master->transfer_one = dw_spi_transfer_one;
+	master->handle_err = dw_spi_handle_err;
+	if (dws->mem_ops.exec_op)
+		master->mem_ops = &dws->mem_ops;
+	master->max_speed_hz = dws->max_freq;
+	master->flags = SPI_MASTER_GPIO_SS;
+	master->auto_runtime_pm = true;
+
+	/* Get default rx sample delay */
+	device_property_read_u32(dev, "rx-sample-delay-ns",
+				 &dws->def_rx_sample_dly_ns);
+
+	if (dws->dma_ops && dws->dma_ops->dma_init) {
+		ret = dws->dma_ops->dma_init(dev, dws);
+		if (ret == -EPROBE_DEFER) {
+			goto err_free_irq;
+		} else if (ret) {
+			dev_warn(dev, "DMA init failed\n");
+		} else {
+			master->can_dma = dws->dma_ops->can_dma;
+			master->flags |= SPI_CONTROLLER_MUST_TX;
+		}
+	}
+
+	ret = spi_register_controller(master);
+	if (ret) {
+		dev_err_probe(dev, ret, "problem registering spi master\n");
+		goto err_dma_exit;
+	}
+
+	dw_spi_debugfs_init(dws);
+	return 0;
+
+err_dma_exit:
+	if (dws->dma_ops && dws->dma_ops->dma_exit)
+		dws->dma_ops->dma_exit(dws);
+	dw_spi_enable_chip(dws, 0);
+err_free_irq:
+	free_irq(dws->irq, master);
+err_free_master:
+	spi_controller_put(master);
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(dw_spi_add_host, SPI_DW_CORE);
+
+void dw_spi_remove_host(struct dw_spi *dws)
+{
+	dw_spi_debugfs_remove(dws);
+
+	spi_unregister_controller(dws->master);
+
+	if (dws->dma_ops && dws->dma_ops->dma_exit)
+		dws->dma_ops->dma_exit(dws);
+
+	dw_spi_shutdown_chip(dws);
+
+	free_irq(dws->irq, dws->master);
+}
+EXPORT_SYMBOL_NS_GPL(dw_spi_remove_host, SPI_DW_CORE);
+
+int dw_spi_suspend_host(struct dw_spi *dws)
+{
+	int ret;
+
+	ret = spi_controller_suspend(dws->master);
+	if (ret)
+		return ret;
+
+	dw_spi_shutdown_chip(dws);
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(dw_spi_suspend_host, SPI_DW_CORE);
+
+int dw_spi_resume_host(struct dw_spi *dws)
+{
+	dw_spi_hw_init(&dws->master->dev, dws);
+	return spi_controller_resume(dws->master);
+}
+EXPORT_SYMBOL_NS_GPL(dw_spi_resume_host, SPI_DW_CORE);
+
+MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
+MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
+MODULE_LICENSE("GPL v2");