Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 852 insertions, 0 deletions

diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c
new file mode 100644
index 000000000..a3dba1739
--- /dev/null
+++ b/drivers/spi/spi-mxic.c
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 Macronix International Co., Ltd.
+//
+// Authors:
+//	Mason Yang <masonccyang@mxic.com.tw>
+//	zhengxunli <zhengxunli@mxic.com.tw>
+//	Boris Brezillon <boris.brezillon@bootlin.com>
+//
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand-ecc-mxic.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+
+#define HC_CFG			0x0
+#define HC_CFG_IF_CFG(x)	((x) << 27)
+#define HC_CFG_DUAL_SLAVE	BIT(31)
+#define HC_CFG_INDIVIDUAL	BIT(30)
+#define HC_CFG_NIO(x)		(((x) / 4) << 27)
+#define HC_CFG_TYPE(s, t)	((t) << (23 + ((s) * 2)))
+#define HC_CFG_TYPE_SPI_NOR	0
+#define HC_CFG_TYPE_SPI_NAND	1
+#define HC_CFG_TYPE_SPI_RAM	2
+#define HC_CFG_TYPE_RAW_NAND	3
+#define HC_CFG_SLV_ACT(x)	((x) << 21)
+#define HC_CFG_CLK_PH_EN	BIT(20)
+#define HC_CFG_CLK_POL_INV	BIT(19)
+#define HC_CFG_BIG_ENDIAN	BIT(18)
+#define HC_CFG_DATA_PASS	BIT(17)
+#define HC_CFG_IDLE_SIO_LVL(x)	((x) << 16)
+#define HC_CFG_MAN_START_EN	BIT(3)
+#define HC_CFG_MAN_START	BIT(2)
+#define HC_CFG_MAN_CS_EN	BIT(1)
+#define HC_CFG_MAN_CS_ASSERT	BIT(0)
+
+#define INT_STS			0x4
+#define INT_STS_EN		0x8
+#define INT_SIG_EN		0xc
+#define INT_STS_ALL		GENMASK(31, 0)
+#define INT_RDY_PIN		BIT(26)
+#define INT_RDY_SR		BIT(25)
+#define INT_LNR_SUSP		BIT(24)
+#define INT_ECC_ERR		BIT(17)
+#define INT_CRC_ERR		BIT(16)
+#define INT_LWR_DIS		BIT(12)
+#define INT_LRD_DIS		BIT(11)
+#define INT_SDMA_INT		BIT(10)
+#define INT_DMA_FINISH		BIT(9)
+#define INT_RX_NOT_FULL		BIT(3)
+#define INT_RX_NOT_EMPTY	BIT(2)
+#define INT_TX_NOT_FULL		BIT(1)
+#define INT_TX_EMPTY		BIT(0)
+
+#define HC_EN			0x10
+#define HC_EN_BIT		BIT(0)
+
+#define TXD(x)			(0x14 + ((x) * 4))
+#define RXD			0x24
+
+#define SS_CTRL(s)		(0x30 + ((s) * 4))
+#define LRD_CFG			0x44
+#define LWR_CFG			0x80
+#define RWW_CFG			0x70
+#define OP_READ			BIT(23)
+#define OP_DUMMY_CYC(x)		((x) << 17)
+#define OP_ADDR_BYTES(x)	((x) << 14)
+#define OP_CMD_BYTES(x)		(((x) - 1) << 13)
+#define OP_OCTA_CRC_EN		BIT(12)
+#define OP_DQS_EN		BIT(11)
+#define OP_ENHC_EN		BIT(10)
+#define OP_PREAMBLE_EN		BIT(9)
+#define OP_DATA_DDR		BIT(8)
+#define OP_DATA_BUSW(x)		((x) << 6)
+#define OP_ADDR_DDR		BIT(5)
+#define OP_ADDR_BUSW(x)		((x) << 3)
+#define OP_CMD_DDR		BIT(2)
+#define OP_CMD_BUSW(x)		(x)
+#define OP_BUSW_1		0
+#define OP_BUSW_2		1
+#define OP_BUSW_4		2
+#define OP_BUSW_8		3
+
+#define OCTA_CRC		0x38
+#define OCTA_CRC_IN_EN(s)	BIT(3 + ((s) * 16))
+#define OCTA_CRC_CHUNK(s, x)	((fls((x) / 32)) << (1 + ((s) * 16)))
+#define OCTA_CRC_OUT_EN(s)	BIT(0 + ((s) * 16))
+
+#define ONFI_DIN_CNT(s)		(0x3c + (s))
+
+#define LRD_CTRL		0x48
+#define RWW_CTRL		0x74
+#define LWR_CTRL		0x84
+#define LMODE_EN		BIT(31)
+#define LMODE_SLV_ACT(x)	((x) << 21)
+#define LMODE_CMD1(x)		((x) << 8)
+#define LMODE_CMD0(x)		(x)
+
+#define LRD_ADDR		0x4c
+#define LWR_ADDR		0x88
+#define LRD_RANGE		0x50
+#define LWR_RANGE		0x8c
+
+#define AXI_SLV_ADDR		0x54
+
+#define DMAC_RD_CFG		0x58
+#define DMAC_WR_CFG		0x94
+#define DMAC_CFG_PERIPH_EN	BIT(31)
+#define DMAC_CFG_ALLFLUSH_EN	BIT(30)
+#define DMAC_CFG_LASTFLUSH_EN	BIT(29)
+#define DMAC_CFG_QE(x)		(((x) + 1) << 16)
+#define DMAC_CFG_BURST_LEN(x)	(((x) + 1) << 12)
+#define DMAC_CFG_BURST_SZ(x)	((x) << 8)
+#define DMAC_CFG_DIR_READ	BIT(1)
+#define DMAC_CFG_START		BIT(0)
+
+#define DMAC_RD_CNT		0x5c
+#define DMAC_WR_CNT		0x98
+
+#define SDMA_ADDR		0x60
+
+#define DMAM_CFG		0x64
+#define DMAM_CFG_START		BIT(31)
+#define DMAM_CFG_CONT		BIT(30)
+#define DMAM_CFG_SDMA_GAP(x)	(fls((x) / 8192) << 2)
+#define DMAM_CFG_DIR_READ	BIT(1)
+#define DMAM_CFG_EN		BIT(0)
+
+#define DMAM_CNT		0x68
+
+#define LNR_TIMER_TH		0x6c
+
+#define RDM_CFG0		0x78
+#define RDM_CFG0_POLY(x)	(x)
+
+#define RDM_CFG1		0x7c
+#define RDM_CFG1_RDM_EN		BIT(31)
+#define RDM_CFG1_SEED(x)	(x)
+
+#define LWR_SUSP_CTRL		0x90
+#define LWR_SUSP_CTRL_EN	BIT(31)
+
+#define DMAS_CTRL		0x9c
+#define DMAS_CTRL_EN		BIT(31)
+#define DMAS_CTRL_DIR_READ	BIT(30)
+
+#define DATA_STROB		0xa0
+#define DATA_STROB_EDO_EN	BIT(2)
+#define DATA_STROB_INV_POL	BIT(1)
+#define DATA_STROB_DELAY_2CYC	BIT(0)
+
+#define IDLY_CODE(x)		(0xa4 + ((x) * 4))
+#define IDLY_CODE_VAL(x, v)	((v) << (((x) % 4) * 8))
+
+#define GPIO			0xc4
+#define GPIO_PT(x)		BIT(3 + ((x) * 16))
+#define GPIO_RESET(x)		BIT(2 + ((x) * 16))
+#define GPIO_HOLDB(x)		BIT(1 + ((x) * 16))
+#define GPIO_WPB(x)		BIT((x) * 16)
+
+#define HC_VER			0xd0
+
+#define HW_TEST(x)		(0xe0 + ((x) * 4))
+
+struct mxic_spi {
+	struct device *dev;
+	struct clk *ps_clk;
+	struct clk *send_clk;
+	struct clk *send_dly_clk;
+	void __iomem *regs;
+	u32 cur_speed_hz;
+	struct {
+		void __iomem *map;
+		dma_addr_t dma;
+		size_t size;
+	} linear;
+
+	struct {
+		bool use_pipelined_conf;
+		struct nand_ecc_engine *pipelined_engine;
+		void *ctx;
+	} ecc;
+};
+
+static int mxic_spi_clk_enable(struct mxic_spi *mxic)
+{
+	int ret;
+
+	ret = clk_prepare_enable(mxic->send_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(mxic->send_dly_clk);
+	if (ret)
+		goto err_send_dly_clk;
+
+	return ret;
+
+err_send_dly_clk:
+	clk_disable_unprepare(mxic->send_clk);
+
+	return ret;
+}
+
+static void mxic_spi_clk_disable(struct mxic_spi *mxic)
+{
+	clk_disable_unprepare(mxic->send_clk);
+	clk_disable_unprepare(mxic->send_dly_clk);
+}
+
+static void mxic_spi_set_input_delay_dqs(struct mxic_spi *mxic, u8 idly_code)
+{
+	writel(IDLY_CODE_VAL(0, idly_code) |
+	       IDLY_CODE_VAL(1, idly_code) |
+	       IDLY_CODE_VAL(2, idly_code) |
+	       IDLY_CODE_VAL(3, idly_code),
+	       mxic->regs + IDLY_CODE(0));
+	writel(IDLY_CODE_VAL(4, idly_code) |
+	       IDLY_CODE_VAL(5, idly_code) |
+	       IDLY_CODE_VAL(6, idly_code) |
+	       IDLY_CODE_VAL(7, idly_code),
+	       mxic->regs + IDLY_CODE(1));
+}
+
+static int mxic_spi_clk_setup(struct mxic_spi *mxic, unsigned long freq)
+{
+	int ret;
+
+	ret = clk_set_rate(mxic->send_clk, freq);
+	if (ret)
+		return ret;
+
+	ret = clk_set_rate(mxic->send_dly_clk, freq);
+	if (ret)
+		return ret;
+
+	/*
+	 * A constant delay range from 0x0 ~ 0x1F for input delay,
+	 * the unit is 78 ps, the max input delay is 2.418 ns.
+	 */
+	mxic_spi_set_input_delay_dqs(mxic, 0xf);
+
+	/*
+	 * Phase degree = 360 * freq * output-delay
+	 * where output-delay is a constant value 1 ns in FPGA.
+	 *
+	 * Get Phase degree = 360 * freq * 1 ns
+	 *                  = 360 * freq * 1 sec / 1000000000
+	 *                  = 9 * freq / 25000000
+	 */
+	ret = clk_set_phase(mxic->send_dly_clk, 9 * freq / 25000000);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int mxic_spi_set_freq(struct mxic_spi *mxic, unsigned long freq)
+{
+	int ret;
+
+	if (mxic->cur_speed_hz == freq)
+		return 0;
+
+	mxic_spi_clk_disable(mxic);
+	ret = mxic_spi_clk_setup(mxic, freq);
+	if (ret)
+		return ret;
+
+	ret = mxic_spi_clk_enable(mxic);
+	if (ret)
+		return ret;
+
+	mxic->cur_speed_hz = freq;
+
+	return 0;
+}
+
+static void mxic_spi_hw_init(struct mxic_spi *mxic)
+{
+	writel(0, mxic->regs + DATA_STROB);
+	writel(INT_STS_ALL, mxic->regs + INT_STS_EN);
+	writel(0, mxic->regs + HC_EN);
+	writel(0, mxic->regs + LRD_CFG);
+	writel(0, mxic->regs + LRD_CTRL);
+	writel(HC_CFG_NIO(1) | HC_CFG_TYPE(0, HC_CFG_TYPE_SPI_NOR) |
+	       HC_CFG_SLV_ACT(0) | HC_CFG_MAN_CS_EN | HC_CFG_IDLE_SIO_LVL(1),
+	       mxic->regs + HC_CFG);
+}
+
+static u32 mxic_spi_prep_hc_cfg(struct spi_device *spi, u32 flags)
+{
+	int nio = 1;
+
+	if (spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL))
+		nio = 8;
+	else if (spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD))
+		nio = 4;
+	else if (spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL))
+		nio = 2;
+
+	return flags | HC_CFG_NIO(nio) |
+	       HC_CFG_TYPE(spi->chip_select, HC_CFG_TYPE_SPI_NOR) |
+	       HC_CFG_SLV_ACT(spi->chip_select) | HC_CFG_IDLE_SIO_LVL(1);
+}
+
+static u32 mxic_spi_mem_prep_op_cfg(const struct spi_mem_op *op,
+				    unsigned int data_len)
+{
+	u32 cfg = OP_CMD_BYTES(op->cmd.nbytes) |
+		  OP_CMD_BUSW(fls(op->cmd.buswidth) - 1) |
+		  (op->cmd.dtr ? OP_CMD_DDR : 0);
+
+	if (op->addr.nbytes)
+		cfg |= OP_ADDR_BYTES(op->addr.nbytes) |
+		       OP_ADDR_BUSW(fls(op->addr.buswidth) - 1) |
+		       (op->addr.dtr ? OP_ADDR_DDR : 0);
+
+	if (op->dummy.nbytes)
+		cfg |= OP_DUMMY_CYC(op->dummy.nbytes);
+
+	/* Direct mapping data.nbytes field is not populated */
+	if (data_len) {
+		cfg |= OP_DATA_BUSW(fls(op->data.buswidth) - 1) |
+		       (op->data.dtr ? OP_DATA_DDR : 0);
+		if (op->data.dir == SPI_MEM_DATA_IN) {
+			cfg |= OP_READ;
+			if (op->data.dtr)
+				cfg |= OP_DQS_EN;
+		}
+	}
+
+	return cfg;
+}
+
+static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf,
+			      void *rxbuf, unsigned int len)
+{
+	unsigned int pos = 0;
+
+	while (pos < len) {
+		unsigned int nbytes = len - pos;
+		u32 data = 0xffffffff;
+		u32 sts;
+		int ret;
+
+		if (nbytes > 4)
+			nbytes = 4;
+
+		if (txbuf)
+			memcpy(&data, txbuf + pos, nbytes);
+
+		ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+					 sts & INT_TX_EMPTY, 0, USEC_PER_SEC);
+		if (ret)
+			return ret;
+
+		writel(data, mxic->regs + TXD(nbytes % 4));
+
+		ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+					 sts & INT_TX_EMPTY, 0, USEC_PER_SEC);
+		if (ret)
+			return ret;
+
+		ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+					 sts & INT_RX_NOT_EMPTY, 0,
+					 USEC_PER_SEC);
+		if (ret)
+			return ret;
+
+		data = readl(mxic->regs + RXD);
+		if (rxbuf) {
+			data >>= (8 * (4 - nbytes));
+			memcpy(rxbuf + pos, &data, nbytes);
+		}
+		WARN_ON(readl(mxic->regs + INT_STS) & INT_RX_NOT_EMPTY);
+
+		pos += nbytes;
+	}
+
+	return 0;
+}
+
+static ssize_t mxic_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc,
+					u64 offs, size_t len, void *buf)
+{
+	struct mxic_spi *mxic = spi_master_get_devdata(desc->mem->spi->master);
+	int ret;
+	u32 sts;
+
+	if (WARN_ON(offs + desc->info.offset + len > U32_MAX))
+		return -EINVAL;
+
+	writel(mxic_spi_prep_hc_cfg(desc->mem->spi, 0), mxic->regs + HC_CFG);
+
+	writel(mxic_spi_mem_prep_op_cfg(&desc->info.op_tmpl, len),
+	       mxic->regs + LRD_CFG);
+	writel(desc->info.offset + offs, mxic->regs + LRD_ADDR);
+	len = min_t(size_t, len, mxic->linear.size);
+	writel(len, mxic->regs + LRD_RANGE);
+	writel(LMODE_CMD0(desc->info.op_tmpl.cmd.opcode) |
+	       LMODE_SLV_ACT(desc->mem->spi->chip_select) |
+	       LMODE_EN,
+	       mxic->regs + LRD_CTRL);
+
+	if (mxic->ecc.use_pipelined_conf && desc->info.op_tmpl.data.ecc) {
+		ret = mxic_ecc_process_data_pipelined(mxic->ecc.pipelined_engine,
+						      NAND_PAGE_READ,
+						      mxic->linear.dma + offs);
+		if (ret)
+			return ret;
+	} else {
+		memcpy_fromio(buf, mxic->linear.map, len);
+	}
+
+	writel(INT_LRD_DIS, mxic->regs + INT_STS);
+	writel(0, mxic->regs + LRD_CTRL);
+
+	ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+				 sts & INT_LRD_DIS, 0, USEC_PER_SEC);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+static ssize_t mxic_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
+					 u64 offs, size_t len,
+					 const void *buf)
+{
+	struct mxic_spi *mxic = spi_master_get_devdata(desc->mem->spi->master);
+	u32 sts;
+	int ret;
+
+	if (WARN_ON(offs + desc->info.offset + len > U32_MAX))
+		return -EINVAL;
+
+	writel(mxic_spi_prep_hc_cfg(desc->mem->spi, 0), mxic->regs + HC_CFG);
+
+	writel(mxic_spi_mem_prep_op_cfg(&desc->info.op_tmpl, len),
+	       mxic->regs + LWR_CFG);
+	writel(desc->info.offset + offs, mxic->regs + LWR_ADDR);
+	len = min_t(size_t, len, mxic->linear.size);
+	writel(len, mxic->regs + LWR_RANGE);
+	writel(LMODE_CMD0(desc->info.op_tmpl.cmd.opcode) |
+	       LMODE_SLV_ACT(desc->mem->spi->chip_select) |
+	       LMODE_EN,
+	       mxic->regs + LWR_CTRL);
+
+	if (mxic->ecc.use_pipelined_conf && desc->info.op_tmpl.data.ecc) {
+		ret = mxic_ecc_process_data_pipelined(mxic->ecc.pipelined_engine,
+						      NAND_PAGE_WRITE,
+						      mxic->linear.dma + offs);
+		if (ret)
+			return ret;
+	} else {
+		memcpy_toio(mxic->linear.map, buf, len);
+	}
+
+	writel(INT_LWR_DIS, mxic->regs + INT_STS);
+	writel(0, mxic->regs + LWR_CTRL);
+
+	ret = readl_poll_timeout(mxic->regs + INT_STS, sts,
+				 sts & INT_LWR_DIS, 0, USEC_PER_SEC);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
+				     const struct spi_mem_op *op)
+{
+	if (op->data.buswidth > 8 || op->addr.buswidth > 8 ||
+	    op->dummy.buswidth > 8 || op->cmd.buswidth > 8)
+		return false;
+
+	if (op->data.nbytes && op->dummy.nbytes &&
+	    op->data.buswidth != op->dummy.buswidth)
+		return false;
+
+	if (op->addr.nbytes > 7)
+		return false;
+
+	return spi_mem_default_supports_op(mem, op);
+}
+
+static int mxic_spi_mem_dirmap_create(struct spi_mem_dirmap_desc *desc)
+{
+	struct mxic_spi *mxic = spi_master_get_devdata(desc->mem->spi->master);
+
+	if (!mxic->linear.map)
+		return -EINVAL;
+
+	if (desc->info.offset + desc->info.length > U32_MAX)
+		return -EINVAL;
+
+	if (!mxic_spi_mem_supports_op(desc->mem, &desc->info.op_tmpl))
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+static int mxic_spi_mem_exec_op(struct spi_mem *mem,
+				const struct spi_mem_op *op)
+{
+	struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master);
+	int i, ret;
+	u8 addr[8], cmd[2];
+
+	ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz);
+	if (ret)
+		return ret;
+
+	writel(mxic_spi_prep_hc_cfg(mem->spi, HC_CFG_MAN_CS_EN),
+	       mxic->regs + HC_CFG);
+
+	writel(HC_EN_BIT, mxic->regs + HC_EN);
+
+	writel(mxic_spi_mem_prep_op_cfg(op, op->data.nbytes),
+	       mxic->regs + SS_CTRL(mem->spi->chip_select));
+
+	writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT,
+	       mxic->regs + HC_CFG);
+
+	for (i = 0; i < op->cmd.nbytes; i++)
+		cmd[i] = op->cmd.opcode >> (8 * (op->cmd.nbytes - i - 1));
+
+	ret = mxic_spi_data_xfer(mxic, cmd, NULL, op->cmd.nbytes);
+	if (ret)
+		goto out;
+
+	for (i = 0; i < op->addr.nbytes; i++)
+		addr[i] = op->addr.val >> (8 * (op->addr.nbytes - i - 1));
+
+	ret = mxic_spi_data_xfer(mxic, addr, NULL, op->addr.nbytes);
+	if (ret)
+		goto out;
+
+	ret = mxic_spi_data_xfer(mxic, NULL, NULL, op->dummy.nbytes);
+	if (ret)
+		goto out;
+
+	ret = mxic_spi_data_xfer(mxic,
+				 op->data.dir == SPI_MEM_DATA_OUT ?
+				 op->data.buf.out : NULL,
+				 op->data.dir == SPI_MEM_DATA_IN ?
+				 op->data.buf.in : NULL,
+				 op->data.nbytes);
+
+out:
+	writel(readl(mxic->regs + HC_CFG) & ~HC_CFG_MAN_CS_ASSERT,
+	       mxic->regs + HC_CFG);
+	writel(0, mxic->regs + HC_EN);
+
+	return ret;
+}
+
+static const struct spi_controller_mem_ops mxic_spi_mem_ops = {
+	.supports_op = mxic_spi_mem_supports_op,
+	.exec_op = mxic_spi_mem_exec_op,
+	.dirmap_create = mxic_spi_mem_dirmap_create,
+	.dirmap_read = mxic_spi_mem_dirmap_read,
+	.dirmap_write = mxic_spi_mem_dirmap_write,
+};
+
+static const struct spi_controller_mem_caps mxic_spi_mem_caps = {
+	.dtr = true,
+	.ecc = true,
+};
+
+static void mxic_spi_set_cs(struct spi_device *spi, bool lvl)
+{
+	struct mxic_spi *mxic = spi_master_get_devdata(spi->master);
+
+	if (!lvl) {
+		writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_EN,
+		       mxic->regs + HC_CFG);
+		writel(HC_EN_BIT, mxic->regs + HC_EN);
+		writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT,
+		       mxic->regs + HC_CFG);
+	} else {
+		writel(readl(mxic->regs + HC_CFG) & ~HC_CFG_MAN_CS_ASSERT,
+		       mxic->regs + HC_CFG);
+		writel(0, mxic->regs + HC_EN);
+	}
+}
+
+static int mxic_spi_transfer_one(struct spi_master *master,
+				 struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	struct mxic_spi *mxic = spi_master_get_devdata(master);
+	unsigned int busw = OP_BUSW_1;
+	int ret;
+
+	if (t->rx_buf && t->tx_buf) {
+		if (((spi->mode & SPI_TX_QUAD) &&
+		     !(spi->mode & SPI_RX_QUAD)) ||
+		    ((spi->mode & SPI_TX_DUAL) &&
+		     !(spi->mode & SPI_RX_DUAL)))
+			return -ENOTSUPP;
+	}
+
+	ret = mxic_spi_set_freq(mxic, t->speed_hz);
+	if (ret)
+		return ret;
+
+	if (t->tx_buf) {
+		if (spi->mode & SPI_TX_QUAD)
+			busw = OP_BUSW_4;
+		else if (spi->mode & SPI_TX_DUAL)
+			busw = OP_BUSW_2;
+	} else if (t->rx_buf) {
+		if (spi->mode & SPI_RX_QUAD)
+			busw = OP_BUSW_4;
+		else if (spi->mode & SPI_RX_DUAL)
+			busw = OP_BUSW_2;
+	}
+
+	writel(OP_CMD_BYTES(1) | OP_CMD_BUSW(busw) |
+	       OP_DATA_BUSW(busw) | (t->rx_buf ? OP_READ : 0),
+	       mxic->regs + SS_CTRL(0));
+
+	ret = mxic_spi_data_xfer(mxic, t->tx_buf, t->rx_buf, t->len);
+	if (ret)
+		return ret;
+
+	spi_finalize_current_transfer(master);
+
+	return 0;
+}
+
+/* ECC wrapper */
+static int mxic_spi_mem_ecc_init_ctx(struct nand_device *nand)
+{
+	struct nand_ecc_engine_ops *ops = mxic_ecc_get_pipelined_ops();
+	struct mxic_spi *mxic = nand->ecc.engine->priv;
+
+	mxic->ecc.use_pipelined_conf = true;
+
+	return ops->init_ctx(nand);
+}
+
+static void mxic_spi_mem_ecc_cleanup_ctx(struct nand_device *nand)
+{
+	struct nand_ecc_engine_ops *ops = mxic_ecc_get_pipelined_ops();
+	struct mxic_spi *mxic = nand->ecc.engine->priv;
+
+	mxic->ecc.use_pipelined_conf = false;
+
+	ops->cleanup_ctx(nand);
+}
+
+static int mxic_spi_mem_ecc_prepare_io_req(struct nand_device *nand,
+					   struct nand_page_io_req *req)
+{
+	struct nand_ecc_engine_ops *ops = mxic_ecc_get_pipelined_ops();
+
+	return ops->prepare_io_req(nand, req);
+}
+
+static int mxic_spi_mem_ecc_finish_io_req(struct nand_device *nand,
+					  struct nand_page_io_req *req)
+{
+	struct nand_ecc_engine_ops *ops = mxic_ecc_get_pipelined_ops();
+
+	return ops->finish_io_req(nand, req);
+}
+
+static struct nand_ecc_engine_ops mxic_spi_mem_ecc_engine_pipelined_ops = {
+	.init_ctx = mxic_spi_mem_ecc_init_ctx,
+	.cleanup_ctx = mxic_spi_mem_ecc_cleanup_ctx,
+	.prepare_io_req = mxic_spi_mem_ecc_prepare_io_req,
+	.finish_io_req = mxic_spi_mem_ecc_finish_io_req,
+};
+
+static void mxic_spi_mem_ecc_remove(struct mxic_spi *mxic)
+{
+	if (mxic->ecc.pipelined_engine) {
+		mxic_ecc_put_pipelined_engine(mxic->ecc.pipelined_engine);
+		nand_ecc_unregister_on_host_hw_engine(mxic->ecc.pipelined_engine);
+	}
+}
+
+static int mxic_spi_mem_ecc_probe(struct platform_device *pdev,
+				  struct mxic_spi *mxic)
+{
+	struct nand_ecc_engine *eng;
+
+	if (!mxic_ecc_get_pipelined_ops())
+		return -EOPNOTSUPP;
+
+	eng = mxic_ecc_get_pipelined_engine(pdev);
+	if (IS_ERR(eng))
+		return PTR_ERR(eng);
+
+	eng->dev = &pdev->dev;
+	eng->integration = NAND_ECC_ENGINE_INTEGRATION_PIPELINED;
+	eng->ops = &mxic_spi_mem_ecc_engine_pipelined_ops;
+	eng->priv = mxic;
+	mxic->ecc.pipelined_engine = eng;
+	nand_ecc_register_on_host_hw_engine(eng);
+
+	return 0;
+}
+
+static int __maybe_unused mxic_spi_runtime_suspend(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct mxic_spi *mxic = spi_master_get_devdata(master);
+
+	mxic_spi_clk_disable(mxic);
+	clk_disable_unprepare(mxic->ps_clk);
+
+	return 0;
+}
+
+static int __maybe_unused mxic_spi_runtime_resume(struct device *dev)
+{
+	struct spi_master *master = dev_get_drvdata(dev);
+	struct mxic_spi *mxic = spi_master_get_devdata(master);
+	int ret;
+
+	ret = clk_prepare_enable(mxic->ps_clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable ps_clock.\n");
+		return ret;
+	}
+
+	return mxic_spi_clk_enable(mxic);
+}
+
+static const struct dev_pm_ops mxic_spi_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(mxic_spi_runtime_suspend,
+			   mxic_spi_runtime_resume, NULL)
+};
+
+static int mxic_spi_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct resource *res;
+	struct mxic_spi *mxic;
+	int ret;
+
+	master = devm_spi_alloc_master(&pdev->dev, sizeof(struct mxic_spi));
+	if (!master)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, master);
+
+	mxic = spi_master_get_devdata(master);
+	mxic->dev = &pdev->dev;
+
+	master->dev.of_node = pdev->dev.of_node;
+
+	mxic->ps_clk = devm_clk_get(&pdev->dev, "ps_clk");
+	if (IS_ERR(mxic->ps_clk))
+		return PTR_ERR(mxic->ps_clk);
+
+	mxic->send_clk = devm_clk_get(&pdev->dev, "send_clk");
+	if (IS_ERR(mxic->send_clk))
+		return PTR_ERR(mxic->send_clk);
+
+	mxic->send_dly_clk = devm_clk_get(&pdev->dev, "send_dly_clk");
+	if (IS_ERR(mxic->send_dly_clk))
+		return PTR_ERR(mxic->send_dly_clk);
+
+	mxic->regs = devm_platform_ioremap_resource_byname(pdev, "regs");
+	if (IS_ERR(mxic->regs))
+		return PTR_ERR(mxic->regs);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
+	mxic->linear.map = devm_ioremap_resource(&pdev->dev, res);
+	if (!IS_ERR(mxic->linear.map)) {
+		mxic->linear.dma = res->start;
+		mxic->linear.size = resource_size(res);
+	} else {
+		mxic->linear.map = NULL;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	master->auto_runtime_pm = true;
+
+	master->num_chipselect = 1;
+	master->mem_ops = &mxic_spi_mem_ops;
+	master->mem_caps = &mxic_spi_mem_caps;
+
+	master->set_cs = mxic_spi_set_cs;
+	master->transfer_one = mxic_spi_transfer_one;
+	master->bits_per_word_mask = SPI_BPW_MASK(8);
+	master->mode_bits = SPI_CPOL | SPI_CPHA |
+			SPI_RX_DUAL | SPI_TX_DUAL |
+			SPI_RX_QUAD | SPI_TX_QUAD |
+			SPI_RX_OCTAL | SPI_TX_OCTAL;
+
+	mxic_spi_hw_init(mxic);
+
+	ret = mxic_spi_mem_ecc_probe(pdev, mxic);
+	if (ret == -EPROBE_DEFER) {
+		pm_runtime_disable(&pdev->dev);
+		return ret;
+	}
+
+	ret = spi_register_master(master);
+	if (ret) {
+		dev_err(&pdev->dev, "spi_register_master failed\n");
+		pm_runtime_disable(&pdev->dev);
+		mxic_spi_mem_ecc_remove(mxic);
+	}
+
+	return ret;
+}
+
+static int mxic_spi_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct mxic_spi *mxic = spi_master_get_devdata(master);
+
+	pm_runtime_disable(&pdev->dev);
+	mxic_spi_mem_ecc_remove(mxic);
+	spi_unregister_master(master);
+
+	return 0;
+}
+
+static const struct of_device_id mxic_spi_of_ids[] = {
+	{ .compatible = "mxicy,mx25f0a-spi", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxic_spi_of_ids);
+
+static struct platform_driver mxic_spi_driver = {
+	.probe = mxic_spi_probe,
+	.remove = mxic_spi_remove,
+	.driver = {
+		.name = "mxic-spi",
+		.of_match_table = mxic_spi_of_ids,
+		.pm = &mxic_spi_dev_pm_ops,
+	},
+};
+module_platform_driver(mxic_spi_driver);
+
+MODULE_AUTHOR("Mason Yang <masonccyang@mxic.com.tw>");
+MODULE_DESCRIPTION("MX25F0A SPI controller driver");
+MODULE_LICENSE("GPL v2");