Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 669 insertions, 0 deletions

diff --git a/drivers/spi/spi-sprd-adi.c b/drivers/spi/spi-sprd-adi.c
new file mode 100644
index 000000000..1edbf44c0
--- /dev/null
+++ b/drivers/spi/spi-sprd-adi.c
@@ -0,0 +1,669 @@
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/delay.h>
+#include <linux/hwspinlock.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/spi/spi.h>
+#include <linux/sizes.h>
+
+/* Registers definitions for ADI controller */
+#define REG_ADI_CTRL0			0x4
+#define REG_ADI_CHN_PRIL		0x8
+#define REG_ADI_CHN_PRIH		0xc
+#define REG_ADI_INT_EN			0x10
+#define REG_ADI_INT_RAW			0x14
+#define REG_ADI_INT_MASK		0x18
+#define REG_ADI_INT_CLR			0x1c
+#define REG_ADI_GSSI_CFG0		0x20
+#define REG_ADI_GSSI_CFG1		0x24
+#define REG_ADI_RD_CMD			0x28
+#define REG_ADI_RD_DATA			0x2c
+#define REG_ADI_ARM_FIFO_STS		0x30
+#define REG_ADI_STS			0x34
+#define REG_ADI_EVT_FIFO_STS		0x38
+#define REG_ADI_ARM_CMD_STS		0x3c
+#define REG_ADI_CHN_EN			0x40
+#define REG_ADI_CHN_ADDR(id)		(0x44 + (id - 2) * 4)
+#define REG_ADI_CHN_EN1			0x20c
+
+/* Bits definitions for register REG_ADI_GSSI_CFG0 */
+#define BIT_CLK_ALL_ON			BIT(30)
+
+/* Bits definitions for register REG_ADI_RD_DATA */
+#define BIT_RD_CMD_BUSY			BIT(31)
+#define RD_ADDR_SHIFT			16
+#define RD_VALUE_MASK			GENMASK(15, 0)
+#define RD_ADDR_MASK			GENMASK(30, 16)
+
+/* Bits definitions for register REG_ADI_ARM_FIFO_STS */
+#define BIT_FIFO_FULL			BIT(11)
+#define BIT_FIFO_EMPTY			BIT(10)
+
+/*
+ * ADI slave devices include RTC, ADC, regulator, charger, thermal and so on.
+ * ADI supports 12/14bit address for r2p0, and additional 17bit for r3p0 or
+ * later versions. Since bit[1:0] are zero, so the spec describe them as
+ * 10/12/15bit address mode.
+ * The 10bit mode supports sigle slave, 12/15bit mode supports 3 slave, the
+ * high two bits is slave_id.
+ * The slave devices address offset is 0x8000 for 10/12bit address mode,
+ * and 0x20000 for 15bit mode.
+ */
+#define ADI_10BIT_SLAVE_ADDR_SIZE	SZ_4K
+#define ADI_10BIT_SLAVE_OFFSET		0x8000
+#define ADI_12BIT_SLAVE_ADDR_SIZE	SZ_16K
+#define ADI_12BIT_SLAVE_OFFSET		0x8000
+#define ADI_15BIT_SLAVE_ADDR_SIZE	SZ_128K
+#define ADI_15BIT_SLAVE_OFFSET		0x20000
+
+/* Timeout (ms) for the trylock of hardware spinlocks */
+#define ADI_HWSPINLOCK_TIMEOUT		5000
+/*
+ * ADI controller has 50 channels including 2 software channels
+ * and 48 hardware channels.
+ */
+#define ADI_HW_CHNS			50
+
+#define ADI_FIFO_DRAIN_TIMEOUT		1000
+#define ADI_READ_TIMEOUT		2000
+
+/*
+ * Read back address from REG_ADI_RD_DATA bit[30:16] which maps to:
+ * REG_ADI_RD_CMD bit[14:0] for r2p0
+ * REG_ADI_RD_CMD bit[16:2] for r3p0
+ */
+#define RDBACK_ADDR_MASK_R2		GENMASK(14, 0)
+#define RDBACK_ADDR_MASK_R3		GENMASK(16, 2)
+#define RDBACK_ADDR_SHIFT_R3		2
+
+/* Registers definitions for PMIC watchdog controller */
+#define REG_WDG_LOAD_LOW		0x0
+#define REG_WDG_LOAD_HIGH		0x4
+#define REG_WDG_CTRL			0x8
+#define REG_WDG_LOCK			0x20
+
+/* Bits definitions for register REG_WDG_CTRL */
+#define BIT_WDG_RUN			BIT(1)
+#define BIT_WDG_NEW			BIT(2)
+#define BIT_WDG_RST			BIT(3)
+
+/* Bits definitions for register REG_MODULE_EN */
+#define BIT_WDG_EN			BIT(2)
+
+/* Registers definitions for PMIC */
+#define PMIC_RST_STATUS			0xee8
+#define PMIC_MODULE_EN			0xc08
+#define PMIC_CLK_EN			0xc18
+#define PMIC_WDG_BASE			0x80
+
+/* Definition of PMIC reset status register */
+#define HWRST_STATUS_SECURITY		0x02
+#define HWRST_STATUS_RECOVERY		0x20
+#define HWRST_STATUS_NORMAL		0x40
+#define HWRST_STATUS_ALARM		0x50
+#define HWRST_STATUS_SLEEP		0x60
+#define HWRST_STATUS_FASTBOOT		0x30
+#define HWRST_STATUS_SPECIAL		0x70
+#define HWRST_STATUS_PANIC		0x80
+#define HWRST_STATUS_CFTREBOOT		0x90
+#define HWRST_STATUS_AUTODLOADER	0xa0
+#define HWRST_STATUS_IQMODE		0xb0
+#define HWRST_STATUS_SPRDISK		0xc0
+#define HWRST_STATUS_FACTORYTEST	0xe0
+#define HWRST_STATUS_WATCHDOG		0xf0
+
+/* Use default timeout 50 ms that converts to watchdog values */
+#define WDG_LOAD_VAL			((50 * 32768) / 1000)
+#define WDG_LOAD_MASK			GENMASK(15, 0)
+#define WDG_UNLOCK_KEY			0xe551
+
+struct sprd_adi_wdg {
+	u32 base;
+	u32 rst_sts;
+	u32 wdg_en;
+	u32 wdg_clk;
+};
+
+struct sprd_adi_data {
+	u32 slave_offset;
+	u32 slave_addr_size;
+	int (*read_check)(u32 val, u32 reg);
+	int (*restart)(struct notifier_block *this,
+		       unsigned long mode, void *cmd);
+	void (*wdg_rst)(void *p);
+};
+
+struct sprd_adi {
+	struct spi_controller	*ctlr;
+	struct device		*dev;
+	void __iomem		*base;
+	struct hwspinlock	*hwlock;
+	unsigned long		slave_vbase;
+	unsigned long		slave_pbase;
+	struct notifier_block	restart_handler;
+	const struct sprd_adi_data *data;
+};
+
+static int sprd_adi_check_addr(struct sprd_adi *sadi, u32 reg)
+{
+	if (reg >= sadi->data->slave_addr_size) {
+		dev_err(sadi->dev,
+			"slave address offset is incorrect, reg = 0x%x\n",
+			reg);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int sprd_adi_drain_fifo(struct sprd_adi *sadi)
+{
+	u32 timeout = ADI_FIFO_DRAIN_TIMEOUT;
+	u32 sts;
+
+	do {
+		sts = readl_relaxed(sadi->base + REG_ADI_ARM_FIFO_STS);
+		if (sts & BIT_FIFO_EMPTY)
+			break;
+
+		cpu_relax();
+	} while (--timeout);
+
+	if (timeout == 0) {
+		dev_err(sadi->dev, "drain write fifo timeout\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int sprd_adi_fifo_is_full(struct sprd_adi *sadi)
+{
+	return readl_relaxed(sadi->base + REG_ADI_ARM_FIFO_STS) & BIT_FIFO_FULL;
+}
+
+static int sprd_adi_read_check(u32 val, u32 addr)
+{
+	u32 rd_addr;
+
+	rd_addr = (val & RD_ADDR_MASK) >> RD_ADDR_SHIFT;
+
+	if (rd_addr != addr) {
+		pr_err("ADI read error, addr = 0x%x, val = 0x%x\n", addr, val);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int sprd_adi_read_check_r2(u32 val, u32 reg)
+{
+	return sprd_adi_read_check(val, reg & RDBACK_ADDR_MASK_R2);
+}
+
+static int sprd_adi_read_check_r3(u32 val, u32 reg)
+{
+	return sprd_adi_read_check(val, (reg & RDBACK_ADDR_MASK_R3) >> RDBACK_ADDR_SHIFT_R3);
+}
+
+static int sprd_adi_read(struct sprd_adi *sadi, u32 reg, u32 *read_val)
+{
+	int read_timeout = ADI_READ_TIMEOUT;
+	unsigned long flags;
+	u32 val;
+	int ret = 0;
+
+	if (sadi->hwlock) {
+		ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
+						  ADI_HWSPINLOCK_TIMEOUT,
+						  &flags);
+		if (ret) {
+			dev_err(sadi->dev, "get the hw lock failed\n");
+			return ret;
+		}
+	}
+
+	ret = sprd_adi_check_addr(sadi, reg);
+	if (ret)
+		goto out;
+
+	/*
+	 * Set the slave address offset need to read into RD_CMD register,
+	 * then ADI controller will start to transfer automatically.
+	 */
+	writel_relaxed(reg, sadi->base + REG_ADI_RD_CMD);
+
+	/*
+	 * Wait read operation complete, the BIT_RD_CMD_BUSY will be set
+	 * simultaneously when writing read command to register, and the
+	 * BIT_RD_CMD_BUSY will be cleared after the read operation is
+	 * completed.
+	 */
+	do {
+		val = readl_relaxed(sadi->base + REG_ADI_RD_DATA);
+		if (!(val & BIT_RD_CMD_BUSY))
+			break;
+
+		cpu_relax();
+	} while (--read_timeout);
+
+	if (read_timeout == 0) {
+		dev_err(sadi->dev, "ADI read timeout\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	/*
+	 * The return value before adi r5p0 includes data and read register
+	 * address, from bit 0to bit 15 are data, and from bit 16 to bit 30
+	 * are read register address. Then we can check the returned register
+	 * address to validate data.
+	 */
+	if (sadi->data->read_check) {
+		ret = sadi->data->read_check(val, reg);
+		if (ret < 0)
+			goto out;
+	}
+
+	*read_val = val & RD_VALUE_MASK;
+
+out:
+	if (sadi->hwlock)
+		hwspin_unlock_irqrestore(sadi->hwlock, &flags);
+	return ret;
+}
+
+static int sprd_adi_write(struct sprd_adi *sadi, u32 reg, u32 val)
+{
+	u32 timeout = ADI_FIFO_DRAIN_TIMEOUT;
+	unsigned long flags;
+	int ret;
+
+	if (sadi->hwlock) {
+		ret = hwspin_lock_timeout_irqsave(sadi->hwlock,
+						  ADI_HWSPINLOCK_TIMEOUT,
+						  &flags);
+		if (ret) {
+			dev_err(sadi->dev, "get the hw lock failed\n");
+			return ret;
+		}
+	}
+
+	ret = sprd_adi_check_addr(sadi, reg);
+	if (ret)
+		goto out;
+
+	ret = sprd_adi_drain_fifo(sadi);
+	if (ret < 0)
+		goto out;
+
+	/*
+	 * we should wait for write fifo is empty before writing data to PMIC
+	 * registers.
+	 */
+	do {
+		if (!sprd_adi_fifo_is_full(sadi)) {
+			/* we need virtual register address to write. */
+			writel_relaxed(val, (void __iomem *)(sadi->slave_vbase + reg));
+			break;
+		}
+
+		cpu_relax();
+	} while (--timeout);
+
+	if (timeout == 0) {
+		dev_err(sadi->dev, "write fifo is full\n");
+		ret = -EBUSY;
+	}
+
+out:
+	if (sadi->hwlock)
+		hwspin_unlock_irqrestore(sadi->hwlock, &flags);
+	return ret;
+}
+
+static int sprd_adi_transfer_one(struct spi_controller *ctlr,
+				 struct spi_device *spi_dev,
+				 struct spi_transfer *t)
+{
+	struct sprd_adi *sadi = spi_controller_get_devdata(ctlr);
+	u32 reg, val;
+	int ret;
+
+	if (t->rx_buf) {
+		reg = *(u32 *)t->rx_buf;
+		ret = sprd_adi_read(sadi, reg, &val);
+		*(u32 *)t->rx_buf = val;
+	} else if (t->tx_buf) {
+		u32 *p = (u32 *)t->tx_buf;
+		reg = *p++;
+		val = *p;
+		ret = sprd_adi_write(sadi, reg, val);
+	} else {
+		dev_err(sadi->dev, "no buffer for transfer\n");
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void sprd_adi_set_wdt_rst_mode(void *p)
+{
+#if IS_ENABLED(CONFIG_SPRD_WATCHDOG)
+	u32 val;
+	struct sprd_adi *sadi = (struct sprd_adi *)p;
+
+	/* Init watchdog reset mode */
+	sprd_adi_read(sadi, PMIC_RST_STATUS, &val);
+	val |= HWRST_STATUS_WATCHDOG;
+	sprd_adi_write(sadi, PMIC_RST_STATUS, val);
+#endif
+}
+
+static int sprd_adi_restart(struct notifier_block *this, unsigned long mode,
+				  void *cmd, struct sprd_adi_wdg *wdg)
+{
+	struct sprd_adi *sadi = container_of(this, struct sprd_adi,
+					     restart_handler);
+	u32 val, reboot_mode = 0;
+
+	if (!cmd)
+		reboot_mode = HWRST_STATUS_NORMAL;
+	else if (!strncmp(cmd, "recovery", 8))
+		reboot_mode = HWRST_STATUS_RECOVERY;
+	else if (!strncmp(cmd, "alarm", 5))
+		reboot_mode = HWRST_STATUS_ALARM;
+	else if (!strncmp(cmd, "fastsleep", 9))
+		reboot_mode = HWRST_STATUS_SLEEP;
+	else if (!strncmp(cmd, "bootloader", 10))
+		reboot_mode = HWRST_STATUS_FASTBOOT;
+	else if (!strncmp(cmd, "panic", 5))
+		reboot_mode = HWRST_STATUS_PANIC;
+	else if (!strncmp(cmd, "special", 7))
+		reboot_mode = HWRST_STATUS_SPECIAL;
+	else if (!strncmp(cmd, "cftreboot", 9))
+		reboot_mode = HWRST_STATUS_CFTREBOOT;
+	else if (!strncmp(cmd, "autodloader", 11))
+		reboot_mode = HWRST_STATUS_AUTODLOADER;
+	else if (!strncmp(cmd, "iqmode", 6))
+		reboot_mode = HWRST_STATUS_IQMODE;
+	else if (!strncmp(cmd, "sprdisk", 7))
+		reboot_mode = HWRST_STATUS_SPRDISK;
+	else if (!strncmp(cmd, "tospanic", 8))
+		reboot_mode = HWRST_STATUS_SECURITY;
+	else if (!strncmp(cmd, "factorytest", 11))
+		reboot_mode = HWRST_STATUS_FACTORYTEST;
+	else
+		reboot_mode = HWRST_STATUS_NORMAL;
+
+	/* Record the reboot mode */
+	sprd_adi_read(sadi, wdg->rst_sts, &val);
+	val &= ~HWRST_STATUS_WATCHDOG;
+	val |= reboot_mode;
+	sprd_adi_write(sadi, wdg->rst_sts, val);
+
+	/* Enable the interface clock of the watchdog */
+	sprd_adi_read(sadi, wdg->wdg_en, &val);
+	val |= BIT_WDG_EN;
+	sprd_adi_write(sadi, wdg->wdg_en, val);
+
+	/* Enable the work clock of the watchdog */
+	sprd_adi_read(sadi, wdg->wdg_clk, &val);
+	val |= BIT_WDG_EN;
+	sprd_adi_write(sadi, wdg->wdg_clk, val);
+
+	/* Unlock the watchdog */
+	sprd_adi_write(sadi, wdg->base + REG_WDG_LOCK, WDG_UNLOCK_KEY);
+
+	sprd_adi_read(sadi, wdg->base + REG_WDG_CTRL, &val);
+	val |= BIT_WDG_NEW;
+	sprd_adi_write(sadi, wdg->base + REG_WDG_CTRL, val);
+
+	/* Load the watchdog timeout value, 50ms is always enough. */
+	sprd_adi_write(sadi, wdg->base + REG_WDG_LOAD_HIGH, 0);
+	sprd_adi_write(sadi, wdg->base + REG_WDG_LOAD_LOW,
+		       WDG_LOAD_VAL & WDG_LOAD_MASK);
+
+	/* Start the watchdog to reset system */
+	sprd_adi_read(sadi, wdg->base + REG_WDG_CTRL, &val);
+	val |= BIT_WDG_RUN | BIT_WDG_RST;
+	sprd_adi_write(sadi, wdg->base + REG_WDG_CTRL, val);
+
+	/* Lock the watchdog */
+	sprd_adi_write(sadi, wdg->base + REG_WDG_LOCK, ~WDG_UNLOCK_KEY);
+
+	mdelay(1000);
+
+	dev_emerg(sadi->dev, "Unable to restart system\n");
+	return NOTIFY_DONE;
+}
+
+static int sprd_adi_restart_sc9860(struct notifier_block *this,
+					   unsigned long mode, void *cmd)
+{
+	struct sprd_adi_wdg wdg = {
+		.base = PMIC_WDG_BASE,
+		.rst_sts = PMIC_RST_STATUS,
+		.wdg_en = PMIC_MODULE_EN,
+		.wdg_clk = PMIC_CLK_EN,
+	};
+
+	return sprd_adi_restart(this, mode, cmd, &wdg);
+}
+
+static void sprd_adi_hw_init(struct sprd_adi *sadi)
+{
+	struct device_node *np = sadi->dev->of_node;
+	int i, size, chn_cnt;
+	const __be32 *list;
+	u32 tmp;
+
+	/* Set all channels as default priority */
+	writel_relaxed(0, sadi->base + REG_ADI_CHN_PRIL);
+	writel_relaxed(0, sadi->base + REG_ADI_CHN_PRIH);
+
+	/* Set clock auto gate mode */
+	tmp = readl_relaxed(sadi->base + REG_ADI_GSSI_CFG0);
+	tmp &= ~BIT_CLK_ALL_ON;
+	writel_relaxed(tmp, sadi->base + REG_ADI_GSSI_CFG0);
+
+	/* Set hardware channels setting */
+	list = of_get_property(np, "sprd,hw-channels", &size);
+	if (!list || !size) {
+		dev_info(sadi->dev, "no hw channels setting in node\n");
+		return;
+	}
+
+	chn_cnt = size / 8;
+	for (i = 0; i < chn_cnt; i++) {
+		u32 value;
+		u32 chn_id = be32_to_cpu(*list++);
+		u32 chn_config = be32_to_cpu(*list++);
+
+		/* Channel 0 and 1 are software channels */
+		if (chn_id < 2)
+			continue;
+
+		writel_relaxed(chn_config, sadi->base +
+			       REG_ADI_CHN_ADDR(chn_id));
+
+		if (chn_id < 32) {
+			value = readl_relaxed(sadi->base + REG_ADI_CHN_EN);
+			value |= BIT(chn_id);
+			writel_relaxed(value, sadi->base + REG_ADI_CHN_EN);
+		} else if (chn_id < ADI_HW_CHNS) {
+			value = readl_relaxed(sadi->base + REG_ADI_CHN_EN1);
+			value |= BIT(chn_id - 32);
+			writel_relaxed(value, sadi->base + REG_ADI_CHN_EN1);
+		}
+	}
+}
+
+static int sprd_adi_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct sprd_adi_data *data;
+	struct spi_controller *ctlr;
+	struct sprd_adi *sadi;
+	struct resource *res;
+	u16 num_chipselect;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "can not find the adi bus node\n");
+		return -ENODEV;
+	}
+
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data) {
+		dev_err(&pdev->dev, "no matching driver data found\n");
+		return -EINVAL;
+	}
+
+	pdev->id = of_alias_get_id(np, "spi");
+	num_chipselect = of_get_child_count(np);
+
+	ctlr = spi_alloc_master(&pdev->dev, sizeof(struct sprd_adi));
+	if (!ctlr)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, ctlr);
+	sadi = spi_controller_get_devdata(ctlr);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sadi->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(sadi->base)) {
+		ret = PTR_ERR(sadi->base);
+		goto put_ctlr;
+	}
+
+	sadi->slave_vbase = (unsigned long)sadi->base +
+			    data->slave_offset;
+	sadi->slave_pbase = res->start + data->slave_offset;
+	sadi->ctlr = ctlr;
+	sadi->dev = &pdev->dev;
+	sadi->data = data;
+	ret = of_hwspin_lock_get_id(np, 0);
+	if (ret > 0 || (IS_ENABLED(CONFIG_HWSPINLOCK) && ret == 0)) {
+		sadi->hwlock =
+			devm_hwspin_lock_request_specific(&pdev->dev, ret);
+		if (!sadi->hwlock) {
+			ret = -ENXIO;
+			goto put_ctlr;
+		}
+	} else {
+		switch (ret) {
+		case -ENOENT:
+			dev_info(&pdev->dev, "no hardware spinlock supplied\n");
+			break;
+		default:
+			dev_err_probe(&pdev->dev, ret, "failed to find hwlock id\n");
+			goto put_ctlr;
+		}
+	}
+
+	sprd_adi_hw_init(sadi);
+
+	if (sadi->data->wdg_rst)
+		sadi->data->wdg_rst(sadi);
+
+	ctlr->dev.of_node = pdev->dev.of_node;
+	ctlr->bus_num = pdev->id;
+	ctlr->num_chipselect = num_chipselect;
+	ctlr->flags = SPI_MASTER_HALF_DUPLEX;
+	ctlr->bits_per_word_mask = 0;
+	ctlr->transfer_one = sprd_adi_transfer_one;
+
+	ret = devm_spi_register_controller(&pdev->dev, ctlr);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register SPI controller\n");
+		goto put_ctlr;
+	}
+
+	if (sadi->data->restart) {
+		sadi->restart_handler.notifier_call = sadi->data->restart;
+		sadi->restart_handler.priority = 128;
+		ret = register_restart_handler(&sadi->restart_handler);
+		if (ret) {
+			dev_err(&pdev->dev, "can not register restart handler\n");
+			goto put_ctlr;
+		}
+	}
+
+	return 0;
+
+put_ctlr:
+	spi_controller_put(ctlr);
+	return ret;
+}
+
+static int sprd_adi_remove(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr = dev_get_drvdata(&pdev->dev);
+	struct sprd_adi *sadi = spi_controller_get_devdata(ctlr);
+
+	unregister_restart_handler(&sadi->restart_handler);
+	return 0;
+}
+
+static struct sprd_adi_data sc9860_data = {
+	.slave_offset = ADI_10BIT_SLAVE_OFFSET,
+	.slave_addr_size = ADI_10BIT_SLAVE_ADDR_SIZE,
+	.read_check = sprd_adi_read_check_r2,
+	.restart = sprd_adi_restart_sc9860,
+	.wdg_rst = sprd_adi_set_wdt_rst_mode,
+};
+
+static struct sprd_adi_data sc9863_data = {
+	.slave_offset = ADI_12BIT_SLAVE_OFFSET,
+	.slave_addr_size = ADI_12BIT_SLAVE_ADDR_SIZE,
+	.read_check = sprd_adi_read_check_r3,
+};
+
+static struct sprd_adi_data ums512_data = {
+	.slave_offset = ADI_15BIT_SLAVE_OFFSET,
+	.slave_addr_size = ADI_15BIT_SLAVE_ADDR_SIZE,
+	.read_check = sprd_adi_read_check_r3,
+};
+
+static const struct of_device_id sprd_adi_of_match[] = {
+	{
+		.compatible = "sprd,sc9860-adi",
+		.data = &sc9860_data,
+	},
+	{
+		.compatible = "sprd,sc9863-adi",
+		.data = &sc9863_data,
+	},
+	{
+		.compatible = "sprd,ums512-adi",
+		.data = &ums512_data,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sprd_adi_of_match);
+
+static struct platform_driver sprd_adi_driver = {
+	.driver = {
+		.name = "sprd-adi",
+		.of_match_table = sprd_adi_of_match,
+	},
+	.probe = sprd_adi_probe,
+	.remove = sprd_adi_remove,
+};
+module_platform_driver(sprd_adi_driver);
+
+MODULE_DESCRIPTION("Spreadtrum ADI Controller Driver");
+MODULE_AUTHOR("Baolin Wang <Baolin.Wang@spreadtrum.com>");
+MODULE_LICENSE("GPL v2");