Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 508 insertions, 0 deletions

diff --git a/drivers/spi/spi-wpcm-fiu.c b/drivers/spi/spi-wpcm-fiu.c
new file mode 100644
index 000000000..ab33710d5
--- /dev/null
+++ b/drivers/spi/spi-wpcm-fiu.c
@@ -0,0 +1,508 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2022 Jonathan Neuschäfer
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi-mem.h>
+
+#define FIU_CFG		0x00
+#define FIU_BURST_BFG	0x01
+#define FIU_RESP_CFG	0x02
+#define FIU_CFBB_PROT	0x03
+#define FIU_FWIN1_LOW	0x04
+#define FIU_FWIN1_HIGH	0x06
+#define FIU_FWIN2_LOW	0x08
+#define FIU_FWIN2_HIGH	0x0a
+#define FIU_FWIN3_LOW	0x0c
+#define FIU_FWIN3_HIGH	0x0e
+#define FIU_PROT_LOCK	0x10
+#define FIU_PROT_CLEAR	0x11
+#define FIU_SPI_FL_CFG	0x14
+#define FIU_UMA_CODE	0x16
+#define FIU_UMA_AB0	0x17
+#define FIU_UMA_AB1	0x18
+#define FIU_UMA_AB2	0x19
+#define FIU_UMA_DB0	0x1a
+#define FIU_UMA_DB1	0x1b
+#define FIU_UMA_DB2	0x1c
+#define FIU_UMA_DB3	0x1d
+#define FIU_UMA_CTS	0x1e
+#define FIU_UMA_ECTS	0x1f
+
+#define FIU_BURST_CFG_R16	3
+
+#define FIU_UMA_CTS_D_SIZE(x)	(x)
+#define FIU_UMA_CTS_A_SIZE	BIT(3)
+#define FIU_UMA_CTS_WR		BIT(4)
+#define FIU_UMA_CTS_CS(x)	((x) << 5)
+#define FIU_UMA_CTS_EXEC_DONE	BIT(7)
+
+#define SHM_FLASH_SIZE	0x02
+#define SHM_FLASH_SIZE_STALL_HOST BIT(6)
+
+/*
+ * I observed a typical wait time of 16 iterations for a UMA transfer to
+ * finish, so this should be a safe limit.
+ */
+#define UMA_WAIT_ITERATIONS 100
+
+/* The memory-mapped view of flash is 16 MiB long */
+#define MAX_MEMORY_SIZE_PER_CS	(16 << 20)
+#define MAX_MEMORY_SIZE_TOTAL	(4 * MAX_MEMORY_SIZE_PER_CS)
+
+struct wpcm_fiu_spi {
+	struct device *dev;
+	struct clk *clk;
+	void __iomem *regs;
+	void __iomem *memory;
+	size_t memory_size;
+	struct regmap *shm_regmap;
+};
+
+static void wpcm_fiu_set_opcode(struct wpcm_fiu_spi *fiu, u8 opcode)
+{
+	writeb(opcode, fiu->regs + FIU_UMA_CODE);
+}
+
+static void wpcm_fiu_set_addr(struct wpcm_fiu_spi *fiu, u32 addr)
+{
+	writeb((addr >>  0) & 0xff, fiu->regs + FIU_UMA_AB0);
+	writeb((addr >>  8) & 0xff, fiu->regs + FIU_UMA_AB1);
+	writeb((addr >> 16) & 0xff, fiu->regs + FIU_UMA_AB2);
+}
+
+static void wpcm_fiu_set_data(struct wpcm_fiu_spi *fiu, const u8 *data, unsigned int nbytes)
+{
+	int i;
+
+	for (i = 0; i < nbytes; i++)
+		writeb(data[i], fiu->regs + FIU_UMA_DB0 + i);
+}
+
+static void wpcm_fiu_get_data(struct wpcm_fiu_spi *fiu, u8 *data, unsigned int nbytes)
+{
+	int i;
+
+	for (i = 0; i < nbytes; i++)
+		data[i] = readb(fiu->regs + FIU_UMA_DB0 + i);
+}
+
+/*
+ * Perform a UMA (User Mode Access) operation, i.e. a software-controlled SPI transfer.
+ */
+static int wpcm_fiu_do_uma(struct wpcm_fiu_spi *fiu, unsigned int cs,
+			   bool use_addr, bool write, int data_bytes)
+{
+	int i = 0;
+	u8 cts = FIU_UMA_CTS_EXEC_DONE | FIU_UMA_CTS_CS(cs);
+
+	if (use_addr)
+		cts |= FIU_UMA_CTS_A_SIZE;
+	if (write)
+		cts |= FIU_UMA_CTS_WR;
+	cts |= FIU_UMA_CTS_D_SIZE(data_bytes);
+
+	writeb(cts, fiu->regs + FIU_UMA_CTS);
+
+	for (i = 0; i < UMA_WAIT_ITERATIONS; i++)
+		if (!(readb(fiu->regs + FIU_UMA_CTS) & FIU_UMA_CTS_EXEC_DONE))
+			return 0;
+
+	dev_info(fiu->dev, "UMA transfer has not finished in %d iterations\n", UMA_WAIT_ITERATIONS);
+	return -EIO;
+}
+
+static void wpcm_fiu_ects_assert(struct wpcm_fiu_spi *fiu, unsigned int cs)
+{
+	u8 ects = readb(fiu->regs + FIU_UMA_ECTS);
+
+	ects &= ~BIT(cs);
+	writeb(ects, fiu->regs + FIU_UMA_ECTS);
+}
+
+static void wpcm_fiu_ects_deassert(struct wpcm_fiu_spi *fiu, unsigned int cs)
+{
+	u8 ects = readb(fiu->regs + FIU_UMA_ECTS);
+
+	ects |= BIT(cs);
+	writeb(ects, fiu->regs + FIU_UMA_ECTS);
+}
+
+struct wpcm_fiu_op_shape {
+	bool (*match)(const struct spi_mem_op *op);
+	int (*exec)(struct spi_mem *mem, const struct spi_mem_op *op);
+};
+
+static bool wpcm_fiu_normal_match(const struct spi_mem_op *op)
+{
+	// Opcode 0x0b (FAST READ) is treated differently in hardware
+	if (op->cmd.opcode == 0x0b)
+		return false;
+
+	return (op->addr.nbytes == 0 || op->addr.nbytes == 3) &&
+	       op->dummy.nbytes == 0 && op->data.nbytes <= 4;
+}
+
+static int wpcm_fiu_normal_exec(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(mem->spi->controller);
+	int ret;
+
+	wpcm_fiu_set_opcode(fiu, op->cmd.opcode);
+	wpcm_fiu_set_addr(fiu, op->addr.val);
+	if (op->data.dir == SPI_MEM_DATA_OUT)
+		wpcm_fiu_set_data(fiu, op->data.buf.out, op->data.nbytes);
+
+	ret = wpcm_fiu_do_uma(fiu, mem->spi->chip_select, op->addr.nbytes == 3,
+			      op->data.dir == SPI_MEM_DATA_OUT, op->data.nbytes);
+
+	if (op->data.dir == SPI_MEM_DATA_IN)
+		wpcm_fiu_get_data(fiu, op->data.buf.in, op->data.nbytes);
+
+	return ret;
+}
+
+static bool wpcm_fiu_fast_read_match(const struct spi_mem_op *op)
+{
+	return op->cmd.opcode == 0x0b && op->addr.nbytes == 3 &&
+	       op->dummy.nbytes == 1 &&
+	       op->data.nbytes >= 1 && op->data.nbytes <= 4 &&
+	       op->data.dir == SPI_MEM_DATA_IN;
+}
+
+static int wpcm_fiu_fast_read_exec(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	return -EINVAL;
+}
+
+/*
+ * 4-byte addressing.
+ *
+ * Flash view:  [ C  A  A  A   A     D  D  D  D]
+ * bytes:        13 aa bb cc  dd -> 5a a5 f0 0f
+ * FIU's view:  [ C  A  A  A][ C     D  D  D  D]
+ * FIU mode:    [ read/write][      read       ]
+ */
+static bool wpcm_fiu_4ba_match(const struct spi_mem_op *op)
+{
+	return op->addr.nbytes == 4 && op->dummy.nbytes == 0 && op->data.nbytes <= 4;
+}
+
+static int wpcm_fiu_4ba_exec(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(mem->spi->controller);
+	int cs = mem->spi->chip_select;
+
+	wpcm_fiu_ects_assert(fiu, cs);
+
+	wpcm_fiu_set_opcode(fiu, op->cmd.opcode);
+	wpcm_fiu_set_addr(fiu, op->addr.val >> 8);
+	wpcm_fiu_do_uma(fiu, cs, true, false, 0);
+
+	wpcm_fiu_set_opcode(fiu, op->addr.val & 0xff);
+	wpcm_fiu_set_addr(fiu, 0);
+	if (op->data.dir == SPI_MEM_DATA_OUT)
+		wpcm_fiu_set_data(fiu, op->data.buf.out, op->data.nbytes);
+	wpcm_fiu_do_uma(fiu, cs, false, op->data.dir == SPI_MEM_DATA_OUT, op->data.nbytes);
+
+	wpcm_fiu_ects_deassert(fiu, cs);
+
+	if (op->data.dir == SPI_MEM_DATA_IN)
+		wpcm_fiu_get_data(fiu, op->data.buf.in, op->data.nbytes);
+
+	return 0;
+}
+
+/*
+ * RDID (Read Identification) needs special handling because Linux expects to
+ * be able to read 6 ID bytes and FIU can only read up to 4 at once.
+ *
+ * We're lucky in this case, because executing the RDID instruction twice will
+ * result in the same result.
+ *
+ * What we do is as follows (C: write command/opcode byte, D: read data byte,
+ * A: write address byte):
+ *
+ *  1. C D D D
+ *  2. C A A A D D D
+ */
+static bool wpcm_fiu_rdid_match(const struct spi_mem_op *op)
+{
+	return op->cmd.opcode == 0x9f && op->addr.nbytes == 0 &&
+	       op->dummy.nbytes == 0 && op->data.nbytes == 6 &&
+	       op->data.dir == SPI_MEM_DATA_IN;
+}
+
+static int wpcm_fiu_rdid_exec(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(mem->spi->controller);
+	int cs = mem->spi->chip_select;
+
+	/* First transfer */
+	wpcm_fiu_set_opcode(fiu, op->cmd.opcode);
+	wpcm_fiu_set_addr(fiu, 0);
+	wpcm_fiu_do_uma(fiu, cs, false, false, 3);
+	wpcm_fiu_get_data(fiu, op->data.buf.in, 3);
+
+	/* Second transfer */
+	wpcm_fiu_set_opcode(fiu, op->cmd.opcode);
+	wpcm_fiu_set_addr(fiu, 0);
+	wpcm_fiu_do_uma(fiu, cs, true, false, 3);
+	wpcm_fiu_get_data(fiu, op->data.buf.in + 3, 3);
+
+	return 0;
+}
+
+/*
+ * With some dummy bytes.
+ *
+ *  C A A A  X*  X D D D D
+ * [C A A A  D*][C D D D D]
+ */
+static bool wpcm_fiu_dummy_match(const struct spi_mem_op *op)
+{
+	// Opcode 0x0b (FAST READ) is treated differently in hardware
+	if (op->cmd.opcode == 0x0b)
+		return false;
+
+	return (op->addr.nbytes == 0 || op->addr.nbytes == 3) &&
+	       op->dummy.nbytes >= 1 && op->dummy.nbytes <= 5 &&
+	       op->data.nbytes <= 4;
+}
+
+static int wpcm_fiu_dummy_exec(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(mem->spi->controller);
+	int cs = mem->spi->chip_select;
+
+	wpcm_fiu_ects_assert(fiu, cs);
+
+	/* First transfer */
+	wpcm_fiu_set_opcode(fiu, op->cmd.opcode);
+	wpcm_fiu_set_addr(fiu, op->addr.val);
+	wpcm_fiu_do_uma(fiu, cs, op->addr.nbytes != 0, true, op->dummy.nbytes - 1);
+
+	/* Second transfer */
+	wpcm_fiu_set_opcode(fiu, 0);
+	wpcm_fiu_set_addr(fiu, 0);
+	wpcm_fiu_do_uma(fiu, cs, false, false, op->data.nbytes);
+	wpcm_fiu_get_data(fiu, op->data.buf.in, op->data.nbytes);
+
+	wpcm_fiu_ects_deassert(fiu, cs);
+
+	return 0;
+}
+
+static const struct wpcm_fiu_op_shape wpcm_fiu_op_shapes[] = {
+	{ .match = wpcm_fiu_normal_match, .exec = wpcm_fiu_normal_exec },
+	{ .match = wpcm_fiu_fast_read_match, .exec = wpcm_fiu_fast_read_exec },
+	{ .match = wpcm_fiu_4ba_match, .exec = wpcm_fiu_4ba_exec },
+	{ .match = wpcm_fiu_rdid_match, .exec = wpcm_fiu_rdid_exec },
+	{ .match = wpcm_fiu_dummy_match, .exec = wpcm_fiu_dummy_exec },
+};
+
+static const struct wpcm_fiu_op_shape *wpcm_fiu_find_op_shape(const struct spi_mem_op *op)
+{
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE(wpcm_fiu_op_shapes); i++) {
+		const struct wpcm_fiu_op_shape *shape = &wpcm_fiu_op_shapes[i];
+
+		if (shape->match(op))
+			return shape;
+	}
+
+	return NULL;
+}
+
+static bool wpcm_fiu_supports_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	if (!spi_mem_default_supports_op(mem, op))
+		return false;
+
+	if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
+		return false;
+
+	if (op->cmd.buswidth > 1 || op->addr.buswidth > 1 ||
+	    op->dummy.buswidth > 1 || op->data.buswidth > 1)
+		return false;
+
+	return wpcm_fiu_find_op_shape(op) != NULL;
+}
+
+/*
+ * In order to ensure the integrity of SPI transfers performed via UMA,
+ * temporarily disable (stall) memory accesses coming from the host CPU.
+ */
+static void wpcm_fiu_stall_host(struct wpcm_fiu_spi *fiu, bool stall)
+{
+	if (fiu->shm_regmap) {
+		int res = regmap_update_bits(fiu->shm_regmap, SHM_FLASH_SIZE,
+					     SHM_FLASH_SIZE_STALL_HOST,
+					     stall ? SHM_FLASH_SIZE_STALL_HOST : 0);
+		if (res)
+			dev_warn(fiu->dev, "Failed to (un)stall host memory accesses: %d\n", res);
+	}
+}
+
+static int wpcm_fiu_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+	struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(mem->spi->controller);
+	const struct wpcm_fiu_op_shape *shape = wpcm_fiu_find_op_shape(op);
+
+	wpcm_fiu_stall_host(fiu, true);
+
+	if (shape)
+		return shape->exec(mem, op);
+
+	wpcm_fiu_stall_host(fiu, false);
+
+	return -ENOTSUPP;
+}
+
+static int wpcm_fiu_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
+{
+	if (op->data.nbytes > 4)
+		op->data.nbytes = 4;
+
+	return 0;
+}
+
+static int wpcm_fiu_dirmap_create(struct spi_mem_dirmap_desc *desc)
+{
+	struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(desc->mem->spi->controller);
+	int cs = desc->mem->spi->chip_select;
+
+	if (desc->info.op_tmpl.data.dir != SPI_MEM_DATA_IN)
+		return -ENOTSUPP;
+
+	/*
+	 * Unfortunately, FIU only supports a 16 MiB direct mapping window (per
+	 * attached flash chip), but the SPI MEM core doesn't support partial
+	 * direct mappings. This means that we can't support direct mapping on
+	 * flashes that are bigger than 16 MiB.
+	 */
+	if (desc->info.offset + desc->info.length > MAX_MEMORY_SIZE_PER_CS)
+		return -ENOTSUPP;
+
+	/* Don't read past the memory window */
+	if (cs * MAX_MEMORY_SIZE_PER_CS + desc->info.offset + desc->info.length > fiu->memory_size)
+		return -ENOTSUPP;
+
+	return 0;
+}
+
+static ssize_t wpcm_fiu_direct_read(struct spi_mem_dirmap_desc *desc, u64 offs, size_t len, void *buf)
+{
+	struct wpcm_fiu_spi *fiu = spi_controller_get_devdata(desc->mem->spi->controller);
+	int cs = desc->mem->spi->chip_select;
+
+	if (offs >= MAX_MEMORY_SIZE_PER_CS)
+		return -ENOTSUPP;
+
+	offs += cs * MAX_MEMORY_SIZE_PER_CS;
+
+	if (!fiu->memory || offs >= fiu->memory_size)
+		return -ENOTSUPP;
+
+	len = min_t(size_t, len, fiu->memory_size - offs);
+	memcpy_fromio(buf, fiu->memory + offs, len);
+
+	return len;
+}
+
+static const struct spi_controller_mem_ops wpcm_fiu_mem_ops = {
+	.adjust_op_size = wpcm_fiu_adjust_op_size,
+	.supports_op = wpcm_fiu_supports_op,
+	.exec_op = wpcm_fiu_exec_op,
+	.dirmap_create = wpcm_fiu_dirmap_create,
+	.dirmap_read = wpcm_fiu_direct_read,
+};
+
+static void wpcm_fiu_hw_init(struct wpcm_fiu_spi *fiu)
+{
+	/* Configure memory-mapped flash access */
+	writeb(FIU_BURST_CFG_R16, fiu->regs + FIU_BURST_BFG);
+	writeb(MAX_MEMORY_SIZE_TOTAL / (512 << 10), fiu->regs + FIU_CFG);
+	writeb(MAX_MEMORY_SIZE_PER_CS / (512 << 10) | BIT(6), fiu->regs + FIU_SPI_FL_CFG);
+
+	/* Deassert all manually asserted chip selects */
+	writeb(0x0f, fiu->regs + FIU_UMA_ECTS);
+}
+
+static int wpcm_fiu_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct spi_controller *ctrl;
+	struct wpcm_fiu_spi *fiu;
+	struct resource *res;
+
+	ctrl = devm_spi_alloc_master(dev, sizeof(*fiu));
+	if (!ctrl)
+		return -ENOMEM;
+
+	fiu = spi_controller_get_devdata(ctrl);
+	fiu->dev = dev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control");
+	fiu->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(fiu->regs)) {
+		dev_err(dev, "Failed to map registers\n");
+		return PTR_ERR(fiu->regs);
+	}
+
+	fiu->clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(fiu->clk))
+		return PTR_ERR(fiu->clk);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "memory");
+	fiu->memory = devm_ioremap_resource(dev, res);
+	fiu->memory_size = min_t(size_t, resource_size(res), MAX_MEMORY_SIZE_TOTAL);
+	if (IS_ERR(fiu->memory)) {
+		dev_err(dev, "Failed to map flash memory window\n");
+		return PTR_ERR(fiu->memory);
+	}
+
+	fiu->shm_regmap = syscon_regmap_lookup_by_phandle_optional(dev->of_node, "nuvoton,shm");
+
+	wpcm_fiu_hw_init(fiu);
+
+	ctrl->bus_num = -1;
+	ctrl->mem_ops = &wpcm_fiu_mem_ops;
+	ctrl->num_chipselect = 4;
+	ctrl->dev.of_node = dev->of_node;
+
+	/*
+	 * The FIU doesn't include a clock divider, the clock is entirely
+	 * determined by the AHB3 bus clock.
+	 */
+	ctrl->min_speed_hz = clk_get_rate(fiu->clk);
+	ctrl->max_speed_hz = clk_get_rate(fiu->clk);
+
+	return devm_spi_register_controller(dev, ctrl);
+}
+
+static const struct of_device_id wpcm_fiu_dt_ids[] = {
+	{ .compatible = "nuvoton,wpcm450-fiu", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, wpcm_fiu_dt_ids);
+
+static struct platform_driver wpcm_fiu_driver = {
+	.driver = {
+		.name	= "wpcm450-fiu",
+		.bus	= &platform_bus_type,
+		.of_match_table = wpcm_fiu_dt_ids,
+	},
+	.probe      = wpcm_fiu_probe,
+};
+module_platform_driver(wpcm_fiu_driver);
+
+MODULE_DESCRIPTION("Nuvoton WPCM450 FIU SPI controller driver");
+MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
+MODULE_LICENSE("GPL");