Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 250 insertions, 0 deletions

diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c
new file mode 100644
index 000000000..8628241ec
--- /dev/null
+++ b/drivers/spi/spi-xcomm.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Analog Devices AD-FMCOMMS1-EBZ board I2C-SPI bridge driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <asm/unaligned.h>
+
+#define SPI_XCOMM_SETTINGS_LEN_OFFSET		10
+#define SPI_XCOMM_SETTINGS_3WIRE		BIT(6)
+#define SPI_XCOMM_SETTINGS_CS_HIGH		BIT(5)
+#define SPI_XCOMM_SETTINGS_SAMPLE_END		BIT(4)
+#define SPI_XCOMM_SETTINGS_CPHA			BIT(3)
+#define SPI_XCOMM_SETTINGS_CPOL			BIT(2)
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_MASK	0x3
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_64		0x2
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_16		0x1
+#define SPI_XCOMM_SETTINGS_CLOCK_DIV_4		0x0
+
+#define SPI_XCOMM_CMD_UPDATE_CONFIG	0x03
+#define SPI_XCOMM_CMD_WRITE		0x04
+
+#define SPI_XCOMM_CLOCK 48000000
+
+struct spi_xcomm {
+	struct i2c_client *i2c;
+
+	uint16_t settings;
+	uint16_t chipselect;
+
+	unsigned int current_speed;
+
+	uint8_t buf[63];
+};
+
+static int spi_xcomm_sync_config(struct spi_xcomm *spi_xcomm, unsigned int len)
+{
+	uint16_t settings;
+	uint8_t *buf = spi_xcomm->buf;
+
+	settings = spi_xcomm->settings;
+	settings |= len << SPI_XCOMM_SETTINGS_LEN_OFFSET;
+
+	buf[0] = SPI_XCOMM_CMD_UPDATE_CONFIG;
+	put_unaligned_be16(settings, &buf[1]);
+	put_unaligned_be16(spi_xcomm->chipselect, &buf[3]);
+
+	return i2c_master_send(spi_xcomm->i2c, buf, 5);
+}
+
+static void spi_xcomm_chipselect(struct spi_xcomm *spi_xcomm,
+	struct spi_device *spi, int is_active)
+{
+	unsigned long cs = spi->chip_select;
+	uint16_t chipselect = spi_xcomm->chipselect;
+
+	if (is_active)
+		chipselect |= BIT(cs);
+	else
+		chipselect &= ~BIT(cs);
+
+	spi_xcomm->chipselect = chipselect;
+}
+
+static int spi_xcomm_setup_transfer(struct spi_xcomm *spi_xcomm,
+	struct spi_device *spi, struct spi_transfer *t, unsigned int *settings)
+{
+	if (t->len > 62)
+		return -EINVAL;
+
+	if (t->speed_hz != spi_xcomm->current_speed) {
+		unsigned int divider;
+
+		divider = DIV_ROUND_UP(SPI_XCOMM_CLOCK, t->speed_hz);
+		if (divider >= 64)
+			*settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_64;
+		else if (divider >= 16)
+			*settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_16;
+		else
+			*settings |= SPI_XCOMM_SETTINGS_CLOCK_DIV_4;
+
+		spi_xcomm->current_speed = t->speed_hz;
+	}
+
+	if (spi->mode & SPI_CPOL)
+		*settings |= SPI_XCOMM_SETTINGS_CPOL;
+	else
+		*settings &= ~SPI_XCOMM_SETTINGS_CPOL;
+
+	if (spi->mode & SPI_CPHA)
+		*settings &= ~SPI_XCOMM_SETTINGS_CPHA;
+	else
+		*settings |= SPI_XCOMM_SETTINGS_CPHA;
+
+	if (spi->mode & SPI_3WIRE)
+		*settings |= SPI_XCOMM_SETTINGS_3WIRE;
+	else
+		*settings &= ~SPI_XCOMM_SETTINGS_3WIRE;
+
+	return 0;
+}
+
+static int spi_xcomm_txrx_bufs(struct spi_xcomm *spi_xcomm,
+	struct spi_device *spi, struct spi_transfer *t)
+{
+	int ret;
+
+	if (t->tx_buf) {
+		spi_xcomm->buf[0] = SPI_XCOMM_CMD_WRITE;
+		memcpy(spi_xcomm->buf + 1, t->tx_buf, t->len);
+
+		ret = i2c_master_send(spi_xcomm->i2c, spi_xcomm->buf, t->len + 1);
+		if (ret < 0)
+			return ret;
+		else if (ret != t->len + 1)
+			return -EIO;
+	} else if (t->rx_buf) {
+		ret = i2c_master_recv(spi_xcomm->i2c, t->rx_buf, t->len);
+		if (ret < 0)
+			return ret;
+		else if (ret != t->len)
+			return -EIO;
+	}
+
+	return t->len;
+}
+
+static int spi_xcomm_transfer_one(struct spi_master *master,
+	struct spi_message *msg)
+{
+	struct spi_xcomm *spi_xcomm = spi_master_get_devdata(master);
+	unsigned int settings = spi_xcomm->settings;
+	struct spi_device *spi = msg->spi;
+	unsigned cs_change = 0;
+	struct spi_transfer *t;
+	bool is_first = true;
+	int status = 0;
+	bool is_last;
+
+	spi_xcomm_chipselect(spi_xcomm, spi, true);
+
+	list_for_each_entry(t, &msg->transfers, transfer_list) {
+
+		if (!t->tx_buf && !t->rx_buf && t->len) {
+			status = -EINVAL;
+			break;
+		}
+
+		status = spi_xcomm_setup_transfer(spi_xcomm, spi, t, &settings);
+		if (status < 0)
+			break;
+
+		is_last = list_is_last(&t->transfer_list, &msg->transfers);
+		cs_change = t->cs_change;
+
+		if (cs_change ^ is_last)
+			settings |= BIT(5);
+		else
+			settings &= ~BIT(5);
+
+		if (t->rx_buf) {
+			spi_xcomm->settings = settings;
+			status = spi_xcomm_sync_config(spi_xcomm, t->len);
+			if (status < 0)
+				break;
+		} else if (settings != spi_xcomm->settings || is_first) {
+			spi_xcomm->settings = settings;
+			status = spi_xcomm_sync_config(spi_xcomm, 0);
+			if (status < 0)
+				break;
+		}
+
+		if (t->len) {
+			status = spi_xcomm_txrx_bufs(spi_xcomm, spi, t);
+
+			if (status < 0)
+				break;
+
+			if (status > 0)
+				msg->actual_length += status;
+		}
+		status = 0;
+
+		spi_transfer_delay_exec(t);
+
+		is_first = false;
+	}
+
+	if (status != 0 || !cs_change)
+		spi_xcomm_chipselect(spi_xcomm, spi, false);
+
+	msg->status = status;
+	spi_finalize_current_message(master);
+
+	return status;
+}
+
+static int spi_xcomm_probe(struct i2c_client *i2c)
+{
+	struct spi_xcomm *spi_xcomm;
+	struct spi_master *master;
+	int ret;
+
+	master = spi_alloc_master(&i2c->dev, sizeof(*spi_xcomm));
+	if (!master)
+		return -ENOMEM;
+
+	spi_xcomm = spi_master_get_devdata(master);
+	spi_xcomm->i2c = i2c;
+
+	master->num_chipselect = 16;
+	master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_3WIRE;
+	master->bits_per_word_mask = SPI_BPW_MASK(8);
+	master->flags = SPI_MASTER_HALF_DUPLEX;
+	master->transfer_one_message = spi_xcomm_transfer_one;
+	master->dev.of_node = i2c->dev.of_node;
+	i2c_set_clientdata(i2c, master);
+
+	ret = devm_spi_register_master(&i2c->dev, master);
+	if (ret < 0)
+		spi_master_put(master);
+
+	return ret;
+}
+
+static const struct i2c_device_id spi_xcomm_ids[] = {
+	{ "spi-xcomm" },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, spi_xcomm_ids);
+
+static struct i2c_driver spi_xcomm_driver = {
+	.driver = {
+		.name	= "spi-xcomm",
+	},
+	.id_table	= spi_xcomm_ids,
+	.probe_new	= spi_xcomm_probe,
+};
+module_i2c_driver(spi_xcomm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices AD-FMCOMMS1-EBZ board I2C-SPI bridge driver");