Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 491 insertions, 0 deletions

diff --git a/drivers/staging/greybus/arche-apb-ctrl.c b/drivers/staging/greybus/arche-apb-ctrl.c
new file mode 100644
index 000000000..45afa208d
--- /dev/null
+++ b/drivers/staging/greybus/arche-apb-ctrl.c
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Arche Platform driver to control APB.
+ *
+ * Copyright 2014-2015 Google Inc.
+ * Copyright 2014-2015 Linaro Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spinlock.h>
+#include "arche_platform.h"
+
+static void apb_bootret_deassert(struct device *dev);
+
+struct arche_apb_ctrl_drvdata {
+	/* Control GPIO signals to and from AP <=> AP Bridges */
+	struct gpio_desc *resetn;
+	struct gpio_desc *boot_ret;
+	struct gpio_desc *pwroff;
+	struct gpio_desc *wake_in;
+	struct gpio_desc *wake_out;
+	struct gpio_desc *pwrdn;
+
+	enum arche_platform_state state;
+	bool init_disabled;
+
+	struct regulator *vcore;
+	struct regulator *vio;
+
+	struct gpio_desc *clk_en;
+	struct clk *clk;
+
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pin_default;
+
+	/* V2: SPI Bus control  */
+	struct gpio_desc *spi_en;
+	bool spi_en_polarity_high;
+};
+
+/*
+ * Note that these low level api's are active high
+ */
+static inline void deassert_reset(struct gpio_desc *gpio)
+{
+	gpiod_set_raw_value(gpio, 1);
+}
+
+static inline void assert_reset(struct gpio_desc *gpio)
+{
+	gpiod_set_raw_value(gpio, 0);
+}
+
+/*
+ * Note: Please do not modify the below sequence, as it is as per the spec
+ */
+static int coldboot_seq(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev);
+	int ret;
+
+	if (apb->init_disabled ||
+	    apb->state == ARCHE_PLATFORM_STATE_ACTIVE)
+		return 0;
+
+	/* Hold APB in reset state */
+	assert_reset(apb->resetn);
+
+	if (apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en)
+		devm_gpiod_put(dev, apb->spi_en);
+
+	/* Enable power to APB */
+	if (!IS_ERR(apb->vcore)) {
+		ret = regulator_enable(apb->vcore);
+		if (ret) {
+			dev_err(dev, "failed to enable core regulator\n");
+			return ret;
+		}
+	}
+
+	if (!IS_ERR(apb->vio)) {
+		ret = regulator_enable(apb->vio);
+		if (ret) {
+			dev_err(dev, "failed to enable IO regulator\n");
+			return ret;
+		}
+	}
+
+	apb_bootret_deassert(dev);
+
+	/* On DB3 clock was not mandatory */
+	if (apb->clk_en)
+		gpiod_set_value(apb->clk_en, 1);
+
+	usleep_range(100, 200);
+
+	/* deassert reset to APB : Active-low signal */
+	deassert_reset(apb->resetn);
+
+	apb->state = ARCHE_PLATFORM_STATE_ACTIVE;
+
+	return 0;
+}
+
+static int fw_flashing_seq(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev);
+	int ret;
+
+	if (apb->init_disabled ||
+	    apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING)
+		return 0;
+
+	ret = regulator_enable(apb->vcore);
+	if (ret) {
+		dev_err(dev, "failed to enable core regulator\n");
+		return ret;
+	}
+
+	ret = regulator_enable(apb->vio);
+	if (ret) {
+		dev_err(dev, "failed to enable IO regulator\n");
+		return ret;
+	}
+
+	if (apb->spi_en) {
+		unsigned long flags;
+
+		if (apb->spi_en_polarity_high)
+			flags = GPIOD_OUT_HIGH;
+		else
+			flags = GPIOD_OUT_LOW;
+
+		apb->spi_en = devm_gpiod_get(dev, "spi-en", flags);
+		if (IS_ERR(apb->spi_en)) {
+			ret = PTR_ERR(apb->spi_en);
+			dev_err(dev, "Failed requesting SPI bus en GPIO: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	/* for flashing device should be in reset state */
+	assert_reset(apb->resetn);
+	apb->state = ARCHE_PLATFORM_STATE_FW_FLASHING;
+
+	return 0;
+}
+
+static int standby_boot_seq(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev);
+
+	if (apb->init_disabled)
+		return 0;
+
+	/*
+	 * Even if it is in OFF state,
+	 * then we do not want to change the state
+	 */
+	if (apb->state == ARCHE_PLATFORM_STATE_STANDBY ||
+	    apb->state == ARCHE_PLATFORM_STATE_OFF)
+		return 0;
+
+	if (apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en)
+		devm_gpiod_put(dev, apb->spi_en);
+
+	/*
+	 * As per WDM spec, do nothing
+	 *
+	 * Pasted from WDM spec,
+	 *  - A falling edge on POWEROFF_L is detected (a)
+	 *  - WDM enters standby mode, but no output signals are changed
+	 */
+
+	/* TODO: POWEROFF_L is input to WDM module  */
+	apb->state = ARCHE_PLATFORM_STATE_STANDBY;
+	return 0;
+}
+
+static void poweroff_seq(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev);
+
+	if (apb->init_disabled || apb->state == ARCHE_PLATFORM_STATE_OFF)
+		return;
+
+	if (apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING && apb->spi_en)
+		devm_gpiod_put(dev, apb->spi_en);
+
+	/* disable the clock */
+	if (apb->clk_en)
+		gpiod_set_value(apb->clk_en, 0);
+
+	if (!IS_ERR(apb->vcore) && regulator_is_enabled(apb->vcore) > 0)
+		regulator_disable(apb->vcore);
+
+	if (!IS_ERR(apb->vio) && regulator_is_enabled(apb->vio) > 0)
+		regulator_disable(apb->vio);
+
+	/* As part of exit, put APB back in reset state */
+	assert_reset(apb->resetn);
+	apb->state = ARCHE_PLATFORM_STATE_OFF;
+
+	/* TODO: May have to send an event to SVC about this exit */
+}
+
+static void apb_bootret_deassert(struct device *dev)
+{
+	struct arche_apb_ctrl_drvdata *apb = dev_get_drvdata(dev);
+
+	gpiod_set_value(apb->boot_ret, 0);
+}
+
+int apb_ctrl_coldboot(struct device *dev)
+{
+	return coldboot_seq(to_platform_device(dev));
+}
+
+int apb_ctrl_fw_flashing(struct device *dev)
+{
+	return fw_flashing_seq(to_platform_device(dev));
+}
+
+int apb_ctrl_standby_boot(struct device *dev)
+{
+	return standby_boot_seq(to_platform_device(dev));
+}
+
+void apb_ctrl_poweroff(struct device *dev)
+{
+	poweroff_seq(to_platform_device(dev));
+}
+
+static ssize_t state_store(struct device *dev,
+			   struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev);
+	int ret = 0;
+	bool is_disabled;
+
+	if (sysfs_streq(buf, "off")) {
+		if (apb->state == ARCHE_PLATFORM_STATE_OFF)
+			return count;
+
+		poweroff_seq(pdev);
+	} else if (sysfs_streq(buf, "active")) {
+		if (apb->state == ARCHE_PLATFORM_STATE_ACTIVE)
+			return count;
+
+		poweroff_seq(pdev);
+		is_disabled = apb->init_disabled;
+		apb->init_disabled = false;
+		ret = coldboot_seq(pdev);
+		if (ret)
+			apb->init_disabled = is_disabled;
+	} else if (sysfs_streq(buf, "standby")) {
+		if (apb->state == ARCHE_PLATFORM_STATE_STANDBY)
+			return count;
+
+		ret = standby_boot_seq(pdev);
+	} else if (sysfs_streq(buf, "fw_flashing")) {
+		if (apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING)
+			return count;
+
+		/*
+		 * First we want to make sure we power off everything
+		 * and then enter FW flashing state
+		 */
+		poweroff_seq(pdev);
+		ret = fw_flashing_seq(pdev);
+	} else {
+		dev_err(dev, "unknown state\n");
+		ret = -EINVAL;
+	}
+
+	return ret ? ret : count;
+}
+
+static ssize_t state_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct arche_apb_ctrl_drvdata *apb = dev_get_drvdata(dev);
+
+	switch (apb->state) {
+	case ARCHE_PLATFORM_STATE_OFF:
+		return sprintf(buf, "off%s\n",
+				apb->init_disabled ? ",disabled" : "");
+	case ARCHE_PLATFORM_STATE_ACTIVE:
+		return sprintf(buf, "active\n");
+	case ARCHE_PLATFORM_STATE_STANDBY:
+		return sprintf(buf, "standby\n");
+	case ARCHE_PLATFORM_STATE_FW_FLASHING:
+		return sprintf(buf, "fw_flashing\n");
+	default:
+		return sprintf(buf, "unknown state\n");
+	}
+}
+
+static DEVICE_ATTR_RW(state);
+
+static int apb_ctrl_get_devtree_data(struct platform_device *pdev,
+				     struct arche_apb_ctrl_drvdata *apb)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	apb->resetn = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(apb->resetn)) {
+		ret = PTR_ERR(apb->resetn);
+		dev_err(dev, "Failed requesting reset GPIO: %d\n", ret);
+		return ret;
+	}
+
+	apb->boot_ret = devm_gpiod_get(dev, "boot-ret", GPIOD_OUT_LOW);
+	if (IS_ERR(apb->boot_ret)) {
+		ret = PTR_ERR(apb->boot_ret);
+		dev_err(dev, "Failed requesting bootret GPIO: %d\n", ret);
+		return ret;
+	}
+
+	/* It's not mandatory to support power management interface */
+	apb->pwroff = devm_gpiod_get_optional(dev, "pwr-off", GPIOD_IN);
+	if (IS_ERR(apb->pwroff)) {
+		ret = PTR_ERR(apb->pwroff);
+		dev_err(dev, "Failed requesting pwroff_n GPIO: %d\n", ret);
+		return ret;
+	}
+
+	/* Do not make clock mandatory as of now (for DB3) */
+	apb->clk_en = devm_gpiod_get_optional(dev, "clock-en", GPIOD_OUT_LOW);
+	if (IS_ERR(apb->clk_en)) {
+		ret = PTR_ERR(apb->clk_en);
+		dev_err(dev, "Failed requesting APB clock en GPIO: %d\n", ret);
+		return ret;
+	}
+
+	apb->pwrdn = devm_gpiod_get(dev, "pwr-down", GPIOD_OUT_LOW);
+	if (IS_ERR(apb->pwrdn)) {
+		ret = PTR_ERR(apb->pwrdn);
+		dev_warn(dev, "Failed requesting power down GPIO: %d\n", ret);
+		return ret;
+	}
+
+	/* Regulators are optional, as we may have fixed supply coming in */
+	apb->vcore = devm_regulator_get(dev, "vcore");
+	if (IS_ERR(apb->vcore))
+		dev_warn(dev, "no core regulator found\n");
+
+	apb->vio = devm_regulator_get(dev, "vio");
+	if (IS_ERR(apb->vio))
+		dev_warn(dev, "no IO regulator found\n");
+
+	apb->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(apb->pinctrl)) {
+		dev_err(&pdev->dev, "could not get pinctrl handle\n");
+		return PTR_ERR(apb->pinctrl);
+	}
+	apb->pin_default = pinctrl_lookup_state(apb->pinctrl, "default");
+	if (IS_ERR(apb->pin_default)) {
+		dev_err(&pdev->dev, "could not get default pin state\n");
+		return PTR_ERR(apb->pin_default);
+	}
+
+	/* Only applicable for platform >= V2 */
+	if (of_property_read_bool(pdev->dev.of_node, "gb,spi-en-active-high"))
+		apb->spi_en_polarity_high = true;
+
+	return 0;
+}
+
+static int arche_apb_ctrl_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct arche_apb_ctrl_drvdata *apb;
+	struct device *dev = &pdev->dev;
+
+	apb = devm_kzalloc(&pdev->dev, sizeof(*apb), GFP_KERNEL);
+	if (!apb)
+		return -ENOMEM;
+
+	ret = apb_ctrl_get_devtree_data(pdev, apb);
+	if (ret) {
+		dev_err(dev, "failed to get apb devicetree data %d\n", ret);
+		return ret;
+	}
+
+	/* Initially set APB to OFF state */
+	apb->state = ARCHE_PLATFORM_STATE_OFF;
+	/* Check whether device needs to be enabled on boot */
+	if (of_property_read_bool(pdev->dev.of_node, "arche,init-disable"))
+		apb->init_disabled = true;
+
+	platform_set_drvdata(pdev, apb);
+
+	/* Create sysfs interface to allow user to change state dynamically */
+	ret = device_create_file(dev, &dev_attr_state);
+	if (ret) {
+		dev_err(dev, "failed to create state file in sysfs\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "Device registered successfully\n");
+	return 0;
+}
+
+static int arche_apb_ctrl_remove(struct platform_device *pdev)
+{
+	device_remove_file(&pdev->dev, &dev_attr_state);
+	poweroff_seq(pdev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static int __maybe_unused arche_apb_ctrl_suspend(struct device *dev)
+{
+	/*
+	 * If timing profile permits, we may shutdown bridge
+	 * completely
+	 *
+	 * TODO: sequence ??
+	 *
+	 * Also, need to make sure we meet precondition for unipro suspend
+	 * Precondition: Definition ???
+	 */
+	return 0;
+}
+
+static int __maybe_unused arche_apb_ctrl_resume(struct device *dev)
+{
+	/*
+	 * At least for ES2 we have to meet the delay requirement between
+	 * unipro switch and AP bridge init, depending on whether bridge is in
+	 * OFF state or standby state.
+	 *
+	 * Based on whether bridge is in standby or OFF state we may have to
+	 * assert multiple signals. Please refer to WDM spec, for more info.
+	 *
+	 */
+	return 0;
+}
+
+static void arche_apb_ctrl_shutdown(struct platform_device *pdev)
+{
+	apb_ctrl_poweroff(&pdev->dev);
+}
+
+static SIMPLE_DEV_PM_OPS(arche_apb_ctrl_pm_ops, arche_apb_ctrl_suspend,
+			 arche_apb_ctrl_resume);
+
+static const struct of_device_id arche_apb_ctrl_of_match[] = {
+	{ .compatible = "usbffff,2", },
+	{ },
+};
+
+static struct platform_driver arche_apb_ctrl_device_driver = {
+	.probe		= arche_apb_ctrl_probe,
+	.remove		= arche_apb_ctrl_remove,
+	.shutdown	= arche_apb_ctrl_shutdown,
+	.driver		= {
+		.name	= "arche-apb-ctrl",
+		.pm	= &arche_apb_ctrl_pm_ops,
+		.of_match_table = arche_apb_ctrl_of_match,
+	}
+};
+
+int __init arche_apb_init(void)
+{
+	return platform_driver_register(&arche_apb_ctrl_device_driver);
+}
+
+void __exit arche_apb_exit(void)
+{
+	platform_driver_unregister(&arche_apb_ctrl_device_driver);
+}