Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 477 insertions, 0 deletions

diff --git a/drivers/staging/vt6656/card.c b/drivers/staging/vt6656/card.c
new file mode 100644
index 000000000..7827e579e
--- /dev/null
+++ b/drivers/staging/vt6656/card.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * Purpose: Provide functions to setup NIC operation mode
+ * Functions:
+ *      vnt_set_rspinf - Set RSPINF
+ *      vnt_update_ifs - Update slotTime,SIFS,DIFS, and EIFS
+ *      vnt_update_top_rates - Update BasicTopRate
+ *      vnt_add_basic_rate - Add to BasicRateSet
+ *      vnt_ofdm_min_rate - Check if any OFDM rate is in BasicRateSet
+ *      vnt_get_tsf_offset - Calculate TSFOffset
+ *      vnt_get_current_tsf - Read Current NIC TSF counter
+ *      vnt_get_next_tbtt - Calculate Next Beacon TSF counter
+ *      vnt_reset_next_tbtt - Set NIC Beacon time
+ *      vnt_update_next_tbtt - Sync. NIC Beacon time
+ *      vnt_radio_power_off - Turn Off NIC Radio Power
+ *      vnt_radio_power_on - Turn On NIC Radio Power
+ *
+ * Revision History:
+ *      06-10-2003 Bryan YC Fan:  Re-write codes to support VT3253 spec.
+ *      08-26-2003 Kyle Hsu:      Modify the definition type of dwIoBase.
+ *      09-01-2003 Bryan YC Fan:  Add vnt_update_ifs().
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include "device.h"
+#include "card.h"
+#include "baseband.h"
+#include "mac.h"
+#include "desc.h"
+#include "rf.h"
+#include "power.h"
+#include "key.h"
+#include "usbpipe.h"
+
+/* const u16 cw_rxbcntsf_off[MAX_RATE] =
+ *   {17, 34, 96, 192, 34, 23, 17, 11, 8, 5, 4, 3};
+ */
+
+static const u16 cw_rxbcntsf_off[MAX_RATE] = {
+	192, 96, 34, 17, 34, 23, 17, 11, 8, 5, 4, 3
+};
+
+int vnt_set_channel(struct vnt_private *priv, u32 connection_channel)
+{
+	int ret;
+
+	if (connection_channel > CB_MAX_CHANNEL || !connection_channel)
+		return -EINVAL;
+
+	/* clear NAV */
+	vnt_mac_reg_bits_on(priv, MAC_REG_MACCR, MACCR_CLRNAV);
+
+	/* Set Channel[7] = 0 to tell H/W channel is changing now. */
+	vnt_mac_reg_bits_off(priv, MAC_REG_CHANNEL,
+			     (BIT(7) | BIT(5) | BIT(4)));
+
+	ret = vnt_control_out(priv, MESSAGE_TYPE_SELECT_CHANNEL,
+			      connection_channel, 0, 0, NULL);
+	if (ret)
+		return ret;
+
+	return vnt_control_out_u8(priv, MESSAGE_REQUEST_MACREG, MAC_REG_CHANNEL,
+				  (u8)(connection_channel | 0x80));
+}
+
+static const u8 vnt_rspinf_b_short_table[] = {
+	0x70, 0x00, 0x00, 0x00, 0x38, 0x00, 0x09, 0x00,
+	0x15, 0x00, 0x0a, 0x00, 0x0b, 0x00, 0x0b, 0x80
+};
+
+static const u8 vnt_rspinf_b_long_table[] = {
+	0x70, 0x00, 0x00, 0x00, 0x38, 0x00, 0x01, 0x00,
+	0x15, 0x00, 0x02, 0x00, 0x0b, 0x00, 0x03, 0x80
+};
+
+static const u8 vnt_rspinf_a_table[] = {
+	0x9b, 0x18, 0x9f, 0x10, 0x9a, 0x0a, 0x9e, 0x08, 0x99,
+	0x08, 0x9d, 0x04, 0x98, 0x04, 0x9c, 0x04, 0x9c, 0x04
+};
+
+static const u8 vnt_rspinf_gb_table[] = {
+	0x8b, 0x1e, 0x8f, 0x16, 0x8a, 0x12, 0x8e, 0x0e, 0x89,
+	0x0e, 0x8d, 0x0a, 0x88, 0x0a, 0x8c, 0x0a, 0x8c, 0x0a
+};
+
+int vnt_set_rspinf(struct vnt_private *priv, u8 bb_type)
+{
+	const u8 *data;
+	u16 len;
+	int ret;
+
+	if (priv->preamble_type) {
+		data = vnt_rspinf_b_short_table;
+		len = ARRAY_SIZE(vnt_rspinf_b_short_table);
+	} else {
+		data = vnt_rspinf_b_long_table;
+		len = ARRAY_SIZE(vnt_rspinf_b_long_table);
+	}
+
+	 /* RSPINF_b_1 to RSPINF_b_11 */
+	ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_RSPINF_B_1,
+			      MESSAGE_REQUEST_MACREG, len, data);
+	if (ret)
+		return ret;
+
+	if (bb_type == BB_TYPE_11A) {
+		data = vnt_rspinf_a_table;
+		len = ARRAY_SIZE(vnt_rspinf_a_table);
+	} else {
+		data = vnt_rspinf_gb_table;
+		len = ARRAY_SIZE(vnt_rspinf_gb_table);
+	}
+
+	/* RSPINF_a_6 to RSPINF_a_72 */
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_RSPINF_A_6,
+			       MESSAGE_REQUEST_MACREG, len, data);
+}
+
+int vnt_update_ifs(struct vnt_private *priv)
+{
+	u8 max_min = 0;
+	u8 data[4];
+	int ret;
+
+	if (priv->packet_type == PK_TYPE_11A) {
+		priv->slot = C_SLOT_SHORT;
+		priv->sifs = C_SIFS_A;
+		priv->difs = C_SIFS_A + 2 * C_SLOT_SHORT;
+		max_min = 4;
+	} else {
+		priv->sifs = C_SIFS_BG;
+
+		if (priv->short_slot_time) {
+			priv->slot = C_SLOT_SHORT;
+			max_min = 4;
+		} else {
+			priv->slot = C_SLOT_LONG;
+			max_min = 5;
+		}
+
+		priv->difs = C_SIFS_BG + 2 * priv->slot;
+	}
+
+	priv->eifs = C_EIFS;
+
+	data[0] = (u8)priv->sifs;
+	data[1] = (u8)priv->difs;
+	data[2] = (u8)priv->eifs;
+	data[3] = (u8)priv->slot;
+
+	ret = vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_SIFS,
+			      MESSAGE_REQUEST_MACREG, 4, &data[0]);
+	if (ret)
+		return ret;
+
+	max_min |= 0xa0;
+
+	return vnt_control_out(priv, MESSAGE_TYPE_WRITE, MAC_REG_CWMAXMIN0,
+			       MESSAGE_REQUEST_MACREG, 1, &max_min);
+}
+
+void vnt_update_top_rates(struct vnt_private *priv)
+{
+	int pos;
+
+	pos = fls(priv->basic_rates & GENMASK(RATE_54M, RATE_6M));
+	priv->top_ofdm_basic_rate = pos ? (pos - 1) : RATE_24M;
+
+	pos = fls(priv->basic_rates & GENMASK(RATE_11M, RATE_1M));
+	priv->top_cck_basic_rate = pos ? (pos - 1) : RATE_1M;
+}
+
+bool vnt_ofdm_min_rate(struct vnt_private *priv)
+{
+	return priv->basic_rates & GENMASK(RATE_54M, RATE_6M) ? true : false;
+}
+
+u8 vnt_get_pkt_type(struct vnt_private *priv)
+{
+	if (priv->bb_type == BB_TYPE_11A || priv->bb_type == BB_TYPE_11B)
+		return (u8)priv->bb_type;
+	else if (vnt_ofdm_min_rate(priv))
+		return PK_TYPE_11GA;
+	return PK_TYPE_11GB;
+}
+
+/*
+ * Description: Calculate TSF offset of two TSF input
+ *              Get TSF Offset from RxBCN's TSF and local TSF
+ *
+ * Parameters:
+ *  In:
+ *      rx_rate	- rx rate.
+ *      tsf1	- Rx BCN's TSF
+ *      tsf2	- Local TSF
+ *  Out:
+ *      none
+ *
+ * Return Value: TSF Offset value
+ *
+ */
+u64 vnt_get_tsf_offset(u8 rx_rate, u64 tsf1, u64 tsf2)
+{
+	return tsf1 - tsf2 - (u64)cw_rxbcntsf_off[rx_rate % MAX_RATE];
+}
+
+int vnt_adjust_tsf(struct vnt_private *priv, u8 rx_rate,
+		   u64 time_stamp, u64 local_tsf)
+{
+	u64 tsf_offset = 0;
+	u8 data[8];
+
+	tsf_offset = vnt_get_tsf_offset(rx_rate, time_stamp, local_tsf);
+
+	data[0] = (u8)tsf_offset;
+	data[1] = (u8)(tsf_offset >> 8);
+	data[2] = (u8)(tsf_offset >> 16);
+	data[3] = (u8)(tsf_offset >> 24);
+	data[4] = (u8)(tsf_offset >> 32);
+	data[5] = (u8)(tsf_offset >> 40);
+	data[6] = (u8)(tsf_offset >> 48);
+	data[7] = (u8)(tsf_offset >> 56);
+
+	return vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
+			       MESSAGE_REQUEST_TSF, 0, 8, data);
+}
+
+/*
+ * Description: Read NIC TSF counter
+ *              Get local TSF counter
+ *
+ * Parameters:
+ *  In:
+ *	priv		- The adapter to be read
+ *  Out:
+ *	current_tsf	- Current TSF counter
+ *
+ * Return Value: true if success; otherwise false
+ *
+ */
+bool vnt_get_current_tsf(struct vnt_private *priv, u64 *current_tsf)
+{
+	*current_tsf = priv->current_tsf;
+
+	return true;
+}
+
+/*
+ * Description: Clear NIC TSF counter
+ *              Clear local TSF counter
+ *
+ * Parameters:
+ *  In:
+ *      priv	- The adapter to be read
+ *
+ * Return Value: true if success; otherwise false
+ *
+ */
+bool vnt_clear_current_tsf(struct vnt_private *priv)
+{
+	vnt_mac_reg_bits_on(priv, MAC_REG_TFTCTL, TFTCTL_TSFCNTRST);
+
+	priv->current_tsf = 0;
+
+	return true;
+}
+
+/*
+ * Description: Read NIC TSF counter
+ *              Get NEXTTBTT from adjusted TSF and Beacon Interval
+ *
+ * Parameters:
+ *  In:
+ *      tsf		- Current TSF counter
+ *      beacon_interval - Beacon Interval
+ *  Out:
+ *      tsf		- Current TSF counter
+ *
+ * Return Value: TSF value of next Beacon
+ *
+ */
+u64 vnt_get_next_tbtt(u64 tsf, u16 beacon_interval)
+{
+	u32 beacon_int;
+
+	beacon_int = beacon_interval * 1024;
+
+	/* Next TBTT =
+	 *	((local_current_TSF / beacon_interval) + 1) * beacon_interval
+	 */
+	if (beacon_int) {
+		do_div(tsf, beacon_int);
+		tsf += 1;
+		tsf *= beacon_int;
+	}
+
+	return tsf;
+}
+
+int vnt_reset_next_tbtt(struct vnt_private *priv, u16 beacon_interval)
+{
+	u64 next_tbtt = 0;
+	u8 data[8];
+
+	vnt_clear_current_tsf(priv);
+
+	next_tbtt = vnt_get_next_tbtt(next_tbtt, beacon_interval);
+
+	data[0] = (u8)next_tbtt;
+	data[1] = (u8)(next_tbtt >> 8);
+	data[2] = (u8)(next_tbtt >> 16);
+	data[3] = (u8)(next_tbtt >> 24);
+	data[4] = (u8)(next_tbtt >> 32);
+	data[5] = (u8)(next_tbtt >> 40);
+	data[6] = (u8)(next_tbtt >> 48);
+	data[7] = (u8)(next_tbtt >> 56);
+
+	return vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
+			       MESSAGE_REQUEST_TBTT, 0, 8, data);
+}
+
+int vnt_update_next_tbtt(struct vnt_private *priv, u64 tsf,
+			 u16 beacon_interval)
+{
+	u8 data[8];
+	int ret;
+
+	tsf = vnt_get_next_tbtt(tsf, beacon_interval);
+
+	data[0] = (u8)tsf;
+	data[1] = (u8)(tsf >> 8);
+	data[2] = (u8)(tsf >> 16);
+	data[3] = (u8)(tsf >> 24);
+	data[4] = (u8)(tsf >> 32);
+	data[5] = (u8)(tsf >> 40);
+	data[6] = (u8)(tsf >> 48);
+	data[7] = (u8)(tsf >> 56);
+
+	ret = vnt_control_out(priv, MESSAGE_TYPE_SET_TSFTBTT,
+			      MESSAGE_REQUEST_TBTT, 0, 8, data);
+	if (ret)
+		return ret;
+
+	dev_dbg(&priv->usb->dev, "%s TBTT: %8llx\n", __func__, tsf);
+	return 0;
+}
+
+/*
+ * Description: Turn off Radio power
+ *
+ * Parameters:
+ *  In:
+ *      priv         - The adapter to be turned off
+ *  Out:
+ *      none
+ *
+ * Return Value: true if success; otherwise false
+ *
+ */
+int vnt_radio_power_off(struct vnt_private *priv)
+{
+	int ret = 0;
+
+	switch (priv->rf_type) {
+	case RF_AL2230:
+	case RF_AL2230S:
+	case RF_VT3226:
+	case RF_VT3226D0:
+		ret = vnt_mac_reg_bits_off(priv, MAC_REG_SOFTPWRCTL,
+					   (SOFTPWRCTL_SWPE2 |
+					    SOFTPWRCTL_SWPE3));
+		break;
+	}
+
+	if (ret)
+		goto end;
+
+	ret = vnt_mac_reg_bits_off(priv, MAC_REG_HOSTCR, HOSTCR_RXON);
+	if (ret)
+		goto end;
+
+	ret = vnt_set_deep_sleep(priv);
+	if (ret)
+		goto end;
+
+	ret = vnt_mac_reg_bits_on(priv, MAC_REG_GPIOCTL1, GPIO3_INTMD);
+
+end:
+	return ret;
+}
+
+/*
+ * Description: Turn on Radio power
+ *
+ * Parameters:
+ *  In:
+ *      priv         - The adapter to be turned on
+ *  Out:
+ *      none
+ *
+ * Return Value: true if success; otherwise false
+ *
+ */
+int vnt_radio_power_on(struct vnt_private *priv)
+{
+	int ret = 0;
+
+	ret = vnt_exit_deep_sleep(priv);
+	if (ret)
+		return ret;
+
+	ret = vnt_mac_reg_bits_on(priv, MAC_REG_HOSTCR, HOSTCR_RXON);
+	if (ret)
+		return ret;
+
+	switch (priv->rf_type) {
+	case RF_AL2230:
+	case RF_AL2230S:
+	case RF_VT3226:
+	case RF_VT3226D0:
+		ret = vnt_mac_reg_bits_on(priv, MAC_REG_SOFTPWRCTL,
+					  (SOFTPWRCTL_SWPE2 |
+					   SOFTPWRCTL_SWPE3));
+		if (ret)
+			return ret;
+	}
+
+	return vnt_mac_reg_bits_off(priv, MAC_REG_GPIOCTL1, GPIO3_INTMD);
+}
+
+int vnt_set_bss_mode(struct vnt_private *priv)
+{
+	int ret;
+	unsigned char type = priv->bb_type;
+	unsigned char data = 0;
+	unsigned char bb_vga_2_3 = 0x00;
+
+	ret = vnt_mac_set_bb_type(priv, type);
+	if (ret)
+		return ret;
+
+	priv->packet_type = vnt_get_pkt_type(priv);
+
+	if (priv->bb_type == BB_TYPE_11A) {
+		data = 0x03;
+		bb_vga_2_3 = 0x10;
+	} else if (priv->bb_type == BB_TYPE_11B) {
+		data = 0x02;
+	} else if (priv->bb_type == BB_TYPE_11G) {
+		data = 0x08;
+	}
+
+	if (data) {
+		ret = vnt_control_out_u8(priv, MESSAGE_REQUEST_BBREG,
+					 0x88, data);
+		if (ret)
+			return ret;
+	}
+
+	ret = vnt_update_ifs(priv);
+	if (ret)
+		return ret;
+
+	ret = vnt_set_rspinf(priv, priv->bb_type);
+	if (ret)
+		return ret;
+
+	priv->bb_vga[2] = bb_vga_2_3;
+	priv->bb_vga[3] = bb_vga_2_3;
+
+	return vnt_set_vga_gain_offset(priv, priv->bb_vga[0]);
+}