Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1356 insertions, 0 deletions

diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c
new file mode 100644
index 000000000..9030a8939
--- /dev/null
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -0,0 +1,1356 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1)
+/*
+ *
+ * Management request handler functions.
+ *
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+ * --------------------------------------------------------------------
+ *
+ * linux-wlan
+ *
+ *   The contents of this file are subject to the Mozilla Public
+ *   License Version 1.1 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.mozilla.org/MPL/
+ *
+ *   Software distributed under the License is distributed on an "AS
+ *   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *   implied. See the License for the specific language governing
+ *   rights and limitations under the License.
+ *
+ *   Alternatively, the contents of this file may be used under the
+ *   terms of the GNU Public License version 2 (the "GPL"), in which
+ *   case the provisions of the GPL are applicable instead of the
+ *   above.  If you wish to allow the use of your version of this file
+ *   only under the terms of the GPL and not to allow others to use
+ *   your version of this file under the MPL, indicate your decision
+ *   by deleting the provisions above and replace them with the notice
+ *   and other provisions required by the GPL.  If you do not delete
+ *   the provisions above, a recipient may use your version of this
+ *   file under either the MPL or the GPL.
+ *
+ * --------------------------------------------------------------------
+ *
+ * Inquiries regarding the linux-wlan Open Source project can be
+ * made directly to:
+ *
+ * AbsoluteValue Systems Inc.
+ * info@linux-wlan.com
+ * http://www.linux-wlan.com
+ *
+ * --------------------------------------------------------------------
+ *
+ * Portions of the development of this software were funded by
+ * Intersil Corporation as part of PRISM(R) chipset product development.
+ *
+ * --------------------------------------------------------------------
+ *
+ * The functions in this file handle management requests sent from
+ * user mode.
+ *
+ * Most of these functions have two separate blocks of code that are
+ * conditional on whether this is a station or an AP.  This is used
+ * to separate out the STA and AP responses to these management primitives.
+ * It's a choice (good, bad, indifferent?) to have the code in the same
+ * place so it's clear that the same primitive is implemented in both
+ * cases but has different behavior.
+ *
+ * --------------------------------------------------------------------
+ */
+
+#include <linux/if_arp.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/byteorder.h>
+#include <linux/random.h>
+#include <linux/usb.h>
+#include <linux/bitops.h>
+
+#include "p80211types.h"
+#include "p80211hdr.h"
+#include "p80211mgmt.h"
+#include "p80211conv.h"
+#include "p80211msg.h"
+#include "p80211netdev.h"
+#include "p80211metadef.h"
+#include "p80211metastruct.h"
+#include "hfa384x.h"
+#include "prism2mgmt.h"
+
+/* Converts 802.11 format rate specifications to prism2 */
+static inline u16 p80211rate_to_p2bit(u32 rate)
+{
+	switch (rate & ~BIT(7)) {
+	case 2:
+		return BIT(0);
+	case 4:
+		return BIT(1);
+	case 11:
+		return BIT(2);
+	case 22:
+		return BIT(3);
+	default:
+		return 0;
+	}
+}
+
+/*----------------------------------------------------------------
+ * prism2mgmt_scan
+ *
+ * Initiate a scan for BSSs.
+ *
+ * This function corresponds to MLME-scan.request and part of
+ * MLME-scan.confirm.  As far as I can tell in the standard, there
+ * are no restrictions on when a scan.request may be issued.  We have
+ * to handle in whatever state the driver/MAC happen to be.
+ *
+ * Arguments:
+ *	wlandev		wlan device structure
+ *	msgp		ptr to msg buffer
+ *
+ * Returns:
+ *	0	success and done
+ *	<0	success, but we're waiting for something to finish.
+ *	>0	an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ *	process thread  (usually)
+ *	interrupt
+ *----------------------------------------------------------------
+ */
+int prism2mgmt_scan(struct wlandevice *wlandev, void *msgp)
+{
+	int result = 0;
+	struct hfa384x *hw = wlandev->priv;
+	struct p80211msg_dot11req_scan *msg = msgp;
+	u16 roamingmode, word;
+	int i, timeout;
+	int istmpenable = 0;
+
+	struct hfa384x_host_scan_request_data scanreq;
+
+	/* gatekeeper check */
+	if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+				     hw->ident_sta_fw.minor,
+				     hw->ident_sta_fw.variant) <
+	    HFA384x_FIRMWARE_VERSION(1, 3, 2)) {
+		netdev_err(wlandev->netdev,
+			   "HostScan not supported with current firmware (<1.3.2).\n");
+		result = 1;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		goto exit;
+	}
+
+	memset(&scanreq, 0, sizeof(scanreq));
+
+	/* save current roaming mode */
+	result = hfa384x_drvr_getconfig16(hw,
+					  HFA384x_RID_CNFROAMINGMODE,
+					  &roamingmode);
+	if (result) {
+		netdev_err(wlandev->netdev,
+			   "getconfig(ROAMMODE) failed. result=%d\n", result);
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		goto exit;
+	}
+
+	/* drop into mode 3 for the scan */
+	result = hfa384x_drvr_setconfig16(hw,
+					  HFA384x_RID_CNFROAMINGMODE,
+					  HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
+	if (result) {
+		netdev_err(wlandev->netdev,
+			   "setconfig(ROAMINGMODE) failed. result=%d\n",
+			   result);
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		goto exit;
+	}
+
+	/* active or passive? */
+	if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+				     hw->ident_sta_fw.minor,
+				     hw->ident_sta_fw.variant) >
+	    HFA384x_FIRMWARE_VERSION(1, 5, 0)) {
+		if (msg->scantype.data != P80211ENUM_scantype_active)
+			word = msg->maxchanneltime.data;
+		else
+			word = 0;
+
+		result =
+		    hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL,
+					     word);
+		if (result) {
+			netdev_warn(wlandev->netdev,
+				    "Passive scan not supported with current firmware.  (<1.5.1)\n");
+		}
+	}
+
+	/* set up the txrate to be 2MBPS. Should be fastest basicrate... */
+	word = HFA384x_RATEBIT_2;
+	scanreq.tx_rate = cpu_to_le16(word);
+
+	/* set up the channel list */
+	word = 0;
+	for (i = 0; i < msg->channellist.data.len; i++) {
+		u8 channel = msg->channellist.data.data[i];
+
+		if (channel > 14)
+			continue;
+		/* channel 1 is BIT 0 ... channel 14 is BIT 13 */
+		word |= (1 << (channel - 1));
+	}
+	scanreq.channel_list = cpu_to_le16(word);
+
+	/* set up the ssid, if present. */
+	scanreq.ssid.len = cpu_to_le16(msg->ssid.data.len);
+	memcpy(scanreq.ssid.data, msg->ssid.data.data, msg->ssid.data.len);
+
+	/* Enable the MAC port if it's not already enabled  */
+	result = hfa384x_drvr_getconfig16(hw, HFA384x_RID_PORTSTATUS, &word);
+	if (result) {
+		netdev_err(wlandev->netdev,
+			   "getconfig(PORTSTATUS) failed. result=%d\n", result);
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		goto exit;
+	}
+	if (word == HFA384x_PORTSTATUS_DISABLED) {
+		__le16 wordbuf[17];
+
+		result = hfa384x_drvr_setconfig16(hw,
+						  HFA384x_RID_CNFROAMINGMODE,
+						  HFA384x_ROAMMODE_HOSTSCAN_HOSTROAM);
+		if (result) {
+			netdev_err(wlandev->netdev,
+				   "setconfig(ROAMINGMODE) failed. result=%d\n",
+				   result);
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		/* Construct a bogus SSID and assign it to OwnSSID and
+		 * DesiredSSID
+		 */
+		wordbuf[0] = cpu_to_le16(WLAN_SSID_MAXLEN);
+		get_random_bytes(&wordbuf[1], WLAN_SSID_MAXLEN);
+		result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
+						wordbuf,
+						HFA384x_RID_CNFOWNSSID_LEN);
+		if (result) {
+			netdev_err(wlandev->netdev, "Failed to set OwnSSID.\n");
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
+						wordbuf,
+						HFA384x_RID_CNFDESIREDSSID_LEN);
+		if (result) {
+			netdev_err(wlandev->netdev,
+				   "Failed to set DesiredSSID.\n");
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		/* bsstype */
+		result = hfa384x_drvr_setconfig16(hw,
+						  HFA384x_RID_CNFPORTTYPE,
+						  HFA384x_PORTTYPE_IBSS);
+		if (result) {
+			netdev_err(wlandev->netdev,
+				   "Failed to set CNFPORTTYPE.\n");
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		/* ibss options */
+		result = hfa384x_drvr_setconfig16(hw,
+						  HFA384x_RID_CREATEIBSS,
+						  HFA384x_CREATEIBSS_JOINCREATEIBSS);
+		if (result) {
+			netdev_err(wlandev->netdev,
+				   "Failed to set CREATEIBSS.\n");
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		result = hfa384x_drvr_enable(hw, 0);
+		if (result) {
+			netdev_err(wlandev->netdev,
+				   "drvr_enable(0) failed. result=%d\n",
+				   result);
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+		istmpenable = 1;
+	}
+
+	/* Figure out our timeout first Kus, then HZ */
+	timeout = msg->channellist.data.len * msg->maxchanneltime.data;
+	timeout = (timeout * HZ) / 1000;
+
+	/* Issue the scan request */
+	hw->scanflag = 0;
+
+	result = hfa384x_drvr_setconfig(hw,
+					HFA384x_RID_HOSTSCAN, &scanreq,
+					sizeof(scanreq));
+	if (result) {
+		netdev_err(wlandev->netdev,
+			   "setconfig(SCANREQUEST) failed. result=%d\n",
+			   result);
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		goto exit;
+	}
+
+	/* sleep until info frame arrives */
+	wait_event_interruptible_timeout(hw->cmdq, hw->scanflag, timeout);
+
+	msg->numbss.status = P80211ENUM_msgitem_status_data_ok;
+	if (hw->scanflag == -1)
+		hw->scanflag = 0;
+
+	msg->numbss.data = hw->scanflag;
+
+	hw->scanflag = 0;
+
+	/* Disable port if we temporarily enabled it. */
+	if (istmpenable) {
+		result = hfa384x_drvr_disable(hw, 0);
+		if (result) {
+			netdev_err(wlandev->netdev,
+				   "drvr_disable(0) failed. result=%d\n",
+				   result);
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+			goto exit;
+		}
+	}
+
+	/* restore original roaming mode */
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE,
+					  roamingmode);
+	if (result) {
+		netdev_err(wlandev->netdev,
+			   "setconfig(ROAMMODE) failed. result=%d\n", result);
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		goto exit;
+	}
+
+	result = 0;
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+exit:
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	return result;
+}
+
+/*----------------------------------------------------------------
+ * prism2mgmt_scan_results
+ *
+ * Retrieve the BSS description for one of the BSSs identified in
+ * a scan.
+ *
+ * Arguments:
+ *	wlandev		wlan device structure
+ *	msgp		ptr to msg buffer
+ *
+ * Returns:
+ *	0	success and done
+ *	<0	success, but we're waiting for something to finish.
+ *	>0	an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ *	process thread  (usually)
+ *	interrupt
+ *----------------------------------------------------------------
+ */
+int prism2mgmt_scan_results(struct wlandevice *wlandev, void *msgp)
+{
+	int result = 0;
+	struct p80211msg_dot11req_scan_results *req;
+	struct hfa384x *hw = wlandev->priv;
+	struct hfa384x_hscan_result_sub *item = NULL;
+
+	int count;
+
+	req = msgp;
+
+	req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	if (!hw->scanresults) {
+		netdev_err(wlandev->netdev,
+			   "dot11req_scan_results can only be used after a successful dot11req_scan.\n");
+		result = 2;
+		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+		goto exit;
+	}
+
+	count = (hw->scanresults->framelen - 3) / 32;
+	if (count > HFA384x_SCANRESULT_MAX)
+		count = HFA384x_SCANRESULT_MAX;
+
+	if (req->bssindex.data >= count) {
+		netdev_dbg(wlandev->netdev,
+			   "requested index (%d) out of range (%d)\n",
+			   req->bssindex.data, count);
+		result = 2;
+		req->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+		goto exit;
+	}
+
+	item = &hw->scanresults->info.hscanresult.result[req->bssindex.data];
+	/* signal and noise */
+	req->signal.status = P80211ENUM_msgitem_status_data_ok;
+	req->noise.status = P80211ENUM_msgitem_status_data_ok;
+	req->signal.data = le16_to_cpu(item->sl);
+	req->noise.data = le16_to_cpu(item->anl);
+
+	/* BSSID */
+	req->bssid.status = P80211ENUM_msgitem_status_data_ok;
+	req->bssid.data.len = WLAN_BSSID_LEN;
+	memcpy(req->bssid.data.data, item->bssid, WLAN_BSSID_LEN);
+
+	/* SSID */
+	req->ssid.status = P80211ENUM_msgitem_status_data_ok;
+	req->ssid.data.len = le16_to_cpu(item->ssid.len);
+	req->ssid.data.len = min_t(u16, req->ssid.data.len, WLAN_SSID_MAXLEN);
+	memcpy(req->ssid.data.data, item->ssid.data, req->ssid.data.len);
+
+	/* supported rates */
+	for (count = 0; count < 10; count++)
+		if (item->supprates[count] == 0)
+			break;
+
+#define REQBASICRATE(N) \
+	do { \
+		if ((count >= (N)) && DOT11_RATE5_ISBASIC_GET(	\
+			item->supprates[(N) - 1])) { \
+			req->basicrate ## N .data = item->supprates[(N) - 1]; \
+			req->basicrate ## N .status = \
+				P80211ENUM_msgitem_status_data_ok; \
+		} \
+	} while (0)
+
+	REQBASICRATE(1);
+	REQBASICRATE(2);
+	REQBASICRATE(3);
+	REQBASICRATE(4);
+	REQBASICRATE(5);
+	REQBASICRATE(6);
+	REQBASICRATE(7);
+	REQBASICRATE(8);
+
+#define REQSUPPRATE(N) \
+	do { \
+		if (count >= (N)) {					\
+			req->supprate ## N .data = item->supprates[(N) - 1]; \
+			req->supprate ## N .status = \
+				P80211ENUM_msgitem_status_data_ok; \
+		} \
+	} while (0)
+
+	REQSUPPRATE(1);
+	REQSUPPRATE(2);
+	REQSUPPRATE(3);
+	REQSUPPRATE(4);
+	REQSUPPRATE(5);
+	REQSUPPRATE(6);
+	REQSUPPRATE(7);
+	REQSUPPRATE(8);
+
+	/* beacon period */
+	req->beaconperiod.status = P80211ENUM_msgitem_status_data_ok;
+	req->beaconperiod.data = le16_to_cpu(item->bcnint);
+
+	/* timestamps */
+	req->timestamp.status = P80211ENUM_msgitem_status_data_ok;
+	req->timestamp.data = jiffies;
+	req->localtime.status = P80211ENUM_msgitem_status_data_ok;
+	req->localtime.data = jiffies;
+
+	/* atim window */
+	req->ibssatimwindow.status = P80211ENUM_msgitem_status_data_ok;
+	req->ibssatimwindow.data = le16_to_cpu(item->atim);
+
+	/* Channel */
+	req->dschannel.status = P80211ENUM_msgitem_status_data_ok;
+	req->dschannel.data = le16_to_cpu(item->chid);
+
+	/* capinfo bits */
+	count = le16_to_cpu(item->capinfo);
+	req->capinfo.status = P80211ENUM_msgitem_status_data_ok;
+	req->capinfo.data = count;
+
+	/* privacy flag */
+	req->privacy.status = P80211ENUM_msgitem_status_data_ok;
+	req->privacy.data = WLAN_GET_MGMT_CAP_INFO_PRIVACY(count);
+
+	/* cfpollable */
+	req->cfpollable.status = P80211ENUM_msgitem_status_data_ok;
+	req->cfpollable.data = WLAN_GET_MGMT_CAP_INFO_CFPOLLABLE(count);
+
+	/* cfpollreq */
+	req->cfpollreq.status = P80211ENUM_msgitem_status_data_ok;
+	req->cfpollreq.data = WLAN_GET_MGMT_CAP_INFO_CFPOLLREQ(count);
+
+	/* bsstype */
+	req->bsstype.status = P80211ENUM_msgitem_status_data_ok;
+	req->bsstype.data = (WLAN_GET_MGMT_CAP_INFO_ESS(count)) ?
+	    P80211ENUM_bsstype_infrastructure : P80211ENUM_bsstype_independent;
+
+	result = 0;
+	req->resultcode.data = P80211ENUM_resultcode_success;
+
+exit:
+	return result;
+}
+
+/*----------------------------------------------------------------
+ * prism2mgmt_start
+ *
+ * Start a BSS.  Any station can do this for IBSS, only AP for ESS.
+ *
+ * Arguments:
+ *	wlandev		wlan device structure
+ *	msgp		ptr to msg buffer
+ *
+ * Returns:
+ *	0	success and done
+ *	<0	success, but we're waiting for something to finish.
+ *	>0	an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ *	process thread  (usually)
+ *	interrupt
+ *----------------------------------------------------------------
+ */
+int prism2mgmt_start(struct wlandevice *wlandev, void *msgp)
+{
+	int result = 0;
+	struct hfa384x *hw = wlandev->priv;
+	struct p80211msg_dot11req_start *msg = msgp;
+
+	struct p80211pstrd *pstr;
+	u8 bytebuf[80];
+	struct hfa384x_bytestr *p2bytestr = (struct hfa384x_bytestr *)bytebuf;
+	u16 word;
+
+	wlandev->macmode = WLAN_MACMODE_NONE;
+
+	/* Set the SSID */
+	memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
+
+	/*** ADHOC IBSS ***/
+	/* see if current f/w is less than 8c3 */
+	if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+				     hw->ident_sta_fw.minor,
+				     hw->ident_sta_fw.variant) <
+	    HFA384x_FIRMWARE_VERSION(0, 8, 3)) {
+		/* Ad-Hoc not quite supported on Prism2 */
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+		goto done;
+	}
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+
+	/*** STATION ***/
+	/* Set the REQUIRED config items */
+	/* SSID */
+	pstr = (struct p80211pstrd *)&msg->ssid.data;
+	prism2mgmt_pstr2bytestr(p2bytestr, pstr);
+	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFOWNSSID,
+					bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
+	if (result) {
+		netdev_err(wlandev->netdev, "Failed to set CnfOwnSSID\n");
+		goto failed;
+	}
+	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
+					bytebuf,
+					HFA384x_RID_CNFDESIREDSSID_LEN);
+	if (result) {
+		netdev_err(wlandev->netdev, "Failed to set CnfDesiredSSID\n");
+		goto failed;
+	}
+
+	/* bsstype - we use the default in the ap firmware */
+	/* IBSS port */
+	hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);
+
+	/* beacon period */
+	word = msg->beaconperiod.data;
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNINT, word);
+	if (result) {
+		netdev_err(wlandev->netdev,
+			   "Failed to set beacon period=%d.\n", word);
+		goto failed;
+	}
+
+	/* dschannel */
+	word = msg->dschannel.data;
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
+	if (result) {
+		netdev_err(wlandev->netdev,
+			   "Failed to set channel=%d.\n", word);
+		goto failed;
+	}
+	/* Basic rates */
+	word = p80211rate_to_p2bit(msg->basicrate1.data);
+	if (msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->basicrate2.data);
+
+	if (msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->basicrate3.data);
+
+	if (msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->basicrate4.data);
+
+	if (msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->basicrate5.data);
+
+	if (msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->basicrate6.data);
+
+	if (msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->basicrate7.data);
+
+	if (msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->basicrate8.data);
+
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
+	if (result) {
+		netdev_err(wlandev->netdev,
+			   "Failed to set basicrates=%d.\n", word);
+		goto failed;
+	}
+
+	/* Operational rates (supprates and txratecontrol) */
+	word = p80211rate_to_p2bit(msg->operationalrate1.data);
+	if (msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->operationalrate2.data);
+
+	if (msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->operationalrate3.data);
+
+	if (msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->operationalrate4.data);
+
+	if (msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->operationalrate5.data);
+
+	if (msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->operationalrate6.data);
+
+	if (msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->operationalrate7.data);
+
+	if (msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok)
+		word |= p80211rate_to_p2bit(msg->operationalrate8.data);
+
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
+	if (result) {
+		netdev_err(wlandev->netdev,
+			   "Failed to set supprates=%d.\n", word);
+		goto failed;
+	}
+
+	result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
+	if (result) {
+		netdev_err(wlandev->netdev, "Failed to set txrates=%d.\n",
+			   word);
+		goto failed;
+	}
+
+	/* Set the macmode so the frame setup code knows what to do */
+	if (msg->bsstype.data == P80211ENUM_bsstype_independent) {
+		wlandev->macmode = WLAN_MACMODE_IBSS_STA;
+		/* lets extend the data length a bit */
+		hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
+	}
+
+	/* Enable the Port */
+	result = hfa384x_drvr_enable(hw, 0);
+	if (result) {
+		netdev_err(wlandev->netdev,
+			   "Enable macport failed, result=%d.\n", result);
+		goto failed;
+	}
+
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	goto done;
+failed:
+	netdev_dbg(wlandev->netdev,
+		   "Failed to set a config option, result=%d\n", result);
+	msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+
+done:
+	return 0;
+}
+
+/*----------------------------------------------------------------
+ * prism2mgmt_readpda
+ *
+ * Collect the PDA data and put it in the message.
+ *
+ * Arguments:
+ *	wlandev		wlan device structure
+ *	msgp		ptr to msg buffer
+ *
+ * Returns:
+ *	0	success and done
+ *	<0	success, but we're waiting for something to finish.
+ *	>0	an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ *	process thread  (usually)
+ *----------------------------------------------------------------
+ */
+int prism2mgmt_readpda(struct wlandevice *wlandev, void *msgp)
+{
+	struct hfa384x *hw = wlandev->priv;
+	struct p80211msg_p2req_readpda *msg = msgp;
+	int result;
+
+	/* We only support collecting the PDA when in the FWLOAD
+	 * state.
+	 */
+	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+		netdev_err(wlandev->netdev,
+			   "PDA may only be read in the fwload state.\n");
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	} else {
+		/*  Call drvr_readpda(), it handles the auxport enable
+		 *  and validating the returned PDA.
+		 */
+		result = hfa384x_drvr_readpda(hw,
+					      msg->pda.data,
+					      HFA384x_PDA_LEN_MAX);
+		if (result) {
+			netdev_err(wlandev->netdev,
+				   "hfa384x_drvr_readpda() failed, result=%d\n",
+				   result);
+
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+			msg->resultcode.status =
+			    P80211ENUM_msgitem_status_data_ok;
+			return 0;
+		}
+		msg->pda.status = P80211ENUM_msgitem_status_data_ok;
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	}
+
+	return 0;
+}
+
+/*----------------------------------------------------------------
+ * prism2mgmt_ramdl_state
+ *
+ * Establishes the beginning/end of a card RAM download session.
+ *
+ * It is expected that the ramdl_write() function will be called
+ * one or more times between the 'enable' and 'disable' calls to
+ * this function.
+ *
+ * Note: This function should not be called when a mac comm port
+ *       is active.
+ *
+ * Arguments:
+ *	wlandev		wlan device structure
+ *	msgp		ptr to msg buffer
+ *
+ * Returns:
+ *	0	success and done
+ *	<0	success, but we're waiting for something to finish.
+ *	>0	an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ *	process thread  (usually)
+ *----------------------------------------------------------------
+ */
+int prism2mgmt_ramdl_state(struct wlandevice *wlandev, void *msgp)
+{
+	struct hfa384x *hw = wlandev->priv;
+	struct p80211msg_p2req_ramdl_state *msg = msgp;
+
+	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+		netdev_err(wlandev->netdev,
+			   "ramdl_state(): may only be called in the fwload state.\n");
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		return 0;
+	}
+
+	/*
+	 ** Note: Interrupts are locked out if this is an AP and are NOT
+	 ** locked out if this is a station.
+	 */
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	if (msg->enable.data == P80211ENUM_truth_true) {
+		if (hfa384x_drvr_ramdl_enable(hw, msg->exeaddr.data)) {
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+		} else {
+			msg->resultcode.data = P80211ENUM_resultcode_success;
+		}
+	} else {
+		hfa384x_drvr_ramdl_disable(hw);
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+	}
+
+	return 0;
+}
+
+/*----------------------------------------------------------------
+ * prism2mgmt_ramdl_write
+ *
+ * Writes a buffer to the card RAM using the download state.  This
+ * is for writing code to card RAM.  To just read or write raw data
+ * use the aux functions.
+ *
+ * Arguments:
+ *	wlandev		wlan device structure
+ *	msgp		ptr to msg buffer
+ *
+ * Returns:
+ *	0	success and done
+ *	<0	success, but we're waiting for something to finish.
+ *	>0	an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ *	process thread  (usually)
+ *----------------------------------------------------------------
+ */
+int prism2mgmt_ramdl_write(struct wlandevice *wlandev, void *msgp)
+{
+	struct hfa384x *hw = wlandev->priv;
+	struct p80211msg_p2req_ramdl_write *msg = msgp;
+	u32 addr;
+	u32 len;
+	u8 *buf;
+
+	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+		netdev_err(wlandev->netdev,
+			   "ramdl_write(): may only be called in the fwload state.\n");
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		return 0;
+	}
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	/* first validate the length */
+	if (msg->len.data > sizeof(msg->data.data)) {
+		msg->resultcode.status =
+		    P80211ENUM_resultcode_invalid_parameters;
+		return 0;
+	}
+	/* call the hfa384x function to do the write */
+	addr = msg->addr.data;
+	len = msg->len.data;
+	buf = msg->data.data;
+	if (hfa384x_drvr_ramdl_write(hw, addr, buf, len))
+		msg->resultcode.data = P80211ENUM_resultcode_refused;
+
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	return 0;
+}
+
+/*----------------------------------------------------------------
+ * prism2mgmt_flashdl_state
+ *
+ * Establishes the beginning/end of a card Flash download session.
+ *
+ * It is expected that the flashdl_write() function will be called
+ * one or more times between the 'enable' and 'disable' calls to
+ * this function.
+ *
+ * Note: This function should not be called when a mac comm port
+ *       is active.
+ *
+ * Arguments:
+ *	wlandev		wlan device structure
+ *	msgp		ptr to msg buffer
+ *
+ * Returns:
+ *	0	success and done
+ *	<0	success, but we're waiting for something to finish.
+ *	>0	an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ *	process thread  (usually)
+ *----------------------------------------------------------------
+ */
+int prism2mgmt_flashdl_state(struct wlandevice *wlandev, void *msgp)
+{
+	int result = 0;
+	struct hfa384x *hw = wlandev->priv;
+	struct p80211msg_p2req_flashdl_state *msg = msgp;
+
+	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+		netdev_err(wlandev->netdev,
+			   "flashdl_state(): may only be called in the fwload state.\n");
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		return 0;
+	}
+
+	/*
+	 ** Note: Interrupts are locked out if this is an AP and are NOT
+	 ** locked out if this is a station.
+	 */
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	if (msg->enable.data == P80211ENUM_truth_true) {
+		if (hfa384x_drvr_flashdl_enable(hw)) {
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+		} else {
+			msg->resultcode.data = P80211ENUM_resultcode_success;
+		}
+	} else {
+		hfa384x_drvr_flashdl_disable(hw);
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		/* NOTE: At this point, the MAC is in the post-reset
+		 * state and the driver is in the fwload state.
+		 * We need to get the MAC back into the fwload
+		 * state.  To do this, we set the nsdstate to HWPRESENT
+		 * and then call the ifstate function to redo everything
+		 * that got us into the fwload state.
+		 */
+		wlandev->msdstate = WLAN_MSD_HWPRESENT;
+		result = prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
+		if (result != P80211ENUM_resultcode_success) {
+			netdev_err(wlandev->netdev,
+				   "prism2sta_ifstate(fwload) failed, P80211ENUM_resultcode=%d\n",
+				   result);
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_implementation_failure;
+			result = -1;
+		}
+	}
+
+	return result;
+}
+
+/*----------------------------------------------------------------
+ * prism2mgmt_flashdl_write
+ *
+ *
+ *
+ * Arguments:
+ *	wlandev		wlan device structure
+ *	msgp		ptr to msg buffer
+ *
+ * Returns:
+ *	0	success and done
+ *	<0	success, but we're waiting for something to finish.
+ *	>0	an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ *	process thread  (usually)
+ *----------------------------------------------------------------
+ */
+int prism2mgmt_flashdl_write(struct wlandevice *wlandev, void *msgp)
+{
+	struct hfa384x *hw = wlandev->priv;
+	struct p80211msg_p2req_flashdl_write *msg = msgp;
+	u32 addr;
+	u32 len;
+	u8 *buf;
+
+	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+		netdev_err(wlandev->netdev,
+			   "flashdl_write(): may only be called in the fwload state.\n");
+		msg->resultcode.data =
+		    P80211ENUM_resultcode_implementation_failure;
+		msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+		return 0;
+	}
+
+	/*
+	 ** Note: Interrupts are locked out if this is an AP and are NOT
+	 ** locked out if this is a station.
+	 */
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	/* first validate the length */
+	if (msg->len.data > sizeof(msg->data.data)) {
+		msg->resultcode.status =
+		    P80211ENUM_resultcode_invalid_parameters;
+		return 0;
+	}
+	/* call the hfa384x function to do the write */
+	addr = msg->addr.data;
+	len = msg->len.data;
+	buf = msg->data.data;
+	if (hfa384x_drvr_flashdl_write(hw, addr, buf, len))
+		msg->resultcode.data = P80211ENUM_resultcode_refused;
+
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	return 0;
+}
+
+/*----------------------------------------------------------------
+ * prism2mgmt_autojoin
+ *
+ * Associate with an ESS.
+ *
+ * Arguments:
+ *	wlandev		wlan device structure
+ *	msgp		ptr to msg buffer
+ *
+ * Returns:
+ *	0	success and done
+ *	<0	success, but we're waiting for something to finish.
+ *	>0	an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ *	process thread  (usually)
+ *	interrupt
+ *----------------------------------------------------------------
+ */
+int prism2mgmt_autojoin(struct wlandevice *wlandev, void *msgp)
+{
+	struct hfa384x *hw = wlandev->priv;
+	int result = 0;
+	u16 reg;
+	u16 port_type;
+	struct p80211msg_lnxreq_autojoin *msg = msgp;
+	struct p80211pstrd *pstr;
+	u8 bytebuf[256];
+	struct hfa384x_bytestr *p2bytestr = (struct hfa384x_bytestr *)bytebuf;
+
+	wlandev->macmode = WLAN_MACMODE_NONE;
+
+	/* Set the SSID */
+	memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
+
+	/* Disable the Port */
+	hfa384x_drvr_disable(hw, 0);
+
+	/*** STATION ***/
+	/* Set the TxRates */
+	hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, 0x000f);
+
+	/* Set the auth type */
+	if (msg->authtype.data == P80211ENUM_authalg_sharedkey)
+		reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
+	else
+		reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
+
+	hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
+
+	/* Set the ssid */
+	memset(bytebuf, 0, 256);
+	pstr = (struct p80211pstrd *)&msg->ssid.data;
+	prism2mgmt_pstr2bytestr(p2bytestr, pstr);
+	result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFDESIREDSSID,
+					bytebuf,
+					HFA384x_RID_CNFDESIREDSSID_LEN);
+	port_type = HFA384x_PORTTYPE_BSS;
+	/* Set the PortType */
+	hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, port_type);
+
+	/* Enable the Port */
+	hfa384x_drvr_enable(hw, 0);
+
+	/* Set the resultcode */
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	msg->resultcode.data = P80211ENUM_resultcode_success;
+
+	return result;
+}
+
+/*----------------------------------------------------------------
+ * prism2mgmt_wlansniff
+ *
+ * Start or stop sniffing.
+ *
+ * Arguments:
+ *	wlandev		wlan device structure
+ *	msgp		ptr to msg buffer
+ *
+ * Returns:
+ *	0	success and done
+ *	<0	success, but we're waiting for something to finish.
+ *	>0	an error occurred while handling the message.
+ * Side effects:
+ *
+ * Call context:
+ *	process thread  (usually)
+ *	interrupt
+ *----------------------------------------------------------------
+ */
+int prism2mgmt_wlansniff(struct wlandevice *wlandev, void *msgp)
+{
+	int result = 0;
+	struct p80211msg_lnxreq_wlansniff *msg = msgp;
+
+	struct hfa384x *hw = wlandev->priv;
+	u16 word;
+
+	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+	switch (msg->enable.data) {
+	case P80211ENUM_truth_false:
+		/* Confirm that we're in monitor mode */
+		if (wlandev->netdev->type == ARPHRD_ETHER) {
+			msg->resultcode.data =
+			    P80211ENUM_resultcode_invalid_parameters;
+			return 0;
+		}
+		/* Disable monitor mode */
+		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_DISABLE);
+		if (result) {
+			netdev_dbg(wlandev->netdev,
+				   "failed to disable monitor mode, result=%d\n",
+				   result);
+			goto failed;
+		}
+		/* Disable port 0 */
+		result = hfa384x_drvr_disable(hw, 0);
+		if (result) {
+			netdev_dbg
+			(wlandev->netdev,
+			     "failed to disable port 0 after sniffing, result=%d\n",
+			     result);
+			goto failed;
+		}
+		/* Clear the driver state */
+		wlandev->netdev->type = ARPHRD_ETHER;
+
+		/* Restore the wepflags */
+		result = hfa384x_drvr_setconfig16(hw,
+						  HFA384x_RID_CNFWEPFLAGS,
+						  hw->presniff_wepflags);
+		if (result) {
+			netdev_dbg
+			    (wlandev->netdev,
+			     "failed to restore wepflags=0x%04x, result=%d\n",
+			     hw->presniff_wepflags, result);
+			goto failed;
+		}
+
+		/* Set the port to its prior type and enable (if necessary) */
+		if (hw->presniff_port_type != 0) {
+			word = hw->presniff_port_type;
+			result = hfa384x_drvr_setconfig16(hw,
+							  HFA384x_RID_CNFPORTTYPE,
+							  word);
+			if (result) {
+				netdev_dbg
+				    (wlandev->netdev,
+				     "failed to restore porttype, result=%d\n",
+				     result);
+				goto failed;
+			}
+
+			/* Enable the port */
+			result = hfa384x_drvr_enable(hw, 0);
+			if (result) {
+				netdev_dbg(wlandev->netdev,
+					   "failed to enable port to presniff setting, result=%d\n",
+					   result);
+				goto failed;
+			}
+		} else {
+			result = hfa384x_drvr_disable(hw, 0);
+		}
+
+		netdev_info(wlandev->netdev, "monitor mode disabled\n");
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		return 0;
+	case P80211ENUM_truth_true:
+		/* Disable the port (if enabled), only check Port 0 */
+		if (hw->port_enabled[0]) {
+			if (wlandev->netdev->type == ARPHRD_ETHER) {
+				/* Save macport 0 state */
+				result = hfa384x_drvr_getconfig16(hw,
+								  HFA384x_RID_CNFPORTTYPE,
+								  &hw->presniff_port_type);
+				if (result) {
+					netdev_dbg
+					(wlandev->netdev,
+					     "failed to read porttype, result=%d\n",
+					     result);
+					goto failed;
+				}
+				/* Save the wepflags state */
+				result = hfa384x_drvr_getconfig16(hw,
+								  HFA384x_RID_CNFWEPFLAGS,
+								  &hw->presniff_wepflags);
+				if (result) {
+					netdev_dbg
+					(wlandev->netdev,
+					     "failed to read wepflags, result=%d\n",
+					     result);
+					goto failed;
+				}
+				hfa384x_drvr_stop(hw);
+				result = hfa384x_drvr_start(hw);
+				if (result) {
+					netdev_dbg(wlandev->netdev,
+						   "failed to restart the card for sniffing, result=%d\n",
+						   result);
+					goto failed;
+				}
+			} else {
+				/* Disable the port */
+				result = hfa384x_drvr_disable(hw, 0);
+				if (result) {
+					netdev_dbg(wlandev->netdev,
+						   "failed to enable port for sniffing, result=%d\n",
+						   result);
+					goto failed;
+				}
+			}
+		} else {
+			hw->presniff_port_type = 0;
+		}
+
+		/* Set the channel we wish to sniff  */
+		word = msg->channel.data;
+		result = hfa384x_drvr_setconfig16(hw,
+						  HFA384x_RID_CNFOWNCHANNEL,
+						  word);
+		hw->sniff_channel = word;
+
+		if (result) {
+			netdev_dbg(wlandev->netdev,
+				   "failed to set channel %d, result=%d\n",
+				   word, result);
+			goto failed;
+		}
+
+		/* Now if we're already sniffing, we can skip the rest */
+		if (wlandev->netdev->type != ARPHRD_ETHER) {
+			/* Set the port type to pIbss */
+			word = HFA384x_PORTTYPE_PSUEDOIBSS;
+			result = hfa384x_drvr_setconfig16(hw,
+							  HFA384x_RID_CNFPORTTYPE,
+							  word);
+			if (result) {
+				netdev_dbg
+				    (wlandev->netdev,
+				     "failed to set porttype %d, result=%d\n",
+				     word, result);
+				goto failed;
+			}
+			if ((msg->keepwepflags.status ==
+			     P80211ENUM_msgitem_status_data_ok) &&
+			    (msg->keepwepflags.data != P80211ENUM_truth_true)) {
+				/* Set the wepflags for no decryption */
+				word = HFA384x_WEPFLAGS_DISABLE_TXCRYPT |
+				    HFA384x_WEPFLAGS_DISABLE_RXCRYPT;
+				result =
+				    hfa384x_drvr_setconfig16(hw,
+							     HFA384x_RID_CNFWEPFLAGS,
+							     word);
+			}
+
+			if (result) {
+				netdev_dbg
+				  (wlandev->netdev,
+				   "failed to set wepflags=0x%04x, result=%d\n",
+				   word, result);
+				goto failed;
+			}
+		}
+
+		/* Do we want to strip the FCS in monitor mode? */
+		if ((msg->stripfcs.status ==
+		     P80211ENUM_msgitem_status_data_ok) &&
+		    (msg->stripfcs.data == P80211ENUM_truth_true)) {
+			hw->sniff_fcs = 0;
+		} else {
+			hw->sniff_fcs = 1;
+		}
+
+		/* Do we want to truncate the packets? */
+		if (msg->packet_trunc.status ==
+		    P80211ENUM_msgitem_status_data_ok) {
+			hw->sniff_truncate = msg->packet_trunc.data;
+		} else {
+			hw->sniff_truncate = 0;
+		}
+
+		/* Enable the port */
+		result = hfa384x_drvr_enable(hw, 0);
+		if (result) {
+			netdev_dbg
+			    (wlandev->netdev,
+			     "failed to enable port for sniffing, result=%d\n",
+			     result);
+			goto failed;
+		}
+		/* Enable monitor mode */
+		result = hfa384x_cmd_monitor(hw, HFA384x_MONITOR_ENABLE);
+		if (result) {
+			netdev_dbg(wlandev->netdev,
+				   "failed to enable monitor mode, result=%d\n",
+				   result);
+			goto failed;
+		}
+
+		if (wlandev->netdev->type == ARPHRD_ETHER)
+			netdev_info(wlandev->netdev, "monitor mode enabled\n");
+
+		/* Set the driver state */
+		/* Do we want the prism2 header? */
+		if ((msg->prismheader.status ==
+		     P80211ENUM_msgitem_status_data_ok) &&
+		    (msg->prismheader.data == P80211ENUM_truth_true)) {
+			hw->sniffhdr = 0;
+			wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
+		} else if ((msg->wlanheader.status ==
+			    P80211ENUM_msgitem_status_data_ok) &&
+			   (msg->wlanheader.data == P80211ENUM_truth_true)) {
+			hw->sniffhdr = 1;
+			wlandev->netdev->type = ARPHRD_IEEE80211_PRISM;
+		} else {
+			wlandev->netdev->type = ARPHRD_IEEE80211;
+		}
+
+		msg->resultcode.data = P80211ENUM_resultcode_success;
+		return 0;
+	default:
+		msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+		return 0;
+	}
+
+failed:
+	msg->resultcode.data = P80211ENUM_resultcode_refused;
+	return 0;
+}