Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 339 insertions, 0 deletions

diff --git a/drivers/tee/optee/optee_msg.h b/drivers/tee/optee/optee_msg.h
new file mode 100644
index 000000000..70e9cc2ee
--- /dev/null
+++ b/drivers/tee/optee/optee_msg.h
@@ -0,0 +1,339 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2015-2021, Linaro Limited
+ */
+#ifndef _OPTEE_MSG_H
+#define _OPTEE_MSG_H
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+
+/*
+ * This file defines the OP-TEE message protocol (ABI) used to communicate
+ * with an instance of OP-TEE running in secure world.
+ *
+ * This file is divided into two sections.
+ * 1. Formatting of messages.
+ * 2. Requests from normal world
+ */
+
+/*****************************************************************************
+ * Part 1 - formatting of messages
+ *****************************************************************************/
+
+#define OPTEE_MSG_ATTR_TYPE_NONE		0x0
+#define OPTEE_MSG_ATTR_TYPE_VALUE_INPUT		0x1
+#define OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT	0x2
+#define OPTEE_MSG_ATTR_TYPE_VALUE_INOUT		0x3
+#define OPTEE_MSG_ATTR_TYPE_RMEM_INPUT		0x5
+#define OPTEE_MSG_ATTR_TYPE_RMEM_OUTPUT		0x6
+#define OPTEE_MSG_ATTR_TYPE_RMEM_INOUT		0x7
+#define OPTEE_MSG_ATTR_TYPE_FMEM_INPUT		OPTEE_MSG_ATTR_TYPE_RMEM_INPUT
+#define OPTEE_MSG_ATTR_TYPE_FMEM_OUTPUT		OPTEE_MSG_ATTR_TYPE_RMEM_OUTPUT
+#define OPTEE_MSG_ATTR_TYPE_FMEM_INOUT		OPTEE_MSG_ATTR_TYPE_RMEM_INOUT
+#define OPTEE_MSG_ATTR_TYPE_TMEM_INPUT		0x9
+#define OPTEE_MSG_ATTR_TYPE_TMEM_OUTPUT		0xa
+#define OPTEE_MSG_ATTR_TYPE_TMEM_INOUT		0xb
+
+#define OPTEE_MSG_ATTR_TYPE_MASK		GENMASK(7, 0)
+
+/*
+ * Meta parameter to be absorbed by the Secure OS and not passed
+ * to the Trusted Application.
+ *
+ * Currently only used with OPTEE_MSG_CMD_OPEN_SESSION.
+ */
+#define OPTEE_MSG_ATTR_META			BIT(8)
+
+/*
+ * Pointer to a list of pages used to register user-defined SHM buffer.
+ * Used with OPTEE_MSG_ATTR_TYPE_TMEM_*.
+ * buf_ptr should point to the beginning of the buffer. Buffer will contain
+ * list of page addresses. OP-TEE core can reconstruct contiguous buffer from
+ * that page addresses list. Page addresses are stored as 64 bit values.
+ * Last entry on a page should point to the next page of buffer.
+ * Every entry in buffer should point to a 4k page beginning (12 least
+ * significant bits must be equal to zero).
+ *
+ * 12 least significant bits of optee_msg_param.u.tmem.buf_ptr should hold
+ * page offset of user buffer.
+ *
+ * So, entries should be placed like members of this structure:
+ *
+ * struct page_data {
+ *   uint64_t pages_array[OPTEE_MSG_NONCONTIG_PAGE_SIZE/sizeof(uint64_t) - 1];
+ *   uint64_t next_page_data;
+ * };
+ *
+ * Structure is designed to exactly fit into the page size
+ * OPTEE_MSG_NONCONTIG_PAGE_SIZE which is a standard 4KB page.
+ *
+ * The size of 4KB is chosen because this is the smallest page size for ARM
+ * architectures. If REE uses larger pages, it should divide them to 4KB ones.
+ */
+#define OPTEE_MSG_ATTR_NONCONTIG		BIT(9)
+
+/*
+ * Memory attributes for caching passed with temp memrefs. The actual value
+ * used is defined outside the message protocol with the exception of
+ * OPTEE_MSG_ATTR_CACHE_PREDEFINED which means the attributes already
+ * defined for the memory range should be used. If optee_smc.h is used as
+ * bearer of this protocol OPTEE_SMC_SHM_* is used for values.
+ */
+#define OPTEE_MSG_ATTR_CACHE_SHIFT		16
+#define OPTEE_MSG_ATTR_CACHE_MASK		GENMASK(2, 0)
+#define OPTEE_MSG_ATTR_CACHE_PREDEFINED		0
+
+/*
+ * Same values as TEE_LOGIN_* from TEE Internal API
+ */
+#define OPTEE_MSG_LOGIN_PUBLIC			0x00000000
+#define OPTEE_MSG_LOGIN_USER			0x00000001
+#define OPTEE_MSG_LOGIN_GROUP			0x00000002
+#define OPTEE_MSG_LOGIN_APPLICATION		0x00000004
+#define OPTEE_MSG_LOGIN_APPLICATION_USER	0x00000005
+#define OPTEE_MSG_LOGIN_APPLICATION_GROUP	0x00000006
+
+/*
+ * Page size used in non-contiguous buffer entries
+ */
+#define OPTEE_MSG_NONCONTIG_PAGE_SIZE		4096
+
+#define OPTEE_MSG_FMEM_INVALID_GLOBAL_ID	0xffffffffffffffff
+
+/**
+ * struct optee_msg_param_tmem - temporary memory reference parameter
+ * @buf_ptr:	Address of the buffer
+ * @size:	Size of the buffer
+ * @shm_ref:	Temporary shared memory reference, pointer to a struct tee_shm
+ *
+ * Secure and normal world communicates pointers as physical address
+ * instead of the virtual address. This is because secure and normal world
+ * have completely independent memory mapping. Normal world can even have a
+ * hypervisor which need to translate the guest physical address (AKA IPA
+ * in ARM documentation) to a real physical address before passing the
+ * structure to secure world.
+ */
+struct optee_msg_param_tmem {
+	u64 buf_ptr;
+	u64 size;
+	u64 shm_ref;
+};
+
+/**
+ * struct optee_msg_param_rmem - registered memory reference parameter
+ * @offs:	Offset into shared memory reference
+ * @size:	Size of the buffer
+ * @shm_ref:	Shared memory reference, pointer to a struct tee_shm
+ */
+struct optee_msg_param_rmem {
+	u64 offs;
+	u64 size;
+	u64 shm_ref;
+};
+
+/**
+ * struct optee_msg_param_fmem - ffa memory reference parameter
+ * @offs_lower:	   Lower bits of offset into shared memory reference
+ * @offs_upper:	   Upper bits of offset into shared memory reference
+ * @internal_offs: Internal offset into the first page of shared memory
+ *		   reference
+ * @size:	   Size of the buffer
+ * @global_id:	   Global identifier of Shared memory
+ */
+struct optee_msg_param_fmem {
+	u32 offs_low;
+	u16 offs_high;
+	u16 internal_offs;
+	u64 size;
+	u64 global_id;
+};
+
+/**
+ * struct optee_msg_param_value - opaque value parameter
+ *
+ * Value parameters are passed unchecked between normal and secure world.
+ */
+struct optee_msg_param_value {
+	u64 a;
+	u64 b;
+	u64 c;
+};
+
+/**
+ * struct optee_msg_param - parameter used together with struct optee_msg_arg
+ * @attr:	attributes
+ * @tmem:	parameter by temporary memory reference
+ * @rmem:	parameter by registered memory reference
+ * @fmem:	parameter by ffa registered memory reference
+ * @value:	parameter by opaque value
+ * @octets:	parameter by octet string
+ *
+ * @attr & OPTEE_MSG_ATTR_TYPE_MASK indicates if tmem, rmem or value is used in
+ * the union. OPTEE_MSG_ATTR_TYPE_VALUE_* indicates value or octets,
+ * OPTEE_MSG_ATTR_TYPE_TMEM_* indicates @tmem and
+ * OPTEE_MSG_ATTR_TYPE_RMEM_* or the alias PTEE_MSG_ATTR_TYPE_FMEM_* indicates
+ * @rmem or @fmem depending on the conduit.
+ * OPTEE_MSG_ATTR_TYPE_NONE indicates that none of the members are used.
+ */
+struct optee_msg_param {
+	u64 attr;
+	union {
+		struct optee_msg_param_tmem tmem;
+		struct optee_msg_param_rmem rmem;
+		struct optee_msg_param_fmem fmem;
+		struct optee_msg_param_value value;
+		u8 octets[24];
+	} u;
+};
+
+/**
+ * struct optee_msg_arg - call argument
+ * @cmd: Command, one of OPTEE_MSG_CMD_* or OPTEE_MSG_RPC_CMD_*
+ * @func: Trusted Application function, specific to the Trusted Application,
+ *	     used if cmd == OPTEE_MSG_CMD_INVOKE_COMMAND
+ * @session: In parameter for all OPTEE_MSG_CMD_* except
+ *	     OPTEE_MSG_CMD_OPEN_SESSION where it's an output parameter instead
+ * @cancel_id: Cancellation id, a unique value to identify this request
+ * @ret: return value
+ * @ret_origin: origin of the return value
+ * @num_params: number of parameters supplied to the OS Command
+ * @params: the parameters supplied to the OS Command
+ *
+ * All normal calls to Trusted OS uses this struct. If cmd requires further
+ * information than what these fields hold it can be passed as a parameter
+ * tagged as meta (setting the OPTEE_MSG_ATTR_META bit in corresponding
+ * attrs field). All parameters tagged as meta have to come first.
+ */
+struct optee_msg_arg {
+	u32 cmd;
+	u32 func;
+	u32 session;
+	u32 cancel_id;
+	u32 pad;
+	u32 ret;
+	u32 ret_origin;
+	u32 num_params;
+
+	/* num_params tells the actual number of element in params */
+	struct optee_msg_param params[];
+};
+
+/**
+ * OPTEE_MSG_GET_ARG_SIZE - return size of struct optee_msg_arg
+ *
+ * @num_params: Number of parameters embedded in the struct optee_msg_arg
+ *
+ * Returns the size of the struct optee_msg_arg together with the number
+ * of embedded parameters.
+ */
+#define OPTEE_MSG_GET_ARG_SIZE(num_params) \
+	(sizeof(struct optee_msg_arg) + \
+	 sizeof(struct optee_msg_param) * (num_params))
+
+/*****************************************************************************
+ * Part 2 - requests from normal world
+ *****************************************************************************/
+
+/*
+ * Return the following UID if using API specified in this file without
+ * further extensions:
+ * 384fb3e0-e7f8-11e3-af63-0002a5d5c51b.
+ * Represented in 4 32-bit words in OPTEE_MSG_UID_0, OPTEE_MSG_UID_1,
+ * OPTEE_MSG_UID_2, OPTEE_MSG_UID_3.
+ */
+#define OPTEE_MSG_UID_0			0x384fb3e0
+#define OPTEE_MSG_UID_1			0xe7f811e3
+#define OPTEE_MSG_UID_2			0xaf630002
+#define OPTEE_MSG_UID_3			0xa5d5c51b
+#define OPTEE_MSG_FUNCID_CALLS_UID	0xFF01
+
+/*
+ * Returns 2.0 if using API specified in this file without further
+ * extensions. Represented in 2 32-bit words in OPTEE_MSG_REVISION_MAJOR
+ * and OPTEE_MSG_REVISION_MINOR
+ */
+#define OPTEE_MSG_REVISION_MAJOR	2
+#define OPTEE_MSG_REVISION_MINOR	0
+#define OPTEE_MSG_FUNCID_CALLS_REVISION	0xFF03
+
+/*
+ * Get UUID of Trusted OS.
+ *
+ * Used by non-secure world to figure out which Trusted OS is installed.
+ * Note that returned UUID is the UUID of the Trusted OS, not of the API.
+ *
+ * Returns UUID in 4 32-bit words in the same way as
+ * OPTEE_MSG_FUNCID_CALLS_UID described above.
+ */
+#define OPTEE_MSG_OS_OPTEE_UUID_0	0x486178e0
+#define OPTEE_MSG_OS_OPTEE_UUID_1	0xe7f811e3
+#define OPTEE_MSG_OS_OPTEE_UUID_2	0xbc5e0002
+#define OPTEE_MSG_OS_OPTEE_UUID_3	0xa5d5c51b
+#define OPTEE_MSG_FUNCID_GET_OS_UUID	0x0000
+
+/*
+ * Get revision of Trusted OS.
+ *
+ * Used by non-secure world to figure out which version of the Trusted OS
+ * is installed. Note that the returned revision is the revision of the
+ * Trusted OS, not of the API.
+ *
+ * Returns revision in 2 32-bit words in the same way as
+ * OPTEE_MSG_CALLS_REVISION described above.
+ */
+#define OPTEE_MSG_FUNCID_GET_OS_REVISION	0x0001
+
+/*
+ * Do a secure call with struct optee_msg_arg as argument
+ * The OPTEE_MSG_CMD_* below defines what goes in struct optee_msg_arg::cmd
+ *
+ * OPTEE_MSG_CMD_OPEN_SESSION opens a session to a Trusted Application.
+ * The first two parameters are tagged as meta, holding two value
+ * parameters to pass the following information:
+ * param[0].u.value.a-b uuid of Trusted Application
+ * param[1].u.value.a-b uuid of Client
+ * param[1].u.value.c Login class of client OPTEE_MSG_LOGIN_*
+ *
+ * OPTEE_MSG_CMD_INVOKE_COMMAND invokes a command a previously opened
+ * session to a Trusted Application.  struct optee_msg_arg::func is Trusted
+ * Application function, specific to the Trusted Application.
+ *
+ * OPTEE_MSG_CMD_CLOSE_SESSION closes a previously opened session to
+ * Trusted Application.
+ *
+ * OPTEE_MSG_CMD_CANCEL cancels a currently invoked command.
+ *
+ * OPTEE_MSG_CMD_REGISTER_SHM registers a shared memory reference. The
+ * information is passed as:
+ * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_TMEM_INPUT
+ *					[| OPTEE_MSG_ATTR_NONCONTIG]
+ * [in] param[0].u.tmem.buf_ptr		physical address (of first fragment)
+ * [in] param[0].u.tmem.size		size (of first fragment)
+ * [in] param[0].u.tmem.shm_ref		holds shared memory reference
+ *
+ * OPTEE_MSG_CMD_UNREGISTER_SHM unregisters a previously registered shared
+ * memory reference. The information is passed as:
+ * [in] param[0].attr			OPTEE_MSG_ATTR_TYPE_RMEM_INPUT
+ * [in] param[0].u.rmem.shm_ref		holds shared memory reference
+ * [in] param[0].u.rmem.offs		0
+ * [in] param[0].u.rmem.size		0
+ *
+ * OPTEE_MSG_CMD_DO_BOTTOM_HALF does the scheduled bottom half processing
+ * of a driver.
+ *
+ * OPTEE_MSG_CMD_STOP_ASYNC_NOTIF informs secure world that from now is
+ * normal world unable to process asynchronous notifications. Typically
+ * used when the driver is shut down.
+ */
+#define OPTEE_MSG_CMD_OPEN_SESSION	0
+#define OPTEE_MSG_CMD_INVOKE_COMMAND	1
+#define OPTEE_MSG_CMD_CLOSE_SESSION	2
+#define OPTEE_MSG_CMD_CANCEL		3
+#define OPTEE_MSG_CMD_REGISTER_SHM	4
+#define OPTEE_MSG_CMD_UNREGISTER_SHM	5
+#define OPTEE_MSG_CMD_DO_BOTTOM_HALF	6
+#define OPTEE_MSG_CMD_STOP_ASYNC_NOTIF	7
+#define OPTEE_MSG_FUNCID_CALL_WITH_ARG	0x0004
+
+#endif /* _OPTEE_MSG_H */