Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 279 insertions, 0 deletions

diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
new file mode 100644
index 000000000..e69bc6380
--- /dev/null
+++ b/drivers/tee/optee/rpc.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015-2021, Linaro Limited
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include "optee_private.h"
+#include "optee_rpc_cmd.h"
+
+static void handle_rpc_func_cmd_get_time(struct optee_msg_arg *arg)
+{
+	struct timespec64 ts;
+
+	if (arg->num_params != 1)
+		goto bad;
+	if ((arg->params[0].attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+			OPTEE_MSG_ATTR_TYPE_VALUE_OUTPUT)
+		goto bad;
+
+	ktime_get_real_ts64(&ts);
+	arg->params[0].u.value.a = ts.tv_sec;
+	arg->params[0].u.value.b = ts.tv_nsec;
+
+	arg->ret = TEEC_SUCCESS;
+	return;
+bad:
+	arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+#if IS_REACHABLE(CONFIG_I2C)
+static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
+					     struct optee_msg_arg *arg)
+{
+	struct optee *optee = tee_get_drvdata(ctx->teedev);
+	struct tee_param *params;
+	struct i2c_adapter *adapter;
+	struct i2c_msg msg = { };
+	size_t i;
+	int ret = -EOPNOTSUPP;
+	u8 attr[] = {
+		TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+		TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT,
+		TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT,
+		TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT,
+	};
+
+	if (arg->num_params != ARRAY_SIZE(attr)) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		return;
+	}
+
+	params = kmalloc_array(arg->num_params, sizeof(struct tee_param),
+			       GFP_KERNEL);
+	if (!params) {
+		arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+		return;
+	}
+
+	if (optee->ops->from_msg_param(optee, params, arg->num_params,
+				       arg->params))
+		goto bad;
+
+	for (i = 0; i < arg->num_params; i++) {
+		if (params[i].attr != attr[i])
+			goto bad;
+	}
+
+	adapter = i2c_get_adapter(params[0].u.value.b);
+	if (!adapter)
+		goto bad;
+
+	if (params[1].u.value.a & OPTEE_RPC_I2C_FLAGS_TEN_BIT) {
+		if (!i2c_check_functionality(adapter,
+					     I2C_FUNC_10BIT_ADDR)) {
+			i2c_put_adapter(adapter);
+			goto bad;
+		}
+
+		msg.flags = I2C_M_TEN;
+	}
+
+	msg.addr = params[0].u.value.c;
+	msg.buf  = params[2].u.memref.shm->kaddr;
+	msg.len  = params[2].u.memref.size;
+
+	switch (params[0].u.value.a) {
+	case OPTEE_RPC_I2C_TRANSFER_RD:
+		msg.flags |= I2C_M_RD;
+		break;
+	case OPTEE_RPC_I2C_TRANSFER_WR:
+		break;
+	default:
+		i2c_put_adapter(adapter);
+		goto bad;
+	}
+
+	ret = i2c_transfer(adapter, &msg, 1);
+
+	if (ret < 0) {
+		arg->ret = TEEC_ERROR_COMMUNICATION;
+	} else {
+		params[3].u.value.a = msg.len;
+		if (optee->ops->to_msg_param(optee, arg->params,
+					     arg->num_params, params))
+			arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		else
+			arg->ret = TEEC_SUCCESS;
+	}
+
+	i2c_put_adapter(adapter);
+	kfree(params);
+	return;
+bad:
+	kfree(params);
+	arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+#else
+static void handle_rpc_func_cmd_i2c_transfer(struct tee_context *ctx,
+					     struct optee_msg_arg *arg)
+{
+	arg->ret = TEEC_ERROR_NOT_SUPPORTED;
+}
+#endif
+
+static void handle_rpc_func_cmd_wq(struct optee *optee,
+				   struct optee_msg_arg *arg)
+{
+	if (arg->num_params != 1)
+		goto bad;
+
+	if ((arg->params[0].attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+			OPTEE_MSG_ATTR_TYPE_VALUE_INPUT)
+		goto bad;
+
+	switch (arg->params[0].u.value.a) {
+	case OPTEE_RPC_NOTIFICATION_WAIT:
+		if (optee_notif_wait(optee, arg->params[0].u.value.b))
+			goto bad;
+		break;
+	case OPTEE_RPC_NOTIFICATION_SEND:
+		if (optee_notif_send(optee, arg->params[0].u.value.b))
+			goto bad;
+		break;
+	default:
+		goto bad;
+	}
+
+	arg->ret = TEEC_SUCCESS;
+	return;
+bad:
+	arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static void handle_rpc_func_cmd_wait(struct optee_msg_arg *arg)
+{
+	u32 msec_to_wait;
+
+	if (arg->num_params != 1)
+		goto bad;
+
+	if ((arg->params[0].attr & OPTEE_MSG_ATTR_TYPE_MASK) !=
+			OPTEE_MSG_ATTR_TYPE_VALUE_INPUT)
+		goto bad;
+
+	msec_to_wait = arg->params[0].u.value.a;
+
+	/* Go to interruptible sleep */
+	msleep_interruptible(msec_to_wait);
+
+	arg->ret = TEEC_SUCCESS;
+	return;
+bad:
+	arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+}
+
+static void handle_rpc_supp_cmd(struct tee_context *ctx, struct optee *optee,
+				struct optee_msg_arg *arg)
+{
+	struct tee_param *params;
+
+	arg->ret_origin = TEEC_ORIGIN_COMMS;
+
+	params = kmalloc_array(arg->num_params, sizeof(struct tee_param),
+			       GFP_KERNEL);
+	if (!params) {
+		arg->ret = TEEC_ERROR_OUT_OF_MEMORY;
+		return;
+	}
+
+	if (optee->ops->from_msg_param(optee, params, arg->num_params,
+				       arg->params)) {
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+		goto out;
+	}
+
+	arg->ret = optee_supp_thrd_req(ctx, arg->cmd, arg->num_params, params);
+
+	if (optee->ops->to_msg_param(optee, arg->params, arg->num_params,
+				     params))
+		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
+out:
+	kfree(params);
+}
+
+struct tee_shm *optee_rpc_cmd_alloc_suppl(struct tee_context *ctx, size_t sz)
+{
+	u32 ret;
+	struct tee_param param;
+	struct optee *optee = tee_get_drvdata(ctx->teedev);
+	struct tee_shm *shm;
+
+	param.attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
+	param.u.value.a = OPTEE_RPC_SHM_TYPE_APPL;
+	param.u.value.b = sz;
+	param.u.value.c = 0;
+
+	ret = optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_ALLOC, 1, &param);
+	if (ret)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_lock(&optee->supp.mutex);
+	/* Increases count as secure world doesn't have a reference */
+	shm = tee_shm_get_from_id(optee->supp.ctx, param.u.value.c);
+	mutex_unlock(&optee->supp.mutex);
+	return shm;
+}
+
+void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
+{
+	struct tee_param param;
+
+	param.attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INOUT;
+	param.u.value.a = OPTEE_RPC_SHM_TYPE_APPL;
+	param.u.value.b = tee_shm_get_id(shm);
+	param.u.value.c = 0;
+
+	/*
+	 * Match the tee_shm_get_from_id() in cmd_alloc_suppl() as secure
+	 * world has released its reference.
+	 *
+	 * It's better to do this before sending the request to supplicant
+	 * as we'd like to let the process doing the initial allocation to
+	 * do release the last reference too in order to avoid stacking
+	 * many pending fput() on the client process. This could otherwise
+	 * happen if secure world does many allocate and free in a single
+	 * invoke.
+	 */
+	tee_shm_put(shm);
+
+	optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, &param);
+}
+
+void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
+		   struct optee_msg_arg *arg)
+{
+	switch (arg->cmd) {
+	case OPTEE_RPC_CMD_GET_TIME:
+		handle_rpc_func_cmd_get_time(arg);
+		break;
+	case OPTEE_RPC_CMD_NOTIFICATION:
+		handle_rpc_func_cmd_wq(optee, arg);
+		break;
+	case OPTEE_RPC_CMD_SUSPEND:
+		handle_rpc_func_cmd_wait(arg);
+		break;
+	case OPTEE_RPC_CMD_I2C_TRANSFER:
+		handle_rpc_func_cmd_i2c_transfer(ctx, arg);
+		break;
+	default:
+		handle_rpc_supp_cmd(ctx, optee, arg);
+	}
+}
+
+